[Objectives]This study was conducted to compare the effects of different curing processes on the characteristics of marinated beef.[Methods]Marinated beef was obtained by two curing processes:static curing and injecti...[Objectives]This study was conducted to compare the effects of different curing processes on the characteristics of marinated beef.[Methods]Marinated beef was obtained by two curing processes:static curing and injection and vacuum tumbling curing.The effects of the two curing processes on the production rate,curing absorption rate,water content,soluble protein content,amino acid nitrogen content,texture characteristics and microstructure of the product were compared.[Results]Compared with static curing,the production rate of marinated beef increased by 10%,the curing absorption rate increased by 28%,the texture and microstructure were improved,and the water content increased,while the soluble protein content decreased.As a result,the sensory score was higher.There was no significant difference in the content of amino acid nitrogen,but it decreased compared with raw meat.To sum up,injection and vacuum tumbling curing is more conducive to the processing of marinated beef.[Conclusions]This study provides a theoretical basis for the industrial production of marinated beef,and lays a foundation for in-depth exploration of injection and vacuum tumbling curing technique of marinated beef.展开更多
A new hot mixed epoxy asphalt system was developed. The reaction process of epoxy resin was characterized by Fourier transform infrared spectroscopy (FTIR). The viscosity was investigated by Brinell viscometer when ep...A new hot mixed epoxy asphalt system was developed. The reaction process of epoxy resin was characterized by Fourier transform infrared spectroscopy (FTIR). The viscosity was investigated by Brinell viscometer when epoxy resin was mixed with asphalt. The glass transition temperature (Tg), homogeneity, thermal stability and viscoelasticity of epoxy asphalt were analyzed by differential scanning calorimetry (DSC), metallographic microscope, thermogravimetric (TG) and dynamic mechanical analysis (DMA). The results showed that the viscosity of epoxy resin modified asphalt reached 1000 mPa·s for more than 180 minutes at 180 ℃, while the best construction process is mixing at 180 ℃ for 2 hours and curing at 60 ℃ for 4 days. The particle size of asphalt is less than 50 μm. In addition, the mechanical properties of the materials are uniform within the specified pavement thickness.展开更多
The curing process of rubber fender was investigated. A parabola model was put forward for the first time, which described variation of rubber thermal properties such as heat conduction and specific heat. Based on Kam...The curing process of rubber fender was investigated. A parabola model was put forward for the first time, which described variation of rubber thermal properties such as heat conduction and specific heat. Based on Kamal and Sourour model, a modified Rafei kinetic model was used to predict the rubber curing kinetics. To compare with experimental data, the fender curing process was simulated by parabola model and linear model respectively. Additionally, the curing craft and structure of the fender were modified and evaluated based on finite element analysis (FEA). As a result, the curing uniformity and efficiency of the fender was highly improved. It was investigated that, the parabola model correlated the rubber thermal behavior more precisely. The numerical prediction was in good agreement with the experimental evaluation.展开更多
Analytical simulation and corresponding proof-test are adopted to study the principle of the curing process of photopolymer resin diamond tools. The influence of the diamond as abrasives in photopolymer resin owing to...Analytical simulation and corresponding proof-test are adopted to study the principle of the curing process of photopolymer resin diamond tools. The influence of the diamond as abrasives in photopolymer resin owing to the absorptivity of the diamond for the UV light on the photopolymer resin curing process is discussed. Based on the above, a kind of diamond tool—dicing blade is selected to analyze the curing process of photopolymer bond diamond tools. An analytical model of curing process is developed and a correlation curve between the depth of polymerization of the photopolymer resin diamond tools and the exposure time to represent the curing process of photopolymer bond dicing blade. A test is done to proof-test the validity of the analytical model and the correlation curve. The simulated data fit the experimental results, which demonstrates the analytical models and numerical algorithm are of high reliability. The analytical simulation method could possibly be used to optimize the curing cycle and improve the quality of the photopolymers resin bond diamond tools.展开更多
Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples posses...Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature (Tg) and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.展开更多
In this investigation,a new silicone rubber-based MRE material was prepared to be used as a forming medium in manufacturing thin-walled complexshaped Ni-based tubes through the bulging process.Thus,it is significant ...In this investigation,a new silicone rubber-based MRE material was prepared to be used as a forming medium in manufacturing thin-walled complexshaped Ni-based tubes through the bulging process.Thus,it is significant to investigate the effect of magnetic field intensity,magnetic field loading time,and angle on the mechanical properties of the prepared MRE material during the curing process.The obtained results showed that increasing the magnetic field intensity during the curing process can improve the orientation of the chain structure in the elastomer matrix effectively.However,its mechanical properties are the best under the corresponding magnetic field intensity of 321 mT.Besides,by extending the magnetic field loading time in the curing process,the orientation of the chain structure was optimized,at the same time,the mechanical properties were also improved,and the best loading time is about 20–25 min.By changing the loading angle of the magnetic field during the curing process,the mechanical properties of the MRE were improved.When the loading angle of the magnetic field is 90°,the elastomer showed the best compression mechanical properties and excellent compression reversibility.Besides,for the anisotropic MRE material,the performance with magnetic compression is always better than that without magnetic compression.展开更多
By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocya...By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.展开更多
To study the curing mechanism of alkaline phenolic resin with organic ester, three esters were chosen to react with three systems — alkaline phenolic resin, potassium hydroxide aqueous solution containing phenol, and...To study the curing mechanism of alkaline phenolic resin with organic ester, three esters were chosen to react with three systems — alkaline phenolic resin, potassium hydroxide aqueous solution containing phenol, and potassium hydroxide aqueous solution. The variations of pH, heat release and gel pH during the reactions were monitored and measured. Infrared spectroscopy(IR) and thermal gravity analysis(TG) techniques were used to characterize the curing reaction. It was found that organic ester is only partially hydrolyzed and resin can be cured through organic ester hydrolysis process as well as the reaction with redundant organic ester. The sequential curing mechanism of alkaline phenolic resin cured by organic ester was identified as follows: a portion of organic ester is firstly hydrolyzed owing to the effect of the strong alkaline; the gel is then formed after the pH decreases to about 10.8-10.88, meanwhile, the redundant organic ester(i.e. non-hydrolysis ester) starts the curing reaction with the resin. It has also been found that the curing rate depends on the hydrolysis velocity of organic ester. The faster the hydrolysis speed of the ester, the faster the curing rate of the resin.展开更多
With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely an...With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.展开更多
文摘[Objectives]This study was conducted to compare the effects of different curing processes on the characteristics of marinated beef.[Methods]Marinated beef was obtained by two curing processes:static curing and injection and vacuum tumbling curing.The effects of the two curing processes on the production rate,curing absorption rate,water content,soluble protein content,amino acid nitrogen content,texture characteristics and microstructure of the product were compared.[Results]Compared with static curing,the production rate of marinated beef increased by 10%,the curing absorption rate increased by 28%,the texture and microstructure were improved,and the water content increased,while the soluble protein content decreased.As a result,the sensory score was higher.There was no significant difference in the content of amino acid nitrogen,but it decreased compared with raw meat.To sum up,injection and vacuum tumbling curing is more conducive to the processing of marinated beef.[Conclusions]This study provides a theoretical basis for the industrial production of marinated beef,and lays a foundation for in-depth exploration of injection and vacuum tumbling curing technique of marinated beef.
基金Funded by the Fundamental Research Funds for the Central Universities (No.195201039)National Science Foundation of China (Nos.51472189 and 51373129)
文摘A new hot mixed epoxy asphalt system was developed. The reaction process of epoxy resin was characterized by Fourier transform infrared spectroscopy (FTIR). The viscosity was investigated by Brinell viscometer when epoxy resin was mixed with asphalt. The glass transition temperature (Tg), homogeneity, thermal stability and viscoelasticity of epoxy asphalt were analyzed by differential scanning calorimetry (DSC), metallographic microscope, thermogravimetric (TG) and dynamic mechanical analysis (DMA). The results showed that the viscosity of epoxy resin modified asphalt reached 1000 mPa·s for more than 180 minutes at 180 ℃, while the best construction process is mixing at 180 ℃ for 2 hours and curing at 60 ℃ for 4 days. The particle size of asphalt is less than 50 μm. In addition, the mechanical properties of the materials are uniform within the specified pavement thickness.
基金Funded by the National Natural Science Foundation of China(No. 51005108)Natural Science Research Project of Jiangsu Province Colleges and Universities(No.12KJB430006)Graduate Students' Scientific Research Innovation Project of Jiangsu Province Ordinary University (No.CXZZ12_0666)
文摘The curing process of rubber fender was investigated. A parabola model was put forward for the first time, which described variation of rubber thermal properties such as heat conduction and specific heat. Based on Kamal and Sourour model, a modified Rafei kinetic model was used to predict the rubber curing kinetics. To compare with experimental data, the fender curing process was simulated by parabola model and linear model respectively. Additionally, the curing craft and structure of the fender were modified and evaluated based on finite element analysis (FEA). As a result, the curing uniformity and efficiency of the fender was highly improved. It was investigated that, the parabola model correlated the rubber thermal behavior more precisely. The numerical prediction was in good agreement with the experimental evaluation.
基金This project is supported by National Natural Science Foundation of China (No. 50075084)Advanced Manufacturing Technology & Equipment Zhejiang Provincial Key Disciplines, China.
文摘Analytical simulation and corresponding proof-test are adopted to study the principle of the curing process of photopolymer resin diamond tools. The influence of the diamond as abrasives in photopolymer resin owing to the absorptivity of the diamond for the UV light on the photopolymer resin curing process is discussed. Based on the above, a kind of diamond tool—dicing blade is selected to analyze the curing process of photopolymer bond diamond tools. An analytical model of curing process is developed and a correlation curve between the depth of polymerization of the photopolymer resin diamond tools and the exposure time to represent the curing process of photopolymer bond dicing blade. A test is done to proof-test the validity of the analytical model and the correlation curve. The simulated data fit the experimental results, which demonstrates the analytical models and numerical algorithm are of high reliability. The analytical simulation method could possibly be used to optimize the curing cycle and improve the quality of the photopolymers resin bond diamond tools.
基金This work was financially supported by the National Natural Science Foundation of China(No.20104008).
文摘Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature (Tg) and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.
基金The funding for the investigation in this paper mainly comes from the following funds.Funded by the National Natural Science Foundation Key Project of China(Grant No.U1937206)the authors are Li,Xu,Guo,the specific grant numbers was RMB 100,000.Funded by the Jiangsu Province Key Research and Development Project(No.BE2019007-2)+2 种基金the authors are Abd,Cheng,the specific grant numbers was RMB 200,000.Funded by the Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology(No.ASMA201903)the authors are Wu,Yang,Hu,the specific grant numbers was RMB 50,000.Funded by the Basic Scientific Research Operations(Approval No.NT2020015)the authors are Shen,Tao,Guo,the specific grant numbers was RMB 100,000.
文摘In this investigation,a new silicone rubber-based MRE material was prepared to be used as a forming medium in manufacturing thin-walled complexshaped Ni-based tubes through the bulging process.Thus,it is significant to investigate the effect of magnetic field intensity,magnetic field loading time,and angle on the mechanical properties of the prepared MRE material during the curing process.The obtained results showed that increasing the magnetic field intensity during the curing process can improve the orientation of the chain structure in the elastomer matrix effectively.However,its mechanical properties are the best under the corresponding magnetic field intensity of 321 mT.Besides,by extending the magnetic field loading time in the curing process,the orientation of the chain structure was optimized,at the same time,the mechanical properties were also improved,and the best loading time is about 20–25 min.By changing the loading angle of the magnetic field during the curing process,the mechanical properties of the MRE were improved.When the loading angle of the magnetic field is 90°,the elastomer showed the best compression mechanical properties and excellent compression reversibility.Besides,for the anisotropic MRE material,the performance with magnetic compression is always better than that without magnetic compression.
文摘By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.
文摘To study the curing mechanism of alkaline phenolic resin with organic ester, three esters were chosen to react with three systems — alkaline phenolic resin, potassium hydroxide aqueous solution containing phenol, and potassium hydroxide aqueous solution. The variations of pH, heat release and gel pH during the reactions were monitored and measured. Infrared spectroscopy(IR) and thermal gravity analysis(TG) techniques were used to characterize the curing reaction. It was found that organic ester is only partially hydrolyzed and resin can be cured through organic ester hydrolysis process as well as the reaction with redundant organic ester. The sequential curing mechanism of alkaline phenolic resin cured by organic ester was identified as follows: a portion of organic ester is firstly hydrolyzed owing to the effect of the strong alkaline; the gel is then formed after the pH decreases to about 10.8-10.88, meanwhile, the redundant organic ester(i.e. non-hydrolysis ester) starts the curing reaction with the resin. It has also been found that the curing rate depends on the hydrolysis velocity of organic ester. The faster the hydrolysis speed of the ester, the faster the curing rate of the resin.
文摘With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.