ESMO2023:恩扎卢胺联合雄激素剥夺治疗对比安慰剂联合雄激素剥夺治疗在中国转移性激素敏感性前列腺癌患者中的疗效和安全性(中国ARCHES)

2019年发表的全球ARCHES试验(NCT02677896)结果显示,与安慰剂(placebo,PBO)+雄激素剥夺治疗(androgen deprivation therapy,ADT)相比,恩扎卢胺+ADT延长了转移性激素敏感性前列腺癌(metastatic hormone-sensitive prostate cancer,mHSPC)患者的总生存期和放射影像学无进展生存期(radiographic progression-free survival,rPFS)^([1])。然而,该试验无中国患者入组。欧洲肿瘤内科学会(European Society for Medical Oncology,ESMO)2023年会议报道了中国ARCHES研究(NCT04076059)的初步结果,这是一项评估恩扎卢胺+ADTvs.PBO+ADT在中国m HSPC患者中的疗效和安全性的多中心、随机、双盲、PBO对照的Ⅲ期试验^([2])。

Health diagnosis of ultrahigh arch dam performance using heterogeneous spatial panel vector model

Currently,more than ten ultrahigh arch dams have been constructed or are being constructed in China.Safety control is essential to long-term operation of these dams.This study employed the flexibility coefficient and plastic complementary energy norm to assess the structural safety of arch dams.A comprehensive analysis was conducted,focusing on differences among conventional methods in characterizing the structural behavior of the Xiaowan arch dam in China.Subsequently,the spatiotemporal characteristics of the measured performance of the Xiaowan dam were explored,including periodicity,convergence,and time-effect characteristics.These findings revealed the governing mechanism of main factors.Furthermore,a heterogeneous spatial panel vector model was developed,considering both common factors and specific factors affecting the safety and performance of arch dams.This model aims to comprehensively illustrate spatial heterogeneity between the entire structure and local regions,introducing a specific effect quantity to characterize local deformation differences.Ultimately,the proposed model was applied to the Xiaowan arch dam,accurately quantifying the spatiotemporal heterogeneity of dam performance.Additionally,the spatiotemporal distri-bution characteristics of environmental load effects on different parts of the dam were reasonably interpreted.Validation of the model prediction enhances its credibility,leading to the formulation of health diagnosis criteria for future long-term operation of the Xiaowan dam.The findings not only enhance the predictive ability and timely control of ultrahigh arch dams'performance but also provide a crucial basis for assessing the effectiveness of engineering treatment measures.

A new method of calculating crown projection area and its comparative accuracy with conventional calculations for asymmetric tree crowns

This paper introduces a new method of calculating crown projection area(CPA),the area of level ground covered by a vertical projection of a tree crown from measured crown radii through numerical interpolation and integration.This novel method and other four existing methods of calculating CPA were compared using detailed crown radius measurements from 30 tall trees of Eucalyptus pilularis variable in crown size,shape,and asymmetry.The four existing methods included the polygonal approach and three ways of calculating CPA as the area of a circle using the arithmetic,geometric and quadratic mean radius.Comparisons were made across a sequence of eight non-consecutive numbers(from 2 to 16)of measured crown radii for each tree over the range of crown asymmetry of the 30 trees through generalized linear models and multiple comparisons of means.The sequence covered the range of the number of crown radii measured for calculating the CPA of a tree in the literature.A crown asymmetry index within the unit interval was calculated for each tree to serve as a normative measure.With a slight overestimation of 2.2%on average and an overall mean error size of 7.9%across the numbers of crown radii that were compared,our new method was the least biased and most accurate.Calculating CPA as a circle using the quadratic mean crown radius was the second best,which had an average overestimation of 4.5%and overall mean error size of 8.8%.These two methods remained by and large unbiased as crown asymmetry increased,while the other three methods showed larger bias of underestimation.For the conventional method of using the arithmetic mean crown radius to calculate CPA as a circle,bias correction factors were developed as a function of crown asymmetry index to delineate the increasing magnitude of bias associated with greater degrees of crown asymmetry.This study reveals and demonstrates such relationships between the accuracy of CPA calculations and crown asymmetry and will help increase awareness among researchers and practitioners on the existence of bias in their CPA calculations and for the need to use an unbiased method in the future.Our new method is recommended for calculating CPA where at least four crown radius measurements per tree are available because that is the minimum number required for its use.

Differential modulation of crown allometry and stem growth at gap edges in five European tree species by drought conditions

Background In Central Europe,forests are increasingly affected by various disturbances,resulting in an increasing gap formation in the canopy.In order to support goal-oriented management,more knowledge is required about the acclimation of the crown and its effects on the basal area growth of trees at the edge of a gap.Methods This work compared trees'growth and crown structure at the edge of a transient gap,with a gap size of more than 80m^(2),with trees in the stand that were at least 30m away from the gap.A total of 249 European beeches(Fagus sylvatica L.),Norway spruces(Picea abies L.Karst),Scots pines(Pinus sylvestris L.),oaks(Quercus spp.;Quercus petraea(Matt.)Liebl.,Quercus robur L.),and silver firs(Abies alba Mill.)were examined on long-term experimental plots in southern Germany.Various crown measures were developed and calculated using high-resolution terrestrial laser scanning(TLiDAR)to capture the three-dimensional crown structures.Growth responses to edge conditions were measured based on tree rings.Using linear mixed models,we predict the basal area increment of edge trees relative to trees in the stand under wet and dry soil moisture conditions after the gap formation.Results We identified i)species-specific acclimation of the crown of edge trees after the gap formation,ii)under wet soil moisture conditions a growth increase of 25%–45%for beech,pine,and oak edge trees and growth losses of 5%–60%for spruce and fir and iii)coniferous tree species benefited from the edge position regarding their basal area increment under dry soil moisture conditions and deciduous tree species grew regardless of the soil moisture conditions at the edge of a gap.Conclusion Gaps have a species-specific effect on the habitus and growth of edge trees and can have both positive and negative impacts on silviculture.

Interfacial engineering through lead binding using crown ethers in perovskite solar cells

In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an approach that not only rectifies lead leakage but also places paramount importance on the attainment of rigorous interfacial passivation.Crown ethers,notably benzo-18-crown-6-ether(B18C6),were strategically integrated at the perovskite-hole transport material interface.Crown ethers exhibit a dual role:efficiently sequestering and immobilizing Pb^(2+)ions through host-guest complexation and simultaneously establishing a robust interfacial passivation layer.Selected crown ether candidates,guided by density functional theory(DFT)calculations,demonstrated proficiency in binding Pb2+ions and optimizing interfacial energetics.Photovoltaic devices incorporating these materials achieved exceptional power conversion efficiency(PCE),notably 21.7%for B18C6,underscoring their efficacy in lead binding and interfacial passivation.Analytical techniques,including time-of-flight secondary ion mass spectrometry(ToF-SIMS),ultraviolet photoelectron spectroscopy(UPS),time-resolved photoluminescence(TRPL),and transient absorption spectroscopy(TAS),unequivocally affirmed Pb^(2+)ion capture and suppression of non-radiative recombination.Notably,these PSCs maintained efficiency even after enduring 300 h of exposure to 85%relative humidity.This research underscores the transformative potential of crown ethers,simultaneously addressing lead binding and stringent interfacial passivation for sustainable PSCs poised to commercialize and advance renewable energy applications.

Numerical Simulation Analysis of Welded Joints in Arch Ribs of Large Span Steel Pipe Arch Bridges

In order to study the residual stress distribution law of welded joints of arch ribs of large-span steel pipe concrete arch bridges,numerical simulation of temperature,stress and strain fields based on ABAQUS for welded joints of arch-ribbed steel tubes using 7-,8-and 9-layer welds is carried out and its accuracy is demonstrated.The steel pipe welding temperature changes,residual stress distribution,different processes residual stress changes in the law,the prediction of post-weld residual stress distribution and deformation are studied in this paper.The results show that the temperature field values and test results are more consistent with the accuracy of numerical simulation of welding,the welding process is mainly in the form of heat transfer;Residual high stresses are predominantly distributed in the Fusion zone(FZ)and Heat-affected zone(HAZ),with residual stress levels tending to decrease from the center of the weld along the axial path,the maximum stress appears in the FZ and HAZ junction;The number of welding layers has an effect on the residual stress distribution,the number of welding layers increases,the residual stress tends to decrease,while the FZ and HAZ high stress area range shrinks;Increasing the number of plies will increase the amount of residual distortion.

A Nonlinear Explicit Model of A Non-Circular Subsea Tunnel-Liner System with An FGM Inverted Arch Under Mechanical Loading and Fire Fields

This paper proposes an explicit scheme to analyze the failure of a subsea polyhedral tunnel-liner system with an inverted arch under mechanical loading and fire fields.The thin-walled liner is made of Functionally Graded Materials(FGMs),which may improve the stability behavior of the tunnel-liner system.Hydrostatic pressure is inevitable in the liner since underground water may penetrate the cracks of the tunnel,and reach the outer surface of the liner.In addition,an elevated temperature loading is taken into account,considering that fire may occur in the tunnel-liner system.Under the combination of mechanical loading and thermal loading,the liner deforms into a single-lobe shape,which is depicted by a trigonometric function.The total potential energy is expressed quantitatively after the energy approach and thin-walled shell theory are used.The minimum potential energy is obtained when the critical buckling occurs.The critical buckling pressure is calculated,which considers the effect of the thermal field.The present analytical prediction is subsequently compared precisely with other closed-form solutions.Finally,the effects of several parameters,such as the geometric shapes,temperature variations,and volume fraction indices,are discussed to further survey the buckling performance of the nonlinear buckling of an FGM polyhedral liner with an inverted arch.One may address a polyhedral liner with fewer polyhedral sides,and a lower volume fraction index is recommended to rehabilitate cracked tunnels in engineering applications.

Prediction model of surrounding rock deformation in doublecontinuous-arch tunnel based on the ABC-WNN

Purpose–The wavelet neural network(WNN)has the drawbacks of slow convergence speed and easy falling into local optima in data prediction.Although the artificial bee colony(ABC)algorithm has strong global optimization ability and fast convergence speed,it also has the drawbacks of slow speed while finding the optimal solution and weak optimization ability in the later stage.Design/methodology/approach–This article uses an ABC algorithm to optimize the WNN and establishes an ABC-WNN analysis model.Based on the example of the Jinan Yuhan underground tunnel project,the deformation of the surrounding rock of the double-arch tunnel crossing the fault fracture zone is predicted and analyzed,and the analysis results are compared with the actual detection amount.Findings–The comparison results show that the predicted values of the ABC-WNN model have a high degree of fitting with the actual engineering data,with a maximum relative error of only 4.73%.On this basis,the results show that the statistical features of ABC-WNN are the lowest,with the errors at 0.566 and 0.573,compared with the single back propagation(BP)neural network model and WNN model.Therefore,it can be derived that the ABC-WNN model has higher prediction accuracy,better computational stability and faster convergence speed for deformation.Originality/value–This article uses firstly the ABC-WNN for the deformation analysis of double-arch tunnels.This attempt laid the foundation for artificial intelligence prediction in deformation analysis of multiarch tunnels and small clearance tunnels.It can provide a new and effective way for deformation prediction in similar projects.

Effects of comprehensive nursing with cognitive behavioral therapy in orthodontic osteodilated arch treatment

BACKGROUND This work explored the effects of cognitive behavior therapy(CBT)-based comprehensive nursing intervention(CNI)mode in arch expansion to treat patients with orthodontic osteodilated arch(OOA).AIM To explore the application effect of CBT-based CNI model in orthodontic expansion arch treatment.METHODS Using convenient sampling method,81 patients with OOA were selected and rolled into a control group(Ctrl group,40 cases)and an observation group(Obs group,41 cases).During the treatment,patients in the Ctrl group received routine nursing intervention mode,and the those in the Obs group received CBT mode on the basis of this.Before and after intervention,the incidence of oral mucositis,the mastery rate of correct arch expansion method,self-rating anxiety scale score,soft scale index,and plaque index were compared for patients in different groups.In addition,satisfaction and complications were comparatively analyzed.RESULTS Incidence of oral mucositis in the Obs group was lower(14.6%vs 38.5%),and the mastery rate of correct arch expansion method was obviously higher(90.2%vs 55.0%)was obviously higher(all P<0.05).Meanwhile,the soft scale index and plaque index in the Obs group were much lower(P<0.05).The compliance(90.24%)and satisfaction(95.12%)in the Obs group were greatly higher(P<0.05).CONCLUSION The CBT-based CNI mode greatly improved the mastery rate of correct arch expansion method during arch expansion in treating patients with OOA and enhanced the therapeutic effect of arch expansion and the oral health of patients,improving the patient compliance.

基于SARIMA-ARCH的电量预测模型

电量预测是供电单位购电的重要依据,是电力经济稳定运行的根本基础。提出采用SARIMA-ARCH融合模型对某地区售电量进行预测。首先,采用季节时间序列分析方法(SARIMA)对月度电量时间序列进行建模,通过ACF和PACF图筛选确定出最佳模型阶数,得到季节性时间序列模型(SARIMA)基础预测模型;提取模型残差的波动性,建立自回归条件异方差(ARCH)模型;最后,将SARIMA-ARCH模型与常规SRIAM和ARIMA的预测值进行对比分析。结果表明,SARIMAARCH混合模型的预测精度较高。

基于ARCH族模型的股票超高频数据的波动性研究——以浦发银行为例

论文基于浦发银行股票的逐笔交易数据,利用ARCH族模型对其超高频数据中的波动性进行了研究。论文首先通过对数据的预处理和单位根检验,确保了数据的平稳性,随后应用多种ARCH族模型对波动性进行建模与比较,最终选择TGARCH(2,1,1)模型作为最优模型。该模型不仅能够捕捉数据中的波动集聚效应,还揭示了显著的波动非对称性。研究结果表明,浦发银行的股票收益波动性具有显著的持久性和杠杆效应,负面冲击对波动的影响大于正面冲击。基于这些发现,论文提出了加强高频交易监管、优化投资策略和强化风险管理等政策启示。

Research on Crown Grafting of Seedling Cashew Trees

Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different heights by stem grafting and bark grafting. [Result] The best cutting stem height of cashew should be in 100-150 cm, when the number of new germinated shoots was 85.5-87.7. Stem grafting could significantly improve the survival rate of the shooting branch （92.7%）, growth condition of which was better than that of bark grafting, and it also had no clip cortex. The yield of stem grafting was significantly higher than that of bark grafting, and it could reach up to 18.1 kg/plant in 4 years. The branches from stem grafting had significantly better ability in resisting the wind damage than those from bark grafting. [Conclusion] The study provided references for the crown grafting of cashew planting in China.

Nonlinear mixed-effects height to crown base and crown length dynamic models using the branch mortality technique for a Korean larch( Larix olgensis ) plantations in northeast China

Korean larch(Larix olgensis)is one of the main tree species for aff orestation and timber production in northeast China.However,its timber quality and growth ability are largely infl uenced by crown size,structure and shape.The majority of crown models are static models based on tree size and stand characteristics from temporary sample plots,but crown dynamic models has seldom been constructed.Therefore,this study aimed to develop height to crown base(HCB)and crown length(CL)dynamic models using the branch mortality technique for a Korean larch plantation.The nonlinear mixed-eff ects model with random eff ects,variance functions and correlation structures,was used to build HCB and CL dynamic models.The data were obtained from 95 sample trees of 19 plots in Meng JiaGang forest farm in Northeast China.The results showed that HCB progressively increases as tree age,tree height growth(HT growth)and diameter at breast height growth(DBH growth).The CL was increased with tree age in 20 years ago,and subsequently stabilized.HT growth,DBH growth stand basal area(BAS)and crown competition factor(CCF)signifi cantly infl uenced HCB and CL.The HCB was positively correlated with BAS,HT growth and DBH growth,but negatively correlated with CCF.The CL was positively correlated with BAS and CCF,but negatively correlated with DBH growth.Model fi tting and validation confi rmed that the mixed-eff ects model considering the stand and tree level random eff ects was accurate and reliable for predicting the HCB and CL dynamics.However,the models involving adding variance functions and time series correlation structure could not completely remove heterogeneity and autocorrelation,and the fi tting precision of the models was reduced.Therefore,from the point of view of application,we should take care to avoid setting up over-complex models.The HCB and CL dynamic models in our study may also be incorporated into stand growth and yield model systems in China.

Segmented taper equations with crown ratio and stand density for Dahurian Larch (Larix gmelinii) in Northeastern China

Segmented taper equation was selected to model stem profile of Dahurian larch （Larix gmelinii Rupr.）. The data were based on stem analysis of 74 trees from Dailing Forest Bureau in Heilongjiang Province, Northeastern China. Two taper equations with crown ratio and stand basal area were derived from the Max and Burkhart’s （1976） taper equation. Three taper equations were evaluated： （1） the original equation, （2） the original equation with crown ratio, and （3） the original equation with basal area. SAS NLIN and SYSNLIN procedures were used to fit taper equations. Fit statistics and cross-validation were used to evaluate the accuracy and precision of these models. Parameter estimates showed that the original equation with inclusion of crown ratio and basal area variables provided significantly different parameter estimates with lower standard errors. Overall fit statistics indicated that the root mean square error （RMSE） for diameter outside and inside bark decreased respectively by 10% and 7% in the original model with crown ratio and by 12% and 7.2% in the original model with basal area. Cross-validation further confirmed that the original equation with inclusion of crown ratio and basal area variables provided more accurate predictions at the lower section （relative heights, 10%） and upper section （relative heights, 50%） for both outside and inside bark diameters.

MODELS FOR CROWN STRUCTURE OF LARCH PLANTATION

Based on the temporary plots of circle clear cutting for larch (Larix olgensis Henry) plantation, the tree and stand crown structure were studied by using the approach of branch analysis for each tree of the plot. the results of this work indicated that in stand the tree crown form is as same as different tree size (DBH and H). So the tree’s crown structure can be characterized by using averaged crown taper of the stand. Therefore, the different stand conditions are correlated with stand age, site index and stand density. Estimation models of stand crown structure are developed by regression and the model can be used to develop the stand growth and management models.

Changes in the crown angulation and dental arch widths after nonextraction orthodontic treatment: Model analysis of mild crowding with high canines

This study was undertaken to examine which factors contributed to the correction of crowding in two patients who underwent nonextraction orthodontic treatment. A study model analysis was conducted to determine the effects of the orthodontic treatment for crowding with high canines on crown angulation and dental arch width in two patients. The results showed that the crown angulation was significantly increased, indicating distal tipping in the maxillary dental arch. This tendency was most commonly observed in the premolars among the lateral teeth. With respect to the dental arch width, the largest change was evident in the first molar and first premolar regions in cases 1 and 2, respectively. On the basis of these results, up-righting of mesially tipped lateral teeth and expansion of narrow dental arches could prove to be the keys to the success of space regaining or correction of high canines and mild crowding.

Irradiance and Developmental Stages of Crown Architecture Affect Shoot Production in <i>Rhododendron reticulatum</i>

Plasticity in crown architecture, contributing to leaf arrangement within crown, is an important feature for whole plant carbon assimilation and survival. In this study, I examined the plasticity in crown architecture to light condition and developmental stage by the changes in shoot production. Rhododendron reticulatum expands crown with orthotropic growth in monopodial branching in young stage, but orthotropic growth is ceased in adult stage. Main stem of young crown is described with monopodial branching regardless of light environment. But multi-layer crown is observed in sun-lit environment rather than mono-layer crown in adult stage. Long shoot production for each branching system (foliage derived from sympodial branching) in young crown is associated with local light environment, but not in adult crown. Long shoot production rate is correlated with long shoot production rate of its mother shoot in young crown, but not in mono-layer crown. These results suggest that young crown expands branches to sun-lit position whereas adult crown reduces congestion of shoots with stochastic shoot production regardless of shoot production of mother shoots. I concluded that both light and developmental stage are important factors for shoot production and constructing crown architecture.

Mechanical properties and influence mechanism of confined concrete arches in high-stress tunnels

Deep underground projects(e.g., coal mines), are often faced with complex conditions such as high stress and extremely soft rock. The strength and rigidity of the traditional support system are often insufficient,which makes it difficult to meet the requirements of ground control under complex conditions. As a new support form with high strength and rigidity, the confined concrete arch plays an important role in controlling the rock deformation under complex conditions. The section shape of the tunnel has an important impact on the mechanical properties and design of the support system. However, studies on the mechanical properties and influence mechanism of the new confined concrete arch are rarely reported. To this end, the mechanical properties of traditional U-shaped steel and new confined concrete arches are compared and comparative tests on arches of circular and straight-leg semicircular shapes in deep tunnels are conducted. A large mechanical testing system for underground engineering support structure is developed. The mechanical properties and influence mechanism of confined concrete arches with different section shapes under different loading modes and cross-section parameters are systematically studied. Test results show that the bearing capacity of the confined concrete arch is 2.10 times that of the U-shaped steel arch, and the bearing capacity of the circular confined concrete arch is 2.27 times that of the straight-leg semicircular arch. Among the various influencing factors and their engineering parameters,the lateral stress coefficient has the greatest impact on the bearing capacity of the confined concrete arch,followed by the steel pipe wall thickness, steel strength, and core concrete strength. Subsequently, the economic index of bearing capacity and cost is established, and the optimization design method for the confined concrete arch is proposed. Finally, this design method is applied to a high-stress tunnel under complex conditions, and the deformation of the surrounding rock is effectively controlled.

Erratum to “Irradiance and Developmental Stages of Crown Architecture Affect Shoot Production in <i>Rhododendron reticulatum</i>” [American Journal of Plant Sciences 4 (2013) 69-76]

The original online version of this article (Yoshimura, K. (2013) Irradiance and Developmental Stages of Crown Architecture Affect Shoot Production in Rhododendron reticulatum. American Journal of Plant Sciences, 4, 69-76. http://dx.doi.org/10.4236/ajps.2013.45A011) was published as a single-author paper mistakenly. To reflect the contribution and responsibility of the second author as well as the affiliations of the authors at the time of the study, we have revised the authorship and author affiliations of this article. The author wishes to correct the errors as: Kenichi Yoshimura1,2, Hiroaki Ishii1 1Graduate School of Science and Technology, Kobe University, Kobe, Japan 2Present Address: Center for Ecological Research, Kyoto University, Otsu, Japan Email: y.shimuken@gmail.

Fusarium pseudograminearum and F.culmorum affect the root system architecture of bread wheat

Yield losses of bread wheat due to crown rot can be more severe when drought conditions occur during the grain-filling period.Root architecture characteristics are important for soil exploration and belowground resource acquisition and are essential for adaptation to water-limited environments.Traits such as root angle,length and density have been strongly associated with acquisition efficiency and contribute to yield stability of the crop.The impact of crown rot pathogens on wheat root architecture is poorly understood.We examined differences in root angle,length and number,as well as dry root weight of the crown rot-susceptible bread wheat cultivar,Livingston inoculated with one of two crown rot pathogens Fusarium culmorum or Fusarium pseudograminearum in a transparent-sided root observation chamber.Significant adverse impacts on plant health and growth were revealed by visual discolouration of the leaf sheaths;fresh and dry shoot weight;leaf area of the oldest and the youngest fully expanded leaf and leaf number.Values of most recorded root system measurements were reduced when inoculated with either F.culmorum or F.pseudograminearum.In contrast,root angle was increased in the presence of F.culmorum but was not significantly changed by F.pseudograminearum.The development of whiteheads and grain losses in bread wheat caused by crown rot have previously been associated with blockages of the vascular systems.The method employed here was able to identify differences in the pathogen impacts on roots,which were not detected using previous systems.This research indicates that in the presence of F.culmorum and F.pseudograminearum infection,not only reductions in the size and biomass of the shoot system but also changes in the length,biomass and architecture of the root system could play an important role in yield loss.