Jet pipe electro-hydraulic servo valve is the heart of feedback control systems,and it is one of the mechatronic components used for precision flow control application.It consists of several precision and ddicate comp...Jet pipe electro-hydraulic servo valve is the heart of feedback control systems,and it is one of the mechatronic components used for precision flow control application.It consists of several precision and ddicate components.The performance of the jet pipe servo valve depends on many parameters.During the developmental stage,it is very difficult to ascertain the function parameters.The steady-state analysis of jet pipe electro-hydraulic servo valve has been made to simulate its fluid characteristics （flowin,flow-out,leakage flow,recovery or load pressure,etc.） by mathematical modeling.Theoretical model was conducted on various affecting parameters on the pressure,the main flow rate of fluid,or leakage flow through the receiver holes.The major parameters studied are jet pipe nozzle diameters,receiver hole diameters,angle between the two centre-lines of receiver hole,nozzle offset,and nozzle stand-of distance.In this paper the research is important to determine and optimize the structural parameters of jet pipe servo valve.Thus,equations of the pressure and flow characteristics are set up and the optimal structural parameters of jet pipe are established.展开更多
A three-dimensional computational fluid dynamics （CFD） model for gas flow through a serrated valve tray was presented. The flow field, as well as the dry-pressure drop of the valve under the full-opening condition w...A three-dimensional computational fluid dynamics （CFD） model for gas flow through a serrated valve tray was presented. The flow field, as well as the dry-pressure drop of the valve under the full-opening condition was simulated based on the proposed model by using FLUENT 6.0 software. Compared with the values of dry-pressure dro.p in different turbulent models, the.simulated.results using RNG κ-ε model are in reasonable agreement with experimental data, indicating that RNG κ-ε model is suitable in simulating gas flow through the serrated valve tray. Then the CFD model combining RNG κ-ε model was used to study the three-dimensional gas flow through the considered serrated valve tray. The simulated results showed that various eddies existed on the serrated valve tray, and both the eddy and the non-eddy areas were nearly equal. The existence of addendum can decrease the eddy area caused by gas passing through the lateral outlet slots. The size of eddies can be reduced by optimizing the distance between valves.展开更多
Layer regrouping is to divide all the layers into several sets of production series according to the physical properties and recovery percent of layers at high water-cut stage, which is an important technique to impro...Layer regrouping is to divide all the layers into several sets of production series according to the physical properties and recovery percent of layers at high water-cut stage, which is an important technique to improve oil recovery for high water-cut multilayered reservoirs. Dif- ferent regroup scenarios may lead to different production performances. Based on unstable oil-water flow theory, a multilayer commingled reservoir simulator is established by modifying the production split method. Taking into account the differences of layer properties, including per- meability, oil viscosity, and remaining oil saturation, the pseudo flow resistance contrast is proposed to serve as a characteristic index of layer regrouping for high water-cut multilayered reservoirs. The production indices of multi- layered reservoirs with different pseudo flow resistances are predicted with the established model in which the data are taken from the Shengtuo Oilfield. Simulation results show that the pseudo flow resistance contrast should be less than 4 when the layer regrouping is implemented. The K-means clustering method, which is based on the objec- tive function, is used to automatically carry out the layer regrouping process according to pseudo flow resistances. The research result is applied to the IV-VI sand groups of the second member of the Shahejie Formation in the Shengtuo Oilfield, a favorable development performance is obtained, and the oil recovery is enhanced by 6.08 %.展开更多
In order to provide theoretical basis and technical support for the afforestation and artificial water supply of P.szechuanica in arid areas,the characteristics of water consumption of P.szechuanica were explored,and ...In order to provide theoretical basis and technical support for the afforestation and artificial water supply of P.szechuanica in arid areas,the characteristics of water consumption of P.szechuanica were explored,and the law of water demand of P.szechuanica was grasped.In this paper,potted seedlings of 1-0 rooted cuttings of P.szechuanica were taken as research objects,and change situation of water consumption under different water control gradients was measured regularly by using weighing method,further analyzing dynamic change of water consumption of P.szechuanica and revealing water demand law of 1-0 rooted cuttings of P.szechuanica.The results showed that total change of water consumption of 1-0 rooted cuttings of P.szechuanica had"slow-fast-slow-fast"double-peak trend in the growth period of the current year,and corresponded with univariate linear relation(R^(2)=0.7137),with significant difference.In whole growth period,water consumption in August was the highest,which was 2.7 times of that in June and July and 1.5 times of that after September.In different water control treatments,the dynamic changes of daily and monthly water consumption were significantly different.In seven water control treatments,monthly water consumption was between(6315.95±1690.70)and(10105.28±3065.30)g/month,and mean was(8211.07±2308.23)g/month.With intensification of water control treatment,water consumption increased,but there was no seedling death due to water shortage.P.szechuanica has great plasticity in water demand,and can survive in both arid and humid environments.Meanwhile,it is revealed that P.szechuanica is the most widely distributed tree species in the region.展开更多
基金National Science and Technology Supporting Program,China(No.2011BAJ02B06)Aeronautical Science Foundation of China(No.20090738003)National Natural Science Foundations of China(No.51175378,No.50775161)
文摘Jet pipe electro-hydraulic servo valve is the heart of feedback control systems,and it is one of the mechatronic components used for precision flow control application.It consists of several precision and ddicate components.The performance of the jet pipe servo valve depends on many parameters.During the developmental stage,it is very difficult to ascertain the function parameters.The steady-state analysis of jet pipe electro-hydraulic servo valve has been made to simulate its fluid characteristics （flowin,flow-out,leakage flow,recovery or load pressure,etc.） by mathematical modeling.Theoretical model was conducted on various affecting parameters on the pressure,the main flow rate of fluid,or leakage flow through the receiver holes.The major parameters studied are jet pipe nozzle diameters,receiver hole diameters,angle between the two centre-lines of receiver hole,nozzle offset,and nozzle stand-of distance.In this paper the research is important to determine and optimize the structural parameters of jet pipe servo valve.Thus,equations of the pressure and flow characteristics are set up and the optimal structural parameters of jet pipe are established.
基金Supported by the Natural Science Foundation of Zhejiang Province （Y404052）.
文摘A three-dimensional computational fluid dynamics （CFD） model for gas flow through a serrated valve tray was presented. The flow field, as well as the dry-pressure drop of the valve under the full-opening condition was simulated based on the proposed model by using FLUENT 6.0 software. Compared with the values of dry-pressure dro.p in different turbulent models, the.simulated.results using RNG κ-ε model are in reasonable agreement with experimental data, indicating that RNG κ-ε model is suitable in simulating gas flow through the serrated valve tray. Then the CFD model combining RNG κ-ε model was used to study the three-dimensional gas flow through the considered serrated valve tray. The simulated results showed that various eddies existed on the serrated valve tray, and both the eddy and the non-eddy areas were nearly equal. The existence of addendum can decrease the eddy area caused by gas passing through the lateral outlet slots. The size of eddies can be reduced by optimizing the distance between valves.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University(IRT1294)the China National Science and Technology Major Projects(Grant No:2016ZX05011)
文摘Layer regrouping is to divide all the layers into several sets of production series according to the physical properties and recovery percent of layers at high water-cut stage, which is an important technique to improve oil recovery for high water-cut multilayered reservoirs. Dif- ferent regroup scenarios may lead to different production performances. Based on unstable oil-water flow theory, a multilayer commingled reservoir simulator is established by modifying the production split method. Taking into account the differences of layer properties, including per- meability, oil viscosity, and remaining oil saturation, the pseudo flow resistance contrast is proposed to serve as a characteristic index of layer regrouping for high water-cut multilayered reservoirs. The production indices of multi- layered reservoirs with different pseudo flow resistances are predicted with the established model in which the data are taken from the Shengtuo Oilfield. Simulation results show that the pseudo flow resistance contrast should be less than 4 when the layer regrouping is implemented. The K-means clustering method, which is based on the objec- tive function, is used to automatically carry out the layer regrouping process according to pseudo flow resistances. The research result is applied to the IV-VI sand groups of the second member of the Shahejie Formation in the Shengtuo Oilfield, a favorable development performance is obtained, and the oil recovery is enhanced by 6.08 %.
基金Supported by Natural Science Foundation of Tibet Autonomous Region(XZ2019ZRG-58)Forestry Discipline Innovation Team Construction Project of Tibet Agriculture&Animal Husbandry University(Tibet Financial Forecast:2020-001).
文摘In order to provide theoretical basis and technical support for the afforestation and artificial water supply of P.szechuanica in arid areas,the characteristics of water consumption of P.szechuanica were explored,and the law of water demand of P.szechuanica was grasped.In this paper,potted seedlings of 1-0 rooted cuttings of P.szechuanica were taken as research objects,and change situation of water consumption under different water control gradients was measured regularly by using weighing method,further analyzing dynamic change of water consumption of P.szechuanica and revealing water demand law of 1-0 rooted cuttings of P.szechuanica.The results showed that total change of water consumption of 1-0 rooted cuttings of P.szechuanica had"slow-fast-slow-fast"double-peak trend in the growth period of the current year,and corresponded with univariate linear relation(R^(2)=0.7137),with significant difference.In whole growth period,water consumption in August was the highest,which was 2.7 times of that in June and July and 1.5 times of that after September.In different water control treatments,the dynamic changes of daily and monthly water consumption were significantly different.In seven water control treatments,monthly water consumption was between(6315.95±1690.70)and(10105.28±3065.30)g/month,and mean was(8211.07±2308.23)g/month.With intensification of water control treatment,water consumption increased,but there was no seedling death due to water shortage.P.szechuanica has great plasticity in water demand,and can survive in both arid and humid environments.Meanwhile,it is revealed that P.szechuanica is the most widely distributed tree species in the region.
