Effect of Cyclic Loading Frequency on Undrained Behaviors of Undisturbed Marine Clay

Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for both the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are both the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.

A macroscopic multi-mechanism based constitutive model for the thermo-mechanical cyclic degeneration of shape memory effect of NiTi shape memory alloy

A macroscopic based multi-mechanism constitutive model is constructed in the framework of irreversible thermodynamics to describe the degeneration of shape memory effect occurring in the thermo-mechanical cyclic deformation of NiTi shape memory alloys (SMAs). Three phases, austenite A, twinned martensite and detwinned martensite , as well as the phase transitions occurring between each pair of phases (, , , , and are considered in the proposed model. Meanwhile, two kinds of inelastic deformation mechanisms, martensite transformation-induced plasticity and reorientation-induced plasticity, are used to explain the degeneration of shape memory effects of NiTi SMAs. The evolution equations of internal variables are proposed by attributing the degeneration of shape memory effect to the interaction between the three phases (A, , and and plastic deformation. Finally, the capability of the proposed model is verified by comparing the predictions with the experimental results of NiTi SMAs. It is shown that the degeneration of shape memory effect and its dependence on the loading level can be reasonably described by the proposed model.

Martensite Aging Effect and Thermal Cyclic Characteristics in Ti-Pd and Ti-Pd-Ni High Temperature Shape Memory Alloys

The effect of thermal cycling and aging in martensitic state in Ti-Pd-Ni alloys were investigated by DSC and TEM observations. It is shown that the thermal cycling causes the decreases in M, and Af temperatures in Ti50Pd50-xNix (x=10, 20, 30) alloys, but no obvious thermal cycling effect was observed in Ti50Pd50Pd40Ni10 alloys and the aging effect shows a curious feature, i.e., the Af temperature does not saturate even after relatively long time aging, which is considered to be due to the occurrence of recovery recrystallization during aging.

The Effectiveness of Cyclic Blockwise Distribution

In spite of the wealth Of existing data distribution methods, most parallel programming languages support only some form of cyclic blockwise distribution. The main reason why only this single method is supported is that it is relatively simple to implement. However, it is as yet nuclear whether cyclic blockwise distribution is sufficiently powerful for a wide class of distribution problems. In this paper the method will be analysed, showing that for a wide range of problems it is indeed sufficient. It will also be shown in which cases cyclic blockwise distribution can be effected to fail. From this analysis, it is possible to formulate practical guidelines to assist Programmers in choosing the cycle frequency for cyclic blockwise distribution that leads to an optimal result.

Effects of cyclic uniaxial stress on mitosis orientation

Background:Cell division is one of the key roles in the cell development,cell differentiation,embryogenesis and recovery of tissues.Independent studies have shown that spindle alignment during not only asymmetric but also symmetric cell divisions is essential

An improved model for predicting effective Young's modulus of the twisted structure under cyclic loading:taking into account the untwisting effect

Twist structures have diverse applications, ranging from dragline, electrical cable, and intelligent structure. Among these applications, tension deformation can＇t be avoided during the fabrication and working processes, which often leads to the twist structure rotation （called untwisting effect） and twist pitch increasing. As a consequence, this untwisting behavior has a large effect on the effective Young＇s modulus. In this paper, we present an improved model based on the classical Costello＇s theory to predict the effective Young＇s modulus of the basic structure, twisted by three same copper strands under cyclic loading. Series of experiments were carried out to verify the present model taking into account the untwisting effect. The experimental results have better agreements with the presented model than the common Costello＇s model.

A macroscopic constitutive model of shape memory alloy considering cyclic effects

This paper presents a macroscopic constitutive model reproducing the hysteretic behaviors of the superelastic shape memory alloy (SMA) under cyclic loading. The progressive increase of residual strain with the increased cycle number in such materials is assumed to be a consequence of the progressive increase of residual stress-induced martensitic volume fraction upon the cyclic effects. The progressive decrease of phase transformation critical stresses with the increased cycle number in such materials is assumed to be a result from the progressive increase of phase transformation critical temperatures upon the cyclic effects. A cyclic evolution equation is supposed to describe the influences of cycle effects on the material properties of the SMA under cyclic loading. A phase transformation equation expressing the phase transformation behaviors of the SMA under cyclic loading is established based on the differential relationship between martensitic volume fraction and the free energy increment of phase transformation. A mechanical constitutive equation predicting the mechanical characteristics of the SMA under cyclic loading is developed on the basis of thermodynamics and continuum mechanics. The cyclic evolution equation, phase transformation equation, and mechanical constitutive equation together compose the presented macroscopic constitutive model considering cyclic effects. Results of the numerical simulations illustrate that it can well reproduce the superelastic hysteretic behaviors of the SMA under cyclic loading.

Recyclable bifunctional aluminum salen catalyst for CO2 fixation:the efficient formation of five-membered heterocyclic compounds

A variety of unique Al(salen) complexes functionalized by imidazolium-based ionic liquid(IL) moieties with the salen ligand at the two sides of 3,3′-position have been successfully prepared, rather than familiar 5,5′-position reported previously.The catalytic activity obtained by these bifunctional catalysts could be superior to those of the binary type catalysts in the formation of five-membered heterocyclic compounds from the cycloaddition reaction of CO_2 and three-membered heterocyclic compounds(including terminal epoxides and N-substituted aziridines), presumably due to the distinguished intramolecularly synergistic catalysis, which might lead to perform the cycloaddition reaction at ambient conditions and retain excellent yield and unprecedented chemo-or regioselectivity. Moreover, the polyether-based trifunctional Al(salen) catalysts with the best catalytic performance could be regenerated and reused at least eight times without any obvious decreases in catalytic activity. Finally,the kinetic investigation suggested the structure of catalysts had important influences on the catalytic activity, thereby proposing the possible reaction mechanism.