Deblurring,artifact-free optical coherence tomography with deconvolution-random phase modulation

Deconvolution is a commonly employed technique for enhancing image quality in optical imaging methods.Unfortu-nately,its application in optical coherence tomography(OCT)is often hindered by sensitivity to noise,which leads to ad-ditive ringing artifacts.These artifacts considerably degrade the quality of deconvolved images,thereby limiting its effect-iveness in OCT imaging.In this study,we propose a framework that integrates numerical random phase masks into the deconvolution process,effectively eliminating these artifacts and enhancing image clarity.The optimized joint operation of an iterative Richardson-Lucy deconvolution and numerical synthesis of random phase masks(RPM),termed as De-conv-RPM,enables a 2.5-fold reduction in full width at half-maximum(FWHM).We demonstrate that the Deconv-RPM method significantly enhances image clarity,allowing for the discernment of previously unresolved cellular-level details in nonkeratinized epithelial cells ex vivo and moving blood cells in vivo.

Source Quantitative Identification by Reference-Based Cubic Blind Deconvolution Algorithm

The semi-blind deconvolution algorithm improves the separation accuracy by introducing reference information.However,the separation performance depends largely on the construction of reference signals.To improve the robustness of the semi-blind deconvolution algorithm to the reference signals and the convergence speed,the reference-based cubic blind deconvolution algorithm is proposed in this paper.The proposed algorithm can be combined with the contribution evaluation to provide trustworthy guidance for suppressing satellite micro-vibration.The normalized reference-based cubic contrast function is proposed and the validity of the new contrast function is theoretically proved.By deriving the optimal step size of gradient iteration under the new contrast function,we propose an efficient adaptive step optimization method.Furthermore,the contribution evaluation method based on vector projection is presented to implement the source contribution evaluation.Numerical simulation analysis is carried out to validate the availability and superiority of this method.Further tests given by the simulated satellite experiment and satellite ground experiment also confirm the effectiveness.The signals of control moment gyroscope and flywheel were extracted,respectively,and the contribution evaluation of vibration sources to the sensitive load area was realized.This research proposes a more accurate and robust algorithm for the source separation and provides an effective tool for the quantitative identification of the mechanical vibration sources.

融合ResNet18和Deconvolution的输送带横向跑偏检测方法

为精准检测输送带横向跑偏距离和倾斜角度,提出一种融合ResNet18和Deconvolution的输送带横向跑偏检测方法。首先,设计输送带横向跑偏检测系统,给出输送带横向跑偏检测流程。接着,提出融合ResNet18与Deconvolution的输送带边缘和托辊接触特征关键点提取方法,并采用热力图突出关键点,以便于计算跑偏距离及倾斜角度。最后,搭建输送带横向跑偏检测实验平台,并对该检测方法进行相关实验。实验表明,该检测方法可减弱光照、粉尘等干扰影响,平均准确率为95.17%,优于YOLOv5和Maskrcnn LSD算法,满足带式输送机输送带横向跑偏检测精度要求。

Automated Video Generation of Moving Digits from Text Using Deep Deconvolutional Generative Adversarial Network

Generating realistic and synthetic video from text is a highly challenging task due to the multitude of issues involved,including digit deformation,noise interference between frames,blurred output,and the need for temporal coherence across frames.In this paper,we propose a novel approach for generating coherent videos of moving digits from textual input using a Deep Deconvolutional Generative Adversarial Network(DD-GAN).The DDGAN comprises a Deep Deconvolutional Neural Network(DDNN)as a Generator(G)and a modified Deep Convolutional Neural Network(DCNN)as a Discriminator(D)to ensure temporal coherence between adjacent frames.The proposed research involves several steps.First,the input text is fed into a Long Short Term Memory(LSTM)based text encoder and then smoothed using Conditioning Augmentation(CA)techniques to enhance the effectiveness of the Generator(G).Next,using a DDNN to generate video frames by incorporating enhanced text and random noise and modifying a DCNN to act as a Discriminator(D),effectively distinguishing between generated and real videos.This research evaluates the quality of the generated videos using standard metrics like Inception Score(IS),Fréchet Inception Distance(FID),Fréchet Inception Distance for video(FID2vid),and Generative Adversarial Metric(GAM),along with a human study based on realism,coherence,and relevance.By conducting experiments on Single-Digit Bouncing MNIST GIFs(SBMG),Two-Digit Bouncing MNIST GIFs(TBMG),and a custom dataset of essential mathematics videos with related text,this research demonstrates significant improvements in both metrics and human study results,confirming the effectiveness of DD-GAN.This research also took the exciting challenge of generating preschool math videos from text,handling complex structures,digits,and symbols,and achieving successful results.The proposed research demonstrates promising results for generating coherent videos from textual input.

Potential risks of spectrum whitening deconvolution——compared with well-driven deconvolution

Deconvolution is widely used to increase the resolution of seismic data. To compare the resolution ability of conventional spectrum whitening deconvolution to thin layers with that of welldriven deconvolution, a complex sedimentary geological model was designed, and then the simulated seismic data were processed respectively by each of the two methods. The amplitude spectrum of seismic data was almost white after spectrum whitening, but the wavelet resolution was low. The amplitude spectrum after well-driven deconvolution deviated from white spectrum, but the wavelet resolution was high. Further analysis showed that if an actual reflectivity series could not well satisfy the hypothesis of white spectrum, spectrum whitening deconvolution had a potential risk of wavelet distortion, which might lead to a pitfall in high resolution seismic data interpretation. On the other hand, the wavelet after well- driven deconvolution had higher resolution both in the time and frequency domains. It is favorable for high resolution seismic interpretation and reservoir prediction.

SELF-TUNING WEIGHTED MEASUREMENT FUSION WHITE NOISE DECONVOLUTION ESTIMATOR

For the multi-sensor linear discrete time-invariant stochastic systems with correlated measurement noises and unknown noise statistics,an on-line noise statistics estimator is obtained using the correlation method.Substituting it into the optimal weighted fusion steady-state white noise deconvolution estimator based on the Kalman filtering,a self-tuning weighted measurement fusion white noise deconvolution estimator is presented.By the Dynamic Error System Analysis(DESA) method,it proved that the self-tuning fusion white noise deconvolution estimator converges to the steady-state optimal fusion white noise deconvolution estimator in a realization.Therefore,it has the asymptotically global optimality.A simulation example for the tracking system with 3 sensors and the Bernoulli-Gaussian input white noise shows its effectiveness.

A predictive deconvolution method for non-white-noise refl ectivity

Conventional predictive deconvolution assumes that the reflection coefficients of the earth conform to an uncorrelated white noise sequence. The Wiener-Hopf (WH) equation is constructed to solve the filter and eliminate the correlated components of the seismic records, attenuate multiples, and improve seismic resolution. However, in practice, the primary refl ectivity series of fi eld data rarely satisfy the white noise sequence assumption, with the result that the correlated components of the primary reflectivity series are also eliminated by traditional deconvolution. This results in signal distortion. To solve this problem, we have proposed an improved method for deconvolution. First, we estimated the wavelet correlation from seismic records using the spectrum-modeling method. Second, this wavelet autocorrelation was used to construct a new autocorrelation function which contains the correlated components caused by the existence of multiples and avoids the correlated components of the primary reflectivity series. Finally, the new autocorrelation function was brought into the WH equation, and the predictive fi lter operator was calculated for deconvolution. In this paper, we have applied this new method to simulated and field data processing, and we have compared its performance with that of traditional predictive deconvolution. Our results show that the new method can adapt to non-white refl ectivity series without changing the statistical characteristics of the primary reflection coefficient series. Compared with traditional predictive deconvolution, the new method reduces processing noise and improves fidelity, all while maintaining the ability to attenuate multiples and enhance seismic resolution.

Nonstationary inversion-based directional deconvolution of airgun array signature

Airgun arrays are widely used in marine seismic exploration because signatures excited by airgun arrays have high energy and high-peak bubble ratio, whereas the considerable length and width of the array and ghost reflections make the airgun array signature directional. As a result, the relation of the reflection amplitude with the incident and azimuth angles is variable. This means that the directivity of the airgun array results in a nonstationary wavelet and distorts the relation of the amplitude variation with the incident and azimuth angles. To remove the directivity effect, we propose a nonstationary inversion-based directional deconvolution. At fi rst, the signature as a function of take-off angle and azimuth angle is calculated using the spatial configuration of the airgun array and the near-field signatures. Then, based on the velocity model, the time-variant take-off angles are estimated and directional fi lters are designed using the take-off angles. Finally, the directivity-dependent signatures are shaped to the signature right below the airgun array using nonstationary inversion in the directional deconvolution.

Resolution Enhancement in Ultrasonic TOFD Imaging by Combining Sparse Deconvolution and Synthetic Aperture Focusing Technique(Sparse-SAFT)

The shallow subsurface defects are difficult to be identified and quantified by ultrasonic time-of-flight diffraction(TOFD)due to the low resolution induced by pulse width and beam spreading.In this paper,Sparse-SAFT is proposed to improve the time resolution and lateral resolution in TOFD imaging by combining sparse deconvolution and synthetic aperture focusing technique(SAFT).The mathematical model in the frequency domain is established based on the l1 and l2 norm constraints,and the optimization problem is solved for enhancing time resolution.On this basis,SAFT is employed to improve lateral resolution by delay-and-sum beamforming.The simulated and experimental results indicate that the lateral wave and tip-diffracted waves can be decoupled with Sparse-SAFT.The shallow subsurface defects with a height of 3.0 mm at the depth of 3.0 mm were detected quantitatively,and the relative measurement errors of flaw heights and depths were no more than 10.3%.Compared to conventional SAFT,the time resolution and lateral resolution are enhanced by 72.5 and 56%with Sparse-SAFT,respectively.Finally,the proposed method is also suitable for improving resolution to detect the defects beyond dead zone.

H-infinity deconvolution filtering:a Krein space approach in state-space setting

This note is concerned with the H-infinity deconvolution filtering problem for linear time-varying discretetime systems described by state space models, The H-infinity deconvolution filter is derived by proposing a new approach in Krein space. With the new approach, it is clearly shown that the central deconvolution filter in an H-infinity setting is the same as the one in an H2 setting associated with one constructed stochastic state-space model. This insight allows us to calculate the complicated H-infinity deconvolution filter in an intuitive and simple way. The deconvolution filter is calculated by performing Riccati equation with the same order as that of the original system.

On the Circulant and Aperiodic Models of Deconvolution

The popularly used circulant matrix model of deconvolution is mostly heavily ill-posed or singular and it is not suitable to many blind deconvolution problems. The aperiodic matrix model can improve the condition number of deconvolution problems and its accommodation is much wider than the circulant one's. This paper discusses a comparison of the two models including their ill-posedness, the rationality of the approximation by the models, and their computational efficiency. The comparison shows that the aperiodic model is promising in the development of new restoration algorithms.

A New Fast Iterative Blind Deconvolution Algorithm

Successful blind image deconvolution algorithms require the exact estimation of the Point Spread Function size, PSF. In the absence of any priori information about the imagery system and the true image, this estimation is normally done by trial and error experimentation, until an acceptable restored image quality is obtained. This paper, presents an exact estimation of the PSF size, which yields the optimum restored image quality for both noisy and noiseless images. It is based on evaluating the detail energy of the wave packet decomposition of the blurred image. The minimum detail energies occur at the optimum PSF size. Having accurately estimated the PSF, the paper also proposes a fast double updating algorithm for improving the quality of the restored image. This is achieved by the least squares minimization of a system of linear equations that minimizes some error functions derived from the blurred image. Moreover, a technique is also proposed to improve the sharpness of the deconvolved images, by constrained maximization of some of the detail wavelet packet energies. Simulation results of several examples have verified that the proposed technique manages to yield a sharper image with higher PSNR than classical approaches.

New Regularization Algorithms for Solving the Deconvolution Problem in Well Test Data Interpretation

Two new regularization algorithms for solving the first-kind Volterra integral equation, which describes the pressure-rate deconvolution problem in well test data interpretation, are developed in this paper. The main features of the problem are the strong nonuniform scale of the solution and large errors (up to 15%) in the input data. In both algorithms, the solution is represented as decomposition on special basic functions, which satisfy given a priori information on solution, and this idea allow us significantly to improve the quality of approximate solution and simplify solving the minimization problem. The theoretical details of the algorithms, as well as the results of numerical experiments for proving robustness of the algorithms, are presented.

Study on the Deconvolution Method and Processing Flow of Airgun Source Data

With its high repeatability,the airgun source has been used to monitor the temporal variations of subsurface structures. However,under different working conditions,there will be subtle differences in the airgun source signals. To some extent,deconvolution can eliminate changes of the recorded signals due to source variations. Generally speaking,in order to remove the airgun source wavelet signal and obtain the Green's functions between the airgun source and stations,we need to select an appropriate method to perform the deconvolution process for seismic waveform data. Frequency domain water level deconvolution and time domain iterative deconvolution are two kinds of deconvolution methods widely used in the field of receiver functions,etc. We use the Binchuan( in Yunnan Province,China) airgun data as an example to compare the performance of these two deconvolution methods in airgun source data processing. The results indicate that frequency domain water level deconvolution is better in terms of computational efficiency;time domain iterative deconvolution is better in terms of the signal-to-noise ratio( SNR),and the initial motion of P-wave is also clearer. We further discuss the sequence issue of deconvolution and stack for multiple-shot airgun data processing. Finally,we propose a general processing flow for the airgun source data to extract the Green 's functions between the airgun source and stations.

Combination of Tilt-Angle and Euler Deconvolution Approaches to Determine Structural Features from Aeromagnetic Data Modeling over Akonolinga-Loum Area (Centre-East, Cameroon)

Aeromagnetic data for center-east Cameroon between the latitudes 3.5° to 4.5°N and longitudes 12° to 12.5°E are used to further study the subsurface area of this part of the geological Province of Central Africa and the Congo Craton. The GIS and GEOSOFT v6.5 softwares are used to treat the data. This analysis enabled us to explore our study area from surface right to the base. The Tilt Angle method is used to delineate geological structures and to estimate the depth. The Euler’s deconvolution method is used to estimate the specific depth of structural contacts. We estimate the northern boundary of the Congo Craton and southern boundary of the Pan-African starting from 3°7'N of West to 3°75'N of East. Its depth is estimated around 2.6 km for deep and 0.1 km for shallow while the direction is WSW-ENE and the NW slope varies from 30° to 60°. We obtain that main and minor lineaments exist throughout, from the surface to the base of the area with their principal direction being SW-NE. We also obtain the vertical gradient contact and the quasihorizontal contact. This is proof of the subduction of the Pan-African belt under the Congo Craton due to the intense collision which caused the rejuvenation of the crust. The main consequence of this collision is the formation of pudding and fold structures, beginning from the superficial part right to the base and which caused the intrusion of schistose, chlorite-schist, quartzite in the micaschist and the intrusions of gneiss and garnetiferous schist in the migmatite. In our study, we highlight the presence of 37 major and 523 minor lineaments that localize the circulation of minerals. The probable slope of the lineaments in the northern part of the region varies from 30° to 60° in a SE direction while in the southern part, and it varies from 30° to 60° in a NW direction.

An improved deconvolution method for X-ray coded imaging in inertial confinement fusion

In inertial confinement fusion （ICF）, X-ray coded imaging is considered as the most potential means to diagnose the compressed core. The traditional Richardson-Lucy （RL） method has a strong ability to deblur the image where the noise follows the Poisson distribution. However, it always suffers from over-fitting and noise amplification, especially when the signal-to-noise ratio of image is relatively low. In this paper, we propose an improved deconvolution method for X-ray coded imaging. We model the image data as a set of independent Gaussian distributions and derive the iterative solution with a maximum-likelihood scheme. The experimental results on X-ray coded imaging data demonstrate that this method is superior to the RL method in terms of anti-overfitting and noise suppression.

Deconvolution techniques for characterizing indoor UWB wireless channel

A deconvolution algorithm is proposed to account for the distortions of impulse shape introduced by propagation process. By finding the best correlation of the received waveform with the multiple templates, the number of multipath components is reduced as the result of eliminating the ＂phantom paths＂, and the captured energy increases. Moreover, it needs only a single reference measurement in real measurement environment （do not need the anechoic chamber）, which by far simplifies the templates acquiring procedure.

Multiscale anisotropic diffusion for ringing artifact suppression in geophysical deconvolution data

Ringing artifact degradations always appear in the deconvolution of geophysical data. To address this problem, we propose a postprocessing approach to suppress ringing artifacts that uses a novel anisotropic diffusion based on a stationary wavelet transform （SWT） algorithm. In this paper, we discuss the ringing artifact suppression problem and analyze the characteristics of the deconvolu- tion ringing artifact. The deconvolution data containing ringing artifacts are decomposed into different SWT sub- bands for analysis, and a new multiscale adaptive aniso- tropic filter is developed to suppress these degradations. Finally, we demonstrate the performance of the proposed method and describe the experiments in detail.

PERFORMANCE OF BLIND DECONVOLUTION IN OPTOACOUSTIC TOMOGRAPHY

In this paper,we consider the use of blind deconvolution for optoacoustic(photoacoustic)imaging and investigate the performance of the method as means for increasing the resolution of the reconstructed image beyond the physical restrictions of the system.The method is demonstrated with optoacoustic measurement obtained from six-day-old mice,imaged in the near-infrared using a broadband hydrophone in a circular scanning configuration.Wefind that estimates of the unknown point spread function,achieved by blind deconvolution,improve the resolution and contrast in the images and show promise for enhancing optoacoustic images.

Fourier Self-deconvolution Using Approximation Obtained from Frequency Domain Wavelet Transform as a Linear Function

A new method of resolving overlapped peak, Fourier self-deconvolution （FSD） using approximation CN obtained from frequency domain wavelet transform of F（ω） yielded by Fourier transform of overlapped peak signals f（t） as the linear function, was presented in this paper. Compared with classical FSD, the new method exhibits excellent resolution for different overlapped peak signals such as HPLC signals, and have some characteristics such as an extensive applicability for any overlapped peak shape signals and a simple operation because of no selection procedure of the linear function. Its excellent resolution for those different overlapped peak signals is mainly because F（ω） obtained from Fourier transform of f（t） and CN obtained from wavelet transform of F（ω） have the similar linearity and peak width. The effect of those fake peaks can be eliminated by the algorithm proposed by authors. This method has good potential in the process of different overlapped peak signals.