Compatibilization of PBT/PP Blends by Adding Side-chain Liquid Crystalline Ionomer with Quaternary Pyridinium Groups

A side-chain liquid crystalline ionomer（SLCI） was synthesized by grafting copolymerization of 4-（4-ethoxybenzoyloxy）-4＇-allyloxybiphenyl and N-allyl-pyridium bromide on polymethylhydrosiloxane. The SLCI was blended with polypropylene（PP） and polybutylene terephthalate（PBT） by melt mixing. The thermal behavior, liquid crystalline properties, morphological structure, and mechanical properties of the blends were investigated by differential scanning calorimetry（DSC）, polarizing optical microscopy（POM）, scanning electron microscopy（SEM）, and tensile measurement. When a proper amount of SLCI was added, fine configurations were formed in the PBT/PP/SLCI blend system, and the mechanical properties were improved due to improved adhesion at the interface. When excess SLCI was added, an inhomogeneous structure resulted, which caused the mechanical properties to deteriorate.

Modification of Interfacial Interaction of PBT/PP Blends by Adding Main-chain Liquid Crystalline Ionomer with Sulfonic Group

A main-chain liquid crystalline ionomer（MLCI） containing sulfonic group was synthesized by an interfacial condensation reaction.The MLCI was blended with polybutylene terephthalate（PBT） and polypropylene（PP）.MLCI interacted with both the dispersed（PP） phase and the matrix（PBT） phase to modify the interfacial interaction of PBT and PP.Differential scanning calorimetry（DSC）,scanning electron microscopy（SEM） and FTIR imaging system analysis demonstrated the significance of interfacial interaction in the polymer blends.MLCI brought about good adhesion at the interfacial,which reduced the disperse phase size and enabled a fine PP phase at matrix.The mechanical properties of the ternary blends were improved when a proper amount of MLCI was added.This was attributed to enhanced adhesion at the interface,which invoked better mechanical properties in the blends.

STUDY ON THE BLENDS OF NYLON 66 AND LIQUID CRYSTALLINE POLYESTERS

Blends of polyamide (Nylon 66) with two different kinds of liquid crystalline polyesters were studied in all the composition range. Homogeneous samples were obtained by coprccipitation from 2 wt%. solution of blends. The thermal properties, crystallinity and morphology of these blends were studied by using DSC, polarizing microscopy, and scanning electron microscopy. The phase transition and morphology of the blends are markedly-influenced by the composition of liquid crystalline polyesters. The mechanical behaviour of PHB/HNA-Nylon 66 blend was improved. although polyamidc (Nylon 66)with the liquid crystalline polyesters were incompatible, but a rather strong interaction between the polymers did exist.

EFFECT OF DRAWING ON MORPHOLOGY,STRUCTURE AND MECHANICAL PROPERTIES OF BLENDS OF A LIQUID CRYSTALLINE POLYMER AND MODIFIED POLY(PHENYLENE OXIDE)

Polymer strands with various draw ratios of a thermotropic liquid crystalline polymer (LCP) and modified poly(phenylene oxide) were prepared by drawing the melts leaving a slit die in open air. The morphology, structure and mechanical properties of the resulting strands were studied as a function of LCP content and draw ratio. It was found that the thermal and mechanical properties of the matrix phase did not change dramatically with the amount of LCP and draw ratio, but the orientation of LCP phase could be increased with draw ratio. The mechanical properties of the strands could be improved by moderately drawing the melts. Wide angle X-ray diffraction suggested that the improvement in tensile strength of the strands was due to the resultant fibrillation of LCP phase and enhanced molecular orientation. Morphological observation indicated that excessive drawing of the strands could lead to the break down of the microfibrils of LCP and thus resulted in the decrease of mechanical strength.

The Rheological and Extrusion Behaviour of Blends Based on Phenolphthalein Poly(ether-ether-sulfone)and Thermotropic Liquid Crystalline Polymer

A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS Ⅱ) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone and plate geometry give a temperature independent correlation for both blend and PES C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.

MELT BLENDS OF POLY (BUTYLEN TEREPHTHALATE) AND A THERMOTROPIC LIQUID CRYSTALLINE POLYMER

With the help of differential scanning calorimetry, cone-plate and capillary rheometry andscanning electron microscopy, a research has been conducted on rheological behavior,crystallization and morphology of poly (butylene terephthalate) (PBT) blends containing athermotropic LCP. The blend has zero entrance pressure loss, although the LCP has rather largeone. The viscosity curve of the blend lies between those of the LCP and PBT. The crystallizationof PBT is not affected by the presence of the LCP together with no indication oftransesterification between the two ingredients. LCP spheres and ellipsoids with the size of 0. 5--1. 5 μm disperse in PBT matrix uniformly, which is related to the viscosity ratio of the two components.

Constructing long-cycling crystalline C_(3)N_(4)-based carbonaceous anodes for sodium-ion battery via N configuration control

Carbon nitrides with two-dimensional layered structures and high theoretical capacities are attractive as anode materials for sodium-ion batteries while their low crystallinity and insufficient structural stability strongly restrict their practical applications.Coupling carbon nitrides with conductive carbon may relieve these issues.However,little is known about the influence of nitrogen(N)configurations on the interactions between carbon and C_(3)N_(4),which is fundamentally critical for guiding the precise design of advanced C_(3)N_(4)-related electrodes.Herein,highly crystalline C_(3)N_(4)(poly(triazine imide),PTI)based all-carbon composites were developed by molten salt strategy.More importantly,the vital role of pyrrolic-N for enhancing charge transfer and boosting Na+storage of C_(3)N_(4)-based composites,which was confirmed by both theoretical and experimental evidence,was spot-highlighted for the first time.By elaborately controlling the salt composition,the composite with high pyrrolic-N and minimized graphitic-N content was obtained.Profiting from the formation of highly crystalline PTI and electrochemically favorable pyrrolic-N configurations,the composite delivered an unusual reverse growth and record-level cycling stability even after 5000 cycles along with high reversible capacity and outstanding full-cell capacity retention.This work broadens the energy storage applications of C_(3)N_(4) and provides new prospects for the design of advanced all-carbon electrodes.

Biodegradation of Crystalline Chitin:A Review of Recent Advancement,Challenges,and Future Study Directions

Chitin is the second most abundant renewable polysaccharide on Earth.The degradation of chitin into soluble and bioactive N-acetyl chitooligosaccharides(NCOSs)and N-acetyl-D-glucosamine(GlcNAc)has emerged as a pivotal step in the efficient and sustainable utilization of chitin resources.However,because of its dense structure,high crystallinity,and poor solubility,chitin typically needs pretreatment via chemical,physical,and other methods before enzymatic conversion to enhance the accessibility between substrates and enzyme molecules.Consequently,there has been considerable interest in exploring the direct biological degradation of crystalline chitin as a cost-effective and environment-friendly technology.This review endeavors to present several biological methods for the direct degradation of chitin.We primarily focused on the importance of chitinase containing chitin-binding domain(CBD).Additionally,various modification strategies for increasing the degradation efficiency of crystalline chitin were introduced.Subsequently,the review systematically elucidated critical components of multi-enzyme catalytic systems,highlighting their potential for chitin degradation.Furthermore,the application of microorganisms in the degradation of crystalline chitin was also discussed.The insights in this review contribute to the explorations and investigations of enzymatic and microbial approaches for the direct degradation of crystalline chitin,thereby fostering advancements in biomass conversion.

Synthesis of crystalline g-C_(3)N_(4) with rock/molten salts for efficient photocatalysis and piezocatalysis

Graphitic carbon nitride(g-C_(3)N_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics significantly restricts its practical applications.Currently,synthesizing highly crystalline g-C_(3)N_(4) with sufficient surface activities still remains challenging.Herein,different from using alkali molten salts which is commonly reported,we propose an approach for synthesis of highly crystalline g-C_(3)N_(4) with FeCl3/KCl rock/molten mixed salts.The rock salt can serve as the structure-directing template while molten salt provides the required liquid medium for re-condensation.Intriguingly,the synthesized photocatalyst showed further enhanced crystallinity and improved surface area along with high p/p*excitation compared with crystalline C_(3)N_(4) prepared from conventional molten-salt methods.These catalytically advantageous features lead to its superior photocatalytic and piezocatalytic activities with a high reactivity for overall water splitting that is not commonly reported for C_(3)N_(4).This work provides an effective strategy for structural optimization of organic semiconductor based materials and may inspire new ideas for the design of advanced photocatalysts.

Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5)metallic glass and crystalline W

In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed that with the irradiation dose increased,the tensile micro-strain increased,nano-hardness increased from 7.11 GPa to 7.90 GPa and 8.62 GPa,Young’s modulus increased,and H3/E2 increased which indicating that the plastic deformability decreased in crystalline W.Under the same irradiation conditions,the Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG still maintained the amorphous structure and became more disordered despite the longer range and stronger displacement damage of Ne ions in Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG than in crystalline W.Unlike the irradiation hardening and embrittlement behavior of crystalline W,Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG showed the gradual decrease in hardness from 6.02 GPa to 5.89 GPa and 5.50 GPa,the decrease in modulus and the increase in plastic deformability with the increasing dose.Possibly,the irradiation softening and toughening phenomenon of Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG could provide new ideas for the design of nuclear materials.

Shock-induced energy localization and reaction growth considering chemical-inclusions effects for crystalline explosives

Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics method.Results indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and concentrations.The atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and jet.As introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final reactions.Adding chemical inclusions can reduce the effectiveness of the void during the shock impacting.Under the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone inclusions.The lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense shockwave.The quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline explosive.RD_(sys)is defined by the density ratio of defective RDX to perfect crystal after dynamics relaxation and reveals the global density characteristic in shocked systems filled with chemical inclusions.When RD_(sys)is below 0.9,local hydrodynamic jet initiated by void collapse dominates upon energy localization instead of interfacial impact.This study sheds light on novel insights for understanding the shock chemistry and physical-based atomic origin in crystalline explosives considering chemical-inclusions effects.

Strength criterion for crystalline rocks considering grain size effect and tensile-compressive strength ratio

The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.

Laser-Constructing 3D Copper Current Collector with Crystalline Orientation Selectivity for Stable Lithium Metal Batteries

The practical application of lithium(Li)metal anodes in high-capacity batteries is impeded by the formation of hazardous Li dendrites.To address this challenge,this research presents a novel methodology that combines laser ablation and heat treatment to precisely induce controlled grain growth within laser-structured grooves on copper(Cu)current collectors.Specifically,this approach enhances the prevalence of Cu(100)facets within the grooves,effectively lowering the overpotential for Li nucleation and promoting preferential Li deposition.Unlike approaches that modify the entire surface of collectors,our work focuses on selectively enhancing lithiophilicity within the grooves to mitigate the formation of Li dendrites and exhibit exceptional performance metrics.The half-cell with these collectors maintains a remarkable Coulombic efficiency of 97.42%over 350 cycles at 1 mA cm^(−2).The symmetric cell can cycle stably for 1600 h at 0.5 mA cm^(−2).Furthermore,when integrated with LiFePO4 cathodes,the full-cell configuration demonstrates outstanding capacity retention of 92.39%after 400 cycles at a 1C discharge rate.This study introduces a novel technique for fabricating selective lithiophilic three-dimensional(3D)Cu current collectors,thereby enhancing the performance of Li metal batteries.The insights gained from this approach hold promise for enhancing the performance of all laser-processed 3D Cu current collectors by enabling precise lithiophilic modifications within complex structures.

Three-dimensional topological crystalline insulator without spin-orbit coupling in nonsymmorphic photonic metacrystal

By including certain point group symmetry in the classification of band topology,Fu proposed a class of threedimensionaltopological crystalline insulators(TCIs)without spin-orbit coupling in 2011.In Fu’s model,surface states(ifpresent)doubly degenerate atГandM when time-reversal and C_(4) symmetries are preserved.The analogs of Fu’s modelwith surface states quadratically degenerate atM are widely studied,while surface states with quadratic degeneracy atГare rarely reported.In this study,we propose a three-dimensional TCI without spin-orbit coupling in a judiciously designednonsymmorphic photonic metacrystal.The surface states of photonic TCIs exhibit quadratic band degeneracy in the(001)surface Brillouin zone(BZ)center(Гpoint).The gapless surface states and their quadratic dispersion are protected by C4and time-reversal symmetries,which correspond to the nontrivial band topology characterized by Z_(2)topological invariant.Moreover,the surface states along lines fromГto the(001)surface BZ boundary exhibit zigzag feature,which is interpretedfrom symmetry perspective by building composite operators constructed by the product of glide symmetries with timereversalsymmetry.The metacrystal array surrounded with air possesses high order hinge states with electric fields highlylocalized at the hinge that may apply to optical sensors.The gapless surface states and hinge states reside in a cleanfrequency bandgap.The topological surface states emerge at the boundary of the metacrystal and perfect electric conductor(PEC),which provide a pathway for topologically manipulating light propagation in photonic devices.

Isolation of Microcrystalline Cellulose from Wood and Fabrication of Polylactic Acid(PLA)Based Green Biocomposites

An innovative microcrystalline cellulose(MCC)natural fibre powder-reinforced PLA biocomposite was investigated using the hand lay-up technique.The polymer matrix composite(PMC)samples were prepared by varying the weight percentages(wt.%)of both PLA matrix and MCC reinforcement:pure PLA/100:0,90:10,80:20,70:30,60:40 and 50:50 wt.%,respectively.From the results obtained,MCC powder,with its impressive aspect ratio,proved to be an ideal reinforcement for the PLA,exhibiting exceptional mechanical properties.It was evident that the 80:20 wt.%biocomposite sample exhibited the maximum improvement in the tensile,flexural,notched impact,compressive strength and hardness by 28.85%,20.00%,91.66%,21.53%and 35.82%,respectively compared to the pure PLA sample.Similarly,during the thermogravimetric analysis(TGA),the same 80:20 wt.%biocomposite sample showed a minimum weight loss of 20%at 400℃,among others.The morphological study using Field Emission Scanning Electron Microscopy(FE-SEM)revealed that the uniform distribution of cellulose reinforcement in the PLA matrix actively improved the mechanical properties of the biocomposites,especially the optimal 80:20 wt.%sample.Importantly,it was evident that the optimal PLA/cellulose biocomposite sample could be a suitable and alternative sustainable,environmentally friendly and biodegradable material for semi/structural applications,replacing synthetic and traditional components.

Organic Compounds Possessing the Plastic Crystalline Phase: Calculation of Their Fusion Enthalpies

For the first time, for different organic and inorganic compounds possessing the plastic crystalline phase, a new semiempirical equation describing dependence of their fusion enthalpies on such physico-chemical quantities as normal melting temperature, surface tension, molar volume and critical molar volume is received on the base of the principle of corresponding states and the energy equipartition theorem. Moreover, the proposed equation allows one to take into account the particularities of one-particle molecular rotation in the plastic crystalline phase.

Preparation and Performance Study of Cementitious Capillary Crystalline Waterproof Materials

Cementitious capillary crystalline waterproof materials(CCCW for short)offer durability and excellent waterproofing properties,making them a popular option for building waterproofing.Some scholars have studied the proportioning of such materials.However,these studies lack the relationship between the impermeability pressure of mortar and the components,and the mechanism of action is somewhat debatable.Therefore,we adopted a two-step method in our experiments.Firstly,we screened out the components that significantly impact impermeability from a variety of active components by orthogonal test.We then optimized the design of the active group ratio using the simplex lattice method.Lastly,we conducted a performance test of the optimal ratio and explored the waterproofing mechanism of homemade CCCW.

Effect of Crystalline Structure of Wood on Liquefaction

By means of X ray and gas chromatography analysis, the crystalline structure of untreated wood , alkali treated wood and benzylated wood and their liquefaction in toluene and tetrahydrofufan with HCl as a catalyst were studied .The upper solution of benzylated wood was also studied by GC MS analysis. It proved that the introduction of bulky benzyl group in wood significantly changed the crystalline structure of wood ,enlarging the free volume which facilitated the penetration of solvent into the matrix of treated wood, thus tremendously enhancing thesolubility in solvent,compared to untreated wood and alkali treated wood. The percentage of residue decreased and the combined solvent increased with the increase of weight gain revealed that the liquefaction process became easy. Furthermore, the factors that influenced the liquefaction of benzylated wood were investigated. It showed that the liquefaction performance was improved with the increase of liquefaction time and the amount of catalyst when toluene was used as a solvent, especially in the presence of THF as solvent, there existed the optimum liquefaction time and the amount of catalyst .

Fabrication of Hydrogenated Microcrystalline Silicon Thin Films at Low Temperature by VHF-PECVD

Using H 2 diluted silane,series of μc Si∶H films are fabricated at low temperature with VHF PECVD.The thickness measurements reveal that the deposition rates are obviously enhanced with higher plasma excitation frequency or working pressure,but increase firstly and then decrease with the increase of plasma power density.Raman spectra show that the crystallinity and the average grain sizes of the films strongly depend on the temperature of substrate and the concentration of silane.However,the plasma excitation frequency only has effect on the crystallinity,and a maximum occurs during the further increase of plasma excitation frequency.From XRD and TEM experiments,three preferential crystalline orientations (111),(220) and (311) are observed,and the average grain sizes are different for every crystalline orientation.

Studies on Crystalline Growth of MoFe Protein from a nifZ Deleted Strain of Azotobacter vinelandii

Under a given condition of crystallization, dark brown short rhombohedron crystals could be obtained from Δ nifZ MoFe protein purified from a nifZ deleted mutant strain of Azotobacter vinelandii Lipmann. Systematic studies on the effect of concentrations of PEG 8000,MgCl 2, NaCl,Tris and buffer pH on the crystallization and crystal growth of the protein showed that the protein could not be crystallized in lower concentrations of the chemicals and lower buffer pH. A large amount of smaller crystals of the protein appeared in a week with gradual increasing in the chemical concentrations and pH≥8.0. When the chemical concentrations were further increased, the time for crystallization was increased and a few high grade crystals of larger size were formed. If the concentrations of the chemicals were continuously increased, many crystals with smaller size, and, sometimes of poor quality appeared again and eventually ceased to produce any crystals. The optimal concentration for each of the above mentioned chemicals varies with other variable factors. Only one bigger crystal (both of the longest two sides: 0.16 mm) could be obtained in a hanging drop of protein sample when the concentrations of PEG 8000, MgCl 2, NaCl,Tris and protein were kept at 1.86%, 300 mmol/L, 400 mmol/L, 53 mmol/L and 4.64 g/L , respectively, with Tris buffer pH 8.2.