EXPERIMENTAL STUDY ON DAMAGE TOLERANCE BEHAVIOUR OF COMPOSITE PANELS WITH SOFTENING STRIPS

In this paper an experimental study on damage tolerance behaviour of composite panels with softening strips is carried out. A prediction method of residual strength of panels with softening strips is proposed. The comparison between estimated and experimental results shows that the prediction method can be applied to design. In this paper the failure mechanisms are described.

Research and application of non-clay low damage temporary bridging drilling/completion fluids system

Following the basic theory of protecting gas-reservoirs from damage with the temporary bridging technology,inert calcium carbonate (CaCO3) particles,whose diameter is consistent with the size of pores or apertures in the reservoir,were selected as the bridging agent,and modified resolvable starch was selected as filtration loss reducing particles to form the non-clay low damage temporary bridging drilling/completion fluids system (NLTDFS). Under the simulated condition of the well bottom during real drilling,NLTDFS was used to conduct dynamic and static damage experiments of cores for 48 hours,respectively,and then the experimented cores were permeated with pure nitrogen from the undamaged end to the damaged one to measure their recovery of permeability. The results showed that the permeability recovery rate of the core reached 90% or so,and the damaged depth was less than 1 cm,which demonstrates that NLTDFS has higher temporary bridging effectiveness and lower damage to the gas-reservoir than other drilling fluids system. NLTDFS has been used to drill many horizontal wells,and four of them have obtained high yield of natural gas. The yield of natural gas of LP1 well reached 85×104 m3/day after completion with the rump pipe. The formation of the stable well wall and smooth drilling led to an API loss less than 4 mL and an HTHP loss less than 15 mL.

QoE Assessment and Prediction Method for HighDefinition Video Stream Using Image Damage Accumulation

The accuracy of the traditional assessment method of the quality of experience(Qo E) has been facing challenges with the growth of high-definition(HD) video streaming services.Image display-quality damage is the main factor that affects the Qo E in HD video services through UDP network transmission.In this paper,we introduce a novel objective factor known as image damage accumulation(IDA) to assess user's Qo E in HD video services.First,this paper quantitatively analyzed the effect on user quality of experience by IDA and established a mapping relationship between mean opinion scores and IDA.Furthermore,the probability of image damage caused by compression and transmission were analyzed.Based on this analysis,an objective Qo E assessment and prediction method for HD video stream service that evaluated the user experience according to IDA are proposed.The proposed method can achieve assessment and prediction accuracy on three distinct subjective tests.

Numerical modeling for the coupled thermo-mechanical processes and spalling phenomena in sp Pillar Stability Experiment (APSE)

In this paper, the coupled thermo-mechanical （TM） processes in the AEspoe Pillar Stability Experiment （APSE） carried out by the Swedish Nuclear Fuel and Waste Management Company （SKB） were simulated using both continuum and discontinuum based numerical methods. Two-dimensional （2D） and three- dimensional （3D） finite element method （FEM） and 2D distinct element method （DEM） with particles were used. The main objective for the large scale in situ experiment is to investigate the yielding strength of crystalline rock and the formation of the excavation disturbed/damaged zone （EDZ） during excavation of two boreholes, pressurizing of one of the boreholes and heating. For the DEM simulations, the heat flow algorithm was newly introduced into the original code. The calculated stress, displacement and temperature distributions were compared with the ones obtained from in situ measurements and FEM simulations. A parametric study for initial microcracks was also performed to reproduce the spalling phenomena observed in the APSE.