Electrochemical Cycled Structure of MnV_2O_6 Nanoribbons Synthesized via Hydrothermal Route

1 Introduction Low-dimensional nanostructures, such as nanorods, nanowires, and nanotubes, have received much attention for their superior optical, electrical, catalytic and magnetic properties. Owing to their low dimensionality and quantum continement effect, low-dimensional nanoscale materials can be exploited as fundamental building blocks for nanoscience and nanodevices^[1-3]. In recent years, efforts have been devoted to develop new approaches to synthesize one-dimensional（lD） nanostructrued vanadium oxides or vanadates materials, such as V205, NaV2Os, and CuV206, which have been widely investigated in catalytic or electrochemical fields due to their outstanding structural flexibility^[4-6].

Microstructure studies of air-plasma-spray-deposited CoNiCrAlY coatings before and after thermal cyclic loading for high-temperature application

In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, X-ray diffraction（XRD）, and atomic force microscopy（AFM） were used to investigate the phases and microstructure of the as-sprayed, APS-deposited Co Ni Cr Al Y bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in Co Ni Cr Al Y bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.

Accelerated recruitment of copepod Calanus hyperboreus in pelagic slope waters of the western Arctic Ocean

Shelf-basin advection is essential to subsistence of the Arctic copepod Calanus hyperboreus population in high basin area. Its abundance, population structure and body size in pelagic layer were investigated with samples collected over a large range in the western Arctic Ocean during summer 2003, to evaluate the geographical variation in recruitment pattern. Calanus hyperboreus was absent from the shallow areas of the Chukchi Sea and most abundant in the slope area between the Chukchi Sea and Chukchi Abyssal Plain（CS-slope）. Total abundance varied between 1 110.0 and 5 815.0 ind./m^2 in the CS-slope area and ranged from 40.0 to 950.0 ind./m^2 in the other areas. Early stages（CI–IV） dominated in the CS-slope area, whereas CV and adult females were frequently recorded only in deep basin areas. Geographical difference of prosome length was most evident in CIII,with average ranging from 2.48 to 2.61 mm at the CS-slope stations and 2.16–2.37 mm at the others. Abundance of early developmental stages（CI–CIV） correlated positively with Chl a concentration, but negative correlation was observed in late stages（CV–adult）. Our results indicated that C. hyperboreus can benefit from primary production increase through accelerated development in the first growth season and the productive CS-slope area is a potential source for slope-basin replenishment.

Generalized Cyclotomic Mappings: Switching Between Polynomial, Cyclotomic, and Wreath Product Form

This paper is concerned with so-called index d generalized cyclotomic mappings of a finite field F_(q), which are functions F_(q)→F_(q) that agree with a suitable monomial function x↦axr on each coset of the index d subgroup of F_(q)^(*). We discuss two important rewriting procedures in the context of generalized cyclotomic mappings and present applications thereof that concern index d generalized cyclotomic permutations of F_(q) and pertain to cycle structures, the classification of (q−1)-cycles and involutions, as well as inversion.

Suppressed oxygen extraction and degradation of LiNixMnyCo2O2 cathodes at high charge cut-off voltages

The capacity degradation mechanism in lithium nickel-manganese-cobalt oxide （NMC） cathodes （LiNi1/3Mn1/3Co1/3O2 （NMC333） and LiNi0.4Mn0.4Co0.2O2 （NMC442）） during high-voltage （cut-off of 4.8 V） operation has been investigated. In contrast to NMC442, NMC333 exhibits rapid structural changes including severe micro-crack formation and phase transformation from a layered to a disordered rock-salt structure, as well as interfacial degradation during high-voltage cycling, leading to a rapid increase of the electrode resistance and fast capacity decline. The fundamental reason behind the poor structural and interracial stability of NMC333 was found to be correlated to its high Co content and the significant overlap between the Co3＋/4＋ t2g and O2- 2p bands, resulting in oxygen removal and consequent structural changes at high voltages. In addition, oxidation of the electrolyte solvents by the extracted oxygen species generates acidic species, which then attack the electrode surface and form highly resistive LiF. These findings highlight that both the structural and interfacial stability should be taken into account when tailoring cathode materials for high voltage battery systems.