A novel suspension-floating-circulating fluidized combustion technology for coal slurry

A novel suspension-floating-circulating fluidized combustion technology is proposed for burning coal slurry fuel in traditional circulating ftuidized bed boilers （CFBB）. This technology can solve some existing problems in large- capacity CFBB burning coal slurry. The principles of the suspension-floating-circulating fluidized combustion technology were introduced in detail in this paper. A 130 t/h CFBB was retrofitted based on the technology, and the retrofitted system mainly includes a long-distance transport sub-system, a bed-material conveying sub-system with a wind-seal device invented by the authors, a superheater thermoregulation device using a novel temperature regulator, a return loop flu- idization facility, and a pneumatic ash conveying sub-system with sealed pump. The achieved performance of the retro- fitted CFBB shows that the thermal efficiency is 89.83 %, the combustion efficiency is 96.24 %, and the blending proportion of slurry is 94 %.

Perpentylated (2, 3, 6-Tri-O-pentyl)-β-cyclodextrin Used as Capillary Gas Chromatographic Stationary Phase Prepared by Sol-gel Technology

Capillary column preparation using perpentylated (2,3,6-tri-O-pentyl)-β-cyclodextrin asstationary phase by sol-gel technology with simplicity and rapidity is described. Multiplepreparation steps in conventional column technology were avoided. The prepared columns exhibitsatisfactory chromatographic performances and pronounced selectivity for a wide range of testsolutes, and have been successfully used for the separation of nitrotoluene, dimethoxybenzene,alcohols, alkanes, dimethylphenol and cresol isomers.

Capillary Column Coated with Heptakis(2,3, 6-tri-O-octyl)-β-cyclodextrin Using Sol-gel Technology

Heptakis(2, 3, 6-tri-O-octyl)-β-cyclodextrin was coated onto the fused silica capillary by sol-gel technology. Column efficiency and column selectivity were studied. The results indicated that high ability of separation was acquired . Positional isomers of aromatic compounds were well separated.

DICP Symposium (I) on Catalysis: Future Directions of Catalysis Science and Technology October 16-18, 2003, Dalian, China

Introduction and Invitation DICP Symposium is a special series of interna-tional conference named after the Dalian Instituteof Chemical Physics (DICP). The DICP Symposiumwas founded with the purpose to promote the interna-tional communication and collaboration between theDICP and the international scientific community, to

Verifying the Effects of an Education Program Leveraging Information Technology to Promote Cervical Cancer Screening in Women Aged 20 - 29—A One-Year Longitudinal Study

The purpose of this research is to implement an IT-based education program in order to promote cervical cancer screenings for women aged 20 - 29 years, as well as to examine the results of said program. This is a longitudinal/comparative study of two groups, one for which the program was implemented (the intervention group), and the other for which it was not (the control group). The program consisted of attending a health lecture and encouragement to be screened one month, six months, and one year later sent through IT-based methods. The target was unmarried women aged 20 - 29 who had neither previously given birth nor had been screened for cervical cancer in a period one year prior. They were divided into two groups, the intervention group (n = 142) and control group (n = 145). The effectiveness of the program was assessed via an initial survey and further surveys six months and one year later. Results were based on the Japanese version of the Health Belief Model Scale for Cervical Cancer and the Pap Smear Test (HBMSCCPST), knowledge scores in the categories of Healthy Lifestyles, Cervical Cancer, Cervical Cancer Screening, and screening behavior. A two-way ANOVA of the HBMSCCPST subscales and knowledge scores in the initial, six-month, and one-year surveys was performed, showing interaction in Cervical Cancer (p = 0.00). Main effects were observed in Cervical Cancer Screening (p = 0.00) and Healthy Lifestyles (p = 0.00). Regarding the amount of change from the initial survey, knowledge scores in the Cervical Cancer (p = 0.027) and Cervical Cancer Screening (p = 0.016) categories were significantly higher in the intervention group than in the control group. There was no significant difference in cervical cancer screening rates (p = 0.26) between the two groups. However, a small-degree effect size was observed for Benefits, Seriousness, and Susceptibility subscales in both examinees and non-examinees. Although the educational program of this study was effective in improving the knowledge of women in their twenties, there was little improvement in HBMSCCPST and it did not lead to the promotion of cervical cancer screening. In order to raise interest in cervical cancer screening, it is necessary to consider useful content to guide women to consult with healthcare professionals, a long-term population approach, and organizational structure of consultation.

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

The 4th International Exhibition on Refractories, Industrial Ceramics and Furnaces(RCF Expo'2003)Beijing, China, April 15-17, 2003In conjunction with China Refractories Seminar' 2003-Technology and Markets

Organizers and Sponsors: China Association of Refractories Industry The Chinese Society for Metals The Chinese Ceramic Society

Study on In-vitro Production Technology of Embryos from Young Dorper Sheep

This study was conducted to investigate the in-vitro production technology of embryos from young Dorper sheep, so as to provide technical support for the utilization of ovarian follicles in young Dorper sheep. Tests were conducted from the induction of Dorper sheep of 4 to 8 weeks old using follicle stimulating hormone(FSH) and pregnant horse serum(PMSG), collection of oocytes, in-vitro oocyte maturation-fertilization-zygote cultivation and 2-4-cell-stage fertilized ovum transfer. The results showed that 585 oocytes were collected from eight Dorper sheep at the age of 4 and 8 weeks, with an average of 73.13 oocytes/sheep. 346 of the 2-4-cell-stage fertilized eggs were obtained, whose cleavage rate was 59.15%. 77 in-vitro fertilized eggs at 2-4-cell stage were transplanted into 17 recipient sheep, seven of which were pregnant and gave birth to 13 "test-tube sheep" with a conception rate of 41.18%. It is indicated that the hormone induction technique, in-vitro oocyte maturation-fertilization-zygote cultivation technique and 2-4-cell-stage fertilized ovum transfer technique used in this study can serve as effective techniques for the in-vitro production of embryos from Dorper sheep of 4-8 weeks old.

Application of LRB isolation technology in continuous girder bridges

This paper summarizes the superiority of lead-rubber beating （LRB） continuous girder bridges. The research method for isolation performance is discussed when pile-soil interaction is considered. By the finite element method and self-compiling program, a systematic study of the reliability of LRB continuous girder bridges is given by the use of different indicators, including the riding comfort of the LRB system, the pounding and dynamic stability when the LRB system is subjected to seismic excitations, and the reliability of the LRB system when subjected to other common horizontal loads. The results show that the LRB system has obvious advantages over the traditional continuous girder structure. The LRB isolation effect remains good even when pile-soil interaction is considered; the vertical rigidity of the LRB guarantees desirable riding comfort. The LRB demonstrates good reliability when subjected to the effects of braking, wind loads and temperature. However, it is also pointed out that the pounding of the LRB system subjected to earthquakes must be avoided, and the dynamic stability may be reduced when the LRB system has higher piers and generates a larger displacement in a strong earthquake. Useful advice and guidance are proposed for engineering application.

Journal of University of Science and Technology Beijing

This journal provides an international medium for the publication of theoretical and experimental studies related to the fields of Mineral, Metallurgy and Materials. Papers dealing with mineral processing, mining, mine safety, environmental pollution and protection of mines, process metallurgy, metallurgical physical chemistry, metals working, structure and physical properties of materials, corrosion and resistance of materials, are viewed as suitable for publication.

The Application of Air-flow to the Technological Process of Chemical Fiber

The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.

Two-dimensional Supramolecular Structure of a Mercury(Ⅱ) Iodide Complex with Organosulfide

A mercury（Ⅱ） iodide complex with organosulfide [Hg（pymt）（pymtH）I] 1 （pymt = the anion of pyrimidine-2-thiolate） has been synthesized by slow evaporation of the solution at room temperature and structurally characterized by single-crystal X-ray diffraction. Basic ideas and data collected are given. X-ray diffraction analysis reveals that complex 1 is mononuclear. Crystallographic data： C8H7HgIN4S2, Mr = 550.79, monoclinic system, space group P21/c, a = 11.218（4）, b = 9.551（3）, c = 15.877（4） A^°, β = 129.697（15）°, V = 1308.9（7） A^°^3, Z = 4, Mr = 550.79, Dc = 2.795 g/cm^3, F（000） = 995, μ（MoKa） = 14.415 mm^-1, 2（MoKa） = 0.71073 A^°, T= 293（2） K, 2θmax = 54.9°, GOOF= 1.053, the final R = 0.0310 and wR = 0.0742 for 2547 observed reflections with I 〉 2σ（I） （refinement on F^2）. Complex 1 is connected through hydrogen bonds to give a one-dimensional supramolecular chain structure. Furthermore, π-π interactions are also found between the pyrimidine rings with the center-to-center distances of 3.439（4） and 3.603（4） A^°, so complex 1 expands the chains into a two-dimensional network.

Study on the Mercury （11） Complex of 4,5-benzol,2-dithiole-3-thione by IR, Theoricaly and X-Ray

A mercury （II） complex with 4.5-benzo-1.2-dithiol-3-thione （C7H4S3） （1）, [Hg2I4（C7H4S3）2] （2） was synthesized. The structure of the obtained complex （2） was characterized by crystallography, Infrared Spectroscopy （IR） analysis and theoretical study. The complex （2） has a dimeric structure, where each mercury atom takes a tetrahedral geometry and is coordinated by two bridging chloride, one terminal chloride and one thiocarbonyl sulfur atom （C=S） of the ligand.

The Colour Reaction of Mercury with 1-(6-Ethoxyl-2-benzothiazolyl)-3-(4-Nitrophenyl)-Triazene and its Application

A new triazene reagent 1-(6-ethoxyl-2-benzothiazolyl)-3-(4-nitrophenyl)-triazene (EtOBThTPT) has been synthesized. The colour reaction of EtOBTNPT with Hg(II) has been studied. At pH = 10.1-10.7, in the presence of Triton X-100, the reagent with Hg(II) forms an orange-yellow complex with high sensitivity. The molar absorptivity is 2.38 X 10(5) L.mol(-1).cm(-1). Beer's law is obeyed for Hg(II) in the range of 0-7 mu g/25 ml.