THEORY AND EXPERIMENTAL INVESTIGAION OF FLEXURAL WAVE PROPAGATION IN THIN RECTANGULAR PLATE WITH PERIODIC STRUCTURE

With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane-wave expansion （PWE） method, and directional band gaps are found in the ΓX direction. The acceleration frequency response in the ΓX direction of such a plate with finite structure is simulated with the finite element method and verified with a vibration experiment. The frequency ranges of sharp drops in the calculated and measured acceleration frequency response curves are in basic agreement with those in the band structures. Thin plate is a widely used component in the engineering structures. The existence of band gaps in such periodic structures gives a new idea in vibration control of thin plates.

Finite difference time domain analysis of two-dimensional surface acoustic wave piezoelectric phononic crystals at radio frequency

The finite-difference time-domain （FDTD） method is proposed for analyzing the surface acoustic wave （SAW） propagation in two-dimensional （2D） piezoelectric phononic crystals （PCs） at radio frequency （RF）, and also experiments are established to demonstrate its analysis result of the PCs＇ band gaps. The FDTD method takes the piezoelectric effect of PCs into account, in which periodic boundary conditions are used to decrease memory/time consumption and the perfectly matched layer boundary conditions are adopted as the SAW absorbers to attenuate artificial reflections. Two SAW delay lines are established with/without piezoelectric PCs located between interdigital transducers. By removing several echoes with window gating function in time domain, delay lines transmission function is achieved. The PCs＇ transmission functions and band gaps are obtained by comparing them in these two delay lines. When Aluminum/128°YX-LiNbO3 is adopted as scatter and substrate material, the PCs＇ band gap is calculated by this FDTD method and COMSOL respectively. Results show that computational results of FDTD agree well with experimental results and are better than that of COMSOL.

Boundary element method for calculation of elastic wave transmission in two-dimensional phononic crystals

A boundary element method(BEM) is presented to compute the transmission spectra of two-dimensional(2-D) phononic crystals of a square lattice which are finite along the x-direction and infinite along the y-direction.The cross sections of the scatterers may be circular or square.For a periodic cell,the boundary integral equations of the matrix and the scatterers are formulated.Substituting the periodic boundary conditions and the interface continuity conditions,a linear equation set is formed,from which the elastic wave transmission can be obtained.From the transmission spectra,the band gaps can be identified,which are compared with the band structures of the corresponding infinite systems.It is shown that generally the transmission spectra completely correspond to the band structures.In addition,the accuracy and the efficiency of the boundary element method are analyzed and discussed.

A comparative study of wave localization in locally resonant Thue–Morse, Rudin–Shapiro and Period-Doubling aperiodic structures

The localization characteristics of the in-plane elastic waves in locally resonant aperiodic phononic crystals are examined in this study. In particular, the phononic crystals generated according to the Thue-Morse, Rudin-Shapiro and Period-Doubling sequences are theoretically investigated by using the extended transfer matrix method. For comparison, the binary and ternary locally resonant systems are considered, and their band structures are characterized by using the localization factors. Moreover, the influences of structural arrangement, material combination, incidence angle, number of components, length ratio, and random disorder on the band structures are also discussed. Some novel and interesting phenomena are observed and discussed.

Experimental evidence of Bloch surface waves on photonic crystals with thin-film LiNbO_3 as a top layer

Strong nonlinear, electro-optical, and thermo-optical properties of lithium niobate(LN) have gained much attention. However, the implementation of LiNbO_3 in real devices is not a trivial task due to difficulties in manufacturing and handling thin-film LN. In this study, we investigate an optical device where the Bloch surface wave(BSW) propagates on the thin-film LN to unlock its properties. First, access to the LN film from air(or open space) is important to exploit its properties. Second, for sustaining the BSW, one-dimensional photonic crystal(1DPhC) is necessary to be fabricated under the thin-film LN. We consider two material platforms to realize such a device: bulk LN and commercial thin-film LN. Clear reflectance dips observed in far-field measurements demonstrate the propagation of BSWs on top of the LN surface of the designed 1DPhCs.

Band structure properties of elastic waves propagating in the nanoscaled nearly periodic layered phononic crystals

The localization factor is used to describe the band structures for P wave propagating normally in the nanoscaled nearly periodic layered phononic crystals. The localization factor is calculated by the transfer matrix method based on the nonlocal elastic continuum theory.Three kinds of nearly periodic arrangements are concerned, i.e., random disorder, quasiperiodicity and defects. The influences of randomly disordered degree of the sub-layer＇s thickness and mass density, the arrangement of quasi-periodicity and the location of defect on the band structures and cut-off frequency are analyzed in detail.