Arm-Root Curve Fitting Based on Body Surface Feature Points for Young Male

This paper is aiming to obtain an arm-root curve function performing the human arm-root size and shape realistically. A gypsum replica of upper arm for young male was made and scanned for extracting the 3D coordinates of 4 feature points of shoulder point, the anterior/posterior armpit point and the axillary point describing the real arm-root shape under the normalized definitions, and the 5 landmarks were confirmed additionally for improving the fitting precision. Then, the wholly and piecewise fitting of arm-root curve with 9 feature points and mark points in total were generated respectively based on least square polynomial fitting method. Comparing to the wholly fitting, the piecewise fitted function segmented by the line between anterior and posterior axillary points showed a high fitting degree of arm-root morphology with R-square of 1, the length difference between fitted curve and gypsum curve is 0.003 cm within error range. And it provided a basic curve model with standard feature points to simulate arm-root morphology realistically by curve fitting for accurate body measurement extraction.

Local Spiral Curves Simulating Based on Hough Transformation and Center Auto-Locating of Developing Typhoon

In the developing phase of typhoon formation, the spiral belt partly emerges in satellite cloud images. This research starts from images and moves on to graphics and then to representation and recognition. Following this route, local spiral cloud belt is segmented from the raw images using image segmentation, the spiral information is extracted using mathematic morphology, and local spiral curves are detected using Hough transformation. The problem of center locating of developing typhoon has finally been solved through a search algorithm of spiral curve. For No. 99082008 cloud image, the result produced by the algorithm in this paper is at 122..3 degree west longitude, 117.5 degree north latitude. The real typhoon center location was at 122.4 degree west longitude, 18 degree north latitude.

Monte Carlo simulation of methane molecule adsorption on coal with adsorption potential

The paper presents a Monte Carlo simulation to study the adsorption characteristics of methane molecule on coal slit pores from different aspects.Firstly,a physical model of adsorption and desorption of methane molecules on micropores was established.Secondly,a grand canonical ensemble was introduced as the Monte Carlo simulation system.Thirdly,based on the model and system,the molecule simulation program was developed with VC++6.0 to simulate the isothermal adsorption relationship between the amount of molecule absorption and the factors affecting it.Lastly,the numerically simulated results were compared with measured results of adsorption coal samples of two different coal mines with a laboratory gas absorption instrument.The results show that the molecule simulations of the adsorption constants,the adsorption quantity,and the isothermal adsorption curve at the same and different coal temperatures were in good agreement with those measured in the experiments,indicating that it is feasible to use the established model and the Monte Carlo molecule simulation to study the adsorption characteristics of methane molecules in coal.

Using modified Soil Conservation Service curve number method to simulate the role of forest in flood control in the upper reach of the Tingjiang River in China

To improve flood control efficiency and increase urban resilience to flooding,the impacts of forest type change on flood control in the upper reach of the Tingjiang River(URTR) were evaluated by a modified model based on the Soil Conservation Service curve number(SCS-CN) method. Parameters of the model were selected and determined according to the comprehensive analysis of model evaluation indexes. The first simulation of forest reconstruction scenario,namely a coniferous forest covering 59.35km^2 is replaced by a broad-leaved forest showed no significant impact on the flood reduction in the URTR. The second simulation was added with 61.75km^2 bamboo forest replaced by broad-leaved forest,the reduction of flood peak discharge and flood volume could be improved significantly. Specifically,flood peak discharge of 10-year return period event was reduced to 7-year event,and the reduction rate of small flood was 21%-28%. Moreover,the flood volume was reduced by 9%-14% and 18%-35% for moderate floods and small floods,respectively. The resultssuggest that the bamboo forest reconstruction is an effective control solution for small to moderate flood in the URTR,the effect of forest conversion on flood volume is increasingly reduced as the rainfall amount increases to more extreme magnitude. Using a hydrological model with scenarios analysis is an effective simulation approach in investigating the relationship between forest type change and flood control. This method would provide reliable support for flood control and disaster mitigation in mountainous cities.

Modeling and Simulations in Symmetrical Supercapacitors Using Time Domain Mathematical Expressions

This study presents the deduction of time domain mathematical equations to simulate the curve of the charging process of a symmetrical electrochemical supercapacitor with activated carbon electrodes fed by a source of constant electric potential in time ε and the curve of the discharge process through two fixed resistors. The first resistor RCo is a control that aims to prevent sudden variations in the intensity of the electric current i1(t) present at the terminals of the electrochemical supercapacitor at the beginning of the charging process. The second resistor is the internal resistance RA of the ammeter used in the calculation of the intensity of the electric current i1(t) over time in the charging and discharging processes. The mathematical equations generated were based on a 2R(C + kUC(t)) electrical circuit model and allowed to simulate the effects of the potential-dependent capacitance (kUC(t)) on the charge and discharge curves and hence on the calculated values of the fixed capacitance C, the equivalent series resistance (ESR), the equivalent parallel resistance (EPR) and the electrical potential dependent capacitance index k.

Edge detection and mathematic fitting for corneal surface with Matlab software

AIM：To select the optimal edge detection methods to identify the corneal surface,and compare three fitting curve equations with Matlab software. METHODS：Fifteen subjects were recruited. The corneal images from optical coherence tomography（OCT）were imported into Matlab software. Five edge detection methods（Canny,Log,Prewitt,Roberts,Sobel）were used to identify the corneal surface. Then two manual identifying methods（ginput and getpts）were applied to identify the edge coordinates respectively. The differences among these methods were compared. Binomial curve（y=Ax2＋Bx＋C）,Polynomial curve [p（x）=p1xn＋p2x（n-1）＋....＋pnx＋pn＋1] and Conic section（Ax2＋Bxy＋Cy2＋Dx＋Ey＋F=0）were used for curve fitting the corneal surface respectively. The relative merits among three fitting curves were analyzed. Finally,the eccentricity（e）obtained by corneal topography and conic section were compared with paired t-test. RESULTS：Five edge detection algorithms all had continuous coordinates which indicated the edge of the corneal surface. The ordinates of manual identifying were close to the inside of the actual edges. Binomial curve was greatly affected by tilt angle. Polynomial curve was lack of geometrical properties and unstable. Conic section could calculate the tilted symmetry axis,eccentricity,circle center,etc. There were no significant differences between ＇e＇ values by corneal topography and conic section（t=0.9143,P=0.3760 〉0.05）.CONCLUSION：It is feasible to simulate the corneal surface with mathematical curve with Matlab software. Edge detection has better repeatability and higher efficiency. The manual identifying approach is an indispensable complement for detection. Polynomial and conic section are both the alternative methods for corneal curve fitting. Conic curve was the optimal choice based on the specific geometrical properties.