INTELLIGENT VIRTUAL CONTROL:MEASURING INSTRUMENT FROM WHOLE TO PART

A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrument, consists of different types of intelligent virtualinstrument (IVI) through individual components together as building blocks and can be displayeddirectly on the computer screen. This is a new concept of measuring instrument, and also animportant breakthrough after virtual instrument (VI). Virtual control makes instrument resourcesobtain further exploitation. It brings about a fundamental change to the design and manufacturingmode. The instrument therefore, can not only be produced directly inside a PC, but the product isinvolved in the 'green product' system. So far, all the present digital instruments will grow to bereplaced by intelligent control with green characteristics.

Self-heating Probe Instrument and Method for Measuring High Temperature Melting Volume Change Rate of Material

The castings defects are affected by the melting volume change rate of material. The change rate has an important effect on running safety of the high temperature thermal storage chamber, too. But the characteristics of existing measuring installations are complex structure, troublesome operation and low precision. In order to measure the melting volume change rate of material accurately and conveniently, a self-designed measuring instrument, self-heating probe instrument, and measuring method are described. Temperature in heating cavity is controlled by PID temperature controller; melting volume change rate υ and molten density are calculated based on the melt volume which is measured by the instrument. Positive and negative υ represent expansion and shrinkage of the sample volume after melting, respectively. Taking eutectic LiF＋CaF2 for example, its melting volume change rate and melting density at 1 123 K are -20.6% and 2 651 kg/m–3 measured by this instrument, which is only 0.71% smaller than literature value. Density and melting volume change rate of industry pure aluminum at 973 K and analysis pure NaCl at 1 123 K are detected by the instrument too. The measure results are agreed with report values. Measuring error sources are analyzed and several improving measures are proposed. In theory, the measuring errors of the change rate and molten density which are measured by the self-designed instrument is nearly 1/20-1/50 of that measured by the refitted mandril thermal expansion instrument. The self-designed instrument and method have the advantages of simple structure, being easy to operate, extensive applicability for material, relatively high accuracy, and most importantly, temperature and sample vapor pressure have little effect on the measurement accuracy. The presented instrument and method solve the problems of complicated structure and procedures, and large measuring errors for the samples with high vapor pressure by existing installations.

Automatic Recognition Method for Optical Measuring Instruments Based on Machine Vision

Based on a comprehensive study of various algorithms, the automatic recognition of traditional ocular optical measuring instruments is realized. Taking a universal tools microscope(UTM) lens view image as an example, a 2-layer automatic recognition model for data reading is established after adopting a series of pre-processing algorithms. This model is an optimal combination of the correlation-based template matching method and a concurrent back propagation(BP) neural network. Multiple complementary feature extraction is used in generating the eigenvectors of the concurrent network. In order to improve fault-tolerance capacity, rotation invariant features based on Zernike moments are extracted from digit characters and a 4-dimensional group of the outline features is also obtained. Moreover, the operating time and reading accuracy can be adjusted dy-namically by setting the threshold value. The experimental result indicates that the newly developed algorithm has optimal recognition precision and working speed. The average reading ratio can achieve 97.23%. The recognition method can automatically obtain the results of optical measuring instruments rapidly and stably without modifying their original structure, which meets the application requirements.

An overview on observational instruments and measuring methods for dewfall

This paper systematically summarizes previous measuring methods and observational instruments for the magnitude of dewfall on land surface, analyzes the characteristics of common observational instruments for land surface dewfall, and describes several basic dewfall measurement methods. Moreover, the basic principles of these methods and instruments are interpreted, and their advantages, disadvantages, and applicability are analyzed. Recommendations for the further improvement of these observational instruments and the development of dewfall measuring methods are presented, and new technologies and scientific proposals for exploiting dewfall are elucidated.

Research on Solar Simulation System for Test of Solar Radiation Measuring Instrument

Since traditional solar simulators are mainly applied to spacecraft and photovoltaic industry,they are not suitable for solar radiation measuring instrument test. Therefore,a deep research is carried out on solar simulators to test of solar radiation measuring instrument,so that obtain the requirements of performance test of solar radiation measuring instrument. With a combination of the requirements for national regulations of metrological verification and performance test of pyranometer and pyrheliometer,it lays emphasis on the research of design methods for improving radiation uniformity and stability of solar simulators; it also focuses on design methods of multidimensional detection workbench,which achieves different detection of solar radiation. After practical test,solar irradiation is within Φ60 mm; irradiation non-uniformity is better than ±0.8%; instability is better than ±0.72%;rotating angle precision is better than 0.09°. Then,solar simulator is used to carry out pyranometer sensitivity test,pyranometer directional response test,pyranometer tilt response test and non-linearity test for radiation instruments. Test results showthat the solar simulator meets the testing requirements of solar radiation measuring instruments.

Application of a Soil Nutrient Measuring Instrument in Vegetable Seedling Substrate

[Objective] The aim was to find an efficient method to measure available nitrogen, phosphorus and potassium content in vegetable seedling substrate. [ Method] The suitable dosage of leaching agent, ratio of the substrate to water and leaching time for the detection of nutrient contents in the substrate by a soil nutrient measuring instrument were discussed firstly, and then the results of nutrient contents measured by the soil nutrient measuring instrument were compared with that by conventional approaches. [ Result] In compadson with the conventional methods, the av- erage content of available nitrogen measured by the soil nutrient measuring instrument was slightly higher, while the average content of available phosphorus measured by the instrument was lower; the average content of available potassium measured by the instrument was close to that by the conventional method. [ Conclusion] This study could provide us a new method to detect available nitrogen, phosphorus and potassium content in seedling substrate efficiently.

A novel wide-range precision instrument for measuring three-dimensional surface topography

We developed a measuring instrument that had wide range, high precision, small measuring touch force. The instrument for three-dimensional (3D) surface topography measurement was composed of a high precision displacement sensor based on the Michelson interference principle, a 3D platform based on vertical scanning, a measuring and control circuit, and an industrial control computer. It was a closed loop control system, which changed the traditional moving stylus scanning style into a moving platform scanning style. When the workpiece was measured, the lever of the displacement sensor returned to the balanced position in every sample interval according to the zero offset of the displacement sensor. The non-linear error caused by the rotation of the lever was, therefore, very small even if the measuring range was wide. The instrument can measure the roughness and the profile size of a curved surface.

Implementation of Vibrancy Awaking Pressure Measuring Instrument for Single Hydraulic Prop

An instnmaent awakened by means of vibration for single hydraulic prop pressame measuring is described in this paper. The principle and implementation of this metlmd are introduced in detail. The instnznent uses the hgh-perftmnance single chip C8051F310 as its MCU and vibration sensor as its awaking device. It has such advantages as small vohane and low power consmnption, and moreover it could resolve the problem that traditional pressure measming instrument on single hydraulic prop can＇t be used in coal mine.

Research on Construction Technology of Optical Radiation Measuring System Based on Virtual Instrument Technolo

Using virtual instrument technology, digital signal processing technology and traditional optical radiation measuring technology to construct optical radiation measuring system breaks the construction methods of traditional instruments. Signal processing, collection, control and process of measuring system are implemented by the software LabVIEW8.2. And they are integrated in a computer. The computer not only is data processing center, but also is instrument control center. While measuring, the user uses the mouse to operate the handles including knobs, switch and buttons of virtual instrument panel to select instrument functions and set various parameters, which realizes measuring optical radiation with different wave bands and different intensity. And the user can change insmament operation panel, modify system software, transform instrument function, and customize instrument parameters, which embodies the idea that the software is the instnnnent.

Gold Measuring Instrument

The China Energy Science Research Institute has developed an instrument to check the colour of gold, which can quickly measure the content of gold and silver ingots, chains, ornaments and placer gold and does not harm the objects. It is an ideal apparatus for gold and silver shops and processing departments. Composed of a main machine, a computer and a printer, the instrument shows at once the content through graphs and a print-out of figures. It is easy to operate and highly accurate.

A CAD-based inspection planning strategy for video measuring instrument

A CAD-based inspection planning strategy for video measuring instrument is proposed to improve manufacturing effec- tiveness. The system consists of a video probe that enables itself to inspect a work piece based on a CAD model. The measurement software includes CAIP module and MDP module. The CAIP module is developed based on a CAD development platform whose kernel is the Open CASCADE. The entire system was tested, and relevant examples show that the system can accomplish automatic inspection planning task for common parts efficiently.

National Verification Regulations and Calibration Specifications of Measuring Instruments of P.R.China in 2010(2010 No.131)

General Administration of Quality Supervision,Inspection and Quarantine of P.R.China has approved the following 8 national measuring verification regulations in 2010 and publicize now.

National Verification Regulations and Calibration Specifications of Measuring Instruments of P.R.China in 2008 2008 NO.35

General Administration of Quality Supervision,Inspection and Quarantine of P.R.China has approved the following 11 national measuring verification regulations in 2008 and publicize now.

National Verification Regulations and Calibration Specifications of Measuring Instruments of P.R.China in 2008

General Administration of Quality Supervision,Inspection and Quarantine of P.R.China hasapproved the following 24 national measuring verification regulations in 2008 and publicize now.

National Verification Regulations and Calibration Specifications of Measuring Instruments of P.R.China in 2008 2008 No.22

General Administration of Quality Supervision,Inspection and Quarantine of P.R.China has approved the following 10 national measuring verification regulations in 2008 and publicize now.

Spectral Test Instrument for Color Vision Measurement

Common displays such as CRT or LCD screens have limited capabilities in displaying most color spectra correctly. The main disadvantage of these devices is that they work with three primaries and the colors displayed are the mixture of these three colours. Consequently these devices can be confusing in testing human color identification, because the spectral distribution of the colors displayed is the combined spectrum of the three primaries. We have developed a new instrument for spectrally correct color vision measurement. This instrument uses light emitting diodes (LEDs) and is capable of producing all spectra of perceivable colors, thus with appropriate test methods this instrument can be a reliable and useful tool in test~ing human color vision and in verifying color vision correction.

CHARACTER OF RETROREFLECTOR’S LIGHT FIELD’S ENERGY DISTRIBUTION AND ITS MEASURING TECHNOLOGY

The formation of the retroreflected light field is introduced in the paper and the components of the retroreflected light field are analyzed.Furthermore,a deep analysis of the factors affecting energy distribution of the retroreflected light,such as design deviation,angle of incidence,was made.The simulation of the retroreflected light field was done.Recommendation is made in detail on both the energy distribution of the retroreflected light field at different working distances and the energy distribution of the retroreflected light field at a short distance when the diverging light comes.At last,two kinds of measuring instrument for the retroreflector are introduced,one is the long tunnel measuring instrument,the other is the minitype measuring instrument based on the character of the retroreflector when the diverging light comes.

Method for Measuring Velocity of Warhead Fragments Based on Photoelectric Detection

For measuring velocity and impacting position of single fragment of warhead,a non-contact measuring method is proposed,in which a six-light-screen array,a position indicator,a multi-channel chronograph and a computer are used.The principle of measurement is described.The key device of the system is a light screen array sensor which consists of six light screens allocated with certain geometrical parameters.When the fragment flies through the light screen array,the time of passing through each of the screens is recorded by the multi-channel chronograph.According to the time data and the geometrical parameters of the array,the velocity vector and the location of the fragment can be calculated immediately.The presented method can be used to locate the fragment and to measure the real velocity on its flying direction.It can also be used to measure the velocity of a fragment swarm after the system is engineered further.

PENETRATION RATE MEASUREMENT AND ITS INSTRUMENT DESIGN

The practical method for precise penetration rate measurement in a short time and the instrument design have been specially discussed in this paper.Considering the defects of the penetration rate meters available,via the balanced design in consideration of service life,costs,accuracy and reliability,a kind of penetration rate meter has been put forward.The meter consists of a magnetic clutch,a gear box and a raster disk system to pick up the signal.The meter has the following advantages-it might measure a low speed with higher accura-cy,it could disengage automatically without being divorced from the driving device during tripping rods at high speed,it has a circuit of rotary direction discrimination and of repeated counting prevention so as to eU-minate error caused by rod vibration.