Influence ofβ-nucleating Compound Agents on the Mechanical Properties and Crystallization Behavior of Polypropylene Random Copolymer

A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.

Effect of yttrium on thermal stability and crystallization behavior of Nd_(60)Fe_(20)Al_(10)Ni_(10) amorphous alloys

The effect of yttrium on the thermal stability and crystallization behavior of Nd-Fe-Al-Ni amorphous alloys was investigated using X-ray diffraction （XRD）, differential scanning calorimeter （DSC）, and transmission electron microscopy （TEM）.The results indicated that the as-cast Nd60Fe20Al10Ni10-xYx（X=-0, 2） amorphous alloys were fabricated with some quenched-in crystals, which could be restrained by Y. With the effect of yttrium, both the crystallization temperature and exothermic peak shifted to higher temperatures, illustrating that the thermal stability could be improved. The addition of Y changed the crystallization process and final crystallization results. Moreover, the crystallites in the amorphous matrix became more homogeneous and smaller. Meanwhile, Y was useful for the passivation of oxygen in chemistry and restrained the negative effect of oxygen. The activation energies of the start of crystallization and peaking were 1.21 and 1.16 eV, respectively, according to the Kissinger equation.

Influence of Carbon Nanofiber Addition on Mechanical Properties and Crystallization Behavior of Polypropylene

Carbon nanofiber （CNF）-reinforced polypropylene （CNF/PP） composites with different CNF contents were prepared by melt mixing, and the mechanical properties and crystallization behavior of the CNF/PP composites obtained were investigated. It was found that the tensile modulus of the composites was increased with the addition of CNFs, but their elongation at break and fracture strain energy were decreased, while the tensile strength of the composites was firstly increased and then decreased due to the agglomeration of CNFs at higher loading. Nonisothermal crystallization analysis showed that the CNFs played a role as nucleating agent in PP matrix, which led to increment in the crystallization rate and the degree of crystallinity of PP. Moreover, X-ray diffraction studies showed that the CNFs incorporated in the PP matrix favored the growth of （040）-oriented PP crystals. With the increase in the CNF content, the nucleating and orientation roles of the CNFs were obviously enhanced.

Crystallization behavior of Fe_(78)Si_(13)B_9 metallic glass under high magnetic field

The effects of high magnetic field on the crystallization behavior of the Fe78Si13B9 metallic glass ribbon were studied. The samples were isothermal annealed for 30 min under high magnetic field and no field,respectively. Microstructure transformation during crystallization was identified by X-ray diffraction and transmission electron microscopy. It was found that the crystallizations of Fe78Si13B9 metallic glass processed under different conditions were that the precipitation of dendrite α-Fe（Si） and spherulite （Fe,Si）3B phases forms amorphous matrix and then the metastable （Fe,Si）3B phase transforms into the stable Fe2B phase. The grain size of the crystals is smaller and more homogeneous for the isothermal annealed samples under high magnetic field in comparison with that under no field indicating that the crystallization behavior of Fe78Si13B9 metallic glass is suppressed by high magnetic field.

Effect of Rare Earth on the Crystallization Behavior of Li_2O-Al_2O_3-SiO_2 Glass-ceramic

X-ray powder diffraction and Fourier transform infrared spectroscopy were applied for characterization of Li2O-Al2O3-SiO2 glass-ceramic powders doped with Eu2O3,Gd2O3 and Er2O3,respectively,in the conditions of different heat-treatment temperatures and with various amounts.The powders were derived from the polyacrylamide gel method.The results show that,the wet gels prepared by polyacrylamide perform a unique crystallization behavior in the process of drying,comparing with some customary preparation such as melt processing.The main crystal phase and crystallization sequence of Li2O-Al2O3-SiO2 micro-powders have no distinct with addition of Eu2O3,Gd2O3 or Er2O3,while the crystallization temperature of the β-spodumene decreased and the amount of the β-spodumene increased.

Study on Morphology and Non-isothermal Crystallization Behavior of Poly(phenylene sulfide)/Poly(ethylene-co-cyclo-hexane 1,4-dimethanol terephthalate) Blend

A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.

STUDIES ON THE MECHANICAL PROPERTIES AND CRYSTALLIZATION BEHAVIOR OF POLYETHYLENE COMPOSITES

The effects of interfacial modifier on the mechanical, dynamic mechanical properties and crystallization behavior of the polyethylene composites were investigated in the present paper. It was found that the interfacial modifer significantly improved the mechanical properties, influenced the dynamic mechanical spectra and slightly changed the crystallization behavior. The results showed that the interfacial modifier changed the dispersion state of dispersed phase of the composites, resulting in different phase structure, which was the major reason leading to different mechanical and crystallization properties.

Crystallization Behavior and Thermal Properties of PP/MgAl LDH Nanocomposites Prepared in Non-polar Solution

Polypropylene（PP）/MgAl layered double hydroxide（MgAl LDH） nanocomposites were synthesized by refluxing PP and dodecyl sulfate-intercalated MgAI LDH[MgAI（DS）] in non-polar xylene. Their structure, thermal and crystallization properties were studied via X-ray diffraction（XRD）, transmission electron microscopy（TEM）, thermogravimetric analysis（TGA）, differential scanning calorimetry（DSC）, and polarized light microscopy（PLM）. The nanoscaled dispersion of MgAI（DS） nanolayeres in the PP matrix was verified by the disappearance of the d（003） XRD diffraction peak of MgAI（DS） and observation of TEM image. The DSC data show that the SDS/LDH inorganic components negatively affect the crystallization properties of PP and decrease the size of PP sphcrulites because the inorganic components act as additional nuclei. The PP/MgA1 LDH nanocomposites have a faster charring progress in a temperature range of 250--430 ℃ and a better thermal stability above 320℃ than pure PP.

Crystallization Behavior of Polymer Derived Silicon Carbide Sintered Through Microwave Heating Technique

A self-crosslinkable liquid highly branched polycarbosilane（LHBPCS） with 5.07% vinyl group and a C/Si ratio of 1.33 was used as the precursor to prepare Si C ceramic material. Microwave heating technique and conventional heating method were applied for the heating treatment process. It was found that, compared with conventional heating method, microwave heating technique could enhance the crystallinity of Si C ceramic material with small grain size at much lower curing temperature and within shorter time. In addition, the SiO_2 additive could lead to less α-Si C and excess carbon, but worsen the crystallinity of β-Si C in the final samples.

The Crystallization Behavior and Stability of Chromite Synthesized in Chromium-Containing Wastewater at Room Temperature

The ferrite process can not only purify wastewater containing heavy metal ions but also recycle valuable metals from wastewater. Therefore, it is considered a promising technology to treat chromiumcontaining wastewater. However, the process has not been extensively applied in industry due to its high synthesis temperature. In this paper, the feasibility of chromite synthesis at room temperature was comprehensively studied. The effects of critical factors on the effluent quality and the crystallization behavior and stability of the synthetic products were investigated. Results showed that the removal ratio of chromium from wastewater was over 99.0%, and the chromium concentration in the supernatant reached the sewage discharge standard after undergoing the ferrite process at room temperature. Increases in the aeration rate, stirring rate, and reaction time were favorable for the formation of stable chromite. The particles obtained by the ferrite process at room temperature were characterized by a compact structure, and the maximum size of the particles reached 52 μm. Chromium gradually entered the spinel crystal structure during the synthesis process, and the molecular formula of the synthetic chromite might be Fe3-xCrxO4, in which x was approximately 0.30. The path of the microscopic reaction was proposed to illuminate the synthesis mechanism of chromite under room temperature conditions. The present study has laid the foundation for the industrial application of the ferrite process in the purification and utilization of chromium-containing wastewater.

MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF BIODEGRADABLE BLEND OF POLY(β—HYDROXYBUTYRATE)AND POLY(D,L—LACTIDE)—CO—POLY(ETHYLENE GLYCOL)

Studies on the miscibility of PHB/PELA blends showed that PHB and PELA were miscible in amorphous state.The crystallization behavior of PHB in the blend was strongly de- pendent on the addition of PELA component.

Crystallization behavior of electroless Co-Ni-B alloy plated in magnetic field in presence of cerium

The electrochemical property, chemical composition and crystal structure of electroless Co-Ni-B-Ce alloy plated in general state as well as in magnetic field were studied using potentiometer, plasma emission spectrometer, X-ray diffractometer, transmission electron microscope. The results show that the static potential and polarizability of electroless Co-Ni-B alloy are remarkably improved as the plating is carried out in magnetic field in the presence of a little amount of cerium in plating bath. Because of the action of magnetic field and rare earth element cerium, the boron content in alloy decreases, while cobalt and nickel contents increase. As a result, the amorphous Co-Ni-B alloy transforms to the microcrystalline Co-Ni-B-Ce alloy when the plating is in general state, and the Co-Ni-B alloy makes a crystalline transformation because of the action of magnetic field and rare earth element cerium.

Crystallization behavior of melt-spun NdFeB permanent magnets

The crystallization behavior of melt spun Nd 8.5 Fe 78 Co 5Cu 1Nb 1B 6.5 ribbons was investigated using dynamic differential scanning calorimetry (DSC) and X ray diffractometry (XRD). It was found that the as spun ribbons crystallize in two steps: at first the Nd 3Fe 62 B 14 + α Fe phases are formed and subsequently Nd 3Fe 62 B 14 transformed to Nd 2Fe 14 B and α Fe upon heating above 680?℃. The effective activation energy of two crystallization peaks are 332.0?kJ/mol and 470.5?kJ/mol, respectively. As the wheel speed increases, the magnetic properties of the magnet change obviously. When the wheel speed is 18?m/s, the best magnetic properties of the magnet was obtained after the sample was annealed at 690?℃ for 8?min: B r=0.74T, i H c=421.7?kA/m, ( BH ) max =64.5?kJ/m 3.

Crystallization behavior of Ti_3Al-Nb alloy laser beam welding joints

CO2 laser beam welding experiment of Ti3Al-Nb alloy was conducted by adopting overlay welding, the resulting special crystallization phenomenon of welding joint was analyzed. The joints have obvious crystallizing layer phenomenon with clear bond-like contours after laser welding. The results of X-spectrofluorimetry and energy spectrum analysis indicate that the non-uniform distribution of elements exists in crystallizing layer, because the temperature gradient is an important factor that impacts the alloy crystallization behavior. Furthermore, the effects of welding heat source, welding speed, pulse frequency and welding preheat on crystallizing layer distribution were investigated.

Crystallization Behavior of Poly(Tetramethylene Oxide) Influenced by the Crystallization Condition of Poly(Butylene Succinate) in Their Copolymers

The effect of crystallization conditions of poly(butylene succinate)(PBS) component on the crystallization of poly(tetramethylene oxide)(PTMO) component in their segment block copolymer, with a higher PTMO content(PTMO mass fraction is 67%), was investigated by DSC and temperature-dependent FTIR. It is found that the isothermal crystallization time(tIC) of PBS has an effect on the crystallization behavior of PTMO component. Perturbation correlation move-window two-dimensional(PCMW2 D) correlation analysis and generalized 2 D correlation analysis(2 DIR) were performed to explore the origin of this phenomenon. The PCMW2 D and 2 DIR results show that the correlation intensity peak observed at around 20 ℃ for PTMO is due to the PTMO chains movements forced by the PBS chains folded movements. If tIC of PBS at temperature of 20 ℃ is prolonged, more PTMO components are incorporated in the region between PBS lamellae and the peak at-7.6 ℃(belonging to less-constricted PTMO chains) changes smaller and even disappears, while the peak at-16.3 ℃ belonging to more-constricted PTMO chains gets bigger. A crystallization model was also established in this study. The results of tensile testing showed that tensile strength slightly increased and elongation at break decreased with increasing heat treatment time at 40 ℃.

Crystallization Behavior of Palm Kernel Oil Monitored by <i>In-Situ</i>Focused Beam Reflectance Measurement (FBRM) and Particles Video Microscope (PVM) during Suspension Crystallization

Crystallization behavior and kinetics study of palm kernel oil (PKO) were investigated using differential scanning calorimetry (DSC) by controlling cooling and reheating rate within a certain range of temperature. The evolution of morphology and particle counts was analyzed by focused beam reflectance measurement (FBRM) and particles video microscope (PVM) at the nucleation stage during suspension crystallization. The particle counts and morphological evolution from needle-like aggregations to amorphous form from PVM were observed during the initial crystallization stage, which meant that a phase transition was likely to occur. This work can give a better understanding of complicated fat system crystallization behavior and provide some critical instructions to control fractionation process.

Effects of 5%Ni addition on thermal stability and crystallization behavior of Mg_(65)Cu_(25)Tb_(10) bulk metallic glass

The effects of 5%Ni addition on the glass forming ability,thermal stability and crystallization behavior of Mg65Cu25Tb10 bulk metallic glass were investigated using X-ray diffractometry,differential scanning calorimetry and transmission electron microscopy.The small amount of Ni addition reduces the glass forming ability and thermal stability due to a significant decrease in the crystallization activation energy.Analyses of crystallization kinetics give evidence to the existence of quenched-in nuclei in amorphous Mg65Cu20Ni5Tb10.Final crystallization products are basically same for Mg65Cu25Tb10 and Mg65Cu20Ni5Tb10.

Crystallization behavior of Ti_(61.67) Zr_(17.15)Ni_(14.80)Cu_(6.38) glass-forming alloy

Ti 61.67 Zr 17.15 Ni 14.80 Cu 6.38 (atom fraction, %) metallic glass has applications in brazing. Using the hammer and anvil technique, Ti 61.67 Zr 17.15 Ni 14.80 Cu 6.38 metallic glass was prepared. The crystallization behavior for this metallic glass was investigated by differential scanning calorimetry(DSC), X ray diffractometry(XRD) and transmission electron microscopy(TEM). There are three stages in DSC curves of crystallization. The reduced glass temperature T rg is 0.42. The kinetic parameters of crystallization were calculated by a set of equations of the maximum crystallization rate. The crystalline phase formed in the MSI(Metastable stage I) is Zr 2Cu, in the MSII is α Ti and in the MSIII is Ti 2Ni. This kind of alloy has lower glass forming ability, and the Ti 61.67 Zr 17.15 Ni 14.80 Cu 6.38 metallic glass has lower thermal stability.

Crystallization behavior of amorphous Zr_(70)Cu_(20)Ni_(10) alloy annealed at 380 ℃

Crystallization behavior of amorphous Zr 70 Cu 20 Ni 10 alloy isothermally annealed at 380 ℃ was first investigated by employing the differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). It has been found that an exothermic peak appears in the DSC trace when the annealing time is about 17～18 min, indicating a certain phase transformation occurs in the matrix of amorphous Zr 70 Cu 20 Ni 10 alloy. Meanwhile, isothermal annealing experiments for amorphous Zr 70 Cu 20 Ni 10 alloy ranging from 360 ℃ to 400 ℃ with a temperature interval of 10 ℃ were also carried out, from which no exothermic reaction can be observed except for the case of 380 ℃. This behavior indicates that the phase transformation during isothermal annealing of amorphous Zr 70 Cu 20 Ni 10 alloy is strongly temperature and time dependent. Further investigations are required to reveal the nature of such phenomenon.

Investigation on crystallization behavior between(Sc_(x)Yb_(1−x))O_(1.5)and CMAS:A new insight in the effect of Sc substitution

Environmental barrier coatings(EBCs)with thermomechanical robustness against calcium–magnesium–aluminum–silicate(CMAS)deposits are in high demand.The aim of this work was to clarify the influence of Sc^(3+)on the crystallization behavior of Yb-based coatings against CMAS deposits.The reaction products of solid solutions with compositions traversing the Sc_(2)O_(3)–Yb_(2)O_(3)system indicate that Sc^(3+)tends to form[BO_(6)]coordination polyhedra in the crystal structure to promote the formation of garnet and diopside,while Yb^(3+)occupies 7-,8-,and 9-coordinate sites to crystallize apatite and silicocarnotite.The transformation of crystalline products from apatite/silicocarnotite to garnet/diopside greatly improves the efficiency of CMAS melt consumption and facilitates the prevention of its further penetration and corrosion.Based on the commonality of cation occupancy in crystallography,an A(CaO+YbO_(1.5))–B(ScO_(1.5)+MgO+AlO_(1.5))–T(SiO_(2))pseudoternary phase diagram is established,which has great potential for describing phase equilibrium in coating-deposit systems and can provide guidance for the compositional design of corrosion-resistant coatings.