CURRENT MODE CIRCUIT SYMBOLIC ANALYSIS WITH MATH-EMATICA

A practical method of current mode circuit symbolic analysis using Mathematica is proposed. With the powerful symbolic manipulation capacity of Mathematica, current mode circuit symbolic analysis can be significantly simplified. The active devices are modelled by nullors. The examples of current mode filters using CCIIs are presented.

An Adaptive Slope Compensation Circuit for Peak Current Mode of Boost Switching Power Supply

Based on the analysis of the basic principle of slope compensation, a high-precision adaptive slope compensation circuit for peak current mode boost DC/DC converter is designed. The circuit dynamically detects the input and output voltage of the boost circuit to realize automatic adjustment of the compensation amount with the change of duty ratio, which makes the ramp compensation slope optimized. The design uses a high-precision subtracter to improve the accuracy of slope compensation. While eliminating sub-slope oscillation and improving the stability of boost circuit, the negative impact of compensation on boost circuit is minimized, and the load capacity and transient response speed of boost circuit are guaranteed. The circuit is designed based on SMIC 0.18um CMOS technology, with simple structure, high reliability and easy engineering implementation. Spectre circuit simulator 17.1.0.124 64b simulation results show that the circuit has high compensation accuracy and wide input and output voltage range. When the working voltage is 3.3 V, the compensation slope can be adjusted adaptively under different duty cycles, and the minimum error between the compensation slope and the theoretical optimal compensation slope is only 0.42%.

DESIGN OF TERNARY CURRENT-MODE CMOS CIRCUITS BASED ON SWITCH-SIGNAL THEORY

By applying switch-signal theory, the interaction between MOS transmission switch-ing transistor and current signal in current-mode CMOS circuits is analyzed, and the theory oftransmission current-switches which is suitable to current-mode CMOS circuits is proposed. Thecircuits, such as ternary full-adder etc., designed by using this theory have simpler circuit struc-tures and correct logic functions. It is confirmed that this theory is efficient in guiding the logicdesign of current-mode CMOS circuits at switch level.

DESIGN OF SYMMETRIC TERNARY CURRENT-MODE CMOS CIRCUITS

By applying switch-signal theory, the theory of transmission current-switches based on symmetric ternary logic is proposed, this theory is suitable to design symmetric ternary current-mode CMOS circuits. The symmetric ternary current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process bidirectional signals.

A State Variable Method for the Realization of Universal Current-Mode Biquads

A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.

Electronically Controllable Fully-Uncoupled Explicit Current-Mode Quadrature Oscillator Using VDTAs and Grounded Capacitors

An electronically controllable fully uncoupled explicit current-mode quadrature oscillator employing Voltage Differencing Transconductance Amplifiers (VDTAs) as active elements has been presented. The proposed configuration employs two VDTAs along with grounded capacitors and offers the following advantageous features 1) fully and electronically independent control of condition of oscillation (CO) and frequency of oscillation (FO);2) explicit current-mode quadrature oscillations;and 3) low active and passive sensitivities. The workability of proposed configuration has been demonstrated by PSPICE simulations with TSMC CMOS 0.18 μm process parameters.

A VERSATILE CURRENT-MODE BIQUAD USING OPERATIONAL AMPLIFIERS

A versatile current-mode biquadratic filter using three operational amplifiers and nine passive elements is proposed. By suitably choosing the output branch, lowpass, bandpass, highpass, bandstop and allpass transfer functions are realized simultaneously without changing the circuit configuration and elements. Two circuits, one is for low frequency application and the other for high frequency, are proposed. The center frequency, quality factor and gain constants of the circuit can be tuned independently. Simulated results show that the circuits work successfully.

Electronically-Controlled Current-mode second order Sinusoidal Oscillators Using MO-OTAs and Grounded Capacitors

Five new electronically-controllable second order current-mode sinusoidal oscillators using three mul-ti-output operational transconductance amplifiers (MO-OTAs) and two grounded capacitors (GC) have been presented. Simulation results are included to confirm the theoretical analysis based upon CMOS OTAs implementable in 0.5 μm technology.

Realization of a New Current Mode Second-Order Biquad Using Two Current Follower Transconductance Amplifiers (CFTAs)

A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.

Universal Current-Mode Biquad Employing Dual Output Current Conveyors and MO-CCCA with Grounded Passive Elements

A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.

Instantaneous Current Feedback Control Strategy on Buck Mode Inverter

Buck型逆变器的电感电流瞬时值反馈控制和电容电流瞬时值反馈控制存在本质区别。以差动正激直流斩波器型高频环节逆变器为例，采用理论推导方法，研究这两种电流控制逆变器的稳定性、输出外特性、短路能力、输出功率特性、带非线性负载能力及动态响应特性。研究结果表明，电感电流瞬时值反馈控制逆变器具有电感电流和输出功率受限、较强的过载和短路能力、较软的输出外特性、较弱的带非线性负载能力、较差的动态响应等特点；而电容电流瞬时值反馈控制逆变器具有电感电流和输出功率不受限、较弱的过载能力、无短路能力、硬的输出外特性、较强的带非线性负载能力、较好的动态响应等特点。研究成果为Buck型逆变器电流型控制策略的选择及其设计提供重要的理论依据。

Dual DVCC Based Voltage-Mode Digitally Programmable Biquadratic Filter

The recent advances in IC technology have led to the trend of designing hybrid systems to benefit both analog and the digital domain. Among analog circuits, multifunctional filter along with multiphase oscillator constitutes a building block of critical importance. In this paper, a digitally reconfigurable multi-input-multi-output voltage mode multifunctional biquadratic filter has been presented. The circuit comprises of two differential voltage current conveyors (DVCCs), two grounded capacitors and two floating resistors. The digital controllability is incorporated using a current-summing network (CSN). Tunability of quality factor is achieved by the use of a 3-bit digital control word while keeping the resonant frequency constant. PSPICE simulations using TSMC 0.25 μm CMOS technology have been performed to validate the theoretically predicted results.

Nano-scale Bias-scalable CMOS Analog Computational Circuits Using Margin Propagation

Approximation techniques are useful for implementing pattern recognizers, communication decoders and sensory processing algorithms where computational precision is not critical to achieve the desired system level performance. In our previous work, we had proposed margin propagation (MP) as an efficient piece-wise linear (PWL) approximation technique to a log-sum-exp function and had demonstrated its advantages for implementing probabilistic decoders. In this paper, we present a systematic and a generalized approach for synthesizing analog piecewise-linear (PWL) computing circuits using the MP principle. MP circuits use only addition, subtraction and threshold operations and hence can be implemented using universal conservation principles like the Kirchoff's current law. Thus, unlike the conventional translinear CMOS current-mode circuits, the operation of the MP circuits are functionally similar in weak, moderate and strong inversion regimes of the MOS transistor making the design approach bias-scalable. This paper presents measured results from MP circuits prototyped in a 0.5μm standard CMOS process verifying the bias-scalable property. As an example, we apply the synthesis approach towards designing linear classifiers and verify its performance using measured results.

Third Order Current Mode Universal Filter Using Only Op.amp. and OTAs

A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and high pass filter characteristics by choosing the suitable current output branches. The filter performance factors natural frequency (ω0), bandwidth , quality factor Q and transconductance gain gm are electronically tunable. The proposed circuit has very low sensitivities with respect to circuit active elements. From sensitivity analysis, it has been clearly shown that the proposed circuit has very low sensitivities with respect to the circuit active elements. The gain roll-off of high pass and low pass configuration is 18 dB/oc- tave. The proposed circuit facilitates integrability, programmability and ease of implementation.

Two Simple Analog Multiplier Based Linear VCOs Using a Single Current Feedback Op-Amp

Two simple voltage-controlled-oscillators (VCO) with linear tuning laws employing only a single current feedback operational amplifier (CFOA) in conjunction with two analog multipliers (AM) have been highlighted. The workability of the presented VCOs has been demonstrated by experimental results based upon AD844 type CFOAs and AD534 type AMs.

Low-Power MCML Circuit with Sleep-Transistor

This paper proposes a low-power MOS current mode logic （MCML） circuit with sleep-transistor to reduce the leakage current. The sleep-transistor is used to high-threshold voltage transistor to minimize the leakage current. The 16× 16 bit parallel multiplier is designed with the proposed technology. Comparing with the previous MCML circuit, the circuit achieves the reduction of the power consumption in sleep mode by 1/258. This circuit is designed with Samsung 0.35 um complementary metal oxide semiconductor （CMOS） process. The validity and effectiveness are verified through the HSPICE simulation.

High-Bandwidth,Low-Power CMOS Transistor Based CAB for Field Programmable Analog Array

This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.

基于反激变换器的电池充电系统设计

以具有结构简单、电气隔离等优点的反激变换器为电池充电电源,分析反激变换器电路的连续和断续模式工作原理,通过设计电压电流双闭环控制方法,实现电池的恒流充电模式和恒电压充电模式,也可实现两种充电模式的切换。实验结果证明了反激变换器的连续工作模式和断续工作模式的正确性,验证了应用于电池充电电源的可行性和有效性,切换时间小于1 ms,电压波动小于1 V。

集成于电流模降压型DC-DC变换器的电流采样电路

针对电流模降压型DC-DC变换器,提出了一种新颖的CMOS片上电流采样电路.该电路结构简单,易于集成,功率损耗小,且通过MOSFET的匹配使采样比例几乎不受温度、模型以及电源电压变化影响.并通过进一步的优化设计,使得响应速度更快,工作电压进一步降低.提出的采样电路在一款基于0.5μm CMOS工艺设计的单片电流模降压型DC-DC变换器中进行了验证.在2.5~5.5V的电压范围,0~2A的负载范围内芯片工作稳定,瞬态响应良好,且效率高达96%.

一种基于MOCCCII和CCII-实现的n阶低通滤波器

提出了用信号流图法设计n阶基于多端输出的电流控制第二代电流传输器(current controlled sec-ond generation current conveyor with multiple outputs,简记为MOCCCII)和第二代电流传输器(the second genera-tion current conveyor,简称CCII)电流模式低通滤波器的方法.由该方法导出的滤波器所需元件较少,n阶滤波器仅需1个CCII-、n个MOCCCII和n个电容,所有电容均接地,便于集成且与VLSI工艺兼容.该滤波器可用于通信、电子测量与仪器仪表的信号处理.该文给出了2、3和4阶滤波器的设计实例,PSPISE仿真结果与理论分析相吻合,验证了该方法的可行性.