Liquefaction and post-liquefaction behaviors of sands affected by immersion-induced degradation of crushed mudstone

A series of undrained triaxial tests was conducted to investigate the effect of crushed mudstone with the immersion-induced degradation on the liquefaction and post-liquefaction properties,and the undrained shearing behavior without precedent cyclic-loading histories of sands containing crushed mudstone.The tested materials with a main particle diameter of 2-0.85 mm were prepared by mixing sands and crushed mudstone to reach the prescribed mudstone content defined by dry mass ranging from 0% to 50%.The mixtures were subjected to immersion under a certain stress level and were subsequently tested.In addition,one-dimensional compression tests were also supplementally performed to visually observe the immersion-induced degradation of crushed mudstone.The test results mainly showed that: (1) the liquefaction resistance,the post-liquefaction undrained strength,and the undrained strength without a precedent cyclic-loading history decreased significantly with increasing mudstone content,M c ,up to 20%;(2) even a small amount of crushed mudstone affected these strengths;(3) the above-mentioned large reductions in the strengths were attributed to the immersion-induced degradation of crushed mudstone;(4) at M_(c) >20%,the liquefaction resistance increased while the significant increase in the undrained static strengths with and without precedent cyclic-loading histories was not observed;and (5) the increase in the liquefaction resistance at M_(c) >20% may have been attributed to both the gradual increase in the plasticity and the formation of the soil aggregates among deteriorated crushed mudstone,while the increase in the specimen density did not play an important role in such behavior.

Discussion on Dust Removal(Suppression)System of Crushing Station in Open-Pit Coal Mine

This paper introduces the method of coal dust treatment in crushing station and the present situation of dust removal system in typical open-pit coal mine crushing station in China,and expounds the research idea of determining comprehensive dust removal(suppression)system in crushing station inspired by the working principle of"range hood".Based on the design example and link optimization of the crush-ing station of open-pit coal mine I of Thar coalfield,this paper finally draws some conclusions on the key technologies of dust removal(suppression)system of open-pit coal mine crushing station.This study has certain reference value for the technical innovation of dust removal(suppression)system in crushing station,the realization of green mining in"crushing link",and the reduction and avoidance of ecological environment pollution in mining area.

IVUS引导下Step-Crush术治疗左主干分叉病变对支架贴壁情况及患者预后的影响

目的:分析血管内超声(IVUS)引导下Step-Crush术治疗左主干分叉病变对支架贴壁情况及患者预后的影响。方法:回顾分析2021年3月—2022年12月于九江市第一人民医院总院心血管内科就诊的左主干分叉病变患者60例,根据手术方式将患者分为IVUS组(n=34,采用IVUS引导下StepCrush术)和常规组(n=26,采用常规Step-Crush术)。对比两组支架情况(最大支架直径、左主干支架长度、支架贴壁不良发生率、支架边缘夹层发生率)、球囊参数(球囊最大直径、球囊最大压力)、心功能指标[左室射血分数(LVEF)、左室舒张末内径(LVEDD)]及心血管不良事件发生率。结果:相较于常规组,IVUS组最大支架直径、左主干支架长度、球囊最大直径均更长,球囊最大压力更大(P<0.05);术后2个月,IVUS组LVEF较常规组更高,LVEDD较常规组更低,差异均有统计学意义(P<0.05);IVUS组支架贴壁不良发生率、心血管不良事件发生率均更低,差异均有统计学意义(P<0.05)。两组支架边缘夹层发生率对比,差异无统计学意义(P>0.05)。结论:IVUS应用于Step-Crush术中可改善左主干分叉病变患者支架置入情况,降低支架贴壁发生率,有效预防心血管不良事件发生。

Dynamic crushing behaviors and enhanced energy absorption of bio-inspired hierarchical honeycombs with different topologies

In order to pursue good crushing load uniformity and enchance energy absorption efficiency of conventional honeycombs, a kind of bio-inspired hierarchical honeycomb model is proposed by mimicking the arched crab shell structures. Three bio-inspired hierarchical honeycombs(BHHs) with different topologies are designed by replacing each vertex of square honeycombs with smaller arc-shaped structures. The effects of hierarchical topologies and multi-material layout on in-plane dynamic crushings and absorbed-energy capacities of the BHHs are explored based on the explicit finite element(FE) analysis.Different deformation modes can be observed from the BHHs, which mainly depend upon hierarchical topologies and impact velocities. According to energy efficiency method and one-dimensional(1D) shock theory, calculation formulas of densification strains and plateau stresses for the BHHs are derived to characterize the dynamic bearing capacity, which is consistent well with FE results. Compared with conventional honeycombs, the crushing load efficiency and energy absorption capacity of the BHHs can be improved by changing the proper hierarchical topology and multi-material layout. These researches will provide theoretical guidance for innovative design and dynamic response performance controllability of honeycombs.

Effects of coals microscale structural features on their mechanical properties,propensity to crushing and fine dust formation

The work is dedicated to revealing the structural features of coals with different ranks,such as anthracites,metaanthracite and graphite,that determine their ability to crush and form fine dust.For this purpose,a combination of various nanoin-dentation techniques and Raman spectroscopy was used.The mechanical behavior of the selected coals was investigated by cyclic nanoindentation with increasing peak load and quasi-static loading.The alteration of the mechanical properties was studied by analysis of elastic moduli and damage indices Rw.Three groups of coals were identified based on their propensity to crushing during cyclic nanoindentation.Coals assigned to the first and second groups are characterized by local destruction in the contact zone with the indenter and the formation of a core of crushed material.Coals assigned to the third group are characterized by bulk destruction(outside the zone of contact with the indenter).In general,the ability of coals to fracture under mechanical loading decreases in the series of metamorphism due to microscale compaction of vitrinite matter.In the series of anthracite,metaanthracite and graphite,it is established that the coal matter compaction takes place for the anthracite and metaanthracite,whereas graphite reveals rather different behavior due to abrupt change of its structure.The ratios between the amorphous and crystalline phases of carbon(S)were determined by deconvolution of coals Raman spectra.The propensity of coals to crushing(a damage index Rw)increases with growth of the proportion of amorphous carbon in the coal matter.For the considered coals and metaanthracite,it is established that the proneness to destruction outside the contact zone with the indenter is determined by the ratio of amorphous and crystalline carbon of 1 and higher.When S parameter is lower than 1,the coals are being crushed only in the zone of contact with the indenter.

Dynamic crushing behavior and energy absorption of hybrid auxetic metamaterial inspired by Islamic motif art

Auxetic honeycomb structures are promising metamaterials with outstanding mechanical properties,and can be potentially used in energy absorption applications.In this study,a novel modified re-entrant hybrid auxetic metamaterial inspired by Islamic motif art is designed by integrating four-pointed double re-entrant motifs with symmetric semi-hexagonal unit cells to achieve a high energy absorption capacity(EAC).Theoretical analyses and numerical simulations are performed to examine the dynamic crushing behavior of the four-pointed double re-entrant combined structure(FDRCS).The developed finite element models(FEMs)are validated by the experiments under quasi-static compression.The deformation mode and stress-strain curves are further studied under low,medium,and high crushing velocities.The theoretically predicted plateau stress of the FDRCS under different crushing velocities is consistent with the numerical simulation results.The crushing stress and the EAC of the FDRCS are influenced by the geometric parameters and crushing velocities.The FDRCS exhibits a negative Poisson's ratio(NPR),owing to the four-point re-entrant structure(RES).Moreover,the specific energy absorption(SEA)of these structures is higher than that of nonauxetic hexagonal and auxetic re-entrant structures,owing to the generation of more plastic hinges that dissipate more energy during dynamic crushing.

Charcot-Marie-Tooth-1A and sciatic nerve crush rat models:insights from proteomics

The sensorimotor and histological aspects of peripheral neuropathies were already studied by our team in two rat models:the sciatic nerve crush and the Charcot-Marie-Tooth-1A disease.In this study,we sought to highlight and compare the protein signature of these two pathological situations.Indeed,the identification of protein profiles in diseases can play an important role in the development of pharmacological targets.In fact,Charcot-Marie-Tooth-1A rats develop motor impairments that are more severe in the hind limbs.Therefore,for the first time,protein expression in sciatic nerve of Charcot-Marie-Tooth-1A rats was examined.First,distal sciatic nerves were collected from Charcot-Marie-Tooth-1A and uninjured wild-type rats aged 3 months.After protein extraction,sequential window acquisition of all theoretical fragment ion spectra liquid chromatography and mass spectrometry was employed.445 proteins mapped to Swiss-Prot or trEMBL Uniprot databases were identified and quantified.Of these,153 proteins showed statistically significant differences between Charcot-Marie-Tooth-1A and wild-type groups.The majority of these proteins were overexpressed in Charcot-Marie-Tooth-1A.Hierarchical clustering and functional enrichment using Gene Ontology were used to group these proteins based on their biological effects concerning Charcot-Marie-Tooth-1A pathophysiology.Second,proteomic characterization of wild-type rats subjected to sciatic nerve crush was performed sequential window acquisition of all theoretical fragment ion spectra liquid chromatography and mass spectrometry.One month after injury,distal sciatic nerves were collected and analyzed as described above.Out of 459 identified proteins,92 showed significant differences between sciatic nerve crush and the uninjured wild-type rats used in the first study.The results suggest that young adult Charcot-Marie-Tooth-1A rats(3 months old)develop compensatory mechanisms at the level of redox balance,protein folding,myelination,and axonogenesis.These mechanisms seem insufficient to hurdle the progress of the disease.Notably,response to oxidative stress appears to be a significant feature of Charcot-Marie-Tooth-1A,potentially playing a role in the pathological process.In contrast to the first experiment,the majority of the proteins that differed from wild-type were downregulated in the sciatic nerve crush group.Functional enrichment suggested that neurogenesis,response to axon injury,and oxidative stress were important biological processes.Protein analysis revealed an imperfect repair at this time point after injury and identified several distinguishable proteins.In conclusion,we suggest that peripheral neuropathies,whether of a genetic or traumatic cause,share some common pathological pathways.This study may provide directions for better characterization of these models and/or identifying new specific therapeutic targets.

Crushing Mechanism of Spherical Tungsten Alloy Fragments Penetrate Thick Steel Plate Target

Against protection requirements for high-speed fragments on the ground weapons,we carried out the research work of crushing mechanism at different impact speeds ofφ8.7 mm spherical tungsten alloy,the penetration to 603 armor steel was completed by 20 mm ballistic gun,and the ANSYS/LS-DYNA software was used to complete the numerical calculation of the penetration.We find that there are different crushing mechanisms of spherical tungsten alloy with different speeds and low speed,the crushing mechanism of fragment is mainly controlled by overall plastic deformation,shearing stripping,and squeezing at a high pressure and a high speed.The crushing mechanism will have a spallation phenomenon in addition to the crushing mechanism under high pressure.

Use of a tissue clearing technique combined with retrograde trans-synaptic viral tracing to evaluate changes in mouse retinorecipient brain regions following optic nerve crush

Successful establishment of reconnection between retinal ganglion cells and retinorecipient regions in the brain is critical to optic nerve regeneration.However,morphological assessments of retinorecipient regions are limited by the opacity of brain tissue.In this study,we used an innovative tissue cleaning technique combined with retrograde trans-synaptic viral tracing to observe changes in retinorecipient regions connected to retinal ganglion cells in mice after optic nerve injury.Specifically,we performed light-sheet imaging of whole brain tissue after a clearing process.We found that pseudorabies virus 724(PRV724)mostly infected retinal ganglion cells,and that we could use it to retrogradely trace the retinorecipient regions in whole tissue-cleared brains.Unexpectedly,PRV724-traced neurons were more widely distributed compared with data from previous studies.We found that optic nerve injury could selectively modify projections from retinal ganglion cells in the hypothalamic paraventricular nucleus,intergeniculate leaflet,ventral lateral geniculate nucleus,central amygdala,basolateral amygdala,Edinger-Westphal nucleus,and oculomotor nucleus,but not the superior vestibular nucleus,red nucleus,locus coeruleus,gigantocellular reticular nucleus,or facial nerve nucleus.Our findings demonstrate that the tissue clearing technique,combined with retrograde trans-synaptic viral tracing,can be used to objectively and comprehensively evaluate changes in mouse retinorecipient regions that receive projections from retinal ganglion cells after optic nerve injury.Thus,our approach may be useful for future estimations of optic nerve injury and regeneration.

Valproate reduces retinal ganglion cell apoptosis in rats after optic nerve crush

The retinal ganglion cells of the optic nerve have a limited capacity for self-repair after injury.Valproate is a histone deacetylase inhibitor and multitarget drug,which has been demonstrated to protect retinal neurons.In this study,we established rat models of optic nerve-crush injury and injected valproate into the vitreous cavity immediately after modeling.We evaluated changes in the ultrastructure morphology of the endoplasmic reticulum of retinal ganglion cells over time via transmission electron microscope.Immunohistochemistry and western blot assay revealed that valproate upregulated the expression of the endoplasmic reticulum stress marker glucose-regulated protein 78 and downregulated the expression of transcription factor C/EBP homologous protein,phosphorylated eukaryotic translation initiation factor 2α,and caspase-12 in the endoplasmic reticulum of retinal ganglion cells.These findings suggest that valproate reduces apoptosis of retinal ganglion cells in the rat after optic nerve-crush injury by attenuating phosphorylated eukaryotic translation initiation factor 2α-C/EBP homologous protein signaling and caspase-12 activation during endoplasmic reticulum stress.These findings represent a newly discovered mechanism that regulates how valproate protects neurons.

大豆玉米带状种植模式下玉米摘穗机设计与试验

针对丘陵山区大豆玉米带状种植模式的玉米果穗收获有机难用、无机可用的现状,设计一款自走式小型玉米摘穗机。该机采用纵卧式摘穗辊实现果穗摘取,并通过输送装置收集装袋;采用“Y”型布局的L型小甩刀实现茎秆粉碎。对摘穗过程进行动力学分析、对粉碎过程进行静力学分析,确定其核心装置设计参数并进行样机试制。以茎秆粉碎长度合格率、果穗损失率、籽粒破碎率为试验指标进行田间试验,来验证该机设计的合理性。试验表明:在生产率为0.8 hm^(2)/d、果穗籽粒含水率为26.38%、茎秆含水量为71.25%的条件下进行试验,茎秆粉碎长度合格率为92.4%、果穗损失率为2.06%、籽粒破碎率为0.61%。该机设计各项指标符合国家相关标准,能够满足丘陵山地地区玉米机械化收获需求。

不同条件下粉碎度及大曲品质研究

制曲原料粉碎后的物料包含大皮、颗粒、细粉三个部分,本实验从钢辊物理特征、使用周期、原料润粮时间等方面探讨其对原料粉碎度影响。实验结果表明,钢辊拉丝角度与深度对物料大皮、颗粒影响较大。随着钢辊使用周期延长,呈现物料大皮偏大、颗粒减少趋势。原料润粮时间以浸润6~9 h为宜。结合季节特性设计粉碎度与水分梯度实验,得出理化指标均衡、感官品质优异的大曲。本实验结果可为中高温制曲生产提供参考。

液压支架立柱防冲吸能构件优化仿真及压溃实验研究

液压支架作为煤炭开采主要支护设备,经常受到冲击地压影响,防冲吸能构件起到保护液压支架作用,为获得更大的初始支反力峰值与吸能量、更小的支反力分散度,对吸能构件参数细化并通过ABAQUS有限元软件进行吸能构件的建模与压溃冲击仿真,获取吸能构件的吸能性能及屈曲变形形态,验证最优尺寸的吸能性能;对比吸能构件平均支反力的预测数据与有限元仿真数据,误差在15%以内,最优尺寸构件的平均支反力模型预测误差为−3.40%,验证吸能构件预测模型所预测数据较为准确;搭建吸能构件压溃实验台,选择5种加载速度,以准静态压溃方式对定制加工的吸能构件进行轴向加载压溃实验,实验结果表明:不同加载速度轴向压溃实验,支反力波动基本一致,最大初始支反力峰值为2253.52 kN,最大支反力标准差为206.23 kN,最小初始支反力峰值为2096.26 kN,最小支反力标准差为189.83 kN,初始支反力峰值的平均值为2149.32 kN,支反力标准差平均值为196.77 kN;不同压溃速度下的轴向压溃实验数据与吸能构件有限元仿真数据对比,初始支反力峰值、支反力标准差的相对误差分别为5.6%、11.07%;对最优尺寸吸能构件通过预测模型法、有限元仿真法、压溃实验法三种方法进行吸能性能分析,预测模型法的平均支反力为1879.7 kN,有限元仿真法的平均支反力为1945.9 kN,压溃实验法平均支反力为1919.8 kN,预测模型误差3.41%,压溃实验误差−1.3%,通过3种方法的数据验证结果,证明了吸能构件分析方法的可靠性和可行性。

不同发酵时期对黑蒜调味粉品质的影响

黑蒜富含微量元素与营养物质,作为一种食品或保健品在市面上流行。黑蒜的品质也引起了人们的广泛关注。普通黑蒜是用新鲜完整的带皮生蒜在高温高湿的发酵箱中自然发酵90~120 d后制成的。然而生蒜是如何在发酵过程中逐渐变黑、黑蒜与生蒜极大的口感差别以及两者营养价值的变化基于什么成为人们疑惑的问题。该研究选取品相完好的紫皮独头蒜,在专业的黑蒜发酵锅中发酵10 d,获得发酵成功的黑蒜,并在发酵过程中对不同发酵时期的黑蒜进行质构测定,经过干燥破碎,制成调味蒜粉,并对其中的还原糖含量、总酸含量、总酚含量、水分含量、粗脂肪含量、蛋白质含量进行测定,由此探寻蒜在发酵过程中产生的变化,从而对不同发酵时期黑蒜调味粉的品质进行综合评价。该研究可拓展关于调味品发酵方面的知识,为提高新型功能性调味粉的营养价值提供更多的数据资源。

1ZL-7.2型联合整地机的研制

整地作业可将犁耕后的土壤进行碎土、平整,为播种环节创造良好的作业条件,联合整地机在新疆已被广泛应用。近年来大中马力拖拉机保有量逐年增加,为提高整地作业幅宽和效率,研制了一款与大马力拖拉机相配套的联合作业机,开发了新型合金材料的耐磨耙片。作业幅宽为7.2 m,机架可以进行折叠便于运输。田间试验表明,该型机具作业效果良好,故障率低,操作简单、方便。

泥石浆型复杂破碎岩体非线性渗流数学模型与实验研究

断层、陷落柱是影响承压水上煤层开采的主要隐患之一,由于其具有碎石块和泥质充填物(泥石浆)构成的复杂结构,其渗透性的确定通常以定性分析为主,缺少量化模型。为了研究泥石浆型复杂破碎岩体渗透性的量化计算方法,开展了渗流实验研究破碎岩体非线性渗流规律,并基于多孔介质分形理论、非线性渗流理论,建立了考虑黏土成分及泥化充填作用的破碎岩体非线性渗流数学模型,最后与实验结果对比验证数学模型的准确性。结果表明:①陷落柱破碎带样品的粒度分布具有一定的分形规律,含有黏土颗粒的破碎带岩体遇水泥化后,分形维数增大,黏土充填封堵了大颗粒岩石碎块内部的大孔隙,降低了破碎岩体的渗透性;②随着破碎带岩体渗透率的降低,非线性开始发生时的临界压力梯度也增大,表明非线性临界压力梯度可以用来量化破碎岩体的阻隔水能力;③非线性开始发生时的临界压力梯度的实验结果与数学模型计算结果吻合,验证了模型的准确性。建立的破碎岩体非线性渗流数学模型首次尝试考虑了黏土成分及泥化充填作用对渗透性的影响,为泥石浆型复杂破碎岩体渗透性的定量计算及水体下、承压水上等特殊开采条件下地质构造的阻隔水性能研究提供了一种新的研究思路。

松软破碎煤体取制样与剪切试验系统研制及应用

研究松软破碎煤体力学性质对巷道支护和煤与瓦斯突出预测等工作具有重要意义,但当前缺乏有效的松软破碎煤体取样、制样及力学特性分析装置。为此,研发了一套松软破碎煤体取制样与剪切试验系统,主要由取样装置、制样装置和力学特性参数测试系统组成,各部分具有以下主要功能与特点:①取样装置中的单动三管取芯器包含脑袋总成、外管总成及内管总成3部分,内外管间设置稳定环,保证内外管同心,内管总成腔体内部设置衬管用于储存煤心,取芯钻进时内管不随外管旋转;当钻取的煤心充满衬管后,退出取芯器,拆卸取出衬管,将煤心连同衬管一并取出并进行封装。取样装置灵活、轻便、易拆装携带。②制样装置包含脱模仪、切割机、冰箱、热风枪4部分,脱膜仪用于脱去煤心外层衬管,切割机、冰箱和热风枪用于对煤心进行切割、冷冻和热缩;制作标准煤心试件分为打孔润湿、冷冻切割和热缩脱模3个步骤,采用端头局部冷冻切割、脱模与热缩均匀同步等技术,实现多种标准尺寸试件制备,制样方法完善、成功率高。③力学特性参数测试系统包含主体结构、伺服油源控制装置和软件系统3部分,能实现限制性及非限制性直剪试验功能,主要用于开展松软破碎煤体标准试件不同法向应力下直剪试验、不同围压下三轴压缩试验。整体设计结构简单、操作方便。研究利用单动三管取芯器获取松软破碎煤体,利用脱模仪等制样装置将其制备成标准试件,进而在力学特性参数测试系统上分别开展松软破碎煤体标准试件在0.04、0.05、0.06、0.07、0.08、0.09 MPa法向应力下的直剪试验和0.2、0.3、0.4 MPa围压下的三轴压缩试验,并求得两种试验条件下松软破碎煤体的黏聚力和内摩擦角等抗剪强度参数,其中直剪试验求得的黏聚力和内摩擦角为0.125 kPa和37.2°,三轴压缩试验求得的黏聚力和内摩擦角为0.121 kPa和36.4°。结果表明,该套系统具有较好的实用性和可靠性,为研究松软破碎煤体力学特性提供了较好的试验平台和方法。

双定刀滑切防缠式香蕉秸秆粉碎还田机设计与试验

针对我国香蕉秸秆粉碎还田作业过程中香蕉秸秆粉碎质量差,秸秆缠绕堵塞等问题,设计了一种双定刀滑切防缠式香蕉秸秆粉碎还田机。基于滑切定理,解析了粉碎刀随轴转动过程中的动态滑切角和粉碎定刀滑切角的相对作用原理,以等速螺线设计L形粉碎定刀刀刃曲线,确定了粉碎刀结构参数;对香蕉秸秆缠绕粉碎刀辊进行受力分析,设计防缠绕板并确定装配数量与结构参数;以装置前进速度、粉碎刀辊转速、防缠绕板高度为试验因素,以香蕉秸秆粉碎合格率、抛撒不均匀度和香蕉秸秆缠绕数量为评价指标进行三因素三水平正交试验,建立因素与指标的响应面数学模型。试验结果表明,最优参数组合为作业机前进速度1.5 m/s、防缠绕板高度41.6 mm、粉碎刀辊转速1800 r/min,此时香蕉秸秆粉碎合格率为93.8%,香蕉秸秆缠绕数量为26,香蕉秸秆抛撒不均匀度为12.1%。以最优组合进行田间试验验证,试验结果表明双定刀滑切防缠式香蕉秸秆粉碎还田机整机防缠性能优越,满足设计要求。

激振搅拌对水泥稳定碎石与煤矸石抗压强度的影响

为研究激振搅拌工艺对水泥稳定煤矸石混合料性能的影响规律,以水泥稳定碎石为基准,对比分析普通搅拌与激振搅拌对不同水泥剂量的水泥稳定基层材料无侧限抗压强度的影响。结果表明:在干拌状态下增加激振工艺对基层混合料抗压强度的提升效果显著,在激振气压为0.4 MPa、激振干拌30 s后普通湿拌30 s条件下,混合料的7 d无侧限抗压强度达到最佳;激振搅拌对水泥稳定碎石、水泥稳定煤矸石混合料强度的平均提升幅度约为20%,对煤矸石混合料的强度提升更加显著,水泥剂量越少,提升幅度越大。SEM结果表明激振搅拌后混合料中的水化产物分布更加均匀,结构更加致密;经线性拟合计算,当水泥剂量为2.0%~7.0%(质量分数,下同)时,激振搅拌对于碎石混合料可节约8.9%~26.3%的水泥,对于煤矸石混合料可节约12.9%~30.8%水泥,且节约率与水泥剂量成反比。

冻融循环下秸秆纤维混凝土损伤特性及动态力学性能研究

为研究冻融循环对不同纤维掺量的秸秆纤维混凝土动态力学性能的影响,采用非金属超声波检测仪测量不同冻融循环次数下秸秆纤维混凝土试件纵波波速,利用直径74 mm变截面分离式霍普金森压杆试验装置对试件开展动态单轴压缩试验,分析试件纵波波速、峰值应力、劣化度、韧性及破碎耗能密度与冻融循环次数及秸秆纤维掺量间的关系。结果表明:纤维的掺入能够提高混凝土材料的纵波波速及整体性,随着冻融循环次数的增加,秸秆纤维混凝土纵波波速随之降低,冻融循环会对试件造成损伤;秸秆纤维的掺入会增强混凝土材料的力学性能,掺量为0.2%时效果最佳,冻融循环作用试件峰值应力不断降低,劣化度不断增加,相较于冻融循环0次素混凝土试件,冻融循环30、60、90、120次试件峰值应力分别降低6.96%、19.4%、34.2%、53.3%,冻融循环后期应力降幅显著增加,纤维的掺入在一定程度上减缓了冻融作用下试件劣化程度;纤维掺量为0.2%时试件的韧性与破碎耗能密度提升最大,冻融循环会对试件造成劣化,降低其韧性及吸能效果。秸秆纤维的掺入使混凝土材料力学性能大幅增加,秸秆纤维的绿色可再生性对秸秆纤维混凝土的推广具有重大意义。