Metastable face-centered cubic ruthenium-based binary alloy for efficient alkaline hydrogen oxidation electrocatalysis

Metastable nanostructured electrocatalyst with a completely different surface environment compared to conventional phase-based electrocatalyst often shows distinctive catalytic property.Although Ru-based electrocatalysts have been widely investigated toward hydrogen oxidation reaction(HOR)under alkaline electrolytes,these studies are mostly limited to conventional hexagonal-close-packed(hcp)phase,mainly arising from the lack of sufficient synthesis strategies.In this study,we report the precise synthesis of metastable binary RuW alloy with face-centered-cubic(fcc)phase.We find that the introduction of W can serve as fcc phase seeds and reduce the formation energy of metastable fcc-RuW alloy.Impressively,fcc-RuW exhibits remarkable alkaline HOR performance and stability with the activity of 0.67 mA cm_(Ru)^(-2)which is almost five and three times higher than that of hcp-Ru and commercial Pt/C,respectively,which is attributed to the optimized binding strength of adsorbed hydroxide intermediate derived from tailored electronic structure through W doping and phase engineering.Moreover,this strategy can also be applied to synthesize other metastable fcc-RuCr and fcc-RuMo alloys with enhanced HOR performances.

Synthesizing active and durable cubic ceria catalysts(<6 nm)for fast dehydrogenation of bio-polyols to carboxylic acids coproducing green H_(2)

Dehydrogenation is considered as one of the most important industrial applications for renewable energy.Cubic ceria-based catalysts are known to display promising dehydrogenation performances in this area.Large particle size(>20 nm)and less surface defects,however,hinder further application of ceria materials.Herein,an alternative strategy involving lactic acid(LA)assisted hydrothermal method was developed to synthesize active,selective and durable cubic ceria of<6 nm for dehydrogenation reactions.Detailed studies of growth mechanism revealed that,the carboxyl and hydroxyl groups in LA molecule synergistically manipulate the morphological evolution of ceria precursors.Carboxyl groups determine the cubic shape and particle size,while hydroxyl groups promote compositional transformation of ceria precursors into CeO_(2) phases.Moreover,enhanced oxygen vacancies(Vo)on the surface of CeO_(2) were obtained owing to continuous removal of O species under reductive atmosphere.Cubic CeO_(2) catalysts synthesized by the LA-assisted method,immobilized with bimetallic PtCo clusters,exhibit a record high activity(TOF:29,241 h^(-1))and Vo-dependent synergism for dehydrogenation of bio-derived polyols at 200℃.We also found that quenching Vo defects at air atmosphere causes activity loss of PtCo/CeO_(2) catalysts.To regenerate Vo defects,a simple strategy was developed by irradiating deactivated catalysts using hernia lamp.The outcome of this work will provide new insights into manufacturing durable catalyst materials for aqueous phase dehydrogenation applications.

A novel rapid cooling assembly design in a high-pressure cubic press apparatus

In traditional high-pressure–temperature assembly design, priority has been given to temperature insulation and retention at high pressures.This limits the efficiency of cooling of samples at the end of experiments, with a negative impact on many studies in high-pressure Earth andplanetary science. Inefficient cooling of experiments containing molten phases at high temperature leads to the formation of quench textures,which makes it impossible to quantify key compositional parameters of the original molten phase, such as their volatile contents. Here,we present a new low-cost experimental assembly for rapid cooling in a six-anvil cubic press. This assembly not only retains high heatingefficiency and thermal insulation, but also enables a very high cooling rate (∼600 ℃/s from 1900 ℃ to the glass transition temperature).Without using expensive materials or external modification of the press, the cooling rate in an assembly (∼600 ℃/s) with cube lengths of38.5 mm is about ten times faster than that in the traditional assembly (∼60 ℃/s). Experiments yielding inhomogeneous quenched melttextures when the traditional assembly is used are shown to yield homogeneous silicate glass without quench textures when the rapid coolingassembly is used.

Accounting for Quadratic and Cubic Invariants in Continuum Mechanics–An Overview

The differential equations of continuum mechanics are the basis of an uncountable variety of phenomena and technological processes in fluid-dynamics and related fields.These equations contain derivatives of the first order with respect to time.The derivation of the equations of continuum mechanics uses the limit transitions of the tendency of the volume increment and the time increment to zero.Derivatives are used to derive the wave equation.The differential wave equation is second order in time.Therefore,increments of volume and increments of time in continuum mechanics should be considered as small but finite quantities for problems of wave formation.This is important for calculating the generation of sound waves and water hammer waves.Therefore,the Euler continuity equation with finite time increments is of interest.The finiteness of the time increment makes it possible to take into account the quadratic and cubic invariants of the strain rate tensor.This is a new branch in hydrodynamics.Quadratic and cubic invariants will be used in differential wave equations of the second and third order in time.

ANovel Non-Isolated Cubic DC-DC Converter with High Voltage Gain for Renewable Energy Power Generation System

In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effectively enhance voltage gain and reduce device stress.To address the issue of low output voltage in current renewable energy power generation systems,this study proposes a novel non-isolated cubic high-gain DC-DC converter based on the traditional quadratic DC-DC boost converter by incorporating a SC and a SL-SC unit.Firstly,the proposed converter’s details are elaborated,including its topology structure,operating mode,voltage gain,device stress,and power loss.Subsequently,a comparative analysis is conducted on the voltage gain and device stress between the proposed converter and other high-gain converters.Then,a closed-loop simulation system is constructed to obtain simulation waveforms of various devices and explore the dynamic performance.Finally,an experimental prototype is built,experimental waveforms are obtained,and the experimental dynamic performance and conversion efficiency are analyzed.The theoretical analysis’s correctness is verified through simulation and experimental results.The proposed converter has advantages such as high voltage gain,low device stress,high conversion efficiency,simple control,and wide input voltage range,achieving a good balance between voltage gain,device stress,and power loss.The proposed converter is well-suited for renewable energy systems and holds theoretical significance and practical value in renewable energy applications.It provides an effective solution to the issue of low output voltage in renewable energy power generation systems.

Effect of Size and Initial Water Content on the Effective Diffusion Coefficient during Convective Drying of Sweet Potato Cut into Cubic and Cylindrical Shapes

In this article, we investigated the influence of size and initial water content on the effective diffusion coefficient of sweet potatoes samples cut into cubic and cylindrical shapes. The sizes of the cubic samples are 0.5, 1, 1.5, 1.75, 2, 2.5 and 3 cm edge with a respective initial water content of 2.7, 3.76, 3.48, 2.68, 3.28, 2.17 and 2.29 kg/kgms. For cylindrical samples, the radius is set at 0.5 cm and sample heights are 1, 1.5, 2, 2.5, 3, 3.5 and 4 cm with respective water contents of 2.2, 3.19, 2.85, 2.1, 2.17, 2.39 and 2.03 kg/kgms. The effective diffusion coefficients of cubic samples are of the order of 10−10 and 10−9 m2∙s−1 grew with sample edge. As for the cylindrical samples, the effective diffusion coefficients were of the order of 10−9 m2∙s−1 and there was no linear correlation between cylinder height and their effective diffusion coefficient. As for the examination of the initial water content on the effective diffusion coefficient, it turned out that the initial water content had no influence on the effective diffusion coefficient of the sweet potato samples.

Transformation of Hexagonal Lu to Cubic LuH_(2+x)Single-Crystalline Films

With the recent report of near ambient superconductivity at room temperature in the N-doped lutetium hydride(Lu-H-N)system,the understanding of cubic Lu-H compounds has attracted worldwide attention.Generally,compared to polycrystals with non-negligible impurities,the single-crystalline form of materials with high purity can provide an opportunity to show their hidden properties.However,the experimental synthesis of single-crystalline cubic Lu-H compounds has not been reported so far.Here,we develop an easy way to synthesize highly pure LuH_(2+x)single-crystalline films by the post-annealing of Lu single-crystalline films(purity of 99.99%)in H_(2)atmosphere.The crystal and electronic structures of films were characterized by x-ray diffraction,Raman spectroscopy,and electrical transport.Interestingly,Lu films are silver-white and metallic,whereas their transformed LuH_(2+x)films become purple-red and insulating,indicating the possible formation of an unreported electronic state of Lu-H compounds.Our work provides a novel route to synthesize and explore more singlecrystalline Lu-H compounds.

CONFORMALLY FLAT AFFINE HYPERSURFACES WITH SEMI-PARALLEL CUBIC FORM

In this paper,we study locally strongly convex affine hypersurfaces with the vanishing Weyl curvature tensor and semi-parallel cubic form relative to the Levi-Civita connection of the affine metric.As a main result,we classify these hypersurfaces as not being of a flat affine metric.In particular,2 and 3-dimensional locally strongly convex affine hypersurfaces with semi-parallel cubic forms are completely determined.

Cubic Ice Captured by In Situ Transmission Electron Microscope

Nearly a hundred years ago,the Nobel laureate Linus Pauling proposed based on the'ice rule'[1]and residual entropy theory that the structural entropy of ice is the same for common hexagonal ice(Ih)with tetrahedrally coordinated water molecules assembling into a hexagonal close-packing manner and cubic ice(ice Ic)in a cubic closepacking manner.[2]

Source Quantitative Identification by Reference-Based Cubic Blind Deconvolution Algorithm

The semi-blind deconvolution algorithm improves the separation accuracy by introducing reference information.However,the separation performance depends largely on the construction of reference signals.To improve the robustness of the semi-blind deconvolution algorithm to the reference signals and the convergence speed,the reference-based cubic blind deconvolution algorithm is proposed in this paper.The proposed algorithm can be combined with the contribution evaluation to provide trustworthy guidance for suppressing satellite micro-vibration.The normalized reference-based cubic contrast function is proposed and the validity of the new contrast function is theoretically proved.By deriving the optimal step size of gradient iteration under the new contrast function,we propose an efficient adaptive step optimization method.Furthermore,the contribution evaluation method based on vector projection is presented to implement the source contribution evaluation.Numerical simulation analysis is carried out to validate the availability and superiority of this method.Further tests given by the simulated satellite experiment and satellite ground experiment also confirm the effectiveness.The signals of control moment gyroscope and flywheel were extracted,respectively,and the contribution evaluation of vibration sources to the sensitive load area was realized.This research proposes a more accurate and robust algorithm for the source separation and provides an effective tool for the quantitative identification of the mechanical vibration sources.

Coupled CUBIC Congestion Control for MPTCP in Broadband Networks

Recently,multipath transmission control protocol(MPTCP)was standardized so that data can be transmitted through multiple paths to utilize all available path bandwidths.However,when high-speed long-distance networks are included in MPTCP paths,the traffic transmission performance of MPTCP is severely deteriorated,especially in case the multiple paths’characteristics are heavily asymmetric.In order to alleviate this problem,we propose a“Coupled CUBIC congestion control”that adopts TCP CUBIC on a large bandwidth-delay product(BDP)path in a linked increase manner for maintaining fairness with an ordinary TCP traversing the same bottleneck path.To verify the performance excellence of the proposed algorithm,we implemented the Coupled CUBIC Congestion Control into Linux kernels by modifying the legacy MPTCP linked-increases algorithm(LIA)congestion control source code.We constructed asymmetric heterogeneous network testbeds mixed with large and small BDP paths and compared the performances of LIA and Coupled CUBIC by experiments.Experimental results show that the proposed Coupled CUBIC utilizes almost over 80%of the bandwidth resource in the high BDP path,while the LIA utilizes only less than 20%of the bandwidth for the same path.It was confirmed that the resource utilization and traffic transmission performance have been greatly improved by using the proposed Coupled CUBIC in high-speed multipath networks,as well as maintaining MPTCP fairness with competing single-path CUBIC or Reno TCP flows.

Large Eddy Simulations of Rayleigh-Bénard Convection in a Cubic Cavity

This paper conducts a Large Eddy Simulation (LES) of Rayleigh Bénard convection in a cubic cavity based on the WMLES S-Omega subgrid-scale model. For a cubic cavity with a vertical temperature difference of 6.7°C and 20°C, the velocity pulsation profiles and the mean velocity profiles of the vertical section in the middle of the cubic cavity were simulated, respectively. And they are consistent with the experiment results. Furthermore, the mean velocity field of the vertical cross-section in the middle of the cavity was calculated. Structures of the mean velocity field in the two cases are similar. A counterclockwise large vortex is found to occupy the cavity, and there are two small clockwise vortices in the lower left and upper right corners, and the mean velocity fields at two different temperature differences are consistent with the experimental results. The two-dimensional instantaneous temperature field and mean temperature field with different cross-sections in the z-direction, as well as the three-dimensional instantaneous isothermal surface structure, indicate that the large-scale circulation motion within the cubic cavity is moving diagonally. In addition, the structure of the mean streamline also illustrates this viewpoint. For the reverse vortex formed at two corners in the mean streamline structure, we used the Q criterion to identify and obtain two vortex structures similar to boomerangs. The basic turbulent structure in RB thermal convection includes the rising and falling plumes generated by buoyancy effects.

基于Cubic的QUIC拥塞控制算法研究与改进

为了解决单一的快速UDP网络连接(quick UDP internet connections,QUIC)拥塞控制算法导致网络利用率大幅度降低、丢包容忍度较差、网络资源利用不够充分等问题,对QUIC源码中常用的Cubic拥塞控制算法进行研究,提出了一种基于丢包和时延相结合的拥塞控制方法,从而达到充分利用带宽、提高网络吞吐量的目的,以期为相关研究人员提供参考。

双正交Hermite Cubics的对称预滤波设计

将多小波预滤波器设计的"超函数"法推广到了双正交系统,得到使联合滤波器具有m阶平衡的条件,并针对双正交Hermite Cubics,分别设计了使系统具有2阶平衡与4阶平衡的对称预滤波器.

使用鱼眼镜头制作QuickTime CubicVR

讨论了最新的QuickTime CubicVR技术的几种合成方法,并就其中最简单易行的鱼眼镜头法进行了深入的探讨,得到了这种方法的数学模型,为以后的软件开发奠定了基础。

On cubic Hermite coalescence hidden variable fractal interpolation functions

Hermite interpolation is a very important tool in approximation theory and nu- merical analysis, and provides a popular method for modeling in the area of computer aided geometric design. However, the classical Hermite interpolant is unique for a prescribed data set, and hence lacks freedom for the choice of an interpolating curve, which is a crucial requirement in design environment. Even though there is a rather well developed fractal theory for Hermite interpolation that offers a large flexibility in the choice of interpolants, it also has the short- coming that the functions that can be well approximated are highly restricted to the class of self-affine functions. The primary objective of this paper is to suggest a gl-cubic Hermite in- terpolation scheme using a fractal methodology, namely, the coalescence hidden variable fractal interpolation, which works equally well for the approximation of a self-affine and non-self-affine data generating functions. The uniform error bound for the proposed fractal interpolant is established to demonstrate that the convergence properties are similar to that of the classical Hermite interpolant. For the Hermite interpolation problem, if the derivative values are not actually prescribed at the knots, then we assign these values so that the interpolant gains global G2-continuity. Consequently, the procedure culminates with the construction of cubic spline coalescence hidden variable fractal interpolants. Thus, the present article also provides an al- ternative to the construction of cubic spline coalescence hidden variable fractal interpolation functions through moments proposed by Chand and Kapoor [Fractals, 15（1） （2007）, pp. 41-53].

基于Hermite Cubics的预滤波器与双正交平衡系统

首先将正交多小波系统的平衡性理论及预滤波理论推广到双正交系统,在此基础上,从不具有平衡性的Hermite Cubics双正交多小波出发,得到两组使系统的"低通"滤波器保持三阶多项式信号的预滤波器,最后给出一组基于Hermite Cubics系统的具有一阶平衡性的双正交多小波系统.

用Bi-cubic插值法改进H.264视频质量

通过对H.264标准的分析,提出了用Bi-cubic插值法来改进H.264标准中推荐的插值算法,以使H.264视频质量达到更好的标准,实验表明方案是可行的.

Redefined Extended Cubic B-Spline Functions for Numerical Solution of Time-Fractional Telegraph Equation

This work is concerned with the application of a redefined set of extended uniform cubic B-spline(RECBS)functions for the numerical treatment of time-fractional Telegraph equation.The presented technique engages finite difference formulation for discretizing the Caputo time-fractional derivatives and RECBS functions to interpolate the solution curve along the spatial grid.Stability analysis of the scheme is provided to ensure that the errors do not amplify during the execution of the numerical procedure.The derivation of uniform convergence has also been presented.Some computational experiments are executed to verify the theoretical considerations.Numerical results are compared with the existing schemes and it is concluded that the present scheme returns superior outcomes on the topic.

基于Cubic Hermite的改进EMD算法

传统经验模态分解(EMD)算法求取IMF分量是依据信号极值点通过三次样条插值拟合上下包络线,然后求其局部均值,存在端点效应问题,严重影响部分特征信号的提取。针对此类问题,提出一种利用Cubic Hermite插值改进EMD过程的方法,并通过LabVIEW平台实现改进后的经验模态分解。采用频率和幅值不同的2种叠加正弦信号进行算法验证,结果表明:该算法能有效缓解包络线过冲、欠冲现象,抑制低频信号的端点效应和端点附近局部失真问题。