This present study deals with the reinforcement of thermosetting resin blends composed of cyanate ester(CE) and benzoxazine(BOZ) resins with natural hemp fibers(NHFs). These NHFs were initially treated by using a sila...This present study deals with the reinforcement of thermosetting resin blends composed of cyanate ester(CE) and benzoxazine(BOZ) resins with natural hemp fibers(NHFs). These NHFs were initially treated by using a silane coupling agent(SCA) in order to chiefly enhance their distributions as well as adhesions within the CE/BOZ resin matrix,then incorporated with various weight amounts ranging from 5 wt% to 20 wt% with a regular interval of 5 wt%. The obtained results showed that at the maximum treated fiber loading(20 wt%), distinctive enhancements in the mechanical properties in terms of flexural strength and microhardness were obtained. Besides, the thermal stability and glass transition temperature(Tg) were appreciably enhanced and were higher than those of the pure CE/BOZ resin properties. With respect to the astonishing properties of the NHFs, these enhancements could be possibly due to the good dispersion and adhesion of the treated NHFs inside the CE/BOZ resin achieved upon using the SCA. Therefore,we believe herein that these renewable and cheap NHFs have considerable potential to be used as reinfocer materials for CE/BOZ resin composites to be used in various industrial sectors.展开更多
In the field of highly integrated printed circuit board （PCB）, the heat resistant substrate with low water absorption is very important material. To get the resin composition for the high functional substrate materi...In the field of highly integrated printed circuit board （PCB）, the heat resistant substrate with low water absorption is very important material. To get the resin composition for the high functional substrate material with low moisture absorption and high glass transition temperature （Tg） simultaneously, a fluorenyl ＂Cardo＂ epoxy was incorporated into novolac cyanate ester resin. As an optimum curing agent for the fiuorenyl epoxy, methyl nadic anhydride （MNA） was selected. Silica powders as fillers were added into the resin composition. The partial replacement of the cyanate ester resin with the fluorenyl epoxy could reduce the moisture absorption with keeping high glass transition temperature over 300 ℃. The laminate, which was fabricated from prepregs made with 40 wt% silica-filled resin composition and glass fabric, showed high Tg of 317 ℃ and low moisture absorption of 0.57%.展开更多
The properties of resin transfer molding(RTM)cyanate ester and its T800 grade carbon fiber composites were studied with the rheometer,differential scanning calorimetry(DSC),FT-IR,dynamic mechanical analyzer(DMA),therm...The properties of resin transfer molding(RTM)cyanate ester and its T800 grade carbon fiber composites were studied with the rheometer,differential scanning calorimetry(DSC),FT-IR,dynamic mechanical analyzer(DMA),thermal gravimetric analysis(TGA),mechanical property testing,and scanning electron microscopy(SEM).The results showed that the temperature of cyanate ester suitable for RTM process was 70℃.Curing process of the resin was 130℃/2 h+160℃/2 h+200℃/2 h+220℃/4 h.Glass transition temperature and heat decomposition temperature of the cured resin are 289℃and 415℃,respectively.Mechanical properties of T800/RTM cyanate composites are 13.5%higher than that of T700/RTM cyanate composites and equal to that of T800/Prepreg cyanate composites.Tg of T800/RTM cyanate composites was proved to be 291℃.Fracture pattern of the composites was flat,which proved excellent interface properties between fiber and resin in this composite.展开更多
A novel benzoxazine(BOZ)monomer is synthesized by a pot method with solvent-free to blend with cyanate ester(CE).A soluble intermediate is obtained after being cured for 20 h at 80℃.The two model compound and the ble...A novel benzoxazine(BOZ)monomer is synthesized by a pot method with solvent-free to blend with cyanate ester(CE).A soluble intermediate is obtained after being cured for 20 h at 80℃.The two model compound and the blends are analyzed with the infrared radiation(IR),nuclear magnetic resonance(NMR)spectroscopy,and differential scanning calorimetry(DSC).The results show that an intermediate of the iminocarbonate and BOZ structures is formed by the ring-open BOZ reacting with the cyanate groups and ring-unopened BOZ.Moreover,rearrangement and ring-opening occur in the postcure of the intermediate to form the alkyl isocyanurate structure with polybenzoxazine.展开更多
The thermal and dimensional stability of epoxy resin(EP)in-situ modified by cyanate ester(CE)and polydimethylsiloxane(PDMS)are investigated by means of experiments and numerical simulation.Thermal gravimetric analysis...The thermal and dimensional stability of epoxy resin(EP)in-situ modified by cyanate ester(CE)and polydimethylsiloxane(PDMS)are investigated by means of experiments and numerical simulation.Thermal gravimetric analysis(TGA)and differential scanning calorimeter(DSC)are used to analyze the heat resistance of the modified EP.The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method.The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy(FTIR).The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE.The addition of PDMS shows a slight effect on the thermal stability.The 40%CE makes the blending system exhibit the lowest initial decomposition temperature,which reduces by 15.5%and 40.8%compared with pure EP and CE,respectively.The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability.The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems.The in-situ addition of 80%CE shows the lowest volume shrinkage of6.11%.The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis.The results suggested that the introduction of 80%CE into EP results in the lowest thermal stress in the blending system,which indicates that the system has the lowest volume shrinkage,which agrees well with the experimental results.展开更多
Average aggregate number of coaggregates(N_co)of CE-n or BL-n and the fluoresc- ence probe(Np-16)have been determined by using time-resolved fluorescence spectroscopy. Chain-length,hydroxy-group and chain-foldability ...Average aggregate number of coaggregates(N_co)of CE-n or BL-n and the fluoresc- ence probe(Np-16)have been determined by using time-resolved fluorescence spectroscopy. Chain-length,hydroxy-group and chain-foldability effects on the N_co have been discussed.展开更多
基金Supported by the National Natural Science Foundation of China(51773048)the Natural Science Foundation of Heilongjiang Province(E2016025)Fundamental Research Funds for the Central Universities(HEUCFP201724,HEUCFP201791)
文摘This present study deals with the reinforcement of thermosetting resin blends composed of cyanate ester(CE) and benzoxazine(BOZ) resins with natural hemp fibers(NHFs). These NHFs were initially treated by using a silane coupling agent(SCA) in order to chiefly enhance their distributions as well as adhesions within the CE/BOZ resin matrix,then incorporated with various weight amounts ranging from 5 wt% to 20 wt% with a regular interval of 5 wt%. The obtained results showed that at the maximum treated fiber loading(20 wt%), distinctive enhancements in the mechanical properties in terms of flexural strength and microhardness were obtained. Besides, the thermal stability and glass transition temperature(Tg) were appreciably enhanced and were higher than those of the pure CE/BOZ resin properties. With respect to the astonishing properties of the NHFs, these enhancements could be possibly due to the good dispersion and adhesion of the treated NHFs inside the CE/BOZ resin achieved upon using the SCA. Therefore,we believe herein that these renewable and cheap NHFs have considerable potential to be used as reinfocer materials for CE/BOZ resin composites to be used in various industrial sectors.
文摘In the field of highly integrated printed circuit board （PCB）, the heat resistant substrate with low water absorption is very important material. To get the resin composition for the high functional substrate material with low moisture absorption and high glass transition temperature （Tg） simultaneously, a fluorenyl ＂Cardo＂ epoxy was incorporated into novolac cyanate ester resin. As an optimum curing agent for the fiuorenyl epoxy, methyl nadic anhydride （MNA） was selected. Silica powders as fillers were added into the resin composition. The partial replacement of the cyanate ester resin with the fluorenyl epoxy could reduce the moisture absorption with keeping high glass transition temperature over 300 ℃. The laminate, which was fabricated from prepregs made with 40 wt% silica-filled resin composition and glass fabric, showed high Tg of 317 ℃ and low moisture absorption of 0.57%.
文摘The properties of resin transfer molding(RTM)cyanate ester and its T800 grade carbon fiber composites were studied with the rheometer,differential scanning calorimetry(DSC),FT-IR,dynamic mechanical analyzer(DMA),thermal gravimetric analysis(TGA),mechanical property testing,and scanning electron microscopy(SEM).The results showed that the temperature of cyanate ester suitable for RTM process was 70℃.Curing process of the resin was 130℃/2 h+160℃/2 h+200℃/2 h+220℃/4 h.Glass transition temperature and heat decomposition temperature of the cured resin are 289℃and 415℃,respectively.Mechanical properties of T800/RTM cyanate composites are 13.5%higher than that of T700/RTM cyanate composites and equal to that of T800/Prepreg cyanate composites.Tg of T800/RTM cyanate composites was proved to be 291℃.Fracture pattern of the composites was flat,which proved excellent interface properties between fiber and resin in this composite.
文摘A novel benzoxazine(BOZ)monomer is synthesized by a pot method with solvent-free to blend with cyanate ester(CE).A soluble intermediate is obtained after being cured for 20 h at 80℃.The two model compound and the blends are analyzed with the infrared radiation(IR),nuclear magnetic resonance(NMR)spectroscopy,and differential scanning calorimetry(DSC).The results show that an intermediate of the iminocarbonate and BOZ structures is formed by the ring-open BOZ reacting with the cyanate groups and ring-unopened BOZ.Moreover,rearrangement and ring-opening occur in the postcure of the intermediate to form the alkyl isocyanurate structure with polybenzoxazine.
基金the Shanghai Aerospace Science and Technology Innovation Fund of China(No.SAST2019-122)。
文摘The thermal and dimensional stability of epoxy resin(EP)in-situ modified by cyanate ester(CE)and polydimethylsiloxane(PDMS)are investigated by means of experiments and numerical simulation.Thermal gravimetric analysis(TGA)and differential scanning calorimeter(DSC)are used to analyze the heat resistance of the modified EP.The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method.The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy(FTIR).The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE.The addition of PDMS shows a slight effect on the thermal stability.The 40%CE makes the blending system exhibit the lowest initial decomposition temperature,which reduces by 15.5%and 40.8%compared with pure EP and CE,respectively.The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability.The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems.The in-situ addition of 80%CE shows the lowest volume shrinkage of6.11%.The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis.The results suggested that the introduction of 80%CE into EP results in the lowest thermal stress in the blending system,which indicates that the system has the lowest volume shrinkage,which agrees well with the experimental results.
文摘Average aggregate number of coaggregates(N_co)of CE-n or BL-n and the fluoresc- ence probe(Np-16)have been determined by using time-resolved fluorescence spectroscopy. Chain-length,hydroxy-group and chain-foldability effects on the N_co have been discussed.
