Non-isothermal thermal decomposition kinetics of high iron gibbsite ore based on Popescu method

The thermal decomposition kinetics of high iron gibbsite ore was investigated under non-isothermal conditions.Popescu method was applied to analyzing the thermal decomposition mechanism.The results show that the most probable thermal decomposition mechanism is the three-dimensional diffusion model of Jander equation,and the mechanism code is D3.The activation energy and pre-exponential factor for thermal decomposition of high iron gibbsite ore calculated by the Popescu method are 75.36 kJ/mol and 1.51×10-5 s-（-1）,respectively.The correctness of the obtained mechanism function is validated by the activation energy acquired by the iso-conversional method.Popescu method is a rational and reliable method for the analysis of the thermal decomposition mechanism of high iron gibbsite ore.

Assessment of the Stability of Cefazolin Sodium in Solids by TGA Decomposition Kinetics

\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid state in its storage time. This laid a foundation for estimating the relative chemical stability of the drug by determination of its decomposition kinetics using TGA. Although the observed thermal decomposition kinetics of CEZ·Na was complex, a conversion level of 1% was chosen for evaluation of the stability of CEZ·Na crystalline since the mechanism here was more likely to be that of the actual product failure. The evaluation results suggested that the α form of CEZ·Na had the best stability and the amorphous one was the least stable one among α form, dehydrated α form and amorphous form.

Decomposition kinetics of carbon-doped FeCoCrNiMn high-entropy alloy at intermediate temperature

Phase decomposition kinetics and the corresponding mechanical properties of the severe cold-rolled(SCRed) carbon-doped(1.3 at.%) equimolar FeCoCrNiMn high-entropy alloy(HEA) after being annealed at 500 ℃ were investigated. This single face-centered cubic(FCC) solid-solution HEA decomposed to M23 C6+L10, B2, and σ in chronological order. The formation kinetics of the L10, B2, and σ phases followed the Johnson-Mehl-AvramiKolmogorov(JMAK) equation. The yield strength of the HEA was 1520 MPa and increased to 1920 MPa after being annealed at 500 ℃ for 1 h, as a result of the formation of nanosized M23 C6 and L10. Both strength and ductility decreased after 2 d of annealing due to the increase of volume fractions and the coarsening of the M23C6 and L10 precipitates. From 4 to 32 d, the hardness was found to increase, which is ascribed to the rapid formation of the B2 and σ phases. From 32 to 64 d, the hardness increased further to finally reach about HV 760, with the FCC matrix almost exhausted to form the M23 C6, L10, B2, and σ phases. The results of this work may serve as a guide for the heat-treatment of carbon-doped HEAs.

Thermal decomposition kinetics of Algerian Tamazarte kaolinite by thermogravimetric analysis

The decomposition kinetics of Algerian Tamazarte kaolinite(TK)was investigated using thermogravimetric analysis(TG).Differential thermal analysis(DTA)and TG experiments were carried out between room temperature and1400°C,at differentheating rates from10to40°C/min.The activation energies,measured by DTG from isothermal treatments usingJohnson-Mehl-Avrami(JMA)and Ligero methods and by non-isothermal treatments using Ozawa,Boswell and Kissinger methods,were around151and144kJ/mol,respectively.The Avrami parameter of growth morphology(indicating the crystallization mode)was found to be around1.57using non-isothermal treatments;however,when using isothermal treatments it is found to be equal to1.35.The numerical factor,which depends on the dimensionality of crystal growth,is found to be1.53using Matusita equation.Thefrequency factor calculated by the isothermal treatment is equal to1.55×107s-1.The results show that the bulk nucleation is followedby three-dimensional growth of metakaolinite with polyhedron-like morphology controlled by diffusion from a constant number ofnuclei.

Decomposition Kinetics for Formation of CO_2 Hydrates in Natural Silica Sands

The decomposition kinetics for formation of CO2 hydrates in 90 cm 3wet natural silica sands were studied systematically using the depressurization method at the temperatures ranging from 273.2 to 277.2 K and the pressures from 0.5 to 1.0 MPa.The effects of temperature,pressure,particle diameter,porosity,and salinity of formation water on the decomposition kinetics were investigated.The results show that the dissociation percentage increases as temperature increases or as the initial decomposition pressure decreases.An increase in porosity or a decrease in particle diameter of silica sands accelerates the decomposition.Increasing the salinity of the formation water gives rise to a faster decomposition.However,a combination of the present results with the observations in literature reveals that the effect of the coexisting ionic solute depends on its chemical structure.

STUDY ON THERMAL DECOMPOSITION KINETICS OF URUSHIOL METAL CHELATE POLYMERS

The thermal decomposition kinetics of urushiol-Cu, urushiol-Nd and urushiol-Ti chelatepolymers has been studied by non-isothermal thermogravimetry. The results suggest that thethermal decomposition kinetics of three chelate polymers are all of first order. Their averageactivation energy values of the thermal decomposition calculated by Ozawa-(I) method are 110,79, 136. 98 and 163. 64 kJ mol^(-1) respectively, which increase linearly with the metal valence of themetal chelate polymers

Isothermal thermo-analytical study and decomposition kinetics of non-activated and mechanically activated indium tin oxide(ITO) scrap powders treated by alkaline solution

Isothermal decomposition process of chemically transforming indium tin oxide（ITO） powders into indium（III） hydroxide powders was investigated. Two types of powders were analyzed, i.e., non-activated and mechanically activated. It has been found that in the case of activated sample, shorter induction periods appear, which permits growth of smaller crystals, while in the case of non-activated sample, long induction periods appear, characterized by the growth of larger crystals. DAEM approach has shown that decomposition processes of non-activated and mechanically activated samples can be described by contracting volume model with a linear combination of two different density distribution functions of apparent activation energies（Ea）, and with first-order model, with a single symmetrical density distribution function of Ea, respectively. It was established that specific characteristics of particles not only affect the mechanism of decomposition processes, but also have the significant impact on thermodynamic properties.

Synthesis, characterization of monodispersed MgO microspheres and thermal decomposition kinetics of its precusor

Monodispersed MgO microspheres were successfully synthesized by a simple solvothermal method using PEG-400 as solvent. The samples were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The results reveal that the precusor was monoclinic Mg5(CO3)4(OH)2·4H2O and composed of nanosheets with the thickness of about 250 nm. By calcining the precusor at 500 °C for 5 min, cubic MgO with similar morphology was obtained. According to the SEM images, it is found that the volume ratio of PEG-400 to deionized water is considered as a crucial factor in the evolution of the morphology. Based on the SEM images obtained under different experimental conditions, a possible growth mechanism which involves self-assembly process was proposed. The thermal decomposition process of MgO precusor was studied by thermogravimetry-differential thermogravimetry(TG-DTG) at different heating rates in air. Thermal analysis kinetics results show that the most probale mechanism models of MgO precusor are An and D3, respectively. In addition, isothermal prediction was studied to quantitatively characterize the thermal decomposition process.

Preparation and spectroscopic, and thermal decomposition kinetic studies of europium(Ⅲ) complex [Eu(HNBD)_3] (HNBD: 1-(6-hydroxy-1-naphthyl)-1,3-butanedione)

The complex of Eu（IH） with 1-（6-hydroxy- 1-naphthyl）- 1,3-butanedione （HNBD） was prepared for the first time and characterized by elemental analysis, IR, UV, fluorescence spectrum, and DTA-TG-DTG techniques. The IR and UV-visible spectra showed that Eu（Ⅲ） ion was coordinated to the HNBD ligand. The fluorescence spectrum showed the presence of Eu^3＋ characteristic emission. The TG-DTA-DTG curves showed that the thermal decomposition of the anhydrous complex was a two-stage process and the final residue was Eu2O3. The thermal decomposition kinetic parameters of the complex were evaluated from TG-DTG data by using three kinds of integral methods （Coat-Redfem equation, Horowitz and Metzger equation, Madhusudanan-Krishnan-Ninan equation）. The kinetic parameters of the first stage are E^＊ = 164.02 kJ.moll, A = 1.31 × 10^15 s^-l, AS^＊= 42.27 J·K^-l·mol^-l, △H^＊ = 159.51 kJ·mol^-l, △G^＊= 136.54 kJ·mol^-l, and n = 3.1, those of the second stage are E^＊= 128.52 kJ·mol^-l, A = 1.44× 106 s^-1, △S^＊= - 136.89 J·K^-l·mol^-l, △H^＊ = 120.41 kJ·mol^-l, △G^＊= 283.85 kJ·mol^-l, and n = 1.1.

Characterization and Non-isothermal Decomposition Kinetic Analysis of PS/FeNi_3 Nanocomposites

Polystyrene/iron-nickel （PS/FeNi3） nanocomposites were synthesized via an in-situ polymerization route and characterized by XRD,SEM and FTIR. FeNi3 nanoparticles were characterized by TEM and XRD. The pure FeNi3 nanoparticles （100～125 nm） were highly clustered and percolated through the PS matrix. When the content of FeNi3 nanoparticles reached 5 wt%,an interaction between FeNi3 nanoparticles and PS matrix was observed. The thermal decomposition behavior of PS/FeNi3 nanocomposites was investigated by thermal analysis. The activation energies （E） and pre-exponential factors （lnA） were calculated by using Archar method. The results show that the thermal decomposition of pure PS is a one-dimensional diffusion mechanism. A three-dimensional diffusion mechanism appears when FeNi3 nanoparticles incorporate. The E of PS/FeNi3 nanocomposites with different FeNi3 contents is 217.5,225.3,180.6 and 73.0 kJ·mol-1,and the corresponding lnA is 35.6,34.9,27.5 and 10.4 S-1,respectively.

Crystal Structure and Thermal Decomposition Kinetics of 3-Nitro-4-diazo-5-oxygenpyrazole

A novel compound 3-nitro-4-diazo-5-oxypyrazole was synthesized by the nitration of 4-amino-3,5-dinitropyrazole using nitrification agents of fuming nitric acid and trifluoroacetic anhydride. The compound was purified by column chromatography and characterized by IR, NMR, MS and elemental analysis. Two different single crystals obtained by culturing with ethyl acetate as a solvent were measured by X-ray single-crystal diffractometer. The molecular weight of C3HN5O3 is 155.09 and the two crystals belong to monoclinic system, space groups P21/n and P21/c. For 1： a = 5.5007（2）, b = 9.0691（4）, c = 11.4158（4） A, β = 92.710°, V = 568.85 A3, Z = 4, Dc = 1.811 g/cm3, μ = 0.162 mm-1, F（000） = 312 and the final deviation factor is 0.0213. Crystals 1 and 2 have similar unit cell parameters, except that a = 10.1828（12）, b = 5.5925（6）, c = 10.5574（10） A and β = 108.330（4）° in crystal 2. The thermal behavior of the compound was studied by TG-DSC and melting endothermic peak and decomposition exothermic peak are at 425.7 and 534.5 K in DSC curve. The activation energy and pre-exponential factor of the exothermic decomposition reaction of the title compound obtained by Kissinger method and Flynn-Wall-Ozawa method are 50.38 k J/mol, 4.59 × 1022 s^（-1） and 55.89 k J/mol.

Crystal structure and thermal decomposition kinetics of1-(pyridinium-1-yl)propane-(1-methylpiperidinium)bi[bis(trifluoromethanesulfonyl)imide], [PyC_3Pi][NTf_2]_2

The structure of a room temperature asymmetrical dicationic ionic liquid （ADIL）, 1-（pyridinium-l-yl） propane- （1-methylpiperidinium） bi[bis（tfifluoromethanesulfonyl）imide] （[PyC3Pi][NTf2]2）, was studied by the X-ray difo fraction method. Meanwhile, thermal analysis of [PyC3Pi][NTf2]2 was also studied using non-isothermal thermo- gravimetric analysis （TGA）. The title crystal belongs to the triclinic with space group Pi and unit-cell parameters a ： 0.95217 （8） nm, b = 1.05129 （11 ） nm, c = 1.70523 （14） nm, ct = 89,759 （8）°,β = 80.657 （7）°, γ=68.007 （9）°, and F（000） = 792. Thermal stability and thermal decomposition kinetics of the title compound were also investigated using TGA under the atmosphere of highly pure nitrogen. Heating curves at different rates were cor- related with kinetic equations Friedman and ASTM （also called iso-conversion method）. The values of average activation E （kJ·mol^-1 ） and pre-exponential constant lgA are 149.58 kJ. mol- 1 and 8.83, respectively, which were obtained by the two methods. The kinetic model function, activation energy and pre-exponential constant of this reaction using the multivariate non-linear-regression method were f（a） = （1 -a）（1 ＋ 4.1870a）, 151.04 kJ·mol^-1 and 8.81, respectively, which were basically consistent with iso-conversion methods.

Thermal Stability and Thermal Decomposition Kinetics of 1-Butyl-3-methylimidazolium Dicyanamide

Thermal stability and thermal decomposition kinetics of 1-butyl-3-methylimidazolium dicyanamide ([bmin+][N(CN) ]2-) were investigated using both isothermal and non-isothermal thermogravimetric analyses (TGA) under high pure nitrogen as carrier gas. The long-term thermogravimetric studies revealed that the highest temperature used should be 110 °C, at which [bmin+][N(CN)2-] lost less than 10% by mass in 10 hours. The non-isothermal activation energy values determined using Friedman and ASTM methods were (150±13) and (147±2) kJ·mol –1 , respectively. Multivariate non-linear-regression methods showed that expanded Fn and CnB models were the best fit models with highest correlation coefficient of 0.9994, and the apparent activation energies were consistent with iso-conversional methods.

Kinetics of Thermal Decomposition of Lithium Hexafluorophosphate

With on-line coupled thermo-gravimetric technique, the thermal decomposition of analyzer-Fourier transform infrared spectrometer lithium hexafluorophosphate （LiPF6） and its gas evolution at inert environment （H2O〈10 ppm） were studied under both non-isothermal and isothermal conditions. The results showed that the LiPF6 decomposition is a single-stage reaction with LiF as final residue and PF5 as gas product. In addition, its decomposi- tion kinetics was determined as 2D phase boundary movement （cylindrical symmetry） under both non-isothermal and isothermal conditions. Furthermore, the activation energy of LiPF6 decomposition was calculated as 104 and 92 kJ/mol for non-isothermal and isothermal con- ditions, respectively.

Kinetics of decomposition of mullite and corundum in coal fly ash under highly alkaline condition

Decomposition kinetics of mullite and corundum in coal fly ash with highly alkaline solution was studied.The effects of the reaction temperature and reaction time on decomposition rates of mullite and corundum and alumina extraction efficiency were investigated.The results show that increasing reaction temperature and reaction time increases the decomposition rates of mullite and corundum and alumina extraction efficiency,with the decomposition temperature of mullite lower than that of corundum.After 90 min reaction at 220℃,more than 100 g alumina was extracted when recycling 1 L of alkaline solution.The decomposition processes of mullite and corundum corresponded with the shrinking unreacted core model,and the reaction rate was under chemical reaction control,with the activation energies of mullite and corundum being 67.46 and 161.82 kJ/mol,respectively.

Synthesis and Thermal Decomposition Kinetics of the Complex of Samarium p-Methylbenzoate with 1 ,10-Phenanthroline

The complex [Sm（p-MBA）3phen]2 （p-MBA, p-methylbenzoate; phen, 1,10-phenanthroline） was prepared and characterized by elemental analysis, IR and UV spectra. The thermal decomposition process of [Sm（pMBA）3phen]2 was studied under a static air atmosphere by TG-DTG and IR techniques. Thermal decomposition kinetics was investigated employing a newly proposed method, together with the integral isoconversional non-finear method. Meanwhile, the thermodynamic parameters （AH#, △G# and AS#） were also calculated. The lifetime equation at mass-loss of 10% was deduced as In r=-24.7825＋ 18070.43/T by isothermal thermogravimetric analysis.

Thermal Behavior, Non-isothermal Decomposition Reaction Kinetics of Copper(Ⅱ) Salt of 4-Hydroxy-3,5-dinitropyridine and Its Application in Propellant

The thermal behavior and kinetic parameters of the major exothermic decomposition reaction of the title compound in a temperature-programmed mode were studied by means of TG-DTG and DSC. The critical temperature of thermal explosion was calculated. The effect of the title compound on the combustion characteristic of composition modifier double base propellant containing RDX was explored with a strand burner. The results show that the kinetic model function in differential forms, the apparent activation energy(E a) and the pre-exponential factor(A) of the major exothermic decomposition reaction are 3(1-α)[-ln(1-α)] 2/3, 190.56 kJ/mol and 10 13.39 s -1, respectively. The critical temperature of thermal explosion of the compound is 353.08 ℃. The kinetic equation of the major exothermic decomposition process of the title compound at 0.1 MPa could be expressed as dα/dT=10 14.65(1-α)[-ln(1-α)] 2/3 e -2.2920×104/T. As an auxiliary catalyzer, the title compound can help the main catalyzer of lead salt of 4-hydroxy-3,5-dinitropyridine to accelerate the burning rate and reduce the pressure exponent of RDX-CMDB propellant.

Thermal Behavior and Decomposition Kinetics of the Complexes of CuX_2 (X=NO_3, Br, Cl and ClO_4) with 3,3'-Dimethyl-1-(1H-1,2,4-triazol-1-yl)-2-butanone

The thermal behaviors of the complexes of Cu(DMTZB)4X2 (DMTZB=3,3'-dimethyl-1-(1H-1,2,4-triazol-1- yl)-2-butanone, X=NO3 or ClO4) and Cu(DMTZB)2 X2 (X = Br or Cl) in a nitrogen atmosphere were studied un-der the non-isothermal conditions by simultaneous TG-DTG-DSC, EDS and elemental analysis techniques. The re-sults showed that their decomposition proceeded in three different ways mainly depending on the anions in the molecules. The heat effect associated with the decomposition step of DMTZB molecules was also different. The decomposition mechanisms and the kinetic parameters of DMTZB were determined and calculated by jointly using four methods, which showed that its pyrolysis was controlled by D3 mechanism but with different activation ener-gies and pre-exponential factors for different complexes.

Thermal Decomposition and Kinetics of Rigid Polyurethane Foams Derived from Sugarcane Bagasse

Rigid polyurethane foams were fabricated with five kinds of liquefied sugarcane bagasse polyols （LBP）. The foams derived from sugarcane bagasse were investigated by thermogravimetric analysis （TGA）, and the thermal degradation data were analyzed using the Coast-Redfern method and Ozawa method to obtain the reaction order and activation energy. The results indicate that the sugarcane bagasse-foams exhibit an excellent heat-resistant property, whereas their pyrolysis procedures are quite complicated. The reaction as first order only takes place from 250 to 400 ℃, and the pyrolysis activation energies vary from 20 to 140 kJ/mol during the whole pyrolysis process.

Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is （28.795 ± 0.182） kJ/mol （298.15 K）, and the standard molar enthalpy of formation of the title complex is （-2185.43 ± 13.80） kJ/mol （298.15 K）. Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction： an nth-order reaction （Fn） with n=4.28, E1=147.35 kJ/mol, A1=3.63×10^13 s^-1 is followed by a second-order reaction （F2） with E2=212.71 kJ/mol, A2= 1.82 × 10^18 s^-1.