The activation effect of boric acid as an activator is good,and we investigate the best activation conditions for the boric acid impregnation method.To represent the structural characteristics and adsorption performan...The activation effect of boric acid as an activator is good,and we investigate the best activation conditions for the boric acid impregnation method.To represent the structural characteristics and adsorption performance of the Stellera Chamaejasme based carbon molecular sieves,we use Brunner-Emmet-Teller(BET)measurements,scan-ning electron microscope(SEM),Raman spectra(Raman),X-ray diffraction(XRD),and adsorption property measurement.When the loading ratio was 0.68:1,the specific surface area was 532.21 m^(2)/g,the total pore volume was 0.24 cm 3/g,the average pore size was 1.81 nm,the adsorption value of methylene blue was 145.28 mg/g,and the adsorption value of iodine was 713.33 mg/g,the results showed that boric acid had better activation effect.The carbon molecular sieves made from Stellera Chamaejasme and activated with boric acid produce two peaks on the aperture distribution graph that are densely distributed in the micropore range.This indicates that boric acid’s pore-forming tendency is primarily micropore.展开更多
MnO 2 was prepared by column method from normal spinel LiMn 2O 4 with purity of 99.38%.The influence of LiMn 2O 4 grain size and acidity of leaching solution on the lithium leaching process was studied.The result...MnO 2 was prepared by column method from normal spinel LiMn 2O 4 with purity of 99.38%.The influence of LiMn 2O 4 grain size and acidity of leaching solution on the lithium leaching process was studied.The results show that the appropriate range of LiMn 2O 4 grain size was 60-160 meshes and the concentration of leaching solution HCl was 0.1 mol·L -1.The adsorption capacity Q of λ-MnO 2 for lithium increased with the increase of pH and changed markedly at pH 6.0-10.0.It was 3.80mmol/g at pH 12.0.The distribution coefficients K d of Li + and Na + were 3.406×10 4 and 2.300 respectively,and the separation coefficient α Li Na was 1.481×10 4 at pH 6.5.As a result,λ-MnO 2 is a high performance ion-sieve material for lithium ion.展开更多
The investigation of the environmental properties of minerals, i.e., environmental mineralogy, is a branch of science dealing with interactions between natural minerals and spheres of the Earth surface as well as a re...The investigation of the environmental properties of minerals, i.e., environmental mineralogy, is a branch of science dealing with interactions between natural minerals and spheres of the Earth surface as well as a reflection of global change, prevention of ecological destruction, participation in biomineralogy, and remediation of environmental pollution. Pollutant treatment by natural minerals is based on the natural law and reflects natural self-purification functions in the inorganic world, similar to that of the organic world - a biological treatment. A series of case studies related to natural self-purification, which were mostly completed by our group, are discussed in this paper. In natural cryptomelane there is a larger pseudotetragonal tunnel than that formed by [MnO6] octahedral double chains, with an aperture of 0.462-0.466 nm2, filled with K cations. Cryptomelane might be a real naturally-occurring mineral of the active octahedral molecular sieve (OMS-2). CrⅥ-bearing wastewater can be treated by natural pyrrhotite, which is used as a reductant to reduce CrⅥ and as a precipitant to precipitate CrⅢ simultaneously. Batch experiments were conducted using the CTMAB-Montmorillonite as an adsorbent for aromatic contaminants (phenol, aniline, benzene, toluene and xylenes), which are detected frequently in the leaching water from municipal waste deposits around China. The CTMAB modification has proved very effective to enhance the adsorption capacity of the sorbent. Expansion of vermiculite develops loose interior structures, such as pores or cracks, inside briquettes, and thus brings enough oxygen for combustion and the sulfation reaction. Effective combustion of the original carbon reduces the amount of dust in the fly ash.展开更多
This paper presented an investigation of particle collision and penetration using the discrete element method to understand the motion of particles and improve theoretical treatment in the sieving process. The process...This paper presented an investigation of particle collision and penetration using the discrete element method to understand the motion of particles and improve theoretical treatment in the sieving process. The process progressively was divided into looseness, stratification, collision, and penetration. Particle penetration has a direct effect on the screening performance. The penetration probability was defined, and the mathematical relationships between particle penetration and vibration parameters were established using the least squares method. To obtain the ideal penetration probability for materials the amplitude and frequency should preferably be near 3.0 mm and 25 Hz, respectively. The vibration direction angle has only a slight effect on penetration. The stage of the screening process from 0.1 to 0.7 s is the primary region for collision and penetration. This paper focused on the sieving process to more fully understand how particle collision and penetration influence the screening efficiency.展开更多
基金Graduate Innovation Project of Qinghai University for Nationalities(2021XJXS12)Graduate Innovation Project of Qinghai University for Nationalities(12M2021018).
文摘The activation effect of boric acid as an activator is good,and we investigate the best activation conditions for the boric acid impregnation method.To represent the structural characteristics and adsorption performance of the Stellera Chamaejasme based carbon molecular sieves,we use Brunner-Emmet-Teller(BET)measurements,scan-ning electron microscope(SEM),Raman spectra(Raman),X-ray diffraction(XRD),and adsorption property measurement.When the loading ratio was 0.68:1,the specific surface area was 532.21 m^(2)/g,the total pore volume was 0.24 cm 3/g,the average pore size was 1.81 nm,the adsorption value of methylene blue was 145.28 mg/g,and the adsorption value of iodine was 713.33 mg/g,the results showed that boric acid had better activation effect.The carbon molecular sieves made from Stellera Chamaejasme and activated with boric acid produce two peaks on the aperture distribution graph that are densely distributed in the micropore range.This indicates that boric acid’s pore-forming tendency is primarily micropore.
基金theNationalNaturalScienceFoundationofChi na (No .5 9972 0 2 7)theNaturalScienceFoundationofHubeiProvince (No .2 0 0 2AB0 74) )
文摘MnO 2 was prepared by column method from normal spinel LiMn 2O 4 with purity of 99.38%.The influence of LiMn 2O 4 grain size and acidity of leaching solution on the lithium leaching process was studied.The results show that the appropriate range of LiMn 2O 4 grain size was 60-160 meshes and the concentration of leaching solution HCl was 0.1 mol·L -1.The adsorption capacity Q of λ-MnO 2 for lithium increased with the increase of pH and changed markedly at pH 6.0-10.0.It was 3.80mmol/g at pH 12.0.The distribution coefficients K d of Li + and Na + were 3.406×10 4 and 2.300 respectively,and the separation coefficient α Li Na was 1.481×10 4 at pH 6.5.As a result,λ-MnO 2 is a high performance ion-sieve material for lithium ion.
基金supported by the National Key Program for Basic Research of China(No.2001CCA02400)the National Natural Science Foundation of China(Grant No.49672097,49972017 and 40172022).
文摘The investigation of the environmental properties of minerals, i.e., environmental mineralogy, is a branch of science dealing with interactions between natural minerals and spheres of the Earth surface as well as a reflection of global change, prevention of ecological destruction, participation in biomineralogy, and remediation of environmental pollution. Pollutant treatment by natural minerals is based on the natural law and reflects natural self-purification functions in the inorganic world, similar to that of the organic world - a biological treatment. A series of case studies related to natural self-purification, which were mostly completed by our group, are discussed in this paper. In natural cryptomelane there is a larger pseudotetragonal tunnel than that formed by [MnO6] octahedral double chains, with an aperture of 0.462-0.466 nm2, filled with K cations. Cryptomelane might be a real naturally-occurring mineral of the active octahedral molecular sieve (OMS-2). CrⅥ-bearing wastewater can be treated by natural pyrrhotite, which is used as a reductant to reduce CrⅥ and as a precipitant to precipitate CrⅢ simultaneously. Batch experiments were conducted using the CTMAB-Montmorillonite as an adsorbent for aromatic contaminants (phenol, aniline, benzene, toluene and xylenes), which are detected frequently in the leaching water from municipal waste deposits around China. The CTMAB modification has proved very effective to enhance the adsorption capacity of the sorbent. Expansion of vermiculite develops loose interior structures, such as pores or cracks, inside briquettes, and thus brings enough oxygen for combustion and the sulfation reaction. Effective combustion of the original carbon reduces the amount of dust in the fly ash.
文摘This paper presented an investigation of particle collision and penetration using the discrete element method to understand the motion of particles and improve theoretical treatment in the sieving process. The process progressively was divided into looseness, stratification, collision, and penetration. Particle penetration has a direct effect on the screening performance. The penetration probability was defined, and the mathematical relationships between particle penetration and vibration parameters were established using the least squares method. To obtain the ideal penetration probability for materials the amplitude and frequency should preferably be near 3.0 mm and 25 Hz, respectively. The vibration direction angle has only a slight effect on penetration. The stage of the screening process from 0.1 to 0.7 s is the primary region for collision and penetration. This paper focused on the sieving process to more fully understand how particle collision and penetration influence the screening efficiency.
