Instability mechanism of mining roadway passing through fault at different angles in kilometre-deep mine and control measures of roof cutting and NPR cables

The angle α between the fault strike and the axial direction of the roadway produces different damage characteristics. In this paper, the research methodology includes theoretical analyses, numerical simulations and field experiments in the context of the Daqiang coal mine located in Shenyang, China. The stability control countermeasure of "pre-splitting cutting roof + NPR anchor cable"(PSCR-NPR) is simultaneously proposed. According to the different deformation characteristics of the roadway, the faults are innovatively classified into three types, with α of type I being 0°-30°, α of type II being 30°-60°, and α of type III being 60°-90°. The full-cycle stress evolution paths during mining roadway traverses across different types of faults are investigated by numerical simulation. Different pinch angles α lead to high stress concentration areas at different locations in the surrounding rock. The non-uniform stress field formed in the shallow surrounding rock is an important reason for the instability of the roadway. The pre-cracked cut top shifted the high stress region to the deep rock mass and formed a low stress region in the shallow rock mass. The high prestressing NPR anchor cable transforms the non-uniform stress field of the shallow surrounding rock into a uniform stress field. PSCR-NPR is applied in the fault-through roadway of Daqiang mine. The low stress area of the surrounding rock was enlarged by 3-7 times, and the cumulative convergence was reduced by 45%-50%. It provides a reference for the stability control of the deep fault-through mining roadway.

Hole cleaning evaluation and installation spacing optimization of cuttings bed remover in extended-reach drilling

In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the annulus.Once cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial operations.Cuttings bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring effects.This paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning effect.Firstly,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was designed.Next,an evaluation method of hole cleaning effect of remover was established.After that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were investigated.The results demonstrate that the new type of remover with streamline blade performs better than conventional removers.The efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling fluid.While higher rate of penetration and large wellbore size result in worse hole cleaning.These findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.

Assessing cutter-rock interaction during TBM tunnelling in granite:Large-scale standing rotary cutting tests and 3D DEM simulations

The widespread utilisation of tunnel boring machines(TBMs)in underground construction engineering requires a detailed investigation of the cutter-rock interaction.In this paper,we conduct a series of largescale standing rotary cutting tests on granite in conjunction with high-fidelity numerical simulations based on a particle-type discrete element method(DEM)to explore the effects of key cutting parameters on the TBM cutter performance and the distribution of cutter-rock contact stresses.The assessment results of cutter performance obtained from the cutting tests and numerical simulations reveal similar dependencies on the key cutting parameters.More specifically,the normal and rolling forces exhibit a positive correlation with penetration but are slightly influenced by the cutting radius.In contrast,the side force decreases as the cutting radius increases.Additionally,the side force shows a positive relationship with the penetration for smaller cutting radii but tends to become negative as the cutting radius increases.The cutter's relative effectiveness in rock breaking is significantly impacted by the penetration but shows little dependency on the cutting radius.Consequently,an optimal penetration is identified,leading to a low boreability index and specific energy.A combined Hertz-Weibull function is developed to fit the cutter-rock contact stress distribution obtained in DEM simulations,whereby an improved CSM(Colorado School of Mines)model is proposed by replacing the original monotonic cutting force distribution with this combined Hertz-Weibull model.The proposed model outperforms the original CSM model as demonstrated by a comparison of the estimated cutting forces with those from the tests/simulations.The findings from this work that advance our understanding of TBM cutter performance have important implications for improving the efficiency and reliability of TBM tunnelling in granite.

Precipitates Generation Mechanism and Surface Quality Improvement for Aluminum Alloy 6061 in Diamond Cutting

To improve the surface quality for aluminum alloy 6061(Al6061) in ultra-precision machining, we investigated the factors affecting the surface finish in single point diamond turning(SPDT)by studying influence of the precipitates generation of Al6061 on surface integrity and surface roughness.Based on the Johnson-Mehl-Avrami solid phase transformation kinetics equation, theoretical and experimental studies were conducted to build the relationship between the aging condition and the type, size and number of the precipitates for Al6061. Diamond cutting experiments were conducted to machine Al6061 samples under different aging conditions. The experimental results show that, the protruding on the chip surface is mainly Mg_(2)Si and the scratches on the machined surface mostly come from the iron-containing phase(α-, β-AlFeSi).Moreover, the generated Mg_(2)Si and α-, β-AlFeSi affect the surface integrity and the diamond turned surface roughness. Especially, the achieved surface roughness in SPDT is consistent with the variation of the number of AlFeSi and Mg_(2)Si with the medium size(more than 1 μm and less than 2 μm) in Al6061.

Failure mechanism of directional roof cutting and design method optimization

Directional roof cutting(DRC)is one of the key techniques in non-pillar coal mining with self-formed entries(NCMSE)mining method.Due to the inability to accurately measure the expansion coefficient of the goaf rock mass,the implementation of this technology often encounters design challenges,leading to suboptimal results and increased costs.This paper establishes a structural analysis model of the goaf working face roof,revealing the failure mechanism of DRC,and clarifies the positive role of DRC in improving the stress of the roadway surrounding rock and reducing the subsidence of the roof through numerical simulation experiments.On this basis,the paper further analyses the roadway pressure and roof settlement under different DRC design heights,and ultimately proposes an optimized design method for the DRC height.The results indicate that the implementation of DRC can significantly optimize the stress environment of the working face roadway surrounding rock.At the same time,during the application of DRC,three scenarios may arise:insufficient,reasonable,and excessive DRC height.Insufficient height will significantly reduce the effectiveness of the technology,while excessive height has little impact on the implementation effect but will greatly increase construction costs and difficulty.Engineering verification shows that the optimized DRC design method proposed in this paper reduces the peak stress of the protective coal pillar in the roadway by 27.2%and the central subsidence of the roof by 41.8%,demonstrating excellent application results.This method provides technical support for the further promotion of NCMSE mining method.

Ground response and failure mechanism of gob-side entry by roof cutting with hard main roof

This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensive field measurement program was conducted to determine entry deformation,roof fracture zone,and anchor bolt(cable)loading.The results indicate that GSERC deformation presents asymmetric characteristics.The maximum convergence near roof cutting side is 458 mm during the primary use process and 1120 mm during the secondary reuse process.The entry deformation is closely associated with the primary development stage,primary use stage,and secondary reuse stage.The key block movement of roof cutting structure,a complex stress environment,and a mismatch in the supporting design scheme are the failure mechanism of GSERC.A controlling ideology for mining states,including regional and stage divisions,was proposed.Both dynamic and permanent support schemes have been implemented in the field.Engineering practice results indicate that the new support scheme can efficiently ensure long-term entry safety and could be a reliable approach for other engineering practices.

Yield and Nutritive Values of Semi- and Non-Fall Dormant Alfalfa Cultivars under Late-Cutting Schedule in California’s Central Valley

California is one of the major alfalfa (Medicago sativa L) forage-producing states in the U.S, but its production area has decreased significantly in the last couple of decades. Selection of cultivars with high yield and nutritive value under late-cutting schedule strategy may help identify cultivars that growers can use to maximize yield while maintaining area for sustainable alfalfa production, but there is little information on this strategy. A field study was conducted to determine cumulative dry matter (DM) and nutritive values of 20 semi- and non-fall dormant (FD) ratings (FD 7 and FD 8 - 10, respectively) cultivars under 35-day cut in California’s Central Valley in 2020-2022. Seasonal cumulative DM yields ranged from 6.8 in 2020 to 37.0 Mg·ha−1 in 2021. Four FD 8 - 9 cultivars were the highest yielding with 3-yrs avg. DM greater than the lowest yielding lines by 46%. FD 7 cultivar “715RR” produced the highest crude protein (CP: 240 g·Kg−1) while FD 8 cultivar “HVX840RR” resulted in the highest neutral detergent fiber digestibility (NDFD: 484 g·Kg−1, 7% greater than the top yielding cultivars) but with DM yield intermediate. Yields and NDFD correlated positively but weakly indicating some semi- and non-FD cultivars performing similarly. These results suggest that selecting high yielding cultivars under 35-day cutting schedule strategy can be used as a tool to help growers to maximize yield while achieving good quality forages for sustainable alfalfa production in California’s Central Valley.

Endoscopic radial incision and cutting method for adult congenital duodenal webs:A case report

BACKGROUND Congenital duodenal webs are rare in adults and can lead to various symptoms such as nausea,vomiting,and postprandial fullness.The treatment for this disease is mostly surgical.Endoscopic treatment techniques have been developed and attempted for this disease.Endoscopic radial incision and cutting(RIC)techniques are reportedly very effective in benign anastomotic stricture.This case report highlights the effectiveness and safety of endoscopic RIC as a minimally invasive treatment for adult congenital duodenal webs.CASE SUMMARY A 23-year-old female patient with indigestion was referred to a tertiary hospital.The patient complained of postprandial fullness in the epigastric region.Previous physical examinations or blood tests indicated no abnormalities.Computed tomography revealed an eccentric broad-based delayed-enhancing mass-like lesion in the second portion of the duodenum.Endoscopy showed an enlarged gastric cavity and a significantly dilated duodenal bulb;a very small hole was observed in the distal part of the second portion,and scope passage was not possible.Gastrografin upper gastrointestinal series was performed,revealing an intraduodenal barium contrast-filled sac with a curvilinear narrow radiolucent rim,a typical"windsock"sign.Endoscopic RIC was performed on the duodenal web.The patient recovered uneventfully.Follow-up endoscopy showed a patent duodenal lumen without any residual stenosis.The patient reported complete resolution of symptoms at the 18-month follow-up.CONCLUSION Endoscopic RIC may be an effective treatment for congenital duodenal webs in adults.

Intelligent evaluation of mean cutting force of conical pick by boosting trees and Bayesian optimization

Conical picks are important tools for rock mechanical excavation.Mean cutting force(MCF)of conical pick determines the suitability of the target rock for mechanical excavation.Accurate evaluation of MCF is important for pick design and rock cutting.This study proposed hybrid methods composed of boosting trees and Bayesian optimization(BO)for accurate evaluation of MCF.220 datasets including uniaxial compression strength,tensile strength,tip angle(θ),attack angle,and cutting depth,were collected.Four boosting trees were developed based on the database to predict MCF.BO optimized the hyper-parameters of these boosting trees.Model evaluation suggested that the proposed hybrid models outperformed many commonly utilized machine learning models.The hybrid model composed of BO and categorical boosting(BO-CatBoost)was the best.Its outstanding performance was attributed to its advantages in dealing with categorical features(θincluded 6 types of angles and could be considered as categorical features).A graphical user interface was developed to facilitate the application of BO-CatBoost for the estimation of MCF.Moreover,the influences of the input parameters on the model and their relationship with MCF were analyzed.Whenθincreased from 80°to 90°,it had a significant contribution to the increase of MCF.

On-machine inspection and compensation for thin-walled parts with sculptured surface considering cutting vibration and probe posture

On-machine inspection has a significant impact on improving high-precision and efficient machining of sculptured surfaces. Due to the lack of machining information and the inability to adapt the parameters to the dynamic cutting conditions, theoretical modeling of profile inspection usually leads to insufficient adaptation, which causes inaccuracy problems. To address the above issues, a novel coupled model for profile inspection is proposed by combining the theoretical model and the data-driven model. The key process is to first realize local feature extraction based on the acquired vibration signals. The hybrid sampling model, which fuses geometric feature terms and vibration feature terms, is modeled by the lever principle. Then, the weight of each feature term is adaptively assigned by a multi-objective multi-verse optimizer.Finally, an inspection error compensation model based on the attention mechanism considering different probe postures is proposed to reduce the impact of pre-travel and radius errors on inspection accuracy. The anisotropy of the probe system error and its influence mechanism on the inspection accuracy are analyzed quantitatively and qualitatively. Compared with the previous models, the proposed hybrid profile inspection model can significantly improve the accuracy and efficiency of on-machine sampling. The proposed compensation model is able to correct the inspection errors with better accuracy. Simulations and experiments demonstrate the feasibility and validity of the proposed methods. The proposed model and corresponding new findings contribute to high-precision and efficient on-machine inspection, and help to understand the coupling mechanism of inspection errors.

Recent advances in design and preparation of micro diamond cutting tools

Micro diamond tools are indispensable for the efficient machining of microstructured surfaces.The precision in tool manufacturing and cutting performance directly determines the processing quality of components.The manufacturing of high-quality micro diamond tools relies on scientific design methods and appropriate processing techniques.However,there is currently a lack of systematic review on the design and manufacturing methods of micro diamond tools in academia.This study systematically summarizes and analyzes modern manufacturing methods for micro diamond tools,as well as the impact of tool waviness,sharpness,and durability on machining quality.Subsequently,a design method is proposed based on the theory of cutting edge strength distribution to enhance tool waviness,sharpness,and durability.Finally,this paper presents current technical challenges faced by micro diamond tools along with potential future solutions to guide scientists in this field.The aim of this review is to contribute to the further development of the current design and manufacturing processes for micro diamond cutting tools.

Application of Fuyang Paper Cutting Art in Cultural and Creative Design from the Perspective of Rural Revitalization

The application significance of Fuyang paper cutting art in cultural and creative design from the perspective of rural revitalization was discussed,and the implementation principles and specific practices of applying the elements and techniques of Fuyang traditional paper cutting art in cultural and creative products with local features were analyzed to provide reference for rural revitalization and development of cultural industry.

Cutting-edge Technological Innovation Outcome Displayed at 2024 Beijing Science and Technology Week

The 2024 National Science and Technology Week and Beijing Science and Technology Week opened in Shougang Park in Shijingshan District from May 25 to June 1.Under the theme of“Carrying forward the spirit of scientists and inspiring societal innovation,”this event focused on the new-generation IT technology,medical health,energy and technology,modern agriculture and intelligent manufacturing industries.

Design and Numerical Simulation of Dust Removal System for Sutomotive Iongitudinal Beam Plasma Cutting

To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams,and reduce the cutting surface quality degradation due to dust,a bottom-side suction dust removal system is designed,and the dust removal effect is optimized through the setting of the following dampers and diversion plates.The result of numerical simulation indicates that the particle collection rate can reach 99.44%,and the field test also proves the effectiveness of the dust removal system,which is of guiding significance for the transformation of other similar dust removal systems.

A Branch and Cut Algorithm for Two-Echelon Inventory Routing Problem with End-of-Tour Replenishment Policy

This study presents a two-echelon inventory routing problem (2E-IRP) with an end-of-tour replenishment (ETR) policy whose distribution network consists of a supplier, several distribution centers (DCs) and several retailers on a multi-period planning horizon. A formulation of the problem based on vehicle indices is proposed in the form of a mixed integer linear program (MILP). The mathematical model of the problem is solved using a branch and cut (B&C) algorithm. The results of the tests are compared to the results of a branch and price (B&P) algorithm from the literature on 2E-IRP with a classical distribution policy. The results of the tests show that the B&C algorithm solves 197 out of 200 instances (98.5%). The comparison of the B&C and B&P results shows that 185 best solutions are obtained with the B&C algorithm on 197 instances (93.9%). Overall, the B&C algorithm achieves cost reductions ranging from 0.26% to 41.44% compared to the classic 2E-IRP results solved with the B&P algorithm, with an overall average reduction of 18.08%.

Pretreatment with nano-silver extends the post-harvest longevity of gladiolus cut flowers by reducing free water mobility

The water content of cut flowers is a significant factor in their post-harvest quality.In this study,we examine the efficacy of silver nanoparticles(NS)on the longevity of cut gladiolus,with a focus on water state and distribution.We used Low-field nuclear magnetic resonance(LF-NMR)technology to identify three water fractions with different transverse relaxation times(T2)values:bound water T21(<10 ms),intermediate immobilized water T22(10-100 ms),and the slowest component free water T23(>10 ms).During the opening process,T23increased at stages 2 and 3 and then decreased,T22 decreased slowly,and T21 remained unchanged.Free water values were consistently higher than bound water and immobilized water and reached their maximum from stage 2 until stage 4,when the petals were extended and began to wilt.The vascular bundles responsible for transporting water had higher water content,as detected by proton density-weighted magnetic resonance imaging(MRI).Bound water and free water with NS pretreatments in bracts were initially lower but then two days later the signal amplitude of each water state exceeded those of the control,indicating that the treatment enhanced the water-holding capacity over time.Furthermore,NS pretreatments reduced the free water mobility of the cut flowers and inhibited stem decay.Additionally,we found that NS can enter the stem and are primarily transported upward along the xylem with water using scanning electron microscopy(SEM)and energy-dispersive X-ray spectroscopy(EDS)technology.Overall,our findings indicate that NS pretreatment reduces free water in gladiolus cut flowers,enhancing their water retention and prolonging their vase life.

FABRICATION OF DLC COATED COBALT-CEMENTED TUNGSTEN CARBIDE MICRO-DRILLS AND THEIR CUTTING PERFORMANCE

In machining the particle reinforced aluminum based composite material with high Si content using the cobalt-cemented tungsten carbide micro cutting tools, diamond like carbon （DLC） films are deposited on cobalt-cemented tungsten carbide micro-drills with two-step pretreatment method. Characteristics of DLC coated tools are investigated in bias-enhanced HFCVD system with the optimized hot filament arrangement. The optimization deposition technology is obtained and the wear mechanism of cutting tools is analyzed. The drilling performance of DLC coated tools is verified by the experiments of cutting particle reinforced aluminum based composite material （Si 15% in volume） compared with uncoated ones. Experimental results show that the two-step pretreatment method is appropriate for complex shaped cemented carbide substrates and ensures the good adhesive strength between the diamond film and the substrate. The cutting performance of DLC coated tool is enhanced 10 times when machining the Si particle reinforced aluminum based metal matrix composite compared with that of uncoated ones under the same cutting conditions.

Ultrasonic method for measuring water holdup of low velocity and high-water-cut oil-water two-phase flow

Oil reservoirs with low permeability and porosity that are in the middle and late exploitation periods in China＇s onshore oil fields are mostly in the high-water-cut production stage.This stage is associated with severely non-uniform local-velocity flow profiles and dispersed-phase concentration（of oil droplets） in oil-water two-phase flow,which makes it difficult to measure water holdup in oil wells.In this study,we use an ultrasonic method based on a transmission-type sensor in oil-water two-phase flow to measure water holdup in lowvelocity and high water-cut conditions.First,we optimize the excitation frequency of the ultrasonic sensor by calculating the sensitivity of the ultrasonic field using the finite element method for multiphysics coupling.Then we calculate the change trend of sound pressure level attenuation ratio with the increase in oil holdup to verify the feasibility of the employed diameter for the ultrasonic sensor.Based on the results,we then investigate the effects of oildroplet diameter and distribution on the ultrasonic field.To further understand the measurement characteristics of the ultrasonic sensor,we perform a flow loop test on vertical upward oilwater two-phase flow and measure the responses of the optimized ultrasonic sensor.The results show that the ultrasonic sensor yields poor resolution for a dispersed oil slug in water flow（D OS/W flow）,but the resolution is favorable for dispersed oil in water flow（D O/W flow） and very fine dispersed oil in water flow（VFD O/W flow）.This research demonstrates the potential application of a pulsed-transmission ultrasonic method for measuring the fraction of individual components in oil-water two-phase flow with a low mixture velocity and high water cut.

Study on the Introduction and Screening of Cut Roses in the Tropical Coastal Area of China

[Objective] This study aimed to select suitable cultivars of cut roses with prominent comprehensive performance which is suitable for the commercial promotion in the tropical region of South Hainan Province,including Sanya and the low-altitude area.[Method] Introduction experiment and production test were designed to observe the agronomic and economic traits of cultivars in a rose resources nursery established in Sanya.[Result] Through observation in the resources garden,18 varieties were chosen to conduct the introduction experiment,of which 8 varieties were selected to accomplish the production test.The results of the production test showed that ＇Vendela＇,＇Golden Emblem＇,＇Samantha＇ and ＇Tineke＇ showed the best adaptability;the cut flower quality of ＇Carola＇,＇Black Magic＇ and ＇Golden Emblem＇ belonged to the first grade;the yield of ＇Movie Star＇,＇Golden Emblem＇ and ＇Black Magic＇ was more than one million per hm2;except ＇Golden Emblem＇,the vase life of the other seven cultivars was more than 10 days;＇Carola＇,＇My Choice＇ and ＇Perfume White＇ had better disease-and insect-resistance;＇Carola＇,＇Vendela＇,＇Rouge Meilland＇,＇Tineke＇,＇Golden Emblem＇,＇Samantha＇,＇Perfume White＇,＇Saiun＇,＇Asagumo＇ and ＇Double Delight＇ were more resistant to blackspot,while ＇Black Magic＇,＇Versilla＇,＇Alec＇s Red＇ and ＇Movie Star＇ were less resistant to blackspot.[Conclusion] Cultivars of cut roses were able to grow and develop normally in the tropical coastal area of Hainan Province,including South Hainan and Sanya,where it was appropriate for the production of cut roses.However,it is necessary to pay attention to the prevention and control of thrips and blackspot.＇Black Magic＇,＇Carola＇,＇Vendela＇,＇Rouge Meilland＇,＇Golden Emblem＇,＇Tineke＇,＇Movie Star＇ and ＇Samantha＇ showed best comprehensive performance,which were thus worthy of large-scale popularization in Hainan Province.

Status quo and Enhancement of Competitiveness of Cut Flower Industry in China

The research reviewed status quo and problems of China＇s cut flowers and proposed countermeasures and suggestions in improving its competitiveness in order to provide theoretical references for its development.