Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direc...Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.展开更多
The diagnosis of diabetes mellitus type 2(DM2) is based either on increased plasma glucose or Glycated hemoglobin levels. Since these measures are the only means for diagnosis of DM2, they must be well adapted to each...The diagnosis of diabetes mellitus type 2(DM2) is based either on increased plasma glucose or Glycated hemoglobin levels. Since these measures are the only means for diagnosis of DM2, they must be well adapted to each population according to their metabolic characteristics, given that these may vary in each population. The World Health Organization(WHO) determined the cut-points of plasma glucose levels for the diagnosis of DM2 by associating hyperglycemia with the risk of a specific microvascular complication-retinopathy. Cardiovascular diseases are however the principal causes of mortality in patients with DM2 and we reported that in the Colombo-Ecuadorian population impaired fasting glucose and impaired glucose tolerance are both riskmarkers for myocardial infarction. We propose that the current cut-points accepted by the WHO need to be revaluated in populations such as Latin America and that there should be lower cut points for glycaemia in this population, to reduce the prevalence of cardiovascular complications associated with DM2.展开更多
Background: Among elderly people, rehabilitation is important for reducing the risk of falls and hospitalization and to maintain an independent life for longer. Motivation is a factor for elderly people to lead an act...Background: Among elderly people, rehabilitation is important for reducing the risk of falls and hospitalization and to maintain an independent life for longer. Motivation is a factor for elderly people to lead an active daily life and leave home more frequently. Purpose: The purposes of this study were to determine the optimal cut-off point in the Scale for Achievement Motive in Geriatrics (SAMG) that could identify individuals as inactive or active, based on the Frenchay Activities Index (FAI), and to compare characteristics between active and inactive groups classified by the cut-off point. Methods: A cross-sectional study of 285 community-dwelling elderly people measured SAMG and FAI and physical function. Receiver operating characteristic (ROC) analysis was used to calculate the area under the curve (AUC) that was the optimal cut-off point for the SAMG total score, with the associated sensitivity and 1-specificity when compared with the FAI results. Demographic parameters and physical function were compared between two groups defined by cut-off point. Results: The AUC was 0.78, the optimal cut-off for SAMG total score for indicating inactivity was ≤48, the sensitivity was 77.98% and the 1-specificity was 75.00%. The group with SAMG score >48 was characterized by a significantly higher proportion of women, fewer people sharing a house, and participation in more hobbies. Discussion: A cut-off point of 48 in the SAMG could be a predictive index of motivation toward goals for individuals with inactive daily activities. The group with score higher than the cut-off was characterized by more women, fewer people living together, and more hobbies than the group with lower scores.展开更多
In order to obtain the determining method of the installing angle and decrease the performance indices (cutting force and wearing rate) of the pick, the relationships among the installing angles (impact angle, inclina...In order to obtain the determining method of the installing angle and decrease the performance indices (cutting force and wearing rate) of the pick, the relationships among the installing angles (impact angle, inclination angle and the skew angle) were studied, and the static model of installing angles of the pick was built. The relationships among the impact angle, the tip angle of pick and the kinematics parameters of the pick were built, too. Moreover, the mechanic models of the maximum clearance angle and the wearing angle of the pick were set up. To research the relationships of the installing angles and the change law of the wearing angle along with the kinematics parameters, the simulation was done. In order to verify the correctness of the models, the cutting experiments were done by employing two picks with different pick tip angles. The results indicate that, the cutting force is the smallest when the direction of the resultant force of pick follows its axis, and the relationship derived among the installing angles should be satisfied. In addition, to decrease the cutting force and the wearing of the pick, the tip angle of pick should not be larger than the half of the difference between the minimum wearing angle and the impact angle of the pick, and the clearance angle must not be less than zero.展开更多
基金Sponsored by the National Science and Technology Special Program(Grant No.2011ZX04004-041)the National Natural Science Foundation of China(Grant No.90923023 and No.51275115)
文摘Single point diamond fly cutting is widely used in the manufacture of large-aperture ultra-precision optical elements. However,some micro waviness( amplitude about 30 nm,wavelength about 15 mm) along the cutting direction which will decrease the quality of the optical elements can always be found in the processed surface,and the axial vibration of the spindle caused by the cut-in process is speculated as the immediate cause of this waviness. In this paper,the analytical method of dynamic mesh is applied for simulating the dynamic behavior of the vertical spindle. The consequence is then exerted to the fly cutter and the processed surface profile is simulated. The wavelength of the simulation result coincides well with the experimental result which proves the importance of the cut-in process during the single point diamond fly cutting.
文摘The diagnosis of diabetes mellitus type 2(DM2) is based either on increased plasma glucose or Glycated hemoglobin levels. Since these measures are the only means for diagnosis of DM2, they must be well adapted to each population according to their metabolic characteristics, given that these may vary in each population. The World Health Organization(WHO) determined the cut-points of plasma glucose levels for the diagnosis of DM2 by associating hyperglycemia with the risk of a specific microvascular complication-retinopathy. Cardiovascular diseases are however the principal causes of mortality in patients with DM2 and we reported that in the Colombo-Ecuadorian population impaired fasting glucose and impaired glucose tolerance are both riskmarkers for myocardial infarction. We propose that the current cut-points accepted by the WHO need to be revaluated in populations such as Latin America and that there should be lower cut points for glycaemia in this population, to reduce the prevalence of cardiovascular complications associated with DM2.
文摘Background: Among elderly people, rehabilitation is important for reducing the risk of falls and hospitalization and to maintain an independent life for longer. Motivation is a factor for elderly people to lead an active daily life and leave home more frequently. Purpose: The purposes of this study were to determine the optimal cut-off point in the Scale for Achievement Motive in Geriatrics (SAMG) that could identify individuals as inactive or active, based on the Frenchay Activities Index (FAI), and to compare characteristics between active and inactive groups classified by the cut-off point. Methods: A cross-sectional study of 285 community-dwelling elderly people measured SAMG and FAI and physical function. Receiver operating characteristic (ROC) analysis was used to calculate the area under the curve (AUC) that was the optimal cut-off point for the SAMG total score, with the associated sensitivity and 1-specificity when compared with the FAI results. Demographic parameters and physical function were compared between two groups defined by cut-off point. Results: The AUC was 0.78, the optimal cut-off for SAMG total score for indicating inactivity was ≤48, the sensitivity was 77.98% and the 1-specificity was 75.00%. The group with SAMG score >48 was characterized by a significantly higher proportion of women, fewer people sharing a house, and participation in more hobbies. Discussion: A cut-off point of 48 in the SAMG could be a predictive index of motivation toward goals for individuals with inactive daily activities. The group with score higher than the cut-off was characterized by more women, fewer people living together, and more hobbies than the group with lower scores.
基金Project(51005232) supported by the National Natural Science Foundation of ChinaProject(20100481176) supported by the China Postdoctoral Science Foundation+1 种基金Project(201104583) supported by the China Postdoctoral Special FundProject(1101106c) supported by Jiangsu Postdoctoral Foundation, China
文摘In order to obtain the determining method of the installing angle and decrease the performance indices (cutting force and wearing rate) of the pick, the relationships among the installing angles (impact angle, inclination angle and the skew angle) were studied, and the static model of installing angles of the pick was built. The relationships among the impact angle, the tip angle of pick and the kinematics parameters of the pick were built, too. Moreover, the mechanic models of the maximum clearance angle and the wearing angle of the pick were set up. To research the relationships of the installing angles and the change law of the wearing angle along with the kinematics parameters, the simulation was done. In order to verify the correctness of the models, the cutting experiments were done by employing two picks with different pick tip angles. The results indicate that, the cutting force is the smallest when the direction of the resultant force of pick follows its axis, and the relationship derived among the installing angles should be satisfied. In addition, to decrease the cutting force and the wearing of the pick, the tip angle of pick should not be larger than the half of the difference between the minimum wearing angle and the impact angle of the pick, and the clearance angle must not be less than zero.
