Imaging the crystal orientation of 2D transition metal dichalcogenides using polarization-resolved second-harmonic generation

We use laser-scanning nonlinear imaging microscopy in atomically thin transition metal dichalcogenides(TMDs)to reveal information on the crystalline orientation distribution,within the 2D lattice.In particular,we perform polarization-resolved second-harmonic generation(PSHG)imaging in a stationary,raster-scanned chemical vapor deposition(CVD)-grown WS2 flake,in order to obtain with high precision a spatially resolved map of the orientation of its main crystallographic axis(armchair orientation).By fitting the experimental PSHG images of sub-micron resolution into a generalized nonlinear model,we are able to determine the armchair orientation for every pixel of the image of the 2D material,with further improved resolution.This pixel-wise mapping of the armchair orientation of 2D WS2 allows us to distinguish between different domains,reveal fine structure,and estimate the crystal orientation variability,which can be used as a unique crystal quality marker over large areas.The necessity and superiority of a polarization-resolved analysis over intensity-only measurements is experimentally demonstrated,while the advantages of PSHG over other techniques are analysed and discussed.

Manipulating Crystal Growth and Secondary Phase PbI_(2)to Enable Efficient and Stable Perovskite Solar Cells with Natural Additives

In perovskite solar cells(PSCs),the inherent defects of perovskite film and the random distribution of excess lead iodide(PbI_(2))prevent the improvement of efficiency and stability.Herein,natural cellulose is used as the raw material to design a series of cellulose derivatives for perovskite crystallization engineering.The cationic cellulose derivative C-Im-CN with cyano-imidazolium(Im-CN)cation and chloride anion prominently promotes the crystallization process,grain growth,and directional orientation of perovskite.Meanwhile,excess PbI_(2)is transferred to the surface of perovskite grains or formed plate-like crystallites in local domains.These effects result in suppressing defect formation,decreasing grain boundaries,enhancing carrier extraction,inhibiting non-radiative recombination,and dramatically prolonging carrier lifetimes.Thus,the PSCs exhibit a high power conversion efficiency of 24.71%.Moreover,C-Im-CN has multiple interaction sites and polymer skeleton,so the unencapsulated PSCs maintain above 91.3%of their initial efficiencies after 3000 h of continuous operation in a conventional air atmosphere and have good stability under high humidity conditions.The utilization of biopolymers with excellent structure-designability to manage the perovskite opens a state-of-the-art avenue for manufacturing and improving PSCs.

Effect of crystal orientation on corrosion behavior of directionally solidified Mg-4 wt% Zn alloy

Microstructure and crystallographic orientation of directionally solidified Mg-4 wt% Zn alloy were characterized by X-ray computed tomography （XCT） and electron backscatter diffraction （EBSD） in this study. Results reveal that Mg-4 wt% Zn alloy with dendritic microstructure exhibits typical { 0002} basal texture along growth direction. Based on this, the effect of grain orientation on corrosion behavior of directionally solidified Mg-4 wt% Zn alloy in 0.9 wt% NaCl solution was investigated. Result shows that {0002} oriented planes have better corrosion resistance than {1120} and {1010 } ones, which is attributed to a synergistic effect of surface energy, atomic packing density and the stability of oxidation film,2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology,

Variation of crystal orientation during epitaxial growth of dendrites by laser deposition

A nickel-based superalloy was deposited onto a single crystal substrate based on epitaxial laser metal forming （E-LMF）. The microstructure development in two depositions has been researched. For the first time, the crystal orientation of dendrites varying beyond 20° was found when the dendrites deflected in deposition. In addition, a new grain boundary was found between different orientation dendrites in a grain, and the detected grain boundary angle was 23°. The result shows that flowing field in laser pool is responsible for this phenomenon.

Surface morphology and crystal orientation of electrodeposited tungsten coatings with different pulse parameters

This study was conducted to investigate the influence of pulse parameters on the surface morphology and crystal orientation of the tungsten coatings electrodeposited on pure copper substrates. The deposited coatings were analyzed by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and energy-dispersive spectrometer （EDS）. SEM analysis indicates that pulse parameters have significant influences on the surface morphology of the deposited coatings. Meanwhile, the change in grain size of the tungsten coatings demonstrates that the change in frequency and duty cycle could cause the variation of nucleation rate and grain growth of deposits. Moreover, no obvious diffusion layer at the coating/substrate interface is found by line analysis of EDS. XRD results reveal that tungsten coatings are of bcc structure and the preferred orientation of the deposits varies with duty cycle and period.

Impact of crystal orientation and surface scattering on DG-MOSFETs in quasi-ballistic region

The characteristics of nano scale n-type double gate MOSFETs with（100） and（110） surfaces are studied using 3 D full band ensemble Monte Carlo simulator. The anisotropic surface scattering mechanism is investigated. The（100） case is sensitive to the gate voltage more than the（110） case. The impact of crystal orientation and surface scattering on transport features mainly reflects in the carrier velocity distribution. The electron transport features with（100） direction are greater than that with（110） direction, but are more likely to be affected by the surface scattering.

Identification of crystal orientation for turbine blades with anisotropy materials

A novel approach to identify the crystal orientation of turbine blades with anisotropy materials is proposed. Based on enhanced mode basis, with the main advantages of its efficiency,accuracy and general applicability, the blade vibration mode of each order is linearly constructed by several specified mode shapes, which are obtained from the considered turbine blade with specified crystal orientations correspondingly. Then, a surrogate model based on Kriging method is introduced for constructing the condensed perturbed matrix of stiffness in order to improve the efficiency even further. The constructed surrogate model allows to perform the modal analysis of turbine blades with arbitrary crystal orientations in higher efficiency, due to the fact that the elements of condensed perturbed matrix of stiffness are considered in construction of the surrogate model rather than concerning the perturbation of all the elements of the initial stiffness matrix for the blade. Genetic algorithm is finally employed to optimize the defined fitness functions in order to identify the crystal orientation angles of turbine blades. Several corresponding examples demonstrated the accuracy, efficiency and general applicability of the proposed method.

EFFECT OF ORIENTATION ON STRESS RESPONSE,FRICTION STRESS AND BACK STRESS DURING CYCLIC DEFORMATION IN Al SINGLE CRYSTALS

The symmetrical push-pull fatigue tests at strain amplitude of 2×10~3 with different slip orientation of Al single crystals,were carried out at room temperature in air.The peak stresses of various cycles were measured and the stress-strain hysteresis loops for selected cy- cles were recorded.The energy losses.friction stresses,back stresses and shape

EFFECT OF SLIP ORIENTATION ON STRESS RESPONSE,INTERNAL FRICTION AND ULTRASONIC ATTENUATION DURING CYCLIC DEFORMATION IN Al SINGLE CRYSTALS

The variation of cyclic stress,internal friction and ultrasonic attenuation during cyclic deformation and relations among them have been investigated with different slip orientation Al single crystals.The results indicate that the value of cyclic stress σ,internal friction Q^(-1)and ultrasonic attenuation △α depend obviously on the slip orientation.There are large differences in above three parameters for different slip orientation Al crystals.In early stage of fatigue life,σ and △α increase and Q^(-1)decreases with cycles N,and △α reached maxi- mum before σ,while Q^(-1)and σ get the valley and the peak,respectively,at same cycles.

Microscopic insights into hydrophobicity of cerium oxide:Effects of crystal orientation and lattice constant

Cerium oxide possesses intrinsic hydrophobic properties ascribed to the unique electronic structure.However,the relationship between the crystal structure and hydrophobicity of cerium oxide has not been systematically studied.Herein,it is experimentally and theoretically demonstrated that the water contact angle(105.9°)of the(111)surface is higher than that(91.7°)of the(220)surface,associated with the lower surface free energy(28.44 mN/m)of(111)surface than that(38.48 mN/m)of(220)surface.Furthermore,cerium oxide films with(111)-terminated surface are annealed at 300℃ and 600℃ for1 h,respectively.The lattice constant increases(5.4594Å<5.4613Å<5.4670Å)with decreasing the annealing temperature(600℃>300℃>the as-deposited),leading to the increased water contact angle(96.7°<96.8°<99.0°).The First-principles calculation provides microscopic insights into the wetting mechanism,originating from the weakened adsorption capacity of the(111)surface for water molecules with the increasing lattice constant.

ORIENTATION DISTRIBUTION FUNCTIONS FOR MICROSTRUCTURES OF HETEROGENEOUS MATERIALS (Ⅱ)──CRYSTAL DISTRIBUTION FUNCTIONS AND IRREDUCIBLE TENSORS RESTRICTED BY VARIOUS MATERIAL SYMMETRIES

The explicit representations for tensorial Fourier expansion of 3_D crystal orientation distribution functions (CODFs) are established. In comparison with that the coefficients in the mth term of the Fourier expansion of a 3_D ODF make up just a single irreducible mth_order tensor, the coefficients in the mth term of the Fourier expansion of a 3_D CODF constitute generally so many as 2m+1 irreducible mth_order tensors. Therefore, the restricted forms of tensorial Fourier expansions of 3_D CODFs imposed by various micro_ and macro_scopic symmetries are further established, and it is shown that in most cases of symmetry the restricted forms of tensorial Fourier expansions of 3_D CODFs contain remarkably reduced numbers of mth_order irreducible tensors than the number 2m+1 . These results are based on the restricted forms of irreducible tensors imposed by various point_group symmetries, which are also thoroughly investigated in the present part in both 2_ and 3_D spaces.

Aligning Crystal Orientation of Poly-Crystalline Bi-Te With a High Magnetic Field

We investigated the effect of aligning crystal orientation in the microstructures containing sub micro-sized grains on the thermoelectric properties for polycrystalline Bi-Te materials.Bi-Te powder,prepared through the conventional pulverization process,was sufficiently dispersed in an appropriate solvent,and then was formed into c-axis aligned green bodies under a designated high magnetic field.The green bodies were sintered with spark-plasma-sintering machine.The degree of crystal alignment of sintered bodies was examined with the electron-back-scatter-diffraction SEM and the X-ray diffraction patterns.It was observed that for both p and n type thermoelectric Bi-Te materials,aligning crystal orientation properly made electrical resistivity decreased with keeping Seebeck coefficient and thermal conductivity remained unchanged.As a typical result,the aligned Bi-Te material with the magnetic field of 10 tesla showed 30%enhancement of the thermoelectric performance.

The Relationship Between Nacreous Layer Color and CaCO_3 Crystal Orientation

The pearl or nacreous layer of mollusk shell is composed of CaCO 3 aragonite crystals. The factors affecting their color are very complex, such as metal elements, chromoprotein, and nucleation materials. we analyzed the crystal orientation of nacreous layers with different color prepared from fresh water clams Hyriopsis cumingii Lea by X ray diffraction . The results show that the crystal CaCO 3 orientation on specific plane is responsible for the color of pearl and nacreous pearl color.

Investigation on the Orientation Transition of Oriented Magnetostrictive TbDyFe Crystals

〈110〉 and 〈112〉 TbDyFe magnetostrictive oriented crystals were prepared by the zone-melting unidirectional solidification method at 240 mmfh and 720 mm/h respectively. 〈112〉 oriented crystals were also obtained with 〈110〉 oriented seeds with the same technique as for growing the 〈112〉 oriented crystals. It is confirmed that this technique is stable for growing the oriented crystals in the TbDyFe alloys. Meanwhile, the variation of orientation, the solidification morphology and the magnetostriction were studied during the transition from 〈110〉 oriented seeds to the 〈112〉 oriented crystal growth. As the growth speeds up, the preferred orientation changed from 〈110〉 to 〈112〉, and its morphology develops from of initial cellular to dendritic gradually. When an axial compressive pre-stress of 10 MPa is applied, the magnetostriction at the bottom, the middle and the top are 972× 10^6, 918 × 10^-6 and 900× 10^-6 at 100 mT respectively. The middle sections with mixed orientations have the same high magnetostriction performance as those with a single preferred orientation, which may be due to its celluar-dendritic morphology.

MATRIX INVESTIGATION ON ISAICHEV ORIENTATION RELATIONSHIP

By means of TEM technique the orientation relationships of cementite, precipitated from islands of granular bainite during tempering, with ferrite have been observed. By calculating the eigenvalues and eigenvectors of transformation matrix, Isaichev relationship has been analyzed. The results indicate that Isaichev relationship is indeed the sum of Kurdjumov-Sachs relationship and Pitsch relationship, so the viewpoint that the cementite with Isaichev relationship precipitates from austenite, instead of ferrite, was confirmed. Moreover, the matrix calculation shows that three reported orientation relationships among austenite, ferrite and cementite in pearlitic transformation cannot be simultaneously valid. (Edited author abstract) 4 Refs.

Orientation-dependent morphological stability of grain boundary groove

Crystal orientation influences the morphological stability of solid–liquid interface during directional solidification of alloy, resulting in the variation of solidified microstructure. In this paper, the morphological evolution near grain boundary grooves（GBGs） with different crystal orientations in a dilute succinonitrile alloy under low temperature gradient and interface velocity is observed in situ. Under experimental conditions, the macroscopic solid–liquid interface is planar and keeps stable, while in GBGs there emerge protrusion and undulation. It is found that the morphological stability of GBG is dependent on crystal orientation. Specifically, for succinonitrile with a body-centered cubic crystal structure, GBGs around the 100 crystal orientation keep stable, while those apart from the 100 crystal orientation become unstable under the same conditions. So it is concluded that 100 crystal orientation favors the morphological stability of GBG.

Mechanical Property and Crystal Structure of Poly(p-phenylene terephthalamide)(PPTA) Fibers during Heat Treatment under Tension

The relationship between property and structure of poly( p-phenylene terephthalamide)( PPTA) was investigated for the purpose of obtaining products with better performance. PPTA fiber subjected to heat treatment under different conditions was intensively studied. Simultaneous wide-angle X-ray diffraction( WAXD) technique was introduced to study the changes of crystal structure. It was found that the tensile modulus was strongly sensitive to the levels of temperature and tension. The structure parameters including crystal size and crystal orientation after heat treatment evolve similarly to the tensile modulus,indicating a direct structure-property relationship. The lattic c-dimension increases after heat treatment and is greatly affected by the tension. An optimal temperature can be found around 400 ℃,where big change can happen in the crystal structure due to α-relaxation in the crystal region as supported in dynamic mechanical analysis( DMA).

Study on Characteristics of Crystal Growth of NdFeB Cast Alloys

The characteristic of crystal growth of NdFeB cast alloys was studied. It is found that the crystal growth orientation of conventional ingots is along <410> or <411>. As the cooling rate increases, the crystallization orientation changes from a axis to c axis, along which the grain is easy to be magnetized. Meanwhile, by analyzing the change of crystallization orientation, the influence on the property of magnets was discussed.

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High‑Performance Zinc Anode:Principles,Strategies,and Challenges

The last several years have witnessed the prosperous development of zinc-ion batteries(ZIBs),which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety.However,the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth,hydrogen evolution,and corrosion passivation on anode side.A functionally and structurally well-designed anode current collectors(CCs)is believed as a viable solution for those problems,with a lack of summarization according to its working mechanisms.Herein,this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs,which can be divided into zincophilic modification,structural design,and steering the preferred crystal facet orientation.The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.