1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedan...1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and展开更多
In this paper, we present a new voltage-mode biquad filter that uses a six-terminal CMOS fully differential current conveyor(FDCCII). The FDCCII with only 23 transistors in its structure and operating at ± 1.5 V,...In this paper, we present a new voltage-mode biquad filter that uses a six-terminal CMOS fully differential current conveyor(FDCCII). The FDCCII with only 23 transistors in its structure and operating at ± 1.5 V, is based on a class AB fully differential buffer. The proposed filter has the facility to tune gain, ωo and Q. A circuit division circuit(CDC) is employed to digitally control the FDCCII block. This digitally controlled FDCCII is used to realize a new reconfigurable fully-differential integrator and differentiator. We performed SPICE simulations to determine the performance of all circuits using CMOS 0.25 μm technology.展开更多
In the field of analog VLSI design, current conveyors have reasonably established their identity as an important circuit design element. In the literature published during the past few years, numerous application have...In the field of analog VLSI design, current conveyors have reasonably established their identity as an important circuit design element. In the literature published during the past few years, numerous application have been reported which are based on a variety of current conveyors. In this paper, an oscillator circuit has been proposed. This oscillator is designed using a single positive type second generation current controlled current conveyor (CCCII+). A CCCII has parasitic input resistance on it’s current input node. This resistance could be exploited to reduce circuit complexities. Thus in this accord, a novel oscillator circuit is proposed which utilizes the parasitic resistance of the CCCII+ along with a few more passive components.展开更多
A novel four-input three-output voltage-mode differential difference current conveyor (DDCC) based universal filter is presented. The circuit uses three DDCCs as active elements, two resistors and two capacitors as pa...A novel four-input three-output voltage-mode differential difference current conveyor (DDCC) based universal filter is presented. The circuit uses three DDCCs as active elements, two resistors and two capacitors as passive elements. The circuit along with its versatility enjoys the advantage of minimum number of passive elements employment. SPICE simulation results are given to confirm the theoretical analysis. The proposed circuit is a novel addition to the existing knowledge on the subject.展开更多
This paper presents a new current conveyor (CCII+) full-wave rectifier for low frequency/small signal medical applications. The proposed rectifier is based on the current conveyor full-wave rectifier proposed previous...This paper presents a new current conveyor (CCII+) full-wave rectifier for low frequency/small signal medical applications. The proposed rectifier is based on the current conveyor full-wave rectifier proposed previously, but the proposed rectifier is better in view of no need diodes to rectify, and no need bias sources to overcome the zero crossing error. It needs only two CCII+s, two resistors, and three simple current mirrors, which is easy for IC implementation and for building in many countries. The PSPICE simulation with the current conveyor CCII+ in the current feedback opamp AD844 IC and the 2N2222 bipolar current mirror shows the good low frequency/small signal rectification, the operation voltage of down to 6 .展开更多
A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive g...A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.展开更多
This research paper contains a new electronically tunable current-mode biquadratic universal filter using a new active building block;current controlled differential difference current conveyor transconductance amplif...This research paper contains a new electronically tunable current-mode biquadratic universal filter using a new active building block;current controlled differential difference current conveyor transconductance amplifier (CCDDCCTA). The proposed filter provides the following important and desirable features: (i) One can use only one CCDDCCTA and two capacitors;(ii) One can get low pass (LP), band pass (BP), high pass (HP), notch (NF) and all pass (AP) current responses from the same configuration without any alteration;(iii) Passive components are grounded, which ease the integrated circuit implementation;(iv) Responses are electronically tunable;and (v) Sensitivity is low. Moreover, the non-ideality analysis shows that the parasitic passive components can be compensated for the proposed circuit. The functionality of the design is verified through SPICE simulations using 0.25 μm CMOS TSMC technology process parameters. Simulation result agrees well with the theoretical analysis.展开更多
This paper presents a current controlled fully balanced second-generation current conveyor circuit（CF-BCCII）.The proposed circuit has the traits of fully balanced architecture, and its X-Y terminals are current cont...This paper presents a current controlled fully balanced second-generation current conveyor circuit（CF-BCCII）.The proposed circuit has the traits of fully balanced architecture, and its X-Y terminals are current control-lable.Based on the CFBCCII, two biquadratic universal filters are also proposed as its applications.The CFBCCII circuits and the two filters were fabricated with chartered 0.35-μm CMOS technology;with ±1.65 V power supply voltage, the total power consumption of the CFBCCII circuit is 3.6 mW.Comparisons between measured and HSpice simulation results are also given.展开更多
According to the structures and characteristics of the current conveyor circuits, a non inverting current integrator, an inverting current integrator and a multi output follower circuits have been constructed. A...According to the structures and characteristics of the current conveyor circuits, a non inverting current integrator, an inverting current integrator and a multi output follower circuits have been constructed. Applying inter reciprocity network theorem, a method was developed to implement the transform from RLC filter prototype circuits into active RC filter circuits, and finally into current mode filter based on current conveyor. The transfer functions and component sensitivities are common among them. It is effective in the processing of current mode analog signal, which is easy to implement.展开更多
A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable c...A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given.展开更多
This paper introduces a current-mode universal biquad circuit using only plus type CCs(current conveyors)(i.e.DVCCs(differential voltage current conveyors)and CCIIs(second generation current conveyors)).The circuit en...This paper introduces a current-mode universal biquad circuit using only plus type CCs(current conveyors)(i.e.DVCCs(differential voltage current conveyors)and CCIIs(second generation current conveyors)).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and/or addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation responses by PSPICE.展开更多
A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, ...A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.展开更多
A new non-inverting RC active differentiator network base on a current feedback amplifier and using a grounded capacitor is described. Small time constant can be achieved by adjusting a single grounded resistor. Becau...A new non-inverting RC active differentiator network base on a current feedback amplifier and using a grounded capacitor is described. Small time constant can be achieved by adjusting a single grounded resistor. Because the output impedance of the CFA is very low, the output terminal of the proposed circuit can be directly connected to the next stage. Experimental results that confirm theoretical analysis are presented.展开更多
Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second g...Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second generation current conveyors and operational transconduc-tance amplifiers-electric capacity. The characteristics of each circuit were analyzed.展开更多
A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. Th...A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. The suggested filter uses a canonical number of passive components without requiring any component matching condition. The frequency responses simulation results of the proposed filter confirm the theoretical analysis.展开更多
A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filt...A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.展开更多
文摘1. IntroductionA large number of networks for realizing first and second order transfer functions using a currentconveyor have been reported in the literature. Especially, the networks that can offer highinput impedance attract attention, for high input impedance has the advantage that the networksmay be used in cascade without requiring impedance matching device. In the Higashimura and
基金UGC for providing valuable support in form of the NET-JRF grant
文摘In this paper, we present a new voltage-mode biquad filter that uses a six-terminal CMOS fully differential current conveyor(FDCCII). The FDCCII with only 23 transistors in its structure and operating at ± 1.5 V, is based on a class AB fully differential buffer. The proposed filter has the facility to tune gain, ωo and Q. A circuit division circuit(CDC) is employed to digitally control the FDCCII block. This digitally controlled FDCCII is used to realize a new reconfigurable fully-differential integrator and differentiator. We performed SPICE simulations to determine the performance of all circuits using CMOS 0.25 μm technology.
文摘In the field of analog VLSI design, current conveyors have reasonably established their identity as an important circuit design element. In the literature published during the past few years, numerous application have been reported which are based on a variety of current conveyors. In this paper, an oscillator circuit has been proposed. This oscillator is designed using a single positive type second generation current controlled current conveyor (CCCII+). A CCCII has parasitic input resistance on it’s current input node. This resistance could be exploited to reduce circuit complexities. Thus in this accord, a novel oscillator circuit is proposed which utilizes the parasitic resistance of the CCCII+ along with a few more passive components.
文摘A novel four-input three-output voltage-mode differential difference current conveyor (DDCC) based universal filter is presented. The circuit uses three DDCCs as active elements, two resistors and two capacitors as passive elements. The circuit along with its versatility enjoys the advantage of minimum number of passive elements employment. SPICE simulation results are given to confirm the theoretical analysis. The proposed circuit is a novel addition to the existing knowledge on the subject.
文摘This paper presents a new current conveyor (CCII+) full-wave rectifier for low frequency/small signal medical applications. The proposed rectifier is based on the current conveyor full-wave rectifier proposed previously, but the proposed rectifier is better in view of no need diodes to rectify, and no need bias sources to overcome the zero crossing error. It needs only two CCII+s, two resistors, and three simple current mirrors, which is easy for IC implementation and for building in many countries. The PSPICE simulation with the current conveyor CCII+ in the current feedback opamp AD844 IC and the 2N2222 bipolar current mirror shows the good low frequency/small signal rectification, the operation voltage of down to 6 .
文摘A new universal multiple input multiple output (MIMO) type current-mode biquad employing two dual output current conveyors (DOCCII), one multiple output current controlled current amplifier (MOCCCA) and four passive grounded elements is proposed which can realize all the five basic filtering functions namely, low-pass (LP), high-pass (HP), band-pass (BP), band-stop (BR) and all-pass (AP) in current mode from the same configuration. The centre frequency can be set by the passive elements of the circuit and the quality factor Q0 is electronically tunable through bias currents of the MOCCCA. Therefore, the biquad filter has independent tenability for the and Q0. The active and passive sensitivities of Q0 and are low. The workability of the new configuration has been demonstrated by PSPICE simulation results based upon a CMOS CCII in0.35μm technology.
文摘This research paper contains a new electronically tunable current-mode biquadratic universal filter using a new active building block;current controlled differential difference current conveyor transconductance amplifier (CCDDCCTA). The proposed filter provides the following important and desirable features: (i) One can use only one CCDDCCTA and two capacitors;(ii) One can get low pass (LP), band pass (BP), high pass (HP), notch (NF) and all pass (AP) current responses from the same configuration without any alteration;(iii) Passive components are grounded, which ease the integrated circuit implementation;(iv) Responses are electronically tunable;and (v) Sensitivity is low. Moreover, the non-ideality analysis shows that the parasitic passive components can be compensated for the proposed circuit. The functionality of the design is verified through SPICE simulations using 0.25 μm CMOS TSMC technology process parameters. Simulation result agrees well with the theoretical analysis.
基金supported by the National Natural Science Foundation of China(No.60676021)
文摘This paper presents a current controlled fully balanced second-generation current conveyor circuit（CF-BCCII）.The proposed circuit has the traits of fully balanced architecture, and its X-Y terminals are current control-lable.Based on the CFBCCII, two biquadratic universal filters are also proposed as its applications.The CFBCCII circuits and the two filters were fabricated with chartered 0.35-μm CMOS technology;with ±1.65 V power supply voltage, the total power consumption of the CFBCCII circuit is 3.6 mW.Comparisons between measured and HSpice simulation results are also given.
文摘According to the structures and characteristics of the current conveyor circuits, a non inverting current integrator, an inverting current integrator and a multi output follower circuits have been constructed. Applying inter reciprocity network theorem, a method was developed to implement the transform from RLC filter prototype circuits into active RC filter circuits, and finally into current mode filter based on current conveyor. The transfer functions and component sensitivities are common among them. It is effective in the processing of current mode analog signal, which is easy to implement.
文摘A complete state variable current-mode biquadratic filter built by duo-output CCII (DOCCII) with variable current gain is presented. All the coefficients of the filter can be independently tuned through the variable current gain factors of the DOCCII. Based on the principles upon which the general biquadratic filter was constructed, a universal electronically tunable current-mode filter is proposed which implements the low-pass, high-pass, band-pass, band-suppress and all-pass second order transfer functions simultaneously. The PSPICE simulations of frequency responses of second-order filter of are also given.
文摘This paper introduces a current-mode universal biquad circuit using only plus type CCs(current conveyors)(i.e.DVCCs(differential voltage current conveyors)and CCIIs(second generation current conveyors)).The circuit enables LP(low-pass),BP(band-pass),HP(high-pass),BS(band-stop)and AP(all-pass)responses by the selection and/or addition of the input and output currents without any component matching constraints.Moreover the circuit parametersω0 and Q can be set orthogonally adjusting the circuit components.A design example is given together with simulation responses by PSPICE.
文摘A state variable method of converting single-resistance-controlled- oscillators (SRCO), into universal current-mode biquad (offering realizations of all the five standard filter functions namely, low pass, band pass, high pass, notch and all pass) has been highlighted. The workability of the exemplary implementation of the derived current-mode universal biquad has been demonstrated by PSPICE simulation results based upon 0.35 μ m technology. It is expected that the proposed method can be applied to other SRCOs to generate other multifunction filter structures.
文摘A new non-inverting RC active differentiator network base on a current feedback amplifier and using a grounded capacitor is described. Small time constant can be achieved by adjusting a single grounded resistor. Because the output impedance of the CFA is very low, the output terminal of the proposed circuit can be directly connected to the next stage. Experimental results that confirm theoretical analysis are presented.
文摘Basing on the state variable method, a block diagram of the current-mode biquad active circuit was proposed, whose integrators were realized using three kinds of active elements such as operational amplifier, second generation current conveyors and operational transconduc-tance amplifiers-electric capacity. The characteristics of each circuit were analyzed.
文摘A current-mode low input and high output impedances first-order allpass filter using two multiple output second-generation current conveyors (MOCCIIs), one grounded capacitor and one grounded resistor is presented. The suggested filter uses a canonical number of passive components without requiring any component matching condition. The frequency responses simulation results of the proposed filter confirm the theoretical analysis.
文摘A new circuit for realization of universal current-mode filter using current Follower Transconductance Amplifiers (CFTAs) is presented. The proposed circuit realizes current-mode low pass, high pass and band pass filter functions simultaneously with a single current source at the input. The band reject and all pass filters can also be obtained from the proposed circuit without any extra hardware. The proposed circuit employs three passive grounded elements and two CFTAs. Linear electronic control of natural frequency ω0 is available in the proposed circuit. The quality factor can be independently adjusted through grounded resistor. The proposed circuit employs two grounded capacitors and a grounded resistor along with two CFTAs. The grounded resistor can be replaced by an OTA based circuit for linear electronic control of quality factor Q0. The circuit exhibits low active and passive sensitivities for ω0 and Q0. Simulation results are obtained using PSPICE software which is in conformity with the theoretical findings.
