大庆油田CIFLog测井数智云平台建设应用实践

针对大庆油田生产中测井数据量大、类型多和数据来源复杂等问题,以中国石油天然气集团有限公司大型测井处理解释软件CIFLog为基础,以业务需求为主导,采用微服务架构和测井分布式云计算技术体系,研发测井大数据存储管理、中间服务层和云端测井处理解释应用等新功能,形成了大庆油田测井数智云应用平台。目前,平台已全面安装部署到大庆油田相关单位,应用效果显著。特别在大庆油田智能决策中心,平台直接用于重点水平井随钻地质导向的现场决策,大幅提升了Ⅰ类储层的钻遇率。未来平台将重点围绕新功能研发、油田数智化应用场景建设和标准化技术体系构建等开展工作,并将取得的成果及时推广复制到西南油田、塔里木油田等油气田。CIFLog云平台作为中国油气工业软件数智化建设应用的先行典范,必将发挥越来越重要的示范引领作用。

An integrated foot transducer and data logging system for dynamic assessment of lower limb exerted forces during agricultural machinery operations

Agricultural machinery typically requires lower limb actuation forces for operations such as treadling,pedaling and tractor based.However,limited systems exist for assessment of such forces that have ergonomic influence.This study,therefore developed and evaluated a single board computer integrated foot transducer(IFT)and autonomous data logging and visualization systemtomonitor dynamic lower limb exerted forces.The systemconsists of custom developed load sensors sandwiched into foot shaped units that fit operator's both feet.Stamped forces at crank angles for operations typical to pedaling while at height(above ground level)for operation representing typical treadling operations were recorded on-board amemory card and displayed on a liquid crystal display.Evaluations were conducted by imposing external loads that significantly increased(p b 0.05)the foot exerted forces.Force trends were periodic with peaks of 73,85,110.5 and 145.4 N for left foot and 41,50,131.7 and 145.4 N for right foot at loads of 10,30,50 and 70 N,respectively during pedaling operations.Similarly,the left lower actuation limb exerted forces of 139,249 and 255 N at 5,10 and 15 N of imposed loads,respectively during treadling operation.System was also evaluated for tractor operations and exerted forces ranged from 92 to 164 and 107–176 N for clutch pedal engagement at lower to higher tractor speeds on farm and tarmacadam roads,respectively.Similarly,for brake pedal engagement,such forces ranged from106 to 173 and 120–204 N on farm and tarmacadamroads.These forces varied significantly at different forward speeds.Results suggest potential of such system for foot exerted force assessments typical to agricultural machinery systems in real field.Designsmay be evaluated or reconsidered tominimizemusculoskeletal disorder risks during prolonged operations.Work-rest schedules protocols can be developed by ergonomists for safe,efficient and comfortable operations.

Oracle Data Guard与GoldenGate技术分析对比

随着财务系统数据库的使用时间增长,数据库中的数据量也会增加,数据量越大也意味着数据库备份与恢复所需要的成本就越高,不仅是备份所需时间越来越长,恢复数据所需时间也随之增长;当数据库发生意外而导致数据库中的数据不可修复的时候,容灾远比备份更能快速有效的恢复生产业务的数据;在实际的使用过程中,我们也可以把容灾当做是一个活动的备份来使用,主要介绍了Oracle Data Guard和GoldenGate。

Reservoir heterogeneity and fracture parameter determination using electrical image logs and petrophysical data(a case study, carbonate Asmari Formation, Zagros Basin, SW Iran)

Assessment of reservoir and fracture parameters is necessary to optimize oil production,especially in heterogeneous reservoirs.Core and image logs are regarded as two of the best methods for this aim.However,due to core limitations,using image log is considered as the best method.This study aims to use electrical image logs in the carbonate Asmari Formation reservoir in Zagros Basin,SW Iran,in order to evaluate natural fractures,porosity system,permeability profile and heterogeneity index and accordingly compare the results with core and well data.The results indicated that the electrical image logs are reliable for evaluating fracture and reservoir parameters,when there is no core available for a well.Based on the results from formation micro-imager(FMI)and electrical micro-imager(EMI),Asmari was recognized as a completely fractured reservoir in studied field and the reservoir parameters are mainly controlled by fractures.Furthermore,core and image logs indicated that the secondary porosity varies from 0%to 10%.The permeability indicator indicates that zones 3 and 5 have higher permeability index.Image log permeability index shows a very reasonable permeability profile after scaling against core and modular dynamics tester mobility,mud loss and production index which vary between 1 and 1000 md.In addition,no relationship was observed between core porosity and permeability,while the permeability relied heavily on fracture aperture.Therefore,fracture aperture was considered as the most important parameter for the determination of permeability.Sudden changes were also observed at zones 1-1 and 5 in the permeability trend,due to the high fracture aperture.It can be concluded that the electrical image logs(FMI and EMI)are usable for evaluating both reservoir and fracture parameters in wells with no core data in the Zagros Basin,SW Iran.

Predicting formation lithology from log data by using a neural network

In order to increase drilling speed in deep complicated formations in Kela-2 gas field, Tarim Basin, Xinjiang, west China, it is important to predict the formation lithology for drilling bit optimization. Based on the conventional back propagation （BP） model, an improved BP model was proposed, with main modifications of back propagation of error, self-adapting algorithm, and activation function, also a prediction program was developed. The improved BP model was successfully applied to predicting the lithology of formations to be drilled in the Kela-2 gas field.

HiLog:OpenHarmony的高性能日志系统

日志是计算机系统中记录事件状态信息的的重要载体,日志系统负责计算机系统的日志生成、收集和输出.OpenHarmony是新兴的、面向全设备、全场景的开源操作系统.在所述工作之前,包括日志系统在内OpenHarmony有许多关键子系统尚未构建,而OpenHarmony的开源特性使第三方开发者可以为其贡献核心代码.为了解决Open Harmony日志系统缺乏的问题,主要开展如下工作:(1)分析当今主流日志系统的技术架构和优缺点;(2)基于OpenHarmony操作系统的异构设备互联特性设计HiLog日志系统模型规范;(3)设计并实现第1个面向OpenHarmony的日志系统HiLog,并贡献到OpenHarmony主线;(4)对HiLog日志系统的关键指标进行测试和对比试验.实验数据表明,在基础性能方面,HiLog和Log的日志写入阶段吞吐量分别为1500 KB/s和700 KB/s,相比Android日志系统吞吐量提升114%;在日志持久化方面,HiLog可以3.5%的压缩率进行持久化,并且丢包率小于6‰,远低于Log.此外,HiLog还具备数据安全、流量控制等新型实用能力.

Design and Implementation of Log Data Analysis Management System Based on Hadoop

With the rapid development of the Internet,many enterprises have launched their network platforms.When users browse,search,and click the products of these platforms,most platforms will keep records of these network behaviors,these records are often heterogeneous,and it is called log data.To effectively to analyze and manage these heterogeneous log data,so that enterprises can grasp the behavior characteristics of their platform users in time,to realize targeted recommendation of users,increase the sales volume of enterprises’products,and accelerate the development of enterprises.Firstly,we follow the process of big data collection,storage,analysis,and visualization to design the system,then,we adopt HDFS storage technology,Yarn resource management technology,and gink load balancing technology to build a Hadoop cluster to process the log data,and adopt MapReduce processing technology and data warehouse hive technology analyze the log data to obtain the results.Finally,the obtained results are displayed visually,and a log data analysis system is successfully constructed.It has been proved by practice that the system effectively realizes the collection,analysis and visualization of log data,and can accurately realize the recommendation of products by enterprises.The system is stable and effective.

Application of Seismic Inversion Using Logging Data as Constraints in Coalfield

Seismic inversion and basic theory are briefly presented and the main idea of this method is introduced. Both non-linear wave equation inversion technique and Complete Utilization of Samples Information (CUSI) neural network analysis are used in lithological interpretation in Jibei coal field. The prediction results indicate that this method can provide reliable data for thin coal exploitation and promising area evaluation.

A Real-time Lithological Identification Method based on SMOTE-Tomek and ICSA Optimization

In petroleum engineering,real-time lithology identification is very important for reservoir evaluation,drilling decisions and petroleum geological exploration.A lithology identification method while drilling based on machine learning and mud logging data is studied in this paper.This method can effectively utilize downhole parameters collected in real-time during drilling,to identify lithology in real-time and provide a reference for optimization of drilling parameters.Given the imbalance of lithology samples,the synthetic minority over-sampling technique(SMOTE)and Tomek link were used to balance the sample number of five lithologies.Meanwhile,this paper introduces Tent map,random opposition-based learning and dynamic perceived probability to the original crow search algorithm(CSA),and establishes an improved crow search algorithm(ICSA).In this paper,ICSA is used to optimize the hyperparameter combination of random forest(RF),extremely random trees(ET),extreme gradient boosting(XGB),and light gradient boosting machine(LGBM)models.In addition,this study combines the recognition advantages of the four models.The accuracy of lithology identification by the weighted average probability model reaches 0.877.The study of this paper realizes high-precision real-time lithology identification method,which can provide lithology reference for the drilling process.

THE METHOD OF ORIGINAL LOGGING DATA PROCESSING BASED ON VBA

目前主流测井仪器生成的ASCII、LAS、WIS文件格式，在卡奔BendlinkEx等测井解释软件中无法直接加载。以处理LAS文件以适应卡奔导入要求为例，介绍以ExcelBVA为基础的测井数据处理方法。利用VBA进行编程，首先通过“格式化格式”函数处理单个文件，删除卡奔软件加载时多余的信息，保留测井作业范围上各种曲线每个采点上的数值，并生成TxT文件；然后利用“批量处理”函数，对工区所有测井LAS文件进行批量处理，完成测井解释数据准备工作。该方法极大的降低了重复性数据操作，减少了人工参与和人为错误的发生，提高了工作效率，对从事地球物理和地质开发研究的人有重要意义。

Logging Data High-Resolution Sequence Stratigraphy

The recognition and contrast of bed sets in parasequence is difficult in terrestrial basin high-resolution sequence stratigraphy. This study puts forward new methods for the boundary identification and contrast of bed sets on the basis of manifold logging data. The formation of calcareous interbeds, shale resistivity differences and the relation of reservoir resistivity to altitude are considered on the basis of log curve morphological characteristics, core observation, cast thin section, X-ray diffraction and scanning electron microscopy. The results show that the thickness of calcareous interbeds is between 0.5 m and 2 m, increasing on weathering crusts and faults. Calcareous interbeds occur at the bottom of a distributary channel and the top of a distributary mouth bar. Lower resistivity shale （4-5 Ω · m） and higher resistivity shale （〉 10Ω·m） reflect differences in sediment fountain or sediment microfacies. Reservoir resistivity increases with altitude. Calcareous interbeds may be a symbol of recognition for the boundary of bed sets and isochronous contrast bed sets, and shale resistivity differences may confirm the stack relation and connectivity of bed sets. Based on this, a high-resolution chronostratigraphic frame- work of Xi-1 segment in Shinan area, Junggar basin is presented, and the connectivity of bed sets and oil-water contact is confirmed. In this chronostratigraphic framework, the growth order, stack mode and space shape of bed sets are qualitatively and quantitatively described.

FMLogs:基于模板匹配的日志解析方法

日志主要记录软硬件的运行信息,通过查看系统日志,可以找到系统出现的问题及原因,确保系统的稳定性和正常运行。日志解析的目的是将半结构化的原始日志解析为可阅读的日志模板,现有解析方法往往只注重于对原始日志的解析,而忽略了后期模板处理,导致结果的精度不能进一步提高。自此,提出了一种日志解析方法FMLogs(logs parsing based on frequency and MinHash algorithm)。该方法通过设计正则表达式和调节阈值参数以获得最佳性能,同时采用了字符级频率统计和MinHash方法对长度相同和不同的日志模板进行合并。FMLogs在七个真实数据集上进行了广泛的实验,取得了0.924的平均解析准确率和0.983的F 1-Score。实验结果表明,FMLogs是一种有效的日志解析方法,在解析日志的同时具有较高的准确性和效率,并能保证性能的稳定。

Integration of Well Logs and Seismic Data for Prospects Evaluation of an X Field, Onshore Niger Delta, Nigeria

Hydrocarbon reservoir beds have been delineated using direct hydrocarbon indicator on seismic sections as well as well logs data in X field, Onshore Niger Delta. The research methodology involved horizon interpretation to produce sub-surface structure map. Geophysical well log signatures were employed in identifying hydrocarbon bearing sand. The well-to-seismic tie revealed that the reservoir tied directly with hydrocarbon indicator (bright spot) on the seismic sections. The major structure responsible for the hydrocarbon entrapment is anticline. The crest of the anticline from the depth structural map occurs at 3450 metres.

Design and Implementation of a Photovoltaic Data Acquisition System for Some Meteorological Variables

In this paper we have developed a data logging and monitoring system, we validated the system by comparing the result from it with the existing one and found that the system performs slightly better than the existing work in the same area. This implies that the data logger and monitoring system is good and can be used to monitor solar energy variables even at the comfort of our homes. We fitted a model to the generated data and found that the meteorological variables considered accounted for 99.88% of the power output in the rainy seasons while 0.12% of the variation was not explained due to other factors. Solar panels inclined at an angle of 5° (Tilt) and facing South Pole perform optimally.

ISODATA在油水层综合判别中的应用

针对油藏地质中油水层判别问题,提出了一套利用测井资料综合判别油水层的ISODATA方法,建立了此方法的数学模型,并编制了相应的软件。运用该方法对地质情况复杂的海拉尔盆地乌尔逊地区的测井资料进行处理,总符合率达88.0%。结果表明该方法可提高油水层识别的精度。

畸变Data Matrix码图像的倾斜校正算法研究

针对Data Matrix码倾斜校正中需要多次旋转的问题,本文提出了一种畸变二维码倾斜校正方法。首先使用LoG算子对二值化后的图像进行边缘检测,再基于Data Matrix码的结构特征,通过Hough变换有效快速地确定定位符"L"所在的位置,并将"L"型交点用两条向量表示。然后通过向量叉乘计算出Data Matrix码的旋转角度、确定旋转方向,只需一次旋转即可实现倾斜校正。本文算法节省了Data Matrix码在图像恢复过程中所需的时间和工作量。

基于VideoLog可视化测井的井筒深度重采样方法研究

当前,VideoLog可视化测井视频的播放的基准线是时间。油气井的深度都在几千米不等,完整地播放一口油气井的测井视频需要十几小时。在测井资料解释阶段,处理测井视频不仅复杂,还浪费了大量的时间。为了节约时间,简化测井资料解释的步骤,现提出一种测井视频以深度值为基准线进行播放索引的研究方法。该研究方法基于接箍识别和测井视频的处理,接箍识别提供接箍数据,视频处理提供视频帧数据,二者相结合获取视频每一帧的深度值,输出数据,在测井资料解释软件中实现可视化。通过Matlab搭建的实验平台进行实验,结果计算出了每一帧图像的深度数据并实现了与深度值索引,获得了预期的实验结果。

Predictive Analysis on Hypertension Treatment using Data Mining Approach in Saudi Arabia

In the present investigation, the data sets of (Non Communicable Diseases) NCD risk factors a standard report of Saudi Arabia 2005 in collaboration with World Health Organisation have been employed for regression analysis using data mining technique and that leads to the prediction of which treatment contributes more to improvement in hypertension. The Oracle Data Miner (ODM) tool has been used for the analysis of data. The data sets for different age groups in case of blood pressure treatment for hypertension for Male using different modes have been studied. The age group is in between of 15 years to 64 years. Data mining is an appropriate and sufficiently sensitive method to analyze outcomes of which mode of treatment is more effective to which age group. The Oracle data miner predicts the best mode of treatment for each group by which one can analyse the appropriate treatment. The predictions are also been compared with the help of residual plots. The residual graphs have been correlated with the predictions.