In order to study the slagging characteristics of boiler combustion liners during pulverized coal stream combustion, the slag samples on the surface of combustion liner were investigated by X-ray diffractometry, scan ...In order to study the slagging characteristics of boiler combustion liners during pulverized coal stream combustion, the slag samples on the surface of combustion liner were investigated by X-ray diffractometry, scan electron microscopy and energy dispersive X-ray analysis, and the transformation characteristics of the compositions and crystal phases were studied. The results show that the size of slag granules decreases as the slagging temperature increases; the crystallinity of coal ash I reduces to about 48.6% when the temperature is increased up to 1 350 ℃, and that of the coal ash II reduces to about 65% when the temperature is increased up to 1 500 ℃; the encroachment of molten coal ash to the combustion liner is strengthened. At the same time, the diffusion and the segregation of the compositions in combustion liners have selectivity, which is in favor of enhancing the content of crystal phases, weakening the conglutination among molten slag compositions and combustion liner, and avoiding yielding big clinkers. But the diffusion of the compositions in combustion liners increases the porosity and decreases the mechanical intensity of combustion liner, and makes the slag encroachment to the liner become more serious.展开更多
To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, ...To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air. The effects of A1203, SiO2, kaolin, dry powder and bentonite on ash fusibility temperatures were studied, based upon the relationship between briquette ash components and ash fusibility. The results show that the increasing of ash fusibility temperatures by adding the same amount （11%, w） of refractory agents follows the sequence of SiO2, bentonite, dry powder, kaolin, A1203, with the softening temperatures being elevated by 37.2, 57.6, 60.4, 82.6 and 104.4℃. With the same ratio of SIO2/A1203 in briquette, adding the A1203 component is more effective than SiO2 for raising ash fusibility temperatures. In this paper, inexpensive kaolin and bentonite rich in A1203 are found to be better refractory agents, and the suitable adding quantities are 9% and 11%, respectively.展开更多
基金Project(50576005) supported by the National Natural Science Foundation of China
文摘In order to study the slagging characteristics of boiler combustion liners during pulverized coal stream combustion, the slag samples on the surface of combustion liner were investigated by X-ray diffractometry, scan electron microscopy and energy dispersive X-ray analysis, and the transformation characteristics of the compositions and crystal phases were studied. The results show that the size of slag granules decreases as the slagging temperature increases; the crystallinity of coal ash I reduces to about 48.6% when the temperature is increased up to 1 350 ℃, and that of the coal ash II reduces to about 65% when the temperature is increased up to 1 500 ℃; the encroachment of molten coal ash to the combustion liner is strengthened. At the same time, the diffusion and the segregation of the compositions in combustion liners have selectivity, which is in favor of enhancing the content of crystal phases, weakening the conglutination among molten slag compositions and combustion liner, and avoiding yielding big clinkers. But the diffusion of the compositions in combustion liners increases the porosity and decreases the mechanical intensity of combustion liner, and makes the slag encroachment to the liner become more serious.
文摘To solve the problem of the low ash fusion point of briquette, this paper reported that the ash fusibility temperatures can be elevated by changing ash ingredients through blending refractory agents in briquette ash, which will create favorable conditions for moving bed continuous gasification of briquette with oxygen-rich air. The effects of A1203, SiO2, kaolin, dry powder and bentonite on ash fusibility temperatures were studied, based upon the relationship between briquette ash components and ash fusibility. The results show that the increasing of ash fusibility temperatures by adding the same amount （11%, w） of refractory agents follows the sequence of SiO2, bentonite, dry powder, kaolin, A1203, with the softening temperatures being elevated by 37.2, 57.6, 60.4, 82.6 and 104.4℃. With the same ratio of SIO2/A1203 in briquette, adding the A1203 component is more effective than SiO2 for raising ash fusibility temperatures. In this paper, inexpensive kaolin and bentonite rich in A1203 are found to be better refractory agents, and the suitable adding quantities are 9% and 11%, respectively.
