Seeing through dynamics scattering media:Suppressing diffused reflection based on decorrelation time difference

We observed a phenomenon that different scattering components have different decorrelation time.Based on decorrelation time difference,we proposed a method to image an object hidden behind a turbid medium in a reflection mode.In order to suppress the big disturbance calused by reflection and back scattering,two framnes of speckles are recorded in sequence,and their difference is used for image reconstruction.Our method is immune to both medium motions and object movements.

Distance Estimation in Ultrasound Images Using Specific Decorrelation Curves

Speckle decorrelation algorithm is a method using decorrelation curves to estimate the distance between two neighboring ultrasound images. In this paper, we propose a new method to obtain specific decorrelation curves for distance estimation. First, several datasets of synthetic ultrasound(US) images are obtained by scanning different scatters. Second, based on the US datasets, we compute low-order moments and the elevational decorrelation curves. Finally, low-order moments are used to classify different scattering conditions. The suitable decorrelation curves can be acquired when the scattering style has been determined. With these steps, the relationship between low order moments and the decorrelation curves is established by the scattering conditions. This relationship proves to be efficient and applicable in the experiment section. The decorrelation curves chosen according to the relationship also perform well in the distance estimation test.

KEY TECHNOLOGY OF D-INSAR AT X-BAND FOR MONITORING LAND SUBSIDENCE IN MINING AREA AND ITS APPLICATION

In theory, land subsidence measurement results with high accuracy can be obtained by using the Differential Interferometry Synthetic Aperture Radar(D-InSAR) at X-band. In practice, however, the measuring accuracy of D-InSAR at X-band has been seriously affected by some factors, e.g., decorrelation and high deformation gradient. In this work, the monitoring capability of D-InSAR for coal-mining subsidence is evaluated by using SAR data acquired by TerrraSAR-X system. The SAR image registration method for low coherence image pairs, the denoising phase filter for high noise level interferogram and atmospheric effects mitigation method are the key technical aspects which directly influence the measurement results of D-InSAR at X-band. Thus, a robust image registration method, an improved phase filter method and an atmospheric effects mitigation method are proposed in this paper. The proposed image registration method successfully achieves InSAR coregistration, while the amplitude cross-correlation cannot properly coregister low coherence SAR image pairs. Moreover, the time complexity of the proposed image registration method is obviously slighter than that of the Singular Value Decomposition(SVD) method. The comparing experiment results and the unwrapping phase results show that the improved Goldstein filter is more effective than the original Goldstein filter in noise elimination. The atmospheric influence correction experiment results show that the land subsidence areas with atmospheric influence correction are more clarified than that of without atmospheric influence correction. In summary, the presented methods directly improved the measurement results of D-InSAR at X-band.

Several Kinematic Data Processing Methods for Time-Correlated Observations

Time correlations always exist in modern geodetic data,and ignoring these time correlations will affect the precision and reliability of solutions.In this paper,several methods for processing kinematic time-correlated observations are studied.Firstly,the method for processing the time-correlated observations is expanded and unified.Based on the theory of maximum a posteriori estimation,the third idea is proposed after the decorrelation transformation and differential transformation.Two types of situations with and without common parameters are both investigated by using the decorrelation transformation,differential transformation and maximum a posteriori estimation solutions.Besides,the characteristics and equivalence of above three methods are studied.Secondly,in order to balance the computational efficiency in real applications and meantime effectively capture the time correlations,the corresponding reduced forms based on the autocorrelation function are deduced.Finally,with GPS real data,the correctness and practicability of derived formulae are evaluated.

Progresses on SAR Remote Sensing of Tropical Forests:Forest Biomass Retrieval and Analysis of Changing Weather Conditions

This paper is intended to report on the progresses made during the Dragon-4 project Three and Four-Dimensional Topographic Measurement and Validation(ID:32278),sub-project Multi-baseline SAR Processing for 3 D/4 D Reconstruction(ID:322782).The work here reported focuses on two important aspects of SAR remote sensing of tropical forests,namely the retrieval of forest biomass and the assessment of effects due to changing weather conditions.Recent studies have shown that by using SAR tomography the backscattered power at 30 m layer above the ground is linearly correlated to the forest Above Ground Biomass(AGB).However,the two parameters that determine this linear relationship might vary for different tropical forest sites.For purpose of solving this problem,we investigate the possibility of using Li DAR derived AGB to help training the two parameters.Experimental results obtained by processing data from the Tropi SAR campaign support the feasibility of the proposed concept.This analysis is complemented by an assessment of the impact of changing weather conditions on tomographic imaging,for which we simulate BIOMASS repeat pass tomography using ground-based Tropi SCAT data with a revisit time of 3 days and rainy days included.The resulting backscattered power variation at 30 m is within 1.5 d B.For this forest site,this error is translated into an AGB error of about 50~80 t/hm^(2),which is 20%or less of forest AGB.

Fast optical wavefront engineering for controlling light propagation in dynamic turbid media

While propagating inside the strongly scattering biological tssue,photons lose their incident directions beyond one transport mean free path(TMFP,~1 millimeter(mm)),which makes it challenging to achieve optical focusing or clear imaging deep inside tissue.By manipulating many degrees of the incident optical wavefront,the latest optical wavefront engineering(WFE)technology compensates the wavelfront distortions caused by the scattering media and thus is toward breaking this physical limit,bringing bright perspective to many applications deep inside tissue,eg,high resolution functional/molecular imaging,optical excitation(optogenetics)and optical tweezers.However,inside the dynamic turbid media such as the biological tissue,the wavefront distortion is a fast and continuously changing process whose decorrelation rate is on timescales from milliseconds(ms)to microseconds(μs),or even faster.This requires that the WFE technology should be capable of beating this rapid process.In this review,we discuss the major challenges faced by the WFE technology due to the fast decorrelation of dynamic turbid media such as living tissue when achieving light focusing/imaging and summarize the research progress achieved to date to overcome these challenges.

Chip Interleaved Multirate and Multimedia Transmission in Self-Encoded Communication System with Iterative Detection over Fading Channels

In this paper, we investigate the self-encoded multirate and the multimedia (SEMM) transmission. In SEMM system, the spreading codes are derived from its own previously transmitted bits rather than the pseudorandom code generator. We employ block chip interleaving at the transmitter to combat the deep fading over the channels. At the receiver, decorrelation scheme separates the combined signals not only to reduce the crosstalk between different applications, but also provide a better estimation for the despreading sequence. Interference cancelation (IC) is also adopted to improve both the correlation detection and iterative detection (ID) performance. The simulation results show that the proposed scheme significantly improves performance over fading channels.

Application of InSAR in Surface Deformation Monitoring of Electric Power Line Selection

In the process of site selection and the facility construction in power engineering, the geological conditions of the foundation have an important impact on the displacement of completed power facilities. Usually, the conventional surface displacement has certain continuity in time and space. Therefore, in the initial stage of power line selection, the relatively stable geological conditions can greatly reduce the probability of major accidents due to ground deformation. As a new surface displacement monitoring method, InSAR can obtain the displacement monitoring results in long time series. This paper used 20 Sentinel-1A data to study the geological conditions of power line selection. Based on the fact that the vegetation coverage in the line selection area and the poor penetration of C-band data may cause serious body scattering correlation, we verified the possibility of obtaining accurate results in a long-time baseline with less influence on volume scattering decorrelation. Using this method, we obtained the surface history displacement line chart of the 220 kV power line to be erected in Laiyuan to Quanyu, Hebei Province. By analyzing 10 high coherence points on the line, we found that the largest historical surface displacement in the 18 months is less than 30mm, and the maximum cumulative deformation rate is only 12 mm/a, which meets the requirements of power line erection.

A General Purpose Analysis Package

This paper presents a general-purpose analysis package able to solve two- and three- dimensional analysis problems. The system can use the following methods of solution: Successive Approximation (SA), Optimal Interpolation (OI), and 3D-Var. Analyses are given for the following parameters: zonal and meridional wind components, temperature, relative humidity, and geopotential height. The analysis package was applied to produce analyses at 6 h time interval for the period 1-11 August 2008. The period was selected for data availability and forty-one analyses were collected. The results show the validity of the different solutions, which can be chosen depending on the physical problem to solve and on the computational resources available. In particular, assuming the observations as the reference, all solutions show a decrease of the RMSE compared to the background. The decrease is consistent with the particular setting of the analysis system used in this paper. The comparison between different solutions shows that the SA converges to OI in few iterations, and that the SA solution with ten iteration is, in practice, equal to OI. Moreover, the 3D-Var method shows its potential to improve the analysis, once the horizontal and vertical length-scales and the background and observational errors are set optimally, because its solution may be sizeably different from two-dimensional methods.

THE WAVELET TRANSFORM BASED PROCESSING MEANS FOR 1/f NOISE IN MILLIMETER WAVE FOCAL PLANE ARRAY

After briefly introducing the characteristics of 1/f noise in millimeter wave focalplane array detectors, the paper analyses the relation of wavelet transform and 1/f noise in detail, suggests the fashion of decorrelating 1/f noise using the wavelet transform and deduces the relative expressions. The results of computer simulation show good effectiveness.

Optimal decorrelated score subsampling for generalized linear models with massive data

In this paper, we consider the unified optimal subsampling estimation and inference on the lowdimensional parameter of main interest in the presence of the nuisance parameter for low/high-dimensionalgeneralized linear models (GLMs) with massive data. We first present a general subsampling decorrelated scorefunction to reduce the influence of the less accurate nuisance parameter estimation with the slow convergencerate. The consistency and asymptotic normality of the resultant subsample estimator from a general decorrelatedscore subsampling algorithm are established, and two optimal subsampling probabilities are derived under theA- and L-optimality criteria to downsize the data volume and reduce the computational burden. The proposedoptimal subsampling probabilities provably improve the asymptotic efficiency of the subsampling schemes in thelow-dimensional GLMs and perform better than the uniform subsampling scheme in the high-dimensional GLMs.A two-step algorithm is further proposed to implement, and the asymptotic properties of the correspondingestimators are also given. Simulations show satisfactory performance of the proposed estimators, and twoapplications to census income and Fashion-MNIST datasets also demonstrate its practical applicability.

Ground settlement of Chek Lap Kok Airport,Hong Kong,detected by satellite synthetic aperture radar interferometry

Satellite synthetic aperture radar (SAR) inter-ferometry is used to investigate the slowly accumulating ground settlement at the new Chek Lap Kok Airport in Hong Kong. Most of the land occupied by the airport was reclaimed from the sea and therefore certain ground settlement in the area has been expected. A pair of ERS-2 SAR images spanning nearly a year is used in the study. The high spatial resolution (20 m×20 m) ground settlement map derived indicates that the settlement that occurred in the area over the time period is as large as 50 mm. The SAR measurement results agree with the levelling measurements at some benchmarks in the area to well within 1 cm(rms error),and the overall correlation between the two types of results is 0.89. The paper presents some brief background of inter-ferometric SAR, and outlines the data processing methods and results.

Extraction and Analysis of Lithostratigraphic Information From Thermal Infrared Multispectral Scanner Imagery in Arid Region

Thermal infrared multispectral remote sensing is a new technology for resources exploration which was applied to geological research field in the past decade.At present, its development of data acquisition technique, application technqiue, and basis re-

Vessel density and En-face segmentation of optical coherence tomography angiography to analyse corneal vascularisation in an animal model

Background:Optical coherence tomography angiography(OCTA)is a novel non-invasive angiography technology that has recently been extensively studied for its utility in anterior segment imaging.In this study,we compared a split-spectrum amplitude decorrelation angiography(SSADA)OCTA and an optical micro-angiography(OMAG SD)OCTA system to current angiographic technique,indocyanine green angiography(ICGA),to assess corneal vascularisation in an animal model.Methods:We imaged 16 rabbits,(one eye per animal)with corneal vascularisation using SSADA OCTA(AngioVue;Optovue Inc.,USA),OMAG OCTA(Angioscan;RS-3000 Nidek Co.Ltd.,Japan)and ICGA in the same region of interest of the cornea at successive time-points.We then analysed all scanned images for vessel density measurements and used paired t-tests and Bland-Altman plots to examine for significant differences.The en-face segmentation images from each of the OCTA scans were also extracted and were matched at every 50μm segmentation to be compared for vessel density at the respective depths.Results:Bland-Altman plots revealed a good agreement between all three imaging techniques(P>0.05)for all vessel density measurements computed,and the ranges of 95%limit of agreement were acceptable from a clinical perspective.No significant difference was reported,with ICGA(μ=16.52±8.94%)being more comparable to the OMAG OCTA(μ=16.23±9.51%;p=0.50)than the SSADA OCTA(μ=17.09±7.34%;p=0.33)system.Also,a good correlation value(r>0.9)was obtained when comparing the vessel density measurements of the en-face segmentations between the OCTA systems.Conclusions:Comparable vessel density quantification between the two OCTA systems,and with ICGA was obtained.Segmentation analysis of the vasculature at different depths showed varied performance in the two OCTA systems relative to each other.The implications of the study may help to aid in the development of better OCTA algorithms for the anterior segment and its use in clinical translational research.