DAMAGE AND FRACTURE EVALUATION OF GRANULAR COMPOSITE MATERIALS BY DIGITAL IMAGE CORRELATION METHOD

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steel- fiber reinforced concrete,sandstone and crystal-polymer composite.The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated.The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform(WT)coefficients of the transform spectrum.The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry,both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials.

A Hybrid Local/Nonlocal Continuum Mechanics Modeling of Damage and Fracture in Concrete Structure at High Temperatures

This paper proposes a hybrid peridynamic and classical continuum mechanical model for the high-temperature damage and fracture analysis of concrete structures.In this model,we introduce the thermal expansion into peridynamics and then couple it with the thermoelasticity based on the Morphing method.In addition,a thermomechanical constitutive model of peridynamic bond is presented inspired by the classic Mazars model for the quasi-brittle damage evolution of concrete structures under high-temperature conditions.The validity and effectiveness of the proposed model are verified through two-dimensional numerical examples,in which the influence of temperature on the damage behavior of concrete structures is investigated.Furthermore,the thermal effects on the fracture path of concrete structures are analyzed by numerical results.

Damage and Fracture Strength Behavior of Jointed Rockmass

The strength of rockmass from two aspects is analyzed.Firstly,the strength of the rockmass is mainly controlled by the critical stress value of rock,and the contribution of joints is to increase the effective stresses of rock and to decrease the damage strength of rockmass according to the macro damage mechanics of rockmass.Secondly,the strength of rockmass is mainly controlled by the fracture strength of joints.Based on the comprehensive analysis and comparison for the damage strength of rockmass and the fracture strength of joints,a composite damage theory of rockmass may be established.

A coupled thermo-mechanical peridynamic model for fracture behavior of granite subjected to heating and water-cooling processes

Thermal damage and thermal fracture of rocks are two important indicators in geothermal mining projects.This paper investigates the effects of heating and water-cooling on granite specimens at various temperatures.The laboratory uniaxial compression experiments were also conducted.Then,a coupled thermo-mechanical ordinary state-based peridynamic(OSB-PD)model and corresponding numerical scheme were developed to simulate the damage of rocks after the heating and cooling processes,and the change of crack evolution process was predicted.The results demonstrate that elevated heating temperatures exacerbate the thermal damage to the specimens,resulting in a decrease in peak strength and an increase in ductility of granite.The escalating occurrence of thermal-induced cracks significantly affects the crack evolution process during the loading phase.The numerical results accurately reproduce the damage and fracture characteristics of the granite under different final heating temperatures(FHTs),which are consistent with the test results in terms of strength,crack evolution process,and failure mode.

COMPUTER SIMULATED ANALYSES ON DEFORMATION AND FRACTURE OF NON-CRACKED AND CRACKED SPECIMENS

A unified damage and fracture model,the combinatory work density model,which is suitable for ei- ther non-cracked body or cracked body has been suggested.In the present paper,the deformation and fracture of the two kinds of tensile spceimen and TPB specimen made of 40Cr steel have been simulated by using the new mod- el together with the large èlastic-plastic deformation finite element method.The results give a good picture of the whole deformation and fracture processes of the specimens in experiments;especially,the results on the TPB specimen can be used to obtain the relationship between load and displacement at the loading point P-Δ,and between crack ex- tension and displacement at the loading point Δα-Δ,the resistance curve J_R-Δa and the fracture toughness J_(IC).All the results are in remarkable agreement with those obtained by experiments.Therefore the model suggested here can be used to simulate crack initiation and propagation in non-cracked body and fracture initiation and crack stable propa- gation in cracked body.

PERSPECTIVES IN MECHANICS OF HETEROGENEOUS SOLIDS

The Micro- and Nano-mechanics Working Group of the Chinese Society of Theoretical and Applied Mechanics organized a forum to discuss the perspectives, trends, and directions in mechanics of heterogeneous materials in January 2010. The international journal, Acta Mechanica Solida Sinica, is de- voted to all fields of solid mechanics and relevant disciplines in science, technology, and engineering, with a balanced coverage on analytical, experimental, numerical and applied investigations. On the occasion of the 30TM anniversary of Acta Mechanica Solida Sinica, its editor-in-chief, Professor Q.S. Zheng invited some of the forum participants to review the state-of-the-art of mechanics of heterogeneous solids, with a particular emphasis on the recent research development results of Chinese scientists. Their reviews are organized into five research areas as reported in different sections of this paper. ~I firstly brings in fo- cus on micro- and nano-mechanics, with regards to several selective topics, including multiscale coupled models and computational methods, nanocrystal superlattices, surface effects, micromechanical damage mechanics, and microstructural evolution of metals and shape memory alloys. ~II shows discussions on multifield coupled mechanical phenomena, e.g., multi-fields actuations of liquid crystal polymer networks, mechanical behavior of materials under radiations, and micromechanics of heterogeneous materials. In ~III, we mainly address the multiscale mechanics of biological nanocomposites, biological adhesive surface mechanics, wetting and dewetting phenomena on microstructured solid surfaces. The phononic crystals and manipulation of elastic waves were elaborated in ~IV. Finally, we conclude with a series of perspectives on solid mechanics. This review will set a primary goal of future science research and engineering application on solid mechanics with the effort of social and economic development.