Static-deformation based fault diagnosis for damping spring of large vibrating screen

Based on the statics theory, a novel and feasible twice-suspended-mass method(TSMM) was proposed to deal with the seldom-studied issue of fault diagnosis for damping springs of large vibrating screen(LVS). With the static balance characteristic of the screen body/surface as well as the deformation compatibility relation of springs considered, static model of the screen surface under a certain load was established to calculate compression deformation of each spring. Accuracy of the model was validated by both an experiment based on the suspended mass method and the properties of the 3D deformation space in a numerical simulation. Furthermore, by adopting the Taylor formula and the control variate method, quantitative relationship between the change of damping spring deformation and the change of spring stiffness, defined as the deformation sensitive coefficient(DSC), was derived mathematically, from which principle of the TSMM for spring fault diagnosis is clarified. In the end, an experiment was carried out and results show that the TSMM is applicable for diagnosing the fault of single spring in a LVS.

Energy dissipation mechanism and experiment of particle dampers for gear transmission under centrifugal loads

As a passive means of vibration reduction, particle damping is mainly applied to the horizontal or vertical steady field. However, it is seldom applied to centrifugal fields. Under high speed and heavy loading, the vibration of tooth surfaces of gear transmissions becomes more severe shortening gear service life and augmenting noise. Under centrifugal loading, the particle system exhibits different characteristics, for example, particles are extruded at the end farthest from the center. We investigated gears with drilled via holes filled with damping particles. Using the discrete-element method, we developed an energy dissipation model for the particle system accounting for friction and inelastic collisions. Energy dissipation and damping characteristics of this system were analyzed. Experiments were also conducted with the gear system having different particle filling rates. The results show that this filling rate is an important parameter associated with particle damping in a centrifugal field. An unsuitable filling rate would significantly reduce damping effectiveness. With changes in rotation speed and load, the gear transmission system has different optimal filling rates. The results provide guidelines for the application of particle damping in centrifugal fields of gear transmissions.