PERVAPORATION PROPERTIES OF PDMS MEMBRANES CURED WITH DIFFERENT CROSS-LINKING REAGENTS FOR ETHANOL CONCENTRATION FROM AQUEOUS SOLUTIONS

Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...

Early changes in corneal densitometry after FS-LASIK combined with accelerated corneal cross-linking for correction of high myopia

AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHODS:In this prospectively study,130 patients underwent FS-LASIK or FS-LASIK Xtra for high myopia.Their right eyes were selected for inclusion in the study,of which 65 cases of 65 eyes in the FS-LASIK group,65 patients with 65 eyes in the FS-LASIK Xtra group.Patients were evaluated for corneal densitometry at 1,3,and 6mo postoperatively using Pentacam Scheimpflug imaging.RESULTS:Preoperative differences in corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups in different ranges were not statistically significant(P>0.05).Layer-by-layer analysis revealed statistically significant differences in the anterior(120μm),central,and total layer corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups at 1 and 3mo postoperatively(all P<0.05),the FS-LASIK Xtra group is higher than that of the FS-LASIK group.Analysis of different diameter ranges showed statistically significant differences between the FS-LASIK group and the FS-LASIK Xtra group at 1mo postoperatively in the ranges of 0–2,2–6,and 6–10 mm(both P<0.05);At 3mo postoperatively,the FS-LASIK Xtra group is higher than that of the FS-LASIK group in the ranges of 0–2 and 2–6 mm(P<0.05).At 6mo postoperatively,there were no statistically significant differences in corneal densitometry between the FS-LASIK group and the FS-LASIK Xtra group in different diameter ranges(all P>0.05).CONCLUSION:There is an increase in internal corneal densitometry during the early postoperative period after FS-LASIK Xtra for correction of high myopia.However,the densitometry values decreased to the level of conventional FS-LASIK at 6mo after surgery,with the most significant changes observed in the superficial central zone.

生成式人工智能赋能本科生科研能力培养——ChatGPT支持的CUREs教学模式

为促进高等教育中高素质创新人才培养,构建以学生为中心的科研训练与课程教学整合模式是有效途径。当前基于课程的本科生科研体验(CUREs)教学模式虽在增强学生对科学本质的理解等方面具有一定优势,但在激发学生研究动机方面存在一些不足。将支持高效反馈的生成式人工智能ChatGPT引入人机协作研究过程中,有助于改善学生的科研体验,推动科研项目化学习。通过对ChatGPT支持的CUREs教学模式的设计与实施,发现该模式有助于培养学生的科研能力,提升他们的科研知识水平、科研技能水平和科研情感水平。尽管学生认同该教学模式的有效性和易用性,但其实际效果的发挥仍需人类智慧的参与。未来需要持续升级和优化生成式人工智能技术,确保技术应用高效且符合伦理标准;应用生成式人工智能技术重构教学模式,并通过长周期、跨场域实践检验其应用效果;强调人工智能与人类智慧的互补协作,真正实现生成式人工智能赋能学生科研能力提升。

Study on Loading Leaves Density with Cage Clamp on Quality of Cured Tobaccos in Bulk-Curing Barn

In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .

Curing Characteristics and Suitable Harvest Maturity of Fresh Flue-cured Tobacco Leaves in Ankang Tobacco Growing Areas

CuItivars K326, Yunyan 87 and Guiyan 4 were used to investigate the curing characteristics and suitabIe harvest maturity of fresh fIue-cured tobacco Ieaves in Ankang tobacco growing areas. ResuIts indicated that the water Ioss of K326 was sIow,and the Ieaves were resistant to curing and reIative easiIy to cure. The water Ioss of Yunyan 87 and Guiyan 4 were quick, and the Ieaves with normal resistance to curing were reIative difficuIt to cure. For Guiyan 4, the shrinkage of CM1 maturity was the Iargest. For K326 and Yunyan 87, the shrinkages of CM2 maturity were the Iargest whiIe the shrinkage of CM1 maturity was the Iowest, but the difference did not reach statistical significance. The proportion of top-middIe-grade tobacco Ieaves and average price for K326 were the highest with XM2, CM2 and BM2 maturity, and for Yunyan 87 were XM1, CM3 and BM2 maturity. For K326, Ieaves with XM2, CM2 and BM2 maturity showed the balanced chemical components and the best smoking quality.

Effects of Two Curing Methods on Quality of Yellow Sun-cured Tobacco

[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.

Effects of Different Flue-curing Barns on Aroma Quality of Upper Flue-cured Tobacco Leaves of K326

[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.

Cure Kinetics of DGEBA with Hyperbranched Poly(3-hydroxyphenyl) Phosphate as Curing Agent Studied by Non-isothermal DSC

The cure kinetics of diglycidyl ether of bisphenol A （DGEBA） with hyperbranched poly （3-hydroxyphenyl） phosphate（HHPP） as the curing agent was investigated by means of non-isothermal differential scanning calorimetry （DSC） at various heating rates. The results were compared with the corresponding results by using 1,3-dihydroxybenzene（DHB） as a model compound. The results show that HHPP can enhance the cure reaction of DGEBA, resulting in the decrease of the peak temperature of the curing curve as well as the decrease of the activation energy because of the flexible --P--O-- groups in the backbone of HHPP. However, both the activation energy of the cured polymer and the peak temperature of the curing curve are increased with DHB as a curing agent. The cure kinetics of the DGEBA/HHPP system was calculated by using the isoconversional method given by Malek. It was found that the two-parameter autocatalytic model（Sestak-Berggren equation） is the most adequate one to describe the cure kinetics of the studied System at various heating rates. The obtained non-isothermal DSC curves from the experimental data show the results being accordant with those theoretically calculated.

The Mechanism of Carotenoid Degradation in Flue-Cured Tobacco and Changes in the Related Enzyme Activities at the Leaf-Drying Stage During the Bulk Curing Process

The mechanism of carotenoid degradation and the changes in the activities of related enzymes in flue-cured tobacco at the leaf-drying stage during the bulk-curing process were studied in order to provide theoretical basis for optimization of curing technology. The effect of different rising speeds of temperature on the carotenoid degradation and the related enzymes activities at the color-fixing stage during the bulk curing process was studied by using the electric-heated fluecuring barn designed by Henan Agricultural University, China, based on curing technology with yellowing at low temperature and moderate humidity and leaf drying at moderate humidity. The results showed that the carotenoid degradation components （β-carotene, lutein, neoxanthin, and violaxthin） decreased gradually at the color-fixing stage during the bulk curing process. The carotenoid degradation components viz.,β-carotene, lutein, neoxanthin, and violaxthin at the slow heating curing （T1） were relatively higher than the rapid heating curing （T2） accounting for 10, 2, 32 and 32% respectively, but there were no differences among treatments （P〉 0.05）. The effect of different conditions of curing on the activities of enzymes related to carotenoids degradation were significant. The lipoxygenase, phenylalanine ammonialyase, peroxidase, and polyphenol oxidase enzymes had a bidirectional effect on the quality of tobacco leaves and it was beneficial to form more premise matter of aroma based on the higher enzyme activities at the early leaf-drying stage. The slow heating could regulate the change in various enzymes＇ activities reasonably, making cell redox reaction to reach the dynamic balance and make the degradation of carotenoids adequately. Meanwhile, it could avoid the occurrence of browning reaction and provide foundation for improving the quality of tobacco and optimization of technology for bulk curing and further enhancing aroma.

Experimental study on the treatment of rabbit corneal melting after alkali burn with Collagen cross-linking

AIM: To evaluate the effect of Collagen cross-linking on the prevention of melting in rabbit corneas after alkali burn. METHODS: Twenty New Zealand white rabbits were randomly divided into model control group and collagen cross-linking treatment group. The second group of rabbits received collagen cross linked treatment. Both groups were applied with antibiotic eye drops to prevent infection. The corneas were evaluated for melting, opacity, pathological and immunohistochemistry, record the changes when 28 days after the animals were killed. RESULTS: In the control group, 6 out of 8 rabbits showed corneal melting after injury (14 +/- 4) days, while two corneal perforated. In collagen cross-linking treatment group, one rabbit showed corneal melting after injury 23 days, without corneal perforation; corneal dissolution rate between the two groups was significantly different (P <0.05). Pathological examination suggested that in the treatment group, mild corneal edema, mild damage to collagen fibers, inflammatory cell infiltration was significantly less than the control group. Immunohistochemistry showed that corneal collagen fibers arranged in neat rows in the control group. CONCLUSION: Collagen cross-linking treatment not only can prevent and delay the corneal melting after alkali burn, but also can reduce the destruction of corneal collagen fibers and infiltration of inflammatory cells in the corneal tissue.

Radiation-induced cross-linking:a novel avenue to permanent 3D modification of polymeric membranes

Membrane fouling is always the biggest problem in the practice of membrane separation technologies,which strongly impacts their applicability,separation efficiency,cost effectiveness,and service lifespan.Herein,a simple but effective 3D modification approach was designed for permanently functionalizing polymeric membranes by directly cross-linking polyvinyl alcohol(PVA)under gamma-ray irradiation at room temperature without any additives.After the modification,a PVA layer was constructed on the membrane surface and the pore inner surface of polyvinylidene fluoride(PVDF)membranes.This endowed them with good hydrophilicity,low adsorption of protein model foulants,and easy recoverability properties.In addition,the pore size and distribution were customized by controlling the PVA concentration,which enhanced the rejection ability of the resultant membranes and converted them from microfiltration to ultrafiltration.The crosslinked PVA layer was equipped with the resultant membranes with good resistance to chemical cleaning by acidic,alkaline,and oxidative reagents,which could greatly prolong the membrane service lifetime.Furthermore,this approach was demonstrated as a universal method to modify PVDF membranes with other hydrophilic macromolecular modifiers,including polyethylene glycol,sodium alginate,and polyvinyl pyrrolidone.This modification of the membranes effectively endowed them with good hydrophilicity and antifouling properties,as expected.

Influence of subsequent curing on water sorptivity and pore structure of steam-cured concrete

Steam-cured condition is found to cause larger porosity and worse properties of concrete compared with normal curing condition. For the sake of seeking effective measurements to eliminate this bad effect of steam-cured condition on concrete, the water sorptivity and pore structure of steam-cured concretes exposed to different subsequent curing conditions were investigated after steam-curing treatment. The capillary absorption coefficient and porosity of the corresponding concretes were analyzed, and their mechanisms were also discussed. The results indicate that water sorptivity and pore structure of steam-cured concrete are greatly influenced by the curing condition used in subsequent ages. Exposure steam-cured concrete to air condition has an obviously bad effect on its properties and microstructures. Adopting subsequent curing of immersing steam-cured concrete into about 20℃ water after steam curing period can significantly decrease its capillary absorption coefficient and porosity. Steam-cured concrete with 7 d water curing has minimum capillary absorption coefficient and total porosity. Its water sorptivity is decreased by 23% compared with standard curing concrete and the porosity is 9.6% lower. Moreover, the corresponding gradient of water sorptivity and porosity of steam-cured concrete both decrease, thus mictostructure of concrete becomes more homogeneous.

A short-term study of corneal collagen cross-linking with hypo-osmolar riboflavin solution in keratoconic corneas

AIM: To report the 3mo outcomes of collagen crosslinking(CXL) with a hypo-osmolar riboflavin in thin corneas with the thinnest thickness less than 400 μm without epithelium.METHODS: Eight eyes in 6 patients with age 26.2±4.8y were included in the study. All patients underwent CXL using a hypo-osmolar riboflavin solution after its de-epithelization. Best corrected visual acuity, manifest refraction, the thinnest corneal thickness, and endothelial cell density were evaluated before and 3mo after the procedure.RESULTS: The mean thinnest thickness of the cornea was 408.5 ±29.0 μm before treatment and reduced to369.8 ±24.8 μm after the removal of epithelium. With the application of the hypo-osmolar riboflavin solution, the thickness increased to 445.0 ±26.5 μm before CXL and recover to 412.5 ±22.7 μm at 3mo after treatment, P =0.659). Before surgery, the mean K-value of the apex of the keratoconus corneas was 57.6 ±4.0 diopters, and slightly decreased(54.7±4.9 diopters) after surgery(P =0.085). Mean best-corrected visual acuity was 0.55 ±0.23 logarithm of the minimal angle of resolution, and increased to 0.53±0.26 logarithm after surgery(P =0.879).The endothelial cell density was 2706.4 ±201.6 cells/mm2 before treatment, and slightly decreased( 2641. 2 ±218.2 cells/mm2) at last fellow up(P =0.002).CONCLUSION: Corneal collagen cross-linking with a hypo-osmolar riboflavin in thin corneas seems to be a promising treatment. Further study should be done to evaluate the safety and efficiency of CXL in thin corneas for the long-term.

Systematic review and Meta-analysis comparing modified cross-linking and standard cross-linking for progressive keratoconus

AIM：To compare the effectiveness and safety between modified cross-linking（MC）and standard cross-linking（SC）in mild or moderate progressive keratoconus.METHODS：Eligible studies were retrieved from four electronic databases,including CENTRAL,Clinical Trials gov,Pup Med and OVID MEDLINE.We set post-surgical maximum K value（Kmax）as the primary outcome.In addition,uncorrected and corrected distant visual acuity（UDVA and UDVA）,spherical equivalent（SE）,endothelial cell density（ECD）,central cornea thickness（CCT）and depth of demarcation line（DDL）were Meta-analyzed as secondary outcomes.Mean differences for these outcomes were pooled through either a random-effect model or fixed-effect model according to data heterogeneity.RESULTS：Twenty-four comparative studies either on accelerated cross-linking（AC）compared with SC or on transepithelial cross-linking（TC）compared with SC were included and pooled for analysis.The results indicated that MC was significantly inferior to SC at delaying Kmax deterioration[AC vs SC 0.49（95%CI：0.04-0.94,I2=75%,P=0.03）;TC vs SC 1.15（95%CI：0.54-1.75,I2=50%,P=0.0002）].SE decreased significantly for SC when compared to AC[0.62（95%CI：0.38-0.86,I2=22%,P〈0.00001）].DDL of SC was more significantly deeper than that of TC[-133.49（95%CI：-145.94 to-121.04,I2=33%,P〈0.00001）].Other outcomes demonstrated comparable results between MC and SC.CONCLUSION：SC is more favorable at halting the progression of keratoconus,but visual acuity improvement showed comparable results between MCs and SC.

Corneal collagen cross-linking and liposomal amphotericin B combination therapy for fungal keratitis in rabbits

AIM： To observe the therapeutic effect of corneal collagen cross-linking（CXL） in combination with liposomal amphotericin B in fungal corneal ulcers.METHODS： New Zealand rabbits were induced fungal corneal ulcers by scratching and randomly divided into 3groups, i.e. control, treated with CXL, and combined therapy of CXL with 0.25% liposomal amphotericin B（n =5 each）. The corneal lesions were documented with slit-lamp and confocal microscopy on 3, 7, 14, 21 and 28 d after treatment. The corneas were examined with transmission electron microscopy（TEM） at 4wk.RESULTS： A rabbit corneal ulcer model of Fusarium was successfully established. The corneal epithelium defect areas in the two treatment groups were smaller than that in the control group on 3, 7, 14 and 21d（P 〈0.05）. The corneal epithelium defect areas of the combined group was smaller than that of the CXL group（P 〈0.05） on 7 and 14 d, but there were no statistical differences on 3, 21 and 28 d. The corneal epithelium defects of the two treatment groups have been healed by day 21. The corneal epithelium defects of the control group were healed on 28 d. The diameters of the corneal collagen fiber bundles（42.960 ±7.383 nm in the CXL group and 37.040±4.160 nm in the combined group） were thicker than that of the control group（24.900±1.868 nm）,but there was no difference between the two treatment groups. Some corneal collagen fiber bundles were distorted and with irregular arrangement, a large number of fibroblasts could be seen among them but no inflammatory cells in both treatment groups. CONCLUSION： CXL combined with liposomal amphotericin B have beneficial effects on fungal corneal ulcers. The combined therapy could alleviate corneal inflammattions, accelerate corneal repair, and shorten the course of disease.

Application of Polyurethane Curing Barn in Flue-cured Tobacco Production

[ Objective] This study aimed to investigate the curing performance of polyurethane curing barn and reduce the cost of tobacco leaf flue-curing. [ Meth- odl The temperature control effect, curing effect and curing cost of polyurethane curing barn and traditional bulk curing barn were analyzed and compared. [ Re- suit] The results showed that there were no significant differences in curing performance between two types of curing barns. Horizontal temperature differences in- creased slightly as the temperature rose. Specifically, horizontal temperature differences between each layer ranged from 0.2 ~C to 0.5 ~. Both two types of curing barns exhibited uniform air distribution. Polyurethane curing barn exhibited stable vertical temperature differences. Both two types of curing barns presented good curing effects with slight differences. Polyurethane curing barn exhibited higher economic benefits, lower coal cost, lower electricity cost, lower labor cost and lon- ger service life than traditional bulk curing barn, but its construction cost was higher. [ Conclusion] Polyurethane curing barn exhibits better curing performance with ~ood application prospects.

Construction of all-organic low dielectric polyimide hybrids via synergistic effect between covalent organic framework and cross-linking structure

Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.

Comparison of corneal biological parameters between transepithelial and epithelium-off corneal cross-linking in keratoconus

AIM:To evaluate the differences in corneal biological parameters between transepithelial and epithelium-off corneal cross-linking in keratoconus.METHODS:In our prospective clinical trial,40 patients(60 eyes)with progressive keratoconus were randomized to undergo corneal cross-linking with transepithelial(TE group,n=30)or epithelium-off(EO group,n=30)keratoconus.Examinations comprised topography,corneal biomechanical analysis and specular microscopy at 6 mo postoperatively.RESULTS:The keratometer values were not significantly different between the TE and EO corneal cross-linked groups in different periods(each P>0.05).The corneal thickness of the EO group was greater than that of the TE group at 1 wk after the operation(each P<0.05).Regarding corneal biomechanical responses,the EO group showed a longer second applanation length than TE group(P=0.003).Regarding the corneal endothelial function,standard deviation of the endothelial cell size,and coefficient of variation in the cell area,the values of EO group were larger than those of TE group at 1 wk(P=0.011,0.026),and the percentage of hexagonal cells in EO group was lower than that in TE group at 1 and 6 mo(P=0.018,0.019).CONCLUSION:Epithelium-off corneal cross-linking may strengthen corneal biomechanics better than TE procedure can.However,the TE procedure with a lower ultraviolet-A irradiation intensity would be safer for corneal endothelial function.

A Facile Route for the Large Scale Fabrication of Graphene Oxide Papers and Their Mechanical Enhancement by Cross-linking with Glutaraldehyde

A facile route for the large scale production of graphene oxide(GO) papers and their mechanical enhancement has been presented in this work. The novel paper-like GO made from individual GO sheets in aqueous suspension can be achieved in large scale by a simple drop casting method on hydrophobic substrates.Significant enhancement in mechanical stiffness(341%) and fracture strength(234%) of GO paper have been achieved upon modification with a small amount(less than 10 wt%) of glutaraldehyde(GA). The cross-linking reaction takes place between hydroxyl groups on the surface of GO and aldehyde groups of GA, through forming hemiacetal structure, which can result in distinct mechanical enhancement of the GO papers.

fFabrication of three-dimensional proteinaceous micro- and nano-structures by femtosecond laser cross-linking

Proteins are a class of biomaterials having a vast array of functions, including the catalysis of metabolic reactions, DNA replication, stimuli response and transportation of molecules. Recent progress in laser-based fabrication technologies has enabled the formation of three-dimensional （3D） proteinaceous micro- and nano-structures by femtosecond laser cross-linking, which has expanded the possible applications of proteins. This article reviews the current knowledge andrecent advancements in the femtosecond laser cross-linking of proteins. An overview of previous studies related to fabri-cation using a variety of proteins and detailed discussions of the associated mechanisms are provided. In addition, ad-vances and applications utilizing specific protein functions are introduced. This review thus provides a valuable summaryof the 3D micro- and nano-fabrication of proteins for biological and medical applications.