Based on the analysis of the basic principle of slope compensation, a high-precision adaptive slope compensation circuit for peak current mode boost DC/DC converter is designed. The circuit dynamically detects the inp...Based on the analysis of the basic principle of slope compensation, a high-precision adaptive slope compensation circuit for peak current mode boost DC/DC converter is designed. The circuit dynamically detects the input and output voltage of the boost circuit to realize automatic adjustment of the compensation amount with the change of duty ratio, which makes the ramp compensation slope optimized. The design uses a high-precision subtracter to improve the accuracy of slope compensation. While eliminating sub-slope oscillation and improving the stability of boost circuit, the negative impact of compensation on boost circuit is minimized, and the load capacity and transient response speed of boost circuit are guaranteed. The circuit is designed based on SMIC 0.18um CMOS technology, with simple structure, high reliability and easy engineering implementation. Spectre circuit simulator 17.1.0.124 64b simulation results show that the circuit has high compensation accuracy and wide input and output voltage range. When the working voltage is 3.3 V, the compensation slope can be adjusted adaptively under different duty cycles, and the minimum error between the compensation slope and the theoretical optimal compensation slope is only 0.42%.展开更多
By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is su...By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.展开更多
By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric...By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric ternary current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process bidirectional signals.展开更多
An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configu...An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configuration employs two VDTAs along with grounded capacitors and offers the following advantageous features 1) fully and electronically independent control of condition of oscillation (CO) and frequency of oscillation (FO);2) explicit current-mode quadrature oscillations;and 3) low active and passive sensitivities. The workability of proposed configuration has been demonstrated by PSPICE simulations with TSMC CMOS 0.18 μm process parameters.展开更多
A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, ...A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.展开更多
A switched-current sample-and-hold circuit with low charge injection was proposed. To obtain low noise and charge injection, the zero-voltage switching was used to remove the signal-dependent charge injection, and the...A switched-current sample-and-hold circuit with low charge injection was proposed. To obtain low noise and charge injection, the zero-voltage switching was used to remove the signal-dependent charge injection, and the signal-independent charge injection was reduced by removing the feed-through voltage from the input port of the memory transistor directly. This current sample-and-hold circuit was implemented using CMOS 180 nm 1.8 V technology. For a 0.8 MHz sinusoidal signal input, the simulated signal-to-noise and distortion ratio and total harmonic distortion were improved from 53.74 dB and -51.24 dB to 56.53 dB and -54.36 dB at the sampling rate of 20 MHz respectively, with accuracy of 9.01 bit and power consumption of 0.44 mW.展开更多
A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer ...A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.展开更多
Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. S...Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. Simulation results are included to confirm the theoretical analysis based upon CMOS OTAs implementable in 0.5 μm technology.展开更多
A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filt...A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.展开更多
A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive g...A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.展开更多
A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and...A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and high pass filter characteristics by choosing the suitable current output branches. The filter performance factors natural frequency (ω0), bandwidth , quality factor Q and transconductance gain gm are electronically tunable. The proposed circuit has very low sensitivities with respect to circuit active elements. From sensitivity analysis, it has been clearly shown that the proposed circuit has very low sensitivities with respect to the circuit active elements. The gain roll-off of high pass and low pass configuration is 18 dB/oc- tave. The proposed circuit facilitates integrability, programmability and ease of implementation.展开更多
Approximation techniques are useful for implementing pattern recognizers, communication decoders and sensory processing algorithms where computational precision is not critical to achieve the desired system level perf...Approximation techniques are useful for implementing pattern recognizers, communication decoders and sensory processing algorithms where computational precision is not critical to achieve the desired system level performance. In our previous work, we had proposed margin propagation (MP) as an efficient piece-wise linear (PWL) approximation technique to a log-sum-exp function and had demonstrated its advantages for implementing probabilistic decoders. In this paper, we present a systematic and a generalized approach for synthesizing analog piecewise-linear (PWL) computing circuits using the MP principle. MP circuits use only addition, subtraction and threshold operations and hence can be implemented using universal conservation principles like the Kirchoff's current law. Thus, unlike the conventional translinear CMOS current-mode circuits, the operation of the MP circuits are functionally similar in weak, moderate and strong inversion regimes of the MOS transistor making the design approach bias-scalable. This paper presents measured results from MP circuits prototyped in a 0.5μm standard CMOS process verifying the bias-scalable property. As an example, we apply the synthesis approach towards designing linear classifiers and verify its performance using measured results.展开更多
文摘Based on the analysis of the basic principle of slope compensation, a high-precision adaptive slope compensation circuit for peak current mode boost DC/DC converter is designed. The circuit dynamically detects the input and output voltage of the boost circuit to realize automatic adjustment of the compensation amount with the change of duty ratio, which makes the ramp compensation slope optimized. The design uses a high-precision subtracter to improve the accuracy of slope compensation. While eliminating sub-slope oscillation and improving the stability of boost circuit, the negative impact of compensation on boost circuit is minimized, and the load capacity and transient response speed of boost circuit are guaranteed. The circuit is designed based on SMIC 0.18um CMOS technology, with simple structure, high reliability and easy engineering implementation. Spectre circuit simulator 17.1.0.124 64b simulation results show that the circuit has high compensation accuracy and wide input and output voltage range. When the working voltage is 3.3 V, the compensation slope can be adjusted adaptively under different duty cycles, and the minimum error between the compensation slope and the theoretical optimal compensation slope is only 0.42%.
基金Supported by National Natural Science Foundation of China
文摘By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.
基金National Natural Science Foundation of ChinaNatural science Foundation of Zhejiang Province
文摘By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric ternary current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process bidirectional signals.
文摘An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configuration employs two VDTAs along with grounded capacitors and offers the following advantageous features 1) fully and electronically independent control of condition of oscillation (CO) and frequency of oscillation (FO);2) explicit current-mode quadrature oscillations;and 3) low active and passive sensitivities. The workability of proposed configuration has been demonstrated by PSPICE simulations with TSMC CMOS 0.18 μm process parameters.
文摘A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.
基金Supported by National Natural Science Foundation of China(No.61036004 and No.61076024)
文摘A switched-current sample-and-hold circuit with low charge injection was proposed. To obtain low noise and charge injection, the zero-voltage switching was used to remove the signal-dependent charge injection, and the signal-independent charge injection was reduced by removing the feed-through voltage from the input port of the memory transistor directly. This current sample-and-hold circuit was implemented using CMOS 180 nm 1.8 V technology. For a 0.8 MHz sinusoidal signal input, the simulated signal-to-noise and distortion ratio and total harmonic distortion were improved from 53.74 dB and -51.24 dB to 56.53 dB and -54.36 dB at the sampling rate of 20 MHz respectively, with accuracy of 9.01 bit and power consumption of 0.44 mW.
文摘A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.
文摘Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. Simulation results are included to confirm the theoretical analysis based upon CMOS OTAs implementable in 0.5 μm technology.
文摘A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.
文摘A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.
文摘A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and high pass filter characteristics by choosing the suitable current output branches. The filter performance factors natural frequency (ω0), bandwidth , quality factor Q and transconductance gain gm are electronically tunable. The proposed circuit has very low sensitivities with respect to circuit active elements. From sensitivity analysis, it has been clearly shown that the proposed circuit has very low sensitivities with respect to the circuit active elements. The gain roll-off of high pass and low pass configuration is 18 dB/oc- tave. The proposed circuit facilitates integrability, programmability and ease of implementation.
基金Supported by a Research Grant from The National Science Foundation(CCF:0728996)
文摘Approximation techniques are useful for implementing pattern recognizers, communication decoders and sensory processing algorithms where computational precision is not critical to achieve the desired system level performance. In our previous work, we had proposed margin propagation (MP) as an efficient piece-wise linear (PWL) approximation technique to a log-sum-exp function and had demonstrated its advantages for implementing probabilistic decoders. In this paper, we present a systematic and a generalized approach for synthesizing analog piecewise-linear (PWL) computing circuits using the MP principle. MP circuits use only addition, subtraction and threshold operations and hence can be implemented using universal conservation principles like the Kirchoff's current law. Thus, unlike the conventional translinear CMOS current-mode circuits, the operation of the MP circuits are functionally similar in weak, moderate and strong inversion regimes of the MOS transistor making the design approach bias-scalable. This paper presents measured results from MP circuits prototyped in a 0.5μm standard CMOS process verifying the bias-scalable property. As an example, we apply the synthesis approach towards designing linear classifiers and verify its performance using measured results.
