The current study focuses on the electrolyte penetration of the graphite cathode in a NaF−KF−LiF−AlF_(3) aluminum-electrolysis system with a cryolite ratio of 1.3.It involves a comprehensive investigation of the elect...The current study focuses on the electrolyte penetration of the graphite cathode in a NaF−KF−LiF−AlF_(3) aluminum-electrolysis system with a cryolite ratio of 1.3.It involves a comprehensive investigation of the electrolyte in the cathode before and after electrolysis by X-ray diffraction and analysis of the results by semi-quantitative calculation in MAUD.The results show that KF can promote electrolyte penetration,with higher KF contents resulting in greater penetration.During electrolyte penetration,K_(2)NaAlF_(6) and solid solutions containing KF play important roles in KF-containing systems.LiF effectively prevents the electrolyte penetration,while the Na_(3)Li_(3)Al_(2)F_(12) phase plays an essential role in systems with high LiF contents.展开更多
The cathodic behavior at tungsten electrode in Na3AlF6-Al2O3-LiF-based melt with various cryolite ratios was investigated by means of potentiodynamic cathodic polarization, potentiostatic electrolysis, chronopotentiom...The cathodic behavior at tungsten electrode in Na3AlF6-Al2O3-LiF-based melt with various cryolite ratios was investigated by means of potentiodynamic cathodic polarization, potentiostatic electrolysis, chronopotentiometry, and open-circuit chronopotentiometry. The results show that the formation process of Al-W intermetallic compound is controlled by both diffusion and charge transfer when the cryolite ratio is below 2.5, and is completely controlled by diffusion when cryolite ratio is above2.5. The deposition process of metal aluminum is completely charge-transfer controlled. Sodium vapor releases along with the deposition of metal aluminum as crylite ratio increases, which leads to a great influence on current efficiency. When the cryolite ratio is lower than 2.0, the critical cathodic current density of deposited aluminum at tungsten electrode is about 150 mA·cm^（-2）,but the current density is above 200 mA·cm^（-2） under other experimental conditions. A higher cryolite ratio can cause a higher cathodic overvoltage. The relative content of Al layer is higher with the decrease of cryolite ratio, and Al layer easily strips into the molten salt when the cryolite ratio is higher than 2.5.展开更多
基金financial supports from the National Natural Science Foundation of China (Nos.51774080,22078056)the National Key R&D Program of China (No.2018YFC1901905)。
文摘The current study focuses on the electrolyte penetration of the graphite cathode in a NaF−KF−LiF−AlF_(3) aluminum-electrolysis system with a cryolite ratio of 1.3.It involves a comprehensive investigation of the electrolyte in the cathode before and after electrolysis by X-ray diffraction and analysis of the results by semi-quantitative calculation in MAUD.The results show that KF can promote electrolyte penetration,with higher KF contents resulting in greater penetration.During electrolyte penetration,K_(2)NaAlF_(6) and solid solutions containing KF play important roles in KF-containing systems.LiF effectively prevents the electrolyte penetration,while the Na_(3)Li_(3)Al_(2)F_(12) phase plays an essential role in systems with high LiF contents.
基金financially supported by the National Basic Research Program of China(No.2013CB632606-1)the National Natural Science Foundation of China(No.51204044)
文摘The cathodic behavior at tungsten electrode in Na3AlF6-Al2O3-LiF-based melt with various cryolite ratios was investigated by means of potentiodynamic cathodic polarization, potentiostatic electrolysis, chronopotentiometry, and open-circuit chronopotentiometry. The results show that the formation process of Al-W intermetallic compound is controlled by both diffusion and charge transfer when the cryolite ratio is below 2.5, and is completely controlled by diffusion when cryolite ratio is above2.5. The deposition process of metal aluminum is completely charge-transfer controlled. Sodium vapor releases along with the deposition of metal aluminum as crylite ratio increases, which leads to a great influence on current efficiency. When the cryolite ratio is lower than 2.0, the critical cathodic current density of deposited aluminum at tungsten electrode is about 150 mA·cm^（-2）,but the current density is above 200 mA·cm^（-2） under other experimental conditions. A higher cryolite ratio can cause a higher cathodic overvoltage. The relative content of Al layer is higher with the decrease of cryolite ratio, and Al layer easily strips into the molten salt when the cryolite ratio is higher than 2.5.
