The quasi-conforming element of the curved beam and shallow curved beam is given in this paper. Numerical examples illustrate that the quasi-conforming elements of the curved beam and shallow curved beam which is used...The quasi-conforming element of the curved beam and shallow curved beam is given in this paper. Numerical examples illustrate that the quasi-conforming elements of the curved beam and shallow curved beam which is used to approximate the curved beam have better accuracy than the straight beam clement. The curved beam element constructed by displacement method can not satisfy rigid body motion condition and the very fine grids have to be used in order to satisfy rigid body motion condition approxtmately.In this paper it is proved that the straight beam element and the quasi-conforming element of the curved beam and shallow curved beam, when element size is reduced infinitely, have convergence rate with the same order O(l2) and when regular elements are used. I is the element length.展开更多
Erosion of geological units and sediment load in rivers can be considered as the serious problems in recent decades.Increasing sediment loads generate major hazards for water resources development,particularly in term...Erosion of geological units and sediment load in rivers can be considered as the serious problems in recent decades.Increasing sediment loads generate major hazards for water resources development,particularly in terms of loss of reservoir storage due to sedimentation and siltation of water distribution systems.In this paper,the performance of four sediment rating curve (SRC) development methods was evaluated for the Shirin Darreh River(SDR) basin (1750 km^(2)),located in North Khorasan Province,Iran.Data of flow discharge (Q) and suspended sediment flux (SSF)(Q-SSF pairs,N=957)and daily flow discharge,recorded by the Regional Water Company of North Khorasan (RWCNK) at the Qaleh-Barbar (QB) gauging site during 1989-2018 were used.The flow discharge classification method performed best by meeting the desired criteria of most statistical indices,including normalized root mean square error (NRMSE),mean bias error (MBE),mean absolute error (MAE),index of agreement (d),and coefficient of determination (R^(2)).Based on the optimized method,the rate of suspended sediment transportation at the study site was estimated about2.7×10^(6) ton year^(-1).Erodibility of the exposed formations in the study area was estimated based on a factorial scoring model (FSM).Three indices,focused on the outcrop and erodibility,were calculated for the geological units at sub-basin and total scales.Marl deposits are the most extensive geological unit in the three sub-basins and the maximum formation outcrop ratio (FOR) and participation in erosion (PCE)were obtained for these rocks at total scale.In fact,marl unit can be regarded as the main source to supply the suspended sediments in the study basin.展开更多
Transient rate decline curve analysis for constant pressure production is presented in this pa- per for a naturally fractured reservoir. This approach is based on exponential and constant bottom-hole pressure solution...Transient rate decline curve analysis for constant pressure production is presented in this pa- per for a naturally fractured reservoir. This approach is based on exponential and constant bottom-hole pressure solution. Based on this method, when In (flow rate) is plotted versus time, two straight lines are ob- tained which can be used for estimating different parameters of a naturally fractured reservoir. Parameters such as storage capacity ratio (co), reservoir drainage area (A), reservoir shape factor (CA), fracture per- meability (ky), interporosity flow parameter (,~) and the other parameters can be determined by this ap- proach. The equations are based on a model originally presented by Warren and Root and extended by Da Prat et al. and Mavor and Cinco-Ley. The proposed method has been developed to be used for naturally fractured reservoirs with different geometries. This method does not involve the use of any chart and by us- ing the pseudo steady state flow regime, the influence of wellbore storage on the value of the parameters ob- tained from this technique is negligible. In this technique, all the parameters can be obtained directly while in conventional approaches like type curve matching method, parameters such as co and g should be ob- tained by other methods like build-up test analysis and this is one of the most important advantages of this method that could save time during reservoir analyses. Different simulated and field examples were used for testing the proposed technique. Comparison between the obtained results by this approach and the results of type curve matching method shows a high performance of decline curves in well testing.展开更多
Background Since the size of ischemic myocardium is closely related with both global and regional function of the myocardium, it is of great significance to measure the size of ischemic myocardium with non-invasive me...Background Since the size of ischemic myocardium is closely related with both global and regional function of the myocardium, it is of great significance to measure the size of ischemic myocardium with non-invasive methods. Methods Eleven mongrel dogs were subjected to occlusion of the left anterior descending coronary artery for acute ischemia. Strain rate imaging had M-mode of strain-rate (CAMM) curve pointed from the basal segment of the anterior wall to the basal segment of the inferior wall to detect the border of ischemia size. The strain rate (SR) defined the cut-off value of ischemic myocardium in a two-chamber apical view, and marked by the anterior and inferior wall on two-dimensional images respectively. Along the endocardium and epicardium, the ischemic size was curved on two-dimensional images by the trackball method and then compared with the pathologically ischemic size. And then longitudinal strain rates were compared in the cut-off value, adjacent non-ischemic and ischemic segments at which the cut-off point was defined by changing the curve M-mode of strain rate after ischemia. Results Linear correlation existed between pathology and strain rate ischemic size (r=0.884, P 〈0.001). The SR parameters were lower in ischemia and cut-off point than in non-ischemic segments. The peak SRs of systole (SSR), early diastole (EsR), late diastole (ASR), strain during ejection time (εet), and the maximum length change during the entire heart cycle (Emax) in ischemic segments lowered (P〈0.05). Time to onset of regional relaxation (TR) was prolonged (P=0.012). Conclusion SR imaging can accurately assess the size of ischemic myocardium. Chin Med J 2009; 122(2): 193-198展开更多
基金The Project Supported by National Natural Science Foundation of China
文摘The quasi-conforming element of the curved beam and shallow curved beam is given in this paper. Numerical examples illustrate that the quasi-conforming elements of the curved beam and shallow curved beam which is used to approximate the curved beam have better accuracy than the straight beam clement. The curved beam element constructed by displacement method can not satisfy rigid body motion condition and the very fine grids have to be used in order to satisfy rigid body motion condition approxtmately.In this paper it is proved that the straight beam element and the quasi-conforming element of the curved beam and shallow curved beam, when element size is reduced infinitely, have convergence rate with the same order O(l2) and when regular elements are used. I is the element length.
基金This study was conducted as the research project(Doctoral Dissertation),supported by the Ferdowsi University of Mashhad[Grant number 3/47984(contribution of the first author(M.T))]approved on 11.7.2018。
文摘Erosion of geological units and sediment load in rivers can be considered as the serious problems in recent decades.Increasing sediment loads generate major hazards for water resources development,particularly in terms of loss of reservoir storage due to sedimentation and siltation of water distribution systems.In this paper,the performance of four sediment rating curve (SRC) development methods was evaluated for the Shirin Darreh River(SDR) basin (1750 km^(2)),located in North Khorasan Province,Iran.Data of flow discharge (Q) and suspended sediment flux (SSF)(Q-SSF pairs,N=957)and daily flow discharge,recorded by the Regional Water Company of North Khorasan (RWCNK) at the Qaleh-Barbar (QB) gauging site during 1989-2018 were used.The flow discharge classification method performed best by meeting the desired criteria of most statistical indices,including normalized root mean square error (NRMSE),mean bias error (MBE),mean absolute error (MAE),index of agreement (d),and coefficient of determination (R^(2)).Based on the optimized method,the rate of suspended sediment transportation at the study site was estimated about2.7×10^(6) ton year^(-1).Erodibility of the exposed formations in the study area was estimated based on a factorial scoring model (FSM).Three indices,focused on the outcrop and erodibility,were calculated for the geological units at sub-basin and total scales.Marl deposits are the most extensive geological unit in the three sub-basins and the maximum formation outcrop ratio (FOR) and participation in erosion (PCE)were obtained for these rocks at total scale.In fact,marl unit can be regarded as the main source to supply the suspended sediments in the study basin.
文摘Transient rate decline curve analysis for constant pressure production is presented in this pa- per for a naturally fractured reservoir. This approach is based on exponential and constant bottom-hole pressure solution. Based on this method, when In (flow rate) is plotted versus time, two straight lines are ob- tained which can be used for estimating different parameters of a naturally fractured reservoir. Parameters such as storage capacity ratio (co), reservoir drainage area (A), reservoir shape factor (CA), fracture per- meability (ky), interporosity flow parameter (,~) and the other parameters can be determined by this ap- proach. The equations are based on a model originally presented by Warren and Root and extended by Da Prat et al. and Mavor and Cinco-Ley. The proposed method has been developed to be used for naturally fractured reservoirs with different geometries. This method does not involve the use of any chart and by us- ing the pseudo steady state flow regime, the influence of wellbore storage on the value of the parameters ob- tained from this technique is negligible. In this technique, all the parameters can be obtained directly while in conventional approaches like type curve matching method, parameters such as co and g should be ob- tained by other methods like build-up test analysis and this is one of the most important advantages of this method that could save time during reservoir analyses. Different simulated and field examples were used for testing the proposed technique. Comparison between the obtained results by this approach and the results of type curve matching method shows a high performance of decline curves in well testing.
基金This work was supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region (No. 200421101).
文摘Background Since the size of ischemic myocardium is closely related with both global and regional function of the myocardium, it is of great significance to measure the size of ischemic myocardium with non-invasive methods. Methods Eleven mongrel dogs were subjected to occlusion of the left anterior descending coronary artery for acute ischemia. Strain rate imaging had M-mode of strain-rate (CAMM) curve pointed from the basal segment of the anterior wall to the basal segment of the inferior wall to detect the border of ischemia size. The strain rate (SR) defined the cut-off value of ischemic myocardium in a two-chamber apical view, and marked by the anterior and inferior wall on two-dimensional images respectively. Along the endocardium and epicardium, the ischemic size was curved on two-dimensional images by the trackball method and then compared with the pathologically ischemic size. And then longitudinal strain rates were compared in the cut-off value, adjacent non-ischemic and ischemic segments at which the cut-off point was defined by changing the curve M-mode of strain rate after ischemia. Results Linear correlation existed between pathology and strain rate ischemic size (r=0.884, P 〈0.001). The SR parameters were lower in ischemia and cut-off point than in non-ischemic segments. The peak SRs of systole (SSR), early diastole (EsR), late diastole (ASR), strain during ejection time (εet), and the maximum length change during the entire heart cycle (Emax) in ischemic segments lowered (P〈0.05). Time to onset of regional relaxation (TR) was prolonged (P=0.012). Conclusion SR imaging can accurately assess the size of ischemic myocardium. Chin Med J 2009; 122(2): 193-198