期刊文献+
共找到2,227篇文章
< 1 2 112 >
每页显示 20 50 100
Linguistic characteristics of English business advertisements targeted on female customers
1
作者 洪玉蓉 高淑玲 《Sino-US English Teaching》 2007年第5期62-65,共4页
Advertisement is not only an effective method of promotion, but an elegant act of planning. Successful English advertisements depend on good command and creative application of English words and sentences and smart us... Advertisement is not only an effective method of promotion, but an elegant act of planning. Successful English advertisements depend on good command and creative application of English words and sentences and smart use of various rhetorical devices. Based on some examples, this paper discusses the linguistic characteristics of English business advertisements targeted on female customers. 展开更多
关键词 commercial advertisement female customers linguistic characteristic
下载PDF
Characteristics of Implicit Customer Needs in Product Design and Methods for Their Identification
2
作者 HUANG Hua DENG Yimin 《International Journal of Plant Engineering and Management》 2022年第4期193-213,共21页
The identification of customer needs is one of the important first⁃step works for product design.Contrary to explicit ones,the implicit customer needs are less obvious,thus relying on the designers to discover.Up till... The identification of customer needs is one of the important first⁃step works for product design.Contrary to explicit ones,the implicit customer needs are less obvious,thus relying on the designers to discover.Up till now,there still lacks a rational or systematic method on the identification of implicit customer needs.Designers have to rely on their own intuition and personal experience to do the work,hindering the product design and development further on.Therefore,it is necessary to study the implicit customer needs and their identification methods.To this end,this paper first studies the characteristics of implicit needs,and clarifies the relationship between implicit needs and explicit needs.Based on this,the concept of customer needs life cycle is put forward.After that,two methods for the identification of implicit needs are proposed,including an active approach and a passive approach.For the active approach,it is suggested to exploit the functional characteristics of the product and the products in the same series or categories,for which a direct acquisition method and an evaluation data mining method are proposed,and a treadmill design case is studied.For the passive approach,it is suggested to exploit the scenario elements of product usage,for which a scenario elements questionnaire method and a scenario adaptation problem method are proposed,and a spinning bike design case is studied.The two design cases have demonstrated the process of customer needs identification and also verified the applicability of the proposed methods. 展开更多
关键词 implicit customer needs needs identification functional characteristics scenario elements
下载PDF
Female's Characteristic Index of Upper Body for Apparel Mass Customization 被引量:1
3
作者 崔志英 从杉 张渭源 《Journal of Donghua University(English Edition)》 EI CAS 2006年第5期64-67,共4页
The measurements of female aged from 18 to 50 in the East China are taken by TC2 3D-body scanner. The first five factors are obtained by factor analysis of SPSS from 25 items of the upper body which influence the body... The measurements of female aged from 18 to 50 in the East China are taken by TC2 3D-body scanner. The first five factors are obtained by factor analysis of SPSS from 25 items of the upper body which influence the body shape, that is, circumference factor, height factor, side shape factor, frontal shape factor, and shoulder slope factor. Then characteristic indices of upper body are chosen by analyzing body scan data. This study will be useful for developing pattern more fitting and faster and helpful for realizing apparel mass customization. 展开更多
关键词 characteristic index 3D body scan factor analysis mass customization.
下载PDF
Modeling customer satisfaction for bus rapid transit in Changzhou, China 被引量:4
4
作者 霍月英 李文权 陈茜 《Journal of Southeast University(English Edition)》 EI CAS 2016年第2期233-239,共7页
This paper aims to develop a customer satisfaction model for bus rapid transit (BRT). Both the socio-economic and travel characteristics of passengers were considered to be independent variables. Changzhou BRT was t... This paper aims to develop a customer satisfaction model for bus rapid transit (BRT). Both the socio-economic and travel characteristics of passengers were considered to be independent variables. Changzhou BRT was taken as an example and on which on-board surveys were conducted to collect data. Ordinal logistic regression (OLR) was used as the modeling approach. The general OLR-based procedure for modeling customer satisfaction is proposed and based on which the customer satisfaction model of Changzhou BRT is developed. Some important findings are concluded: Waiting sub-journey affects customer satisfaction the most, riding sub- journey comes second and arriving station sub-journey has relatively fewer effects. The availability of shelter and benches at stations imposes heavy influence on customer satisfaction. Passengers' socio-economic characteristics have heavy impact on customer satisfaction. 展开更多
关键词 customer satisfaction bus rapid transit MODELING socio-economic characteristics trip characteristics
下载PDF
Intersection capacity based on driver's visual characteristics 被引量:5
5
作者 陆建 陈伟伟 范红静 《Journal of Southeast University(English Edition)》 EI CAS 2009年第1期117-122,共6页
In order to reflect the influence of the drivers' characteristic differences on intersection capacity under a mixed traffic flow, a driver correction coefficient for the intersection capacity calculation according to... In order to reflect the influence of the drivers' characteristic differences on intersection capacity under a mixed traffic flow, a driver correction coefficient for the intersection capacity calculation according to the driver's visual characteristics is proposed. First, the parameters of the driver's visual characteristics at some real roads, including gaze fixation distribution, mean fixation duration, visual angle distribution and some other parameters at intersections, are collected. Then, the relationship between the traffic flow rate at intersections and the parameters of driver eye movements are established. The analytical results indicate that when the traffic flow is unsaturated, the parameters of driver eye movements change relatively little; however, when the traffic flow is saturated, the parameters of driver eye movements change drastically. Finally, the saturation-flow-rate model is modified according to the parameters of driver eye movements; thus, a capacity model of intersections considering the driver's visual characteristics is obtained. 展开更多
关键词 INTERsECTION driver's visual characteristics saturation-flow-rate capacity compensation factor
下载PDF
甘肃积石山 M_(s)6.2级地震的震害特征与启示 被引量:5
6
作者 王丽丽 王兰民 +5 位作者 卢育霞 许世阳 夏晓雨 盖海龙 池佩红 郭梅 《世界地震工程》 北大核心 2024年第1期58-71,共14页
2023年12月18日,甘肃省临夏回族自治州积石山保安族东乡族撒拉族自治县(35.70°N,102.79°E)发生了6.2级地震,震中烈度为VIII度。地震发生后,通过实地烈度评估与科学考察,对震区VI~VIII度区不同建(构)筑物与生命线工程的震害特... 2023年12月18日,甘肃省临夏回族自治州积石山保安族东乡族撒拉族自治县(35.70°N,102.79°E)发生了6.2级地震,震中烈度为VIII度。地震发生后,通过实地烈度评估与科学考察,对震区VI~VIII度区不同建(构)筑物与生命线工程的震害特点进行了统计分析;从抗震设计与施工管理、场地放大效应与地震次生灾害对建筑结构抗震性能的影响等角度,提出了此次地震的震害启示。结果表明:1)严重破坏和毁坏的建筑结构主要集中在老旧的土木结构、砖木结构和无设防或设防不规范的砖混结构。2)造成建筑结构破坏的主要原因是少量自建房抗震设计和施工的不规范、场地放大效应和地震次生灾害。3)优化和改良生土砌筑材料,改进纵横墙间的拉结措施,强化结构整体性是提高土木结构抗震的有效方法;普及“上下圈梁与构造柱”等基本抗震设防措施,规范水泥砂浆强度,提升农村工匠的施工水平,可有效提高砌体结构的整体性,避免房屋出现整体性垮塌;室内洗手间的墙体应该与房顶、纵横墙间建立有效联接,提高结构的抗震性能。4)孤突斜坡、河流高阶地与岸边为抗震不利地带。当建造用地极为匮乏,不得不选址在这些场地之上时,应该综合考虑场地的地形地貌特征、岩土体物理力学特性、水文地质条件、抗震设防目标、建筑结构类型等影响因素,做好地震灾害风险评估,根据评估结果进行科学设防。灾后重建过程中,应由政府统一规划选址、统一设计,规范施工。 展开更多
关键词 积石山6.2级地震 震害调查 场地放大效应 黄土液化流滑 震害特征
下载PDF
Creation of "Regional Characteristic" in Planning and Design of Farmers' Residential Area at the South of Lower Reaches of the Yangtze River 被引量:1
7
作者 洪杰 《Journal of Landscape Research》 2011年第4期25-28,共4页
After analysis of location feature of the south of lower reaches of Yangtze River and its construction of urban and rural integration,the paper pointed out harmonious combination between natural and artificial factors... After analysis of location feature of the south of lower reaches of Yangtze River and its construction of urban and rural integration,the paper pointed out harmonious combination between natural and artificial factors had been neglected in planning and design of farmers' residential area at the south of lower reaches of Yangtze River,"regional characteristic" losing,residential area in the form of "city community" and buildings in European style.In view of these problems,relevant planning and design thoughts and methods had been proposed as to how to create "regional characteristic" from the perspective of planning,architecture and landscape design.It discussed with emphasis the importance of construction base type and combination of environment with residential area construction;inspirations and design methods obtained from traditional architectures;and the content of landscape overall planning and specific design.It was hoped to enlighten designers to shoulder social and historical responsibility,make exploration unremittingly,and construct beautiful homelands for people. 展开更多
关键词 The south of lower reaches of YANGTZE River Farmer’s REsIDENTIAL area Regional characteristic Planning and design
下载PDF
基于数值模拟的高速公路S型曲线积水规律分析
8
作者 吴文亮 曾威凯 +1 位作者 李智 王晓飞 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2024年第8期56-64,共9页
S型曲线由于特殊的线型几何特征形成了易积水的路面区域,对于积水规律的掌握有利于在设计和建造阶段提前预防和处理积水路段的危害。该文基于计算流体力学软件Fluent,结合计算流体力学分析中基于欧拉-拉格朗日方法的欧拉液膜模型EWF(Eul... S型曲线由于特殊的线型几何特征形成了易积水的路面区域,对于积水规律的掌握有利于在设计和建造阶段提前预防和处理积水路段的危害。该文基于计算流体力学软件Fluent,结合计算流体力学分析中基于欧拉-拉格朗日方法的欧拉液膜模型EWF(Eulerian Wall Film),针对精细化处理的典型S型曲线双向多车道道路模型进行模拟计算。模拟包含了几何特征与降雨量等不同变量因素,得出了积水的水膜厚度以及流速分布规律。模拟结果表明:在降雨阶段,S型曲线横坡坡度0%~1%路段为积水路段,横坡坡度1%~2%路段为易积水路段,横坡坡度大于2%的路段积水情况受到降雨强度影响;在排水阶段,S型曲线横坡坡度0%~1%路段为排水困难路段,横坡坡度1%~2%路段为排水不畅路段,横坡坡度大于2%的路段排水顺畅,在排水时间结束时,路面在不同的几何条件和降雨条件下均能将积水排除至水膜厚度小于2 cm,横坡的大小与渐变影响了积水的横向分布与纵向分布,横向呈现中间高两边低、横断面上标高大的位置水膜厚度小和标高小的位置水膜厚度大的水膜厚度分布规律,总体呈现S型的分布规律;水膜流速在积水阶段呈现纵向上中间低两边高、水膜厚度大则水膜流速大的水膜厚度分布规律,在排水阶段则为纵向上中间高两边低的水膜流速分布规律。道路宽度影响了降雨落到路面的积水总量,进而对积水水膜厚度产生了影响;超高缓和率则主要使得积水路段、易积水路段增长,从而影响了积水分布的范围。 展开更多
关键词 计算流体力学 s型曲线 路面积水 积水规律
下载PDF
K-S变换及其电网超谐波时频分析应用
9
作者 滕召胜 梁成斌 +2 位作者 唐求 张雷鹏 成达 《湖南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2024年第6期128-136,共9页
依据FFT→优化窗→IFFT思路,突破线性时频变换的窗函数积分性能桎梏,实现高性能优化窗函数的线性时频变换应用,建立新型时频变换算法——K-S变换.对信号x(t)的FFT频谱向量进行频移处理后,与该频移点下Kaiser优化窗的频谱向量进行Hadamar... 依据FFT→优化窗→IFFT思路,突破线性时频变换的窗函数积分性能桎梏,实现高性能优化窗函数的线性时频变换应用,建立新型时频变换算法——K-S变换.对信号x(t)的FFT频谱向量进行频移处理后,与该频移点下Kaiser优化窗的频谱向量进行Hadamard乘积,再将乘积结果进行FFT逆变换(IFFT),构造出K-S变换复时频矩阵,由此获得x(t)的时间-频率-幅值、时间-频率-相位三维信息;给出逆变换的数学推导与局部性质、线性性质和变分辨率特性;0~150 kHz电网的稳态与时变超谐波信号仿真实验表明,K-S变换的时域、频域分辨能力均优于流行的短时傅里叶变换、S变换,具有优良的变分辨率性能;0~40 kHz超谐波信号的实测证明,基于K-S变换的超谐波电压幅值测量绝对误差均小于0.032 3 V. 展开更多
关键词 K-s变换 时频分析 Kaiser优化窗 变分辨率特性 电网超谐波
下载PDF
改变导叶翼型对水泵水轮机“S”特性的影响
10
作者 李琪飞 谢耕达 +1 位作者 韩天丁 李正贵 《排灌机械工程学报》 CSCD 北大核心 2024年第1期1-7,共7页
针对水泵水轮机“S”特性区域的不稳定性问题,提出使用改型活动导叶翼型进行性能提升.以某水泵水轮机模型为研究对象,采用SST k-ω湍流模型对水泵水轮机全流道进行三维数值计算,通过对活动导叶翼型的改型设计,得出流量-转速模拟曲线,分... 针对水泵水轮机“S”特性区域的不稳定性问题,提出使用改型活动导叶翼型进行性能提升.以某水泵水轮机模型为研究对象,采用SST k-ω湍流模型对水泵水轮机全流道进行三维数值计算,通过对活动导叶翼型的改型设计,得出流量-转速模拟曲线,分析水泵水轮机组“S”特性改善情况.将计算与试验结果进行对比,并对改型活动导叶翼型前后机组的无叶区进行压力脉动分析.结果表明:在保证整体效率依然保持在92%附近的前提下,新的活动导叶翼型对机组的“S”特性依旧具有改善效果;无叶区压力脉动主要是受到活动导叶叶栅区域的分流在此重新聚集影响,并且与转轮叶片的动静相互扰动引起的;改型后的活动导叶降低了无叶区的压力脉动幅值,提升了水泵水轮机运行中的并网稳定性. 展开更多
关键词 水泵水轮机 s”特性曲线 活动导叶 翼型设计 数值计算
下载PDF
基于哨兵函数和S变换的风力机叶片材料损伤特性研究
11
作者 廖力达 舒王咏 +3 位作者 张芝铭 刘亮 冯飞 陈为强 《太阳能学报》 EI CAS CSCD 北大核心 2024年第7期656-663,共8页
利用声发射检测技术研究玻璃纤维增强环氧树脂复合材料的损伤特性,在此过程中,采用哨兵函数来表征该材料的损伤程度,并通过S变换和模糊C均值(FCM)聚类来分析声发射信号,从而获得材料的损伤特征。三点弯曲实验结束后对试件断口进行扫描... 利用声发射检测技术研究玻璃纤维增强环氧树脂复合材料的损伤特性,在此过程中,采用哨兵函数来表征该材料的损伤程度,并通过S变换和模糊C均值(FCM)聚类来分析声发射信号,从而获得材料的损伤特征。三点弯曲实验结束后对试件断口进行扫描电子显微镜(SEM)拍照来验证,可得:通过对SEM照片的分析得到基体开裂、纤维脱粘、分层破坏、纤维断裂4种损伤模式;对整个声发射事件进行哨兵函数分析,观察到试件在弯曲过程中哨兵函数曲线呈明显下降趋势;对依据哨兵函数划分的不同阶段的信号进行VMD降噪处理,然后采用S变换进行时频分析得到不同损伤的特征频率,最后采用FCM聚类进行验证。结果表明:哨兵函数值的突变可作为材料断裂的预警信号,材料损伤类型的识别可依据S变换的频率分布结果进行确定。 展开更多
关键词 风力机叶片 复合材料 声发射 损伤特性 哨兵函数 s变换
下载PDF
湿气环境中CO_(2)-H_(2)S在α-Fe(110)密排面上吸附与点蚀机理研究
12
作者 李金灵 马文骏 +2 位作者 朱世东 屈撑囤 付安庆 《表面技术》 EI CAS CSCD 北大核心 2024年第20期82-93,共12页
目的从微观尺度探究CO_(2)-H_(2)S(CO_(2)和H_(2)S共存)在湿气管道顶部的吸附特性,进而揭示点蚀机理。方法基于密度泛函理论的第一性原理,利用Materials Studio构建CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)密排面的吸附模型,对CO_(2)... 目的从微观尺度探究CO_(2)-H_(2)S(CO_(2)和H_(2)S共存)在湿气管道顶部的吸附特性,进而揭示点蚀机理。方法基于密度泛函理论的第一性原理,利用Materials Studio构建CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)密排面的吸附模型,对CO_(2)、H_(2)S和CO_(2)-H_(2)S在α-Fe(110)面的吸附能、局域态密度、分波态密度和差分电荷密度进行仿真;利用高温高压釜模拟CO_(2)-H_(2)S-Cl^(-)腐蚀环境,分析L360钢在湿气环境中的腐蚀行为;最后,揭示含Cl^(-)湿气管道顶部CO_(2)-H_(2)S吸附机制与点蚀机理。结果CO_(2)、H_(2)S、CO_(2)-H_(2)S及CO_(2)-H_(2)S-Cl^(-)在最稳定位置时的吸附能分别为-4.065、-3.961、-8.538、-12.775e V,表明相较于CO_(2)与H_(2)S单独吸附,CO_(2)-H_(2)S在α-Fe(110)面的吸附能更负,Cl^(-)会进一步降低CO_(2)-H_(2)S的吸附能;且CO_(2)在与H_(2)S竞争环境电子中占优势;Cl^(-)会使CO_(2)-H_(2)S的局域态密度峰值降低,转移趋势为失去电子,基体和腐蚀介质的电子向着低能级跃迁释放出更多能量,进而加强了Fe与CO_(2)-H_(2)S间的化学键强度;Cl^(-)的2p轨道与Fe的3d轨道在-6.8 eV和-5.7 eV发生重叠,Cl^(-)被吸附到Fe表面并与Fe形成化学键生成氯化物,进而改变腐蚀产物膜的组分与结构,削弱产物膜的致密性和稳定性,减弱腐蚀阻抗力。在含Cl^(-)湿气的CO_(2)-H_(2)S环境中,液相中的Cl^(-)浓度升高,使L360钢的气相平均腐蚀速率逐渐增大,最高达2.935mm/a,点蚀越发严重。结论CO_(2)与H_(2)S在α-Fe(110)面吸附存在一定的协同和竞争作用,协同促进金属的腐蚀,FeCO3会优先沉积成膜,但H_(2)S会抑制FeCO3的生长,腐蚀产物以FeS为主;Cl^(-)会增强CO_(2)-H_(2)S与α-Fe(110)面间的作用力,弱化腐蚀产物膜层的保护性,进一步加速金属腐蚀、尤其是点蚀。 展开更多
关键词 CO_(2)-H_(2)s Cl^(-) 第一性原理 α-Fe(110)密排面 吸附特征 腐蚀机理
下载PDF
基于Ansys Workbench的双桁架码垛机械手动态性能分析
13
作者 杨春梅 马亚强 +2 位作者 丁星尘 丁禹程 曲文 《林业机械与木工设备》 2024年第5期41-46,共6页
为了提高定制化门窗材码垛分类的效率,以双桁架码垛机械手为基础对静态、动态性能进行分析以满足定制化门窗材的码垛效率。针对双桁架码垛机械手在分类码垛过程中存在多种运动状态,在双桁架码垛机械手静态性能满足刚度和强度的基础上对... 为了提高定制化门窗材码垛分类的效率,以双桁架码垛机械手为基础对静态、动态性能进行分析以满足定制化门窗材的码垛效率。针对双桁架码垛机械手在分类码垛过程中存在多种运动状态,在双桁架码垛机械手静态性能满足刚度和强度的基础上对其动态特性进行分析,动态特性分析采用模态和谐波响应方法。通过对双桁架码垛机械手的动态分析,得到了其在两个机械手不同频段时X、Y、Z向的位移量,通过响应曲线明确了频段对位移量的影响规律。两个机械手的响应曲线在规避特殊频率段以提高码垛效率、促进分类码垛的智能化发展具有重要意义。 展开更多
关键词 定制化门窗材 双桁架码垛机械手 动态特性 响应曲线
下载PDF
电液3-UPS/S并联稳定平台参数振动特性分析
14
作者 袁晓明 王维锜 +1 位作者 庞浩东 张立杰 《振动与冲击》 EI CSCD 北大核心 2024年第5期52-61,共10页
针对电液3-UPS/S并联稳定平台驱动液压缸的压力脉动所产生的参数振动,建立了稳定平台的参数振动方程并利用多尺度法求解了主共振响应与组合共振响应的一次近似解;分析了主共振与组合共振响应特性以及振动幅值在初始工作空间内的变化规律... 针对电液3-UPS/S并联稳定平台驱动液压缸的压力脉动所产生的参数振动,建立了稳定平台的参数振动方程并利用多尺度法求解了主共振响应与组合共振响应的一次近似解;分析了主共振与组合共振响应特性以及振动幅值在初始工作空间内的变化规律,最后采用四阶龙格库塔法与模态试验对参数振动模型进行验证。结果表明:数值解与理论解之间的最大误差为4.20%,固有频率理论值与试验值之间的最大误差为4.66%,可验证参数振动模型的正确性。 展开更多
关键词 电液3-UPs/s并联稳定平台 压力脉动 参数振动 多尺度法 振动特性
下载PDF
基于射流补水的水泵水轮机S特性改善研究 被引量:1
15
作者 胡加琨 周大庆 +2 位作者 王胤淞 陈会向 郭俊勋 《水电能源科学》 北大核心 2024年第1期166-169,165,共5页
针对水泵水轮机的“S”特性提出了在导叶顶盖位置无叶区处加装注水管的解决方案,并模拟了注水管安装在不同位置时的“S”特性曲线,分析了加装注水管后转轮区域内流线及转轮各叶道流量的分布规律。结果表明,于导叶顶盖加装注水管可以有... 针对水泵水轮机的“S”特性提出了在导叶顶盖位置无叶区处加装注水管的解决方案,并模拟了注水管安装在不同位置时的“S”特性曲线,分析了加装注水管后转轮区域内流线及转轮各叶道流量的分布规律。结果表明,于导叶顶盖加装注水管可以有效改善转轮内部流动,减轻转轮和导叶内部流动的相互影响,减小叶道涡的尺寸,同时有效缓解了转轮各叶道流量分布不均的现象。在注水管处于无叶区中段和活动导叶附近时,对“S”特性的改善效果明显。 展开更多
关键词 s”特性 水泵水轮机 射流补水 注水管
下载PDF
Kinematic and Dynamic Characteristics Analysis of Bennett's Linkage 被引量:5
16
作者 Changjian Zhi Sanmin Wang +1 位作者 Yuantao Sun Jianfeng Li 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2015年第3期95-100,共6页
Bennett's linkage is a spatial fourlink linkage,and has an extensive application prospect in the deployable linkages.Its kinematic and dynamic characteristics analysis has a great significance in its synthesis and... Bennett's linkage is a spatial fourlink linkage,and has an extensive application prospect in the deployable linkages.Its kinematic and dynamic characteristics analysis has a great significance in its synthesis and application. According to the geometrical conditions of Bennett 's linkage,the motion equations are established,and the expressions of angular displacement,angular velocity and angular acceleration of the followers and the displacement,velocity and acceleration of mass center of link are shown. Based on Lagrange's equation,the multi-rigid-body dynamic model of Bennett's linkage is established. In order to solve the reaction forces and moments of joint,screw theory and reciprocal screw method are combined to establish the computing method.The number of equations and unknown reaction forces and moments of joint are equal through adding link deformation equations. The influence of the included angle of adjacent axes on Bennett 's linkage 's kinematic characteristics,the dynamic characteristics and the reaction forces and moments of joint are analyzed.Results show that the included angle of adjacent axes has a great effect on velocity,acceleration,the reaction forces and moments of Bennett's linkage. The change of reaction forces and moments of joint are apparent near the singularity configuration. 展开更多
关键词 bennett’s linkage kinematic characteristics dynamic characteristics Lagrange’s equations screw theory reciprocal screw method
下载PDF
Isolation and algae-lysing characteristics of the algicidal bacterium B5 被引量:30
17
作者 MU Rui-min FAN Zheng-qiu +3 位作者 PEI Hai-yan YUAN Xue-liang Liu Si-xiu WANG Xiang-rong 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2007年第11期1336-1340,共5页
Water blooms have become a worldwide environmental problem. Recently, algicidal bacteria have attracted wide attention as possible agents for inhibiting algal water blooms. In this study, one strain of algicidal bacte... Water blooms have become a worldwide environmental problem. Recently, algicidal bacteria have attracted wide attention as possible agents for inhibiting algal water blooms. In this study, one strain of algicidal bacterium B5 was isolated from activated sludge. On the basis of analysis of its physiological characteristics and 16S rDNA gene sequence, it was identified as Bacillusfusiformis. Its algaelysing characteristics on Microcystis aeruginosa, Chlorella and Scenedesmus were tested. The results showed that: (1) the algicidal bacterium B5 is a Gram-negative bacterium. The 16S rDNA nucleotide sequence homology of strain B5 with 2 strains of B. fusiformis reached 99.86%, so B5 was identified as B. fusiformis; (2) the algal-lysing effects of the algicidal bacterium B5 on M. aeruginosa, Chlorella and Scenedesrnus were pronounced. The initial bacterial and algal cell densities strongly influence the removal rates of chlorophyll-a. The greater the initial bacterial cell density, the faster the degradation of chlorophyll-a. The greater the initial algal cell density, the slower the degradation of chlorophyll-a. When the bacterial cell density was 3.6 × 10^7 cells/ml, nearly 90% of chlorophyll-a was removed. When the chlorophyll-a concentration was less than 550 μg/L, about 70% was removed; (3) the strain B5 lysed algae by secreting metabolites and these metabolites could bear heat treatment. 展开更多
关键词 algicidal bacteria water blooms algae-lysing characteristic 16s rDNA Bacillusfusiformis
下载PDF
RITT-WU'S CHARACTERISTIC SET METHOD FOR ORDINARY DIFFERENCE POLYNOMIAL SYSTEMS WITH ARBITRARY ORDERING 被引量:6
18
作者 高小山 袁春明 张桂林 《Acta Mathematica Scientia》 SCIE CSCD 2009年第4期1063-1080,共18页
In this paper, a Ritt-Wu's characteristic set method for ordinary difference systems is proposed, which is valid for any admissible ordering. New definition for irreducible chains and new zero decomposition algorithm... In this paper, a Ritt-Wu's characteristic set method for ordinary difference systems is proposed, which is valid for any admissible ordering. New definition for irreducible chains and new zero decomposition algorithms are also proposed. 展开更多
关键词 difference polynomial ascending chain characteristic set Ritt-Wu's zero decomposition theorem
下载PDF
水泵水轮机S特性区能量损失及流动特性研究
19
作者 王李科 姚亮 +3 位作者 冯建军 朱国俊 卢金玲 阮辉 《水利学报》 EI CSCD 北大核心 2024年第3期344-354,366,共12页
为了调节电网的稳定性,抽水蓄能电站需要频繁启停和变换工况运行,导致水泵水轮机容易进入S特性区,机组振动增加,并网失败。本文以模型水泵水轮机为研究对象,采用熵产理论详细分析了S特性区不同工况下的能量损失规律,明确了熵产率分布与... 为了调节电网的稳定性,抽水蓄能电站需要频繁启停和变换工况运行,导致水泵水轮机容易进入S特性区,机组振动增加,并网失败。本文以模型水泵水轮机为研究对象,采用熵产理论详细分析了S特性区不同工况下的能量损失规律,明确了熵产率分布与内部流动结构的关系。结果表明:S特性区内近飞逸工况总熵产最大,约为设计工况的5.1倍,脉动熵产占据的比例接近80%,随着流量的减小,转轮熵产占比逐渐降低,活动导叶和尾水管的熵产占比增加。小流量工况转轮进口靠近下环位置首先出现了明显的漩涡,导致了活动导叶出口和转轮进口的高熵产区,随着流量进一步减小,漩涡逐渐向上冠转移,并且切向速度增大,在转轮进口形成挡水环,阻碍水流进入转轮,在无叶区内出现了环状分布的高熵产区。反水泵工况,水流在低压边与逆时针旋转的叶片撞击,导致水流很难进入叶片内部,形成了大尺度的回流涡结构;双列叶栅内充满大量涡结构,导致活动导叶吸力面的熵产率增大,并且向固定导叶传播。 展开更多
关键词 水泵水轮机 s特性 熵产理论 回流涡
下载PDF
SSTA SIGNAL CHARACTERISTIC ANALYSIS OVER THE INDIAN OCEAN DURING RAINY SEASON IN CHINA 被引量:2
20
作者 晏红明 严华生 谢应齐 《Journal of Tropical Meteorology》 SCIE 2001年第2期122-130,共8页
The teleconnection distribution characteristics of sea surface temperature (SST) over the India Ocean and the precipitation during rainy season in China were studied by using the methods of EOF and CCA. The results in... The teleconnection distribution characteristics of sea surface temperature (SST) over the India Ocean and the precipitation during rainy season in China were studied by using the methods of EOF and CCA. The results indicate that the change of SST field will affect the change of rain belt during rainy seasons in China, and greatly affect the precipitation in northwest and southwest China, the Yangzi and Yellow River downstream basins. Strong signal phenomena of SSTA over India Ocean were revealed that showed the anoma-lous distribution of drought and flood in China. It shows that the precipitation during rainy seasons in China may be forecast by analyzing SST distribution characteristics over the India Ocean. 展开更多
关键词 precipitation in China’s RAINY sEAsON ssTA CANONICAL correlation analysis signal characteristics
下载PDF
上一页 1 2 112 下一页 到第
使用帮助 返回顶部