Factors influencing pore-pressure prediction in complex carbonates based on effective medium theory

A calculation model based on effective medium theory has been developed for predicting elastic properties of dry carbonates with complex pore structures by integrating the Kuster-Toksǒz model with a differential method.All types of pores are simultaneously introduced to the composite during the differential iteration process according to the ratio of their volume fractions.Based on this model,the effects of pore structures on predicted pore-pressure in carbonates were analyzed.Calculation results indicate that cracks with low pore aspect ratios lead to pore-pressure overestimation which results in lost circulation and reservoir damage.However,moldic pores and vugs with high pore aspect ratios lead to pore-pressure underestimation which results in well kick and even blowout.The pore-pressure deviation due to cracks and moldic pores increases with an increase in porosity.For carbonates with complex pore structures,adopting conventional pore-pressure prediction methods and casing program designs will expose the well drilling engineering to high uncertainties.Velocity prediction models considering the influence of pore structure need to be built to improve the reliability and accuracy of pore-pressure prediction in carbonates.

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation(absorption)

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.

Optimal design of sub-wavelength metal rectangular gratings for polarizing beam splitter based on effective medium theory

A novel optimal design of sub-wavelength metal rectangular gratings for the polarizing beam splitter （PBS） is proposed. The method is based on effective medium theory and the method of designing single layer antireflection coating. The polarization performance of PBS is discussed by rigorous couple-wave analysis （RCWA） method at a wavelength of 1550 nm. The result shows that sub-wavelength metal rectangular grating is characterized by a high reflectivity, like metal films for TE polarization, and high transmissivity, like dielectric films for TM polarization. The optimal design accords well with the results simulated by RCWA method.

Slip effects on shearing flows in a porous medium

This paper deals with the magnetohydrodynamic （MHD） flow of an Oldroyd 8-constant fluid in a porous medium when no-slip condition is no longer valid. Modified Darcy＇s law is used in the flow modelling. The non-linear differential equation with non-linear boundary conditions is solved numerically using finite difference scheme in combination with an iterative technique. Numerical results are obtained for the Couette, Poiseuille and generalized Couette flows. The effects of slip parameters on the velocity profile are discussed.

Effective Medium Approximation for Nonlinear Composite Media

We build the perturbation expansion method for nonlinear composite media and extend the EMA for nonlinear effective conductivity. Using the solutions of boundary-value problems of a cylindrical in- clusion, we derive formulae for nonlinear effective conductivity.

A novel binary effective medium model to describe the prepeak stressstrain relationship of combined bodies of rock-like material and rock

Combined bodies of rock-like material and rock are widely encountered in geotechnical engineering,such as tunnels and mines.The existing theoretical models describing the stress-strain relationship of a combined body lack a binary feature.Based on effective medium theory,this paper presents the governing equation of the“elastic modulus”for combined and single bodies under triaxial compressive tests.A binary effective medium model is then established.Based on the compressive experiment of concretegranite combined bodies,the feasibility of determining the stress threshold based on crack axial strain is discussed,and the model is verified.The model is further extended to coal-rock combined bodies of more diverse types,and the variation laws of the compressive mechanical parameters are then discussed.The results show that the fitting accuracy of the model with the experimental curves of the concretegranite combined bodies and various types of coal-rock combined bodies are over 95%.The crack axial strain method can replace the crack volumetric strain method,which clarifies the physical meanings of the model parameters.The variation laws of matrix parameters and crack parameters are discussed in depth and are expected to be more widely used in geotechnical engineering.

Numerical investigation of Dufour and Soret effects on unsteadyMHD natural convection flow past vertical plate embedded innon-Darcy porous medium

The Dufour and Soret effects on the unsteady twodimensional magnetonyaro dynamics （MHD） doublediffusive free convective flow of an electrically conducting fluid past a vertical plate embedded in a nonDarcy porous medium are investigated numeri cally. The governing nonlinear dimensionless equations are solved by an implicit finite difference scheme of the CrankNicolson type with a tridiagonal matrix manipulation. The effects of various parameters entering into the problem on the unsteady dimension less velocity, temperature, and concentration profiles are studied in detail. Furthermore, the time variation of the skin friction coefficient, the Nusselt number, and the Sherwood number is presented and analyzed. The results show that the unsteady velocity, tem perature, and concentration profiles are substantially influenced by the Dufour and Soret effects. When the Dufour number increases or the Soret number decreases, both the skin friction and the Sherwood number decrease, while the Nusselt number increases. It is found that, when the magnetic parameter increases, the velocity and the temperature decrease in the boundary layer.

New assembly route for three-dimensional metamaterials obtained through effective medium theory

In this study, we illustrate the effective medium theories in the designs of three-dimensional composite metama- terials of both negative permittivity and negative permeability. The proposed metamaterial consists of random coated spheres with sizes smaller compared to the wavelength embedded in a dielectric host. Simple design rules and formulas following the effective medium models are numerically and analytically presented. We demonstrate that the revised Maxwell-Garnett effective medium theory enables us to design three-dimensional composite metamaterials through the assembly of coated spheres which are random and much smaller than the wavelength of the light. The proposed ap- proach allows for the precise control of the permittivity and the permeability and guides a facile, flexible, and versatile way for the fabrication of composite metamaterials.

The Importance of Cultural Intelligence for Leader to Communicate Effectively: Case Study in Micro Small Medium Enterprises

Micro Small Medium Enterprises (MSMEs) in Indonesia play huge part of national economic development because MSMEs can reduce unemployment rate. But, it is not easy to manage MSMEs well so it can be sustainable. There are some reasons why MSMEs are difficult to sustain, i.e., good management people by communicate effectively. Authors believe that one of important ability that owners, as a leader, must have in order to communicate effectively is cultural intelligence. Even in MSMEs, cultural intelligence plays important part because employees in MSMEs are diverse. They come from different region (mean having different tradition) and have different level of education. Methodology that is used in this article is qualitative method, and techniques of data collection are interview and observation. Technique of choosing informant is purposive and convenience while data analysis is using content analysis. The result of this study shows that leaders in MSMEs already have cultural intelligence to communicate with their employee. Leaders who have cultural intelligence can choose right method to communicate effectively with their employee.

Effects of Solid Matrix and Porosity of Porous Medium on Heat Transfer of Marangoni Boundary Layer Flow Saturated with Power-Law Nanofluids

The effect of the solid matrix and porosity of the porous medium are first introduced to the study of power-law nanofluids, and the Marangoni boundary layer flow with heat generation is investigated. Two cases of solid matrix of porous medium including glass balls and aluminum foam are considered. The governing partial differential equations are simplified by dimensionless variables and similarity transformations, and are solved numerically by using a shooting method with the fourth-fifth-order Runge-Kutta integration technique. It is indicated that the increase of the porosity leads to the enhancement of heat transfer in the surface of the Marangoni boundary layer flow.

A PRIMARY OBSERVATION OF TPA EFFECT ON SSV-NIH3T3 CELLS IN SERUM-FREE MEDIUM

The effect of TPA, a potent tumor promoter, on SSV-NIH3T3 cells in serum-free medium was investigated. TPA stimulated DNA synthesis of SSV-NIH3T3 cells on the third day of culture in SFM. In SDS-PAGF of medium conditioned by TPA-treated SSV-NIH3T3 cells (in SFM+TPA), the amounts of four proteins of 31.0 Kd, 28.5 Kd, 25.5 Kd and 13.5 Kd strikingly increased over that of non-TPA-treated counterpart (in SFM). The PDGF-like activity was also detected in CM of SFM+TPA. When insulin and EGF were drown off the SFM+TPA (SFM-Ins-EGF+TPA), TPA lost its ability to stimulate DNA synthesis of SSV-NIH3T3 cells on the third day and SDS-PAGE of the conditioned medium showed that the amounts of the four proteins noted above grately reduced. However, cells in SFM-Ins-EGF+TPA were in almost the same growth condition as cells in complete SFM+TPA on the third day of culture. Results were discussed in the paper.

Standard Gibbs Energies of Transfer for KBPh_4 from Water to Water+PrOH and Water+TBA Mixtures and the Primary Medium Effects

The standard Gibbs energies of transfer (Δ tr G 0) for potassium tetraphenylborate (KBPh 4) have been studied in the systems of water and water +1 propanol (PrOH) as well as water and water + t butyl alcohol (TBA) at 298.15?K. The results show that -Δ tr G 0 exhibits a complicated changing pattern with the mole fraction of TBA( x (TBA)) or PrOH ( x (PrOH)), and Δ tr G 0 has the a maximum value at x (TBA) = 0.2 or x (PrOH)=0.2. Especially, -Δ tr G 0 of KBPh 4 changes unusually with increasing x (TBA) when x (TBA) < 0.05. The reasons for these changes were analyzed and discussed.

Effects of Medium Energy Ion Beam in Implantation and Penetration on Germination and Growth of Wheat Seeds

Ｅｆｆｅｃｔｓ ｏｆ Ｍｅｄｉｕｍ Ｅｎｅｒｇｙ Ｉｏｎ Ｂｅａｍ ｉｎ Ｉｍｐｌａｎｔａｔｉｏｎ ａｎｄ Ｐｅｎｅｔｒａｔｉｏｎ ｏｎ Ｇｅｒｍｉｎａｔｉｏｎ ａｎｄ Ｇｒｏｗｔｈ ｏｆ Ｗｈｅａｔ Ｓｅｅｄｓ￥ＸｉｅＨｏｎｇｍｅｉ；ＷｅｉＺｅｎｇ...

Bistability in a Hybrid Optomechanical System under the Effect of a Nonlinear Medium

We investigate a hybrid optomechanical system consisting of two coupled cavities, one of them is composed of two-end fixed mirrors （called the traditional cavity）, and the other has a one-end oscillating mirror （named as the optomechanical cavity）. A Kerr medium is inside the traditional cavity to enhance the nonlinearity due to the fact that it can cause observing of bistable behavior in intracavity intensity for the optomechanical cavity. The Hamiltonian of the system is written in a rotating frame and its dynamics is described by quantum Langevin equations of motion. Our proposed system exhibits unconventional plots for the mean photon number of the optomechanical cavity which are not observed in previous works. The present results show a deep effect of the Kerr medium on optical bistability of intracavity intensity for the optomechanical cavity. Also, coupling strength of the cavities can effectively change the stability of the system.

Bystander effects induced by medium from carbon-ion-irradiated human cancer cells

The bystander effects induced by medium from human hepatoma SMMC-7721 and adenocarcinoma F56 cells irradiated with carbon ions were investigated. It was found that the survival fraction (SF) of the irradiated cells decreased exponentially along with the increased dose. SMMC-7721 cells were more radiosensitive than F56 cells. The plating efficiency (PE) of the non-irradiated cells treated with irradiated conditioned medium (ICM) was obvi-ously lower than the PE of control cells for SMMC-7721 cells but not for F56 cells. Moreover, the reduced PE and SF by ICM treatment were more significant for 1Gy irradiation than for 6Gy irradiation on SMMC-7721 cells. These results suggest that the irradiated cells can secrete factor(s) into medium that is cytotoxic to bystander non-irradiated cells. The bystander effects are dependent on cell genotype presented at the time of irradiation and radiation dose. This makes impact on the precise estimation of the effects of radiation and tumor radiotherapy.

Unconventional Medium Effect in K^+ Scattering From ~6Li,^(12)C,^(28)Si and ^(40)Ca

The results of comprehensive microscopic optical model calculations are pres-ented for the K+ scattering from 6Li,12C,28Si and 40Ca at incident momenta 400-800MeV/c.The unconventional medium effect （i.e.the density-dependent correction forthe K+-nucleon scattering amplitude） is considered in two approaches.Both results arein agreement with recent experimental data.The influence of the correction on K+ scat-tering from different nuclei are discussed in detail and only a weak dependence of thein-medium nucleon“swelling”effects on the mass number of target nuclei is found ex-cept for very light loosely-bound nucleus.

Nuclear in-medium effects on η dynamics in proton–nucleus collisions

The dynamics of the η meson produced in proton-induced nuclear reactions via the decay of N*(1535)has been investigated within the Lanzhou quantum molecular dynamics transport model.The in-medium modifications of the η production in dense nuclear matter are included in the model,in which an attractive η-nucleon potential is implemented.The impact of the η optical potential on the η dynamics is investigated.It is found that the attractive potential leads to the reduction in high-momentum(kinetic energy) production from the spectra of momentum distributions and inclusive cross sections and increasing the reabsorption process by surrounding nucleons.

Theoretical study on the effective thermal conductivity of silica aerogels based on a cross-aligned and cubic pore model

Aerogel nanoporous materials possess high porosity, high specific surface area, and extremely low density due to their unique nanoscale network structure. Moreover, their effective thermal conductivity is very low, making them a new type of lightweight and highly efficient nanoscale super-insulating material. However, prediction of their effective thermal conductivity is challenging due to their uneven pore size distribution. To investigate the internal heat transfer mechanism of aerogel nanoporous materials, this study constructed a cross-aligned and cubic pore model(CACPM) based on the actual pore arrangement of SiO_(2) aerogel. Based on the established CACPM, the effective thermal conductivity expression for the aerogel was derived by simultaneously considering gas-phase heat conduction, solid-phase heat conduction, and radiative heat transfer. The derived expression was then compared with available experimental data and the Wei structure model. The results indicate that, according to the model established in this study for the derived thermal conductivity formula of silica aerogel, for powdery silica aerogel under the conditions of T = 298 K, a_(2)= 0.85, D_(1)= 90 μm, ρ = 128 kg/m^(3), within the pressure range of 0–10^(5)Pa, the average deviation between the calculated values and experimental values is 10.51%. In the pressure range of 10^(3)–10^(4)Pa, the deviation between calculated values and experimental values is within 4%. Under these conditions, the model has certain reference value in engineering verification. This study also makes a certain contribution to the research of aerogel thermal conductivity heat transfer models and calculation formulae.

Study on Effect of Iron in Anther Media of Early Japonica Rice in Cold Region

In this study, through vitro culturing anthers of 7 F1 progenies of early Japonica rice in cold region on medium with different Fe2+ contents, it was found that Fe2+ content generated greater impacts on the induction rate and green plantlet differentiation. The result demonstrated that if Fe2+ increased from 32 to 40 mg/kg, the induction rate of early Japonica rice anther culture in N6 culture media was more then 1.4 times higher than that in N6 culture media containing 5.6 mg/kg Fe2+. In this concentration range, the induction rate increased with the increase of Fe2+ content, while if the concentration was over this concentration range, the induction rate decreased with the increase of Fe2+, showing single peak distribution. When the Fe2+ was 40 mg/kg in differentiation medium, the differentiation rate decreased dramatically. The green plantlet differentiations of callus which were induced on culture media containing 32-40 mg/kg Fe2+ were different, when they were cultured on MS culture media, and 85.7% materials could increase green plantlet productivity to about 7.8%. Therefore, increasing Fe2+in induction media properly could increase anther culture efficiency of early Japonica rice in cold region.

Slip flow of Maxwell viscoelasticity-based micropolar nanoparticles with porous medium: a numerical study

This article presents the mass and heat transport aspects in viscoelastic nanofluid flows under the presence of velocity slip conditions. To explore the nonNewtonian behavior, a Maxwell viscoelasticity-based micropolar is considered. Moreover, a porous medium saturates the stretching sheet. A set of similarity variables is introduced to derive the dimensionless ordinary differential equations of velocity, concentration, and temperature profiles. The numerical solution is computed by using the MATLAB bvp4c package. The salient flow features of velocity, concentration, and temperature profiles are described and discussed through various graphs. It is observed that with an increase in the slip parameter, the micro-rotation velocity also increases. The temperature of nanoparticles gets maximum values by varying the viscoelastic parameter and the porosity parameter while an opposite trend is noted for the micro-rotation parameter. The local Nusselt number and the local Sherwood number increase by increasing the viscoelastic parameter, the porosity parameter, and the slip velocity parameter. The graphical computation is performed for a specified range of parameters, such as 0 ≤ M ≤ 2.5, 0 ≤σm ≤ 2.5, 0 ≤ K1 ≤ 1.5, 0.5 ≤ Pr ≤ 3.0, 0 ≤σ≤ 1.5, 0.5 ≤ Sc ≤ 2.0, 0.2 ≤ Nb ≤ 0.8, and 0.2 ≤ Nt ≤ 0.8.