Blind Decorrelating Detection Based on Particle Swarm Optimization under Spreading Code Mismatch

A way of resolving spreading code mismatches in blind multiuser detection with a particle swarm optimization （PSO） approach is proposed. It has been shown that the PSO algorithm incorporating the linear system of the decorrelating detector, which is termed as decorrelating PSO （DPSO）, can significantly improve the bit error rate （BER） and the system capacity. As the code mismatch occurs, the output BER performance is vulnerable to degradation for DPSO. With a blind decorrelating scheme, the proposed blind DPSO （BDPSO） offers more robust capabilities over existing DPSO under code mismatch scenarios.

Seasonal gravity changes estimated from GRACE data

Since 2002, the GRACE program has provided a large amount of high-precision data, which can be used to detect temporal gravity variations related to global mass re-distribution inside the fluid envelop of the surface of the Earth. In order to make use of the GRACE data to investigate earthquake-related gravity changes in China, we first studied the degree variances of the monthly GRACE gravity field models, and then applied decorrelation and Gaussian smoothing method to obtain seasonal gravity changes in China. By deducting the multi-year mean seasonal variations from the seasonal maos,we found some earthouake-related gravity anomalies.

High sidelobe effects on interferometric coherence for circular SAR imaging geometry

The coherence is a measure for the accuracy of the interferometric phase, and the synthetic aperture radar （SAR） inter- ferometric coherence is affected by several sources of the decor- relation noise. For the circular SAR （CSAR） imaging geometry, the system response function is in the form of the Bessel function which brings a high sidelobe, and the high sidelobe of CSAR will be an important factor influencing the interferometric coherence. The effect of the high sidelobe on the coherence is analyzed and deduced. Based on the interferometric characteristics of the slight difference in the viewing angles and the potential pixel off- set in the interferometric SAR （InSAR） images, a relation between the radar impulse response and the coherence loss function is derived. From the relational model, the coherence loss function due to the high sidelobe of CSAR is then deduced, and compared with that of the conventional SAR. It is shown that the high sidelobe of CSAR focusing signal will severely affect the baseline decorre- lation and coregistration decorrelation. Simulation results confirm the theoretical analysis and quantitatively show the baseline and coregistration decorrelation degradation due to the high sidelobes of CSAR.

KEY TECHNOLOGY OF D-INSAR AT X-BAND FOR MONITORING LAND SUBSIDENCE IN MINING AREA AND ITS APPLICATION

In theory, land subsidence measurement results with high accuracy can be obtained by using the Differential Interferometry Synthetic Aperture Radar(D-InSAR) at X-band. In practice, however, the measuring accuracy of D-InSAR at X-band has been seriously affected by some factors, e.g., decorrelation and high deformation gradient. In this work, the monitoring capability of D-InSAR for coal-mining subsidence is evaluated by using SAR data acquired by TerrraSAR-X system. The SAR image registration method for low coherence image pairs, the denoising phase filter for high noise level interferogram and atmospheric effects mitigation method are the key technical aspects which directly influence the measurement results of D-InSAR at X-band. Thus, a robust image registration method, an improved phase filter method and an atmospheric effects mitigation method are proposed in this paper. The proposed image registration method successfully achieves InSAR coregistration, while the amplitude cross-correlation cannot properly coregister low coherence SAR image pairs. Moreover, the time complexity of the proposed image registration method is obviously slighter than that of the Singular Value Decomposition(SVD) method. The comparing experiment results and the unwrapping phase results show that the improved Goldstein filter is more effective than the original Goldstein filter in noise elimination. The atmospheric influence correction experiment results show that the land subsidence areas with atmospheric influence correction are more clarified than that of without atmospheric influence correction. In summary, the presented methods directly improved the measurement results of D-InSAR at X-band.

Research on ambiguity resolution aided with triple difference

The ambiguity resolution in the field of GPS is investigated in detail. A new algorithm to resolve the ambiguity is proposed. The algorithm first obtains the floating resolution of the ambiguity aided with triple difference measurement. Decorrelation of searching space is done by reducing the ambiguity covariance matrix＇s dimension to overcome the possible sick factorization of the matrix brought by Z-transformation. In simulation, the proposed algorithm is compared with least-squares ambiguity decorrelation adjustment （LAMBDA）. The result shows that the proposed algorithm is better than LAMBDA because of lesser resolving time, which approximately reduces 20% resolving time. Thus, the proposed algorithm adapts to the high dynamic real-time applications.

Several Kinematic Data Processing Methods for Time-Correlated Observations

Time correlations always exist in modern geodetic data,and ignoring these time correlations will affect the precision and reliability of solutions.In this paper,several methods for processing kinematic time-correlated observations are studied.Firstly,the method for processing the time-correlated observations is expanded and unified.Based on the theory of maximum a posteriori estimation,the third idea is proposed after the decorrelation transformation and differential transformation.Two types of situations with and without common parameters are both investigated by using the decorrelation transformation,differential transformation and maximum a posteriori estimation solutions.Besides,the characteristics and equivalence of above three methods are studied.Secondly,in order to balance the computational efficiency in real applications and meantime effectively capture the time correlations,the corresponding reduced forms based on the autocorrelation function are deduced.Finally,with GPS real data,the correctness and practicability of derived formulae are evaluated.

Progresses on SAR Remote Sensing of Tropical Forests:Forest Biomass Retrieval and Analysis of Changing Weather Conditions

This paper is intended to report on the progresses made during the Dragon-4 project Three and Four-Dimensional Topographic Measurement and Validation(ID:32278),sub-project Multi-baseline SAR Processing for 3 D/4 D Reconstruction(ID:322782).The work here reported focuses on two important aspects of SAR remote sensing of tropical forests,namely the retrieval of forest biomass and the assessment of effects due to changing weather conditions.Recent studies have shown that by using SAR tomography the backscattered power at 30 m layer above the ground is linearly correlated to the forest Above Ground Biomass(AGB).However,the two parameters that determine this linear relationship might vary for different tropical forest sites.For purpose of solving this problem,we investigate the possibility of using Li DAR derived AGB to help training the two parameters.Experimental results obtained by processing data from the Tropi SAR campaign support the feasibility of the proposed concept.This analysis is complemented by an assessment of the impact of changing weather conditions on tomographic imaging,for which we simulate BIOMASS repeat pass tomography using ground-based Tropi SCAT data with a revisit time of 3 days and rainy days included.The resulting backscattered power variation at 30 m is within 1.5 d B.For this forest site,this error is translated into an AGB error of about 50~80 t/hm^(2),which is 20%or less of forest AGB.

Intermittent Bursts in the Boundary Plasma of HT-7

Intermittent characteristics of turbulence induced by coherent structures （blobs） was clearly observed in the ion saturation current signal, density fluctuation, particle flux and heat flux in HT-7. It is obvious that ion saturation current signal has deviated from Gaussian distribution and the skewness （S） and flatness （K） of signal increase radially outwards in the scrape-off layer （SOL）. Using conditional analysis （CA）, asymmetric character of the intermittent bursts are demonstrated. Owing to the radial propagation of the coherent structures, the particle density profile in SOL is non-exponential and flat outwards from the last close flux surface （LCFS）. It is found around LCFS that the large burst fluctuations （above 2.5 rms） are responsible for about 50% of the total particle transport. Burst events move radially outwards with Ee ~ B velocity, and the blob size can be calculated as 5r ~ V^rc. Our experiment shows that the blob size, life time and drift velocity experienced a pronounced decorrelation in the shear layer. The electrostatic Reynolds stress components become very strong and show a radially steep gradient in the proximity of the shear layer. These experimental findings may imply that the coherent structures are titled by the developed shear flow in the E × B shear layer.

Temporal decorrelation model for the bistatic SAR interferometry

This paper develops a temporal decorrelation model for the bistatic synthetic aperture radar（BSAR） interferometry. The temporal baseline is one of the important decorrelation sources for the repeat-pass synthetic aperture radar（SAR） interferometry. The study of temporal decorrelation is challenging, especially for the bistatic configuration, since temporal decorrelation is related to the data acquisition geometry. To develop an appropriate theoretical model for BSAR interferometry, the existing models for monostatic SAR cases are extended, and the general BSAR geometry configuration is involved in the derivation. Therefore, the developed temporal decorrelation model can be seen as a general model.The validity of the theoretical model is supported by Monte Carlo simulations. Furthermore, the impacts of the system parameters and BSAR geometry configurations on the temporal decorrelation model are discussed briefly.

THE WAVELET TRANSFORM BASED PROCESSING MEANS FOR 1/f NOISE IN MILLIMETER WAVE FOCAL PLANE ARRAY

After briefly introducing the characteristics of 1/f noise in millimeter wave focalplane array detectors, the paper analyses the relation of wavelet transform and 1/f noise in detail, suggests the fashion of decorrelating 1/f noise using the wavelet transform and deduces the relative expressions. The results of computer simulation show good effectiveness.

Fast optical wavefront engineering for controlling light propagation in dynamic turbid media

While propagating inside the strongly scattering biological tssue,photons lose their incident directions beyond one transport mean free path(TMFP,~1 millimeter(mm)),which makes it challenging to achieve optical focusing or clear imaging deep inside tissue.By manipulating many degrees of the incident optical wavefront,the latest optical wavefront engineering(WFE)technology compensates the wavelfront distortions caused by the scattering media and thus is toward breaking this physical limit,bringing bright perspective to many applications deep inside tissue,eg,high resolution functional/molecular imaging,optical excitation(optogenetics)and optical tweezers.However,inside the dynamic turbid media such as the biological tissue,the wavefront distortion is a fast and continuously changing process whose decorrelation rate is on timescales from milliseconds(ms)to microseconds(μs),or even faster.This requires that the WFE technology should be capable of beating this rapid process.In this review,we discuss the major challenges faced by the WFE technology due to the fast decorrelation of dynamic turbid media such as living tissue when achieving light focusing/imaging and summarize the research progress achieved to date to overcome these challenges.

Seeing through dynamics scattering media:Suppressing diffused reflection based on decorrelation time difference

We observed a phenomenon that different scattering components have different decorrelation time.Based on decorrelation time difference,we proposed a method to image an object hidden behind a turbid medium in a reflection mode.In order to suppress the big disturbance calused by reflection and back scattering,two framnes of speckles are recorded in sequence,and their difference is used for image reconstruction.Our method is immune to both medium motions and object movements.

Improved Geological Interpretation Using Landsat TM Data in Lancang-Jinghong Area, Yunnan Province, China

Landsat TM digital spectral data of Lancang Jinghong area (Yunnan P ro vince) has been used for the purpose of geological interpretation. To meet this object, different image processing techniques including selected band color comp osites, principal component analysis and IHS decorrelation stretching are used t o improve the discrimination of different lithological and structural features i n the area.It was found that IHS decorrelation stretching images obtained from t he transformation of false color composite 741 (in red, green and blue) prov ided the best results based on the original data.By combining the characteristic s of images produced by different approaches and other canonically transformed i mages with available geological data and surface observations, the geological in terpretation could be done with satisfactory degree of accuracy.

Chip Interleaved Multirate and Multimedia Transmission in Self-Encoded Communication System with Iterative Detection over Fading Channels

In this paper, we investigate the self-encoded multirate and the multimedia (SEMM) transmission. In SEMM system, the spreading codes are derived from its own previously transmitted bits rather than the pseudorandom code generator. We employ block chip interleaving at the transmitter to combat the deep fading over the channels. At the receiver, decorrelation scheme separates the combined signals not only to reduce the crosstalk between different applications, but also provide a better estimation for the despreading sequence. Interference cancelation (IC) is also adopted to improve both the correlation detection and iterative detection (ID) performance. The simulation results show that the proposed scheme significantly improves performance over fading channels.

Application of InSAR in Surface Deformation Monitoring of Electric Power Line Selection

In the process of site selection and the facility construction in power engineering, the geological conditions of the foundation have an important impact on the displacement of completed power facilities. Usually, the conventional surface displacement has certain continuity in time and space. Therefore, in the initial stage of power line selection, the relatively stable geological conditions can greatly reduce the probability of major accidents due to ground deformation. As a new surface displacement monitoring method, InSAR can obtain the displacement monitoring results in long time series. This paper used 20 Sentinel-1A data to study the geological conditions of power line selection. Based on the fact that the vegetation coverage in the line selection area and the poor penetration of C-band data may cause serious body scattering correlation, we verified the possibility of obtaining accurate results in a long-time baseline with less influence on volume scattering decorrelation. Using this method, we obtained the surface history displacement line chart of the 220 kV power line to be erected in Laiyuan to Quanyu, Hebei Province. By analyzing 10 high coherence points on the line, we found that the largest historical surface displacement in the 18 months is less than 30mm, and the maximum cumulative deformation rate is only 12 mm/a, which meets the requirements of power line erection.

A General Purpose Analysis Package

This paper presents a general-purpose analysis package able to solve two- and three- dimensional analysis problems. The system can use the following methods of solution: Successive Approximation (SA), Optimal Interpolation (OI), and 3D-Var. Analyses are given for the following parameters: zonal and meridional wind components, temperature, relative humidity, and geopotential height. The analysis package was applied to produce analyses at 6 h time interval for the period 1-11 August 2008. The period was selected for data availability and forty-one analyses were collected. The results show the validity of the different solutions, which can be chosen depending on the physical problem to solve and on the computational resources available. In particular, assuming the observations as the reference, all solutions show a decrease of the RMSE compared to the background. The decrease is consistent with the particular setting of the analysis system used in this paper. The comparison between different solutions shows that the SA converges to OI in few iterations, and that the SA solution with ten iteration is, in practice, equal to OI. Moreover, the 3D-Var method shows its potential to improve the analysis, once the horizontal and vertical length-scales and the background and observational errors are set optimally, because its solution may be sizeably different from two-dimensional methods.

Deriving glacier border information based on analysis of decorrelation in SAR interferometry

Variations of glaciers are important parameters for monitoring glacial change. Although optical remote sensing method can extract variations of glaciers effectively and accurately in cloudless regions, these variations are difficult to extract in cloudy conditions and bad weather. In this paper, a new method is presented, based on the decorrelation of repeat SAR interferometry, to extract the variations of glaciers. This method uses the decorrelation of the inland glacier＇s surface to extract the variation of glacier by comparing the coherence of the glacier and land cover in threshold values. For validation of this method, we compared classification results with that derived from TM images. An accuracy of better than 89% can be achieved if we consider the classification result from TM image as the ground truth. Results show that this method provides an effective way to identify icy areas from the coherent image.

Optimal decorrelated score subsampling for generalized linear models with massive data

In this paper, we consider the unified optimal subsampling estimation and inference on the lowdimensional parameter of main interest in the presence of the nuisance parameter for low/high-dimensionalgeneralized linear models (GLMs) with massive data. We first present a general subsampling decorrelated scorefunction to reduce the influence of the less accurate nuisance parameter estimation with the slow convergencerate. The consistency and asymptotic normality of the resultant subsample estimator from a general decorrelatedscore subsampling algorithm are established, and two optimal subsampling probabilities are derived under theA- and L-optimality criteria to downsize the data volume and reduce the computational burden. The proposedoptimal subsampling probabilities provably improve the asymptotic efficiency of the subsampling schemes in thelow-dimensional GLMs and perform better than the uniform subsampling scheme in the high-dimensional GLMs.A two-step algorithm is further proposed to implement, and the asymptotic properties of the correspondingestimators are also given. Simulations show satisfactory performance of the proposed estimators, and twoapplications to census income and Fashion-MNIST datasets also demonstrate its practical applicability.

Ground settlement of Chek Lap Kok Airport,Hong Kong,detected by satellite synthetic aperture radar interferometry

Satellite synthetic aperture radar (SAR) inter-ferometry is used to investigate the slowly accumulating ground settlement at the new Chek Lap Kok Airport in Hong Kong. Most of the land occupied by the airport was reclaimed from the sea and therefore certain ground settlement in the area has been expected. A pair of ERS-2 SAR images spanning nearly a year is used in the study. The high spatial resolution (20 m×20 m) ground settlement map derived indicates that the settlement that occurred in the area over the time period is as large as 50 mm. The SAR measurement results agree with the levelling measurements at some benchmarks in the area to well within 1 cm(rms error),and the overall correlation between the two types of results is 0.89. The paper presents some brief background of inter-ferometric SAR, and outlines the data processing methods and results.