Optimizing the Diameter of Plugging Balls in Deep Shale Gas Wells

Deep shale gas reserves that have been fractured typically have many relatively close perforation holes. Due to theproximity of each fracture during the formation of the fracture network, there is significant stress interference,which results in uneven fracture propagation. It is common practice to use “balls” to temporarily plug fractureopenings in order to lessen liquid intake and achieve uniform propagation in each cluster. In this study, a diameteroptimization model is introduced for these plugging balls based on a multi-cluster fracture propagationmodel and a perforation dynamic abrasion model. This approach relies on proper consideration of the multiphasenature of the considered problem and the interaction force between the involved fluid and solid phases. Accordingly,it can take into account the behavior of the gradually changing hole diameter due to proppant continuousperforation erosion. Moreover, it can provide useful information about the fluid-dynamic behavior of the consideredsystem before and after plugging. It is shown that when the diameter of the temporary plugging ball is1.2 times that of the perforation hole, the perforation holes of each cluster can be effectively blocked.

The Study of Tubing Vibration Mechanism in High Pressure Gas Well

Deep gas wells and gas fields have the characteristics of high pressure. The vibration of the tubing string during the production of gas wells causes the string to be subjected to severe stress and even dynamic fatigue failure. Therefore, this article is based on the dynamic finite element theory, aiming at the characteristics of large-size tubing strings in deep gas wells. The finite element mechanics model and mathematical model of the tubing string vibration of the packer of high-pressure gas wells were established, and the ANSYS software was re-developed. The finite element analysis program for the vibration dynamics of the unbuckled and buckled strings of gas wells was compiled with APDL, and the displacement of the longitudinal vibration of the tubing string of high-pressure gas wells was studied. According to different sizes of tubing strings currently used in deep gas wells and gas fields, simulation calculations are carried out, and the axial impact load and buckling damage laws of the tubing strings of the entire well section under different production rates are obtained. It provides a theoretical basis for the prediction of tubing string vibration law and measures to prevent tubing string vibration.

Enrichment Mechanism and Prospects of Deep Oil and Gas

With the deepening of oil and gas exploration,the importance of depth is increasingly highlighted.The risk of preservation of storage space in deep reservoirs is greater than that in shallow and medium layers.Deep layers mean older strata,more complex structural evolution and more complex hydrocarbon accumulation processes,and even adjustment and transformation of oil and gas reservoirs.This paper systematically investigates the current status and research progress of deep oil and gas exploration around the world and looks forward to the future research focus of deep oil and gas.In the deep,especially the ultra-deep layers,carbonate reservoirs play a more important role than clastic rocks.Karst,fault-karst and dolomite reservoirs are the main types of deep and ultra-deep reservoirs.The common feature of most deep large and medium-sized oil and gas reservoirs is that they formed in the early with shallow depth.Fault activity and evolution of trap highs are the main ways to cause physical adjustment of oil and gas reservoirs.Crude oil cracking and thermochemical sulfate reduction(TSR)are the main chemical modification effects in the reservoir.Large-scale high-quality dolomite reservoirs is the main direction of deep oil and gas exploration.Accurate identification of oil and gas charging,adjustment and reformation processes is the key to understanding deep oil and gas distribution.High-precision detection technology and high-precision dating technology are an important guarantee for deep oil and gas research.

Fault Systems and their Control of Deep Gas Accumulations in Xujiaweizi Area

A study of faults and their control of deep gas accumulations has been made on the basis of dividing fault systems in the Xujiaweizi area. The study indicates two sets of fault systems are developed vertically in the Xujiaweizi area, including a lower fault system and an upper fault system. Formed in the period of the Huoshiling Formation to Yingcheng Formation, the lower fault system consists of five fault systems including Xuxi strike-slip extensional fault system, NE-trending extensional fault system, near-EW-trending regulating fault system, Xuzhong strike-slip fault system and Xudong strike-slip fault system. Formed in the period of Qingshankou Formation to Yaojia Formation, the upper fault system was affected mainly by the boundary conditions of the lower fault system, and thus plenty of muiti-directionally distributed dense fault zones were formed in the T2 reflection horizon. The Xuxi fault controlled the formation and distribution of Shahezi coal-measure source rocks, and Xuzhong and Xndong faults controlled the formation and distribution of volcanic reservoirs of Y1 Member and Y3 Member, respectively. In the forming period of the upper fault system, the Xuzhong fault was of successive strong activities and directly connected gas source rock reservoirs and volcanic reservoirs, so it is a strongly-charged direct gas source fault. The volcanic reservoir development zones of good physical properties that may be found near the Xuzhong fault are the favorable target zones for the next exploration of deep gas accumulations in Xujiaweizi area.

Enrichment characteristics and exploration directions of deep shale gas of Ordovician-Silurian in the Sichuan Basin and its surrounding areas,China

The enrichment characteristics of deep shale gas in the Ordovician Wufeng-Silurian Longmaxi formations in the Sichuan Basin and its surrounding areas are investigated through experiments under high temperature and high pressure,including petrophysical properties analyses,triaxial stress test and isothermal adsorption of methane experiment.(1)The deep shale reservoirs drop significantly in porosity and permeability compared with shallower shale reservoirs,and contain mainly free gas.(2)With higher deviatoric stress and axial strain,the deep shale reservoirs have higher difficulty fracturing.(3)Affected by structural location and morphology,fracture characteristics,geofluid activity stages and intensity,deep shale gas reservoirs have more complicated preservation conditions.(4)To achieve the commercial development of deep shale gas reservoirs,deepening geological understanding is the basis,and exploring reservoir simulation technology befitting the geological features is the key.(5)The siliceous shale and limestone-bearing siliceous shale in the Metabolograptus persculptus-Parakidograptus acuminatus zones(LM1-LM3 graptolite zones)are the high-production intervals for deep shale gas and the most favorable landing targets for horizontal drilling.Deeps water areas such as Jiaoshiba,Wulong,Luzhou and Changning with deep shale reservoirs over 10 m thickness are the most favorable areas for deep shale gas enrichment.It is recommended to carry out exploration and development practice in deep-water shale gas areas deposited deep with burial depth no more than 5000 m where the geological structure is simple and the shale thickness in the LM1-LM3 graptolite zone is greater than 10 m.It is better to increase the lateral length of horizontal wells,and apply techniques including high intensity of perforations,large volume of proppant,far-field and near-wellbore diversions to maximize the stimulated deep reservoir volume.

Exploration Experience and Problem concerning Deep Basin Gas in the Ordos Basin

Deep basin gas (DBG) reservoirs, in view of the characteristics of their main parts containing gas, are a type of subtle stratigraphic lithologic traps. But they have different reservoir-forming principles, especially in the distribution of oil, gas and water. DBG is characterized by gas-water invertion, namely the water located above the gas; however, normal non-anticline subtle reservoirs have normal distribution of gas and water, namely the water located under the gas. The theory of DBG broke the conventional exploration idea that gas is usually found in the high part of reservoir and water is under the gas. So, it provided a wide field and a new idea for the exploration of natural gas. Recently Ben E. Law (2002), in his article entitled "Basin-centered Gas Systems", discussed global DBG systemically. He listed 72 basins or areas containing known or suspected DBG, covering North America, South America, Europe, Asia-Pacific, South Asia, Middle East and Africa. Ordos basin, the Sichuan basin and the Jungar basin in China are presented and assumed to be of very high possibility. In China more attention has been paid to the research and exploration of DBG in the past years. The symposiums on DBG were held twice, in Guangzhou in 1998 and in Xi'an in 2000 respectively. In 2002 in particular, the publication of the book named Deep Basin Gas in China by Professor Wangtao indicated that China has entered a new stage in the research on DBG Meanwhile, it is more cheering that the exploration of DBG in the Ordos Basin has achieved remarkable success. Therefore, analyzing the exploration experiences and problems regarding the Ordos basin will promote the exploration and research of DBG in China.

“Extreme utilization”development of deep shale gas in southern Sichuan Basin,SW China

To efficiently develop deep shale gas in southern Sichuan Basin,under the guidance of“extreme utilization”theory,a basic idea and solutions for deep shale gas development are put forward and applied in practice.In view of multiple influencing factors of shale gas development,low single-well production and marginal profit of wells in this region,the basic idea is to establish“transparent geological body”of the block in concern,evaluate the factors affecting shale gas development through integrated geological-engineering research and optimize the shale gas development of wells in their whole life cycle to balance the relationship between production objectives and development costs.The solutions are as follows:(1)calculate the gold target index and pinpoint the location of horizontal well drilling target,and shale reservoirs are depicted accurately by geophysical and other means to build underground transparent geological body;(2)optimize the drilling and completion process,improve the adaptability of key tools by cooling,reducing density and optimizing the performance of drilling fluid,the“man-made gas reservoir”is built by comprehensively considering the characteristics of in-situ stress and fractures after the development well is drilled;(3)through efficient management,establishment of learning curve and optimization of drainage and production regime,the development quality and efficiency of the well are improved across its whole life cycle,to fulfil“extreme utilization”development of shale gas.The practice shows that the estimated ultimate recovery of single wells in southern Sichuan Basin increase by 10%-20%than last year.

Evolution characteristics of precursor information of coal and gas outburst in deep rock cross‑cut coal uncovering

As mines become deeper,the potential for coal and gas outbursts in deep rock cross-cut coal uncovering is enhanced.The outburst precursors are unclear,which restricts the effectiveness and reliability of warning systems.To reveal the evolution characteristics of coal and gas outburst precursor information in deep rock cross-cut coal uncovering,briquette specimens are constructed and experiments are conducted using a self-developed true triaxial outburst test system.Using acoustic emission monitoring technology,the dynamic failure of coal is monitored,and variations in the root mean square(RMS)of the acoustic emissions allow the effective cracking time and effective cracking gas pressure to be defined.These characteristics are obviously different in deep and shallow coal.The characteristic parameters of gas outburst exhibit stepwise variations at different depths.The RMS and cumulative RMS have stepped failure characteristics with respect to changes in gas pressure.The characteristic parameters of coal failure are negatively correlated with the average in-situ stress and effective stress,but positively correlated with the lateral pressure coefficient of in-situ stress and the critical gas pressure.The transition characteristics are highly sensitive in all cases.The critical depth between deep and shallow coal and gas outbursts is 1700 m.The expansion multiple of acoustic emission intensity from the microfracture stage to the sharp-fracture stage of coal is defined as the outburst risk index,N1.For depths of 1100–1700 m,N1≥7 denotes a higher risk of outburst,whereas at depths of 1700–2500 m,N1≥3 indicates enhanced risk.

Porosity, permeability and rock mechanics of Lower Silurian Longmaxi Formation deep shale under temperature-pressure coupling in the Sichuan Basin, SW China

To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.

Technical Challenges and Countermeasures for Deep Shale Gas Drilling by SINOPEC

Deep shale gas reservoirs being developed by SINOPEC are characterized by significant buried depths, high rock strengths, high temperatures and pressures, multiple layers, low ROPs, prolonged drilling time and prohibitoryhigh costs. All of these factors may negatively affect the economic and effective development of shale gas. Under such circumstances, existing drilling techniques for deep shale gas around the world have been reviewed to highlight technical challenges in deep shale gas drilling in China. With consideration to the previous drilling operations of SINOPEC for deep shale gas, technical solutions for deep shale gas drilling have been proposed with regard to the optimization of casing programs, enhanced drilling, trajectory control, high-density oil-based drilling fluid, cementation for deep shale gas development and other aspects. Some of these research findings have been deployed with great successes in Pingqiao, Jiangdong Block in the 2nd Phase of Fuling Project, Dingshan Block and other blocks with deep shale gas development. Among them, Well JY-74-2HF has had a drilling time of only 54.25d, whereas Well JY-187-2HF has a TVD up to 4024.14m. Relevant research results may provide valuable guidance and references for the optimization of drilling programs andthe enhancement ofdrilling ef^ciency for deep shale gas development.

A numerical investigation on deep shale gas recovery

In recent years,exploration and development of deep shale gas(at a burial depth of 3,500-4,500 m)has become a hotspot in the industry.However,the state of gas storage and transporting mechanism for deep shale gas under high pressure and temperature have not been thoroughly explored,compared with its shallower counterpart.A numerical model for deep shale gas recovery considering multi-site nonisothermal excess adsorption has been established and applied using Finite Element Method.Results from the simulation reveal the following.(1)Excess desorption significantly impacts early-stage performance of deep shale gas well;the conventional way for shallower shale gas development,in which the density of adsorbed gas is not distinguished from that of free gas,overestimates the gas in place(GIP).(2)Although thermal stimulation can speed up the desorption and transporting of deep shale gas,the incremental volume of produced gas,which is impacted not only by seepage velocity but also density of gas,is insignificant,far from expectation.Only an additional 2.03%of cumulative gas would be produced under treatment temperature of 190C and initial reservoir temperature of 90C in a period of 5 years.(3)Matrix porosity,which can be measured on cores in laboratory and/or estimated by using well logging and geophysical data,is the most favorable parameter for deep shale gas recovery.With 60%increase in matrix porosity,an extra 67.25%shale gas on a daily base would be recovered even after 5-year depletion production;(4)Production rate for gas wells in shale reservoirs at 3,500 m and 4,500 m deep would be raised by 5.4%in a 5-year period if the depth of target interval would increase by 340 m without thermal treatment according to the numerical model proposed in the study.

Driving forces and their relative contributions to hydrocarbon expulsion from deep source rocks: A case of the Cambrian source rocks in the Tarim Basin

To thoroughly understand the dynamic mechanism of hydrocarbon expulsion from deep source rocks,in this study,five types of hydrocarbon expulsion dynamics(thermal expansion,hydrocarbon diffusion,compaction,product volume expansion,and capillary pressure difference(CPD))are studied.A model is proposed herein to evaluate the relative contribution of different dynamics for hydrocarbon expulsion using the principle of mass balance,and the model has been applied to the Cambrian source rocks in the Tarim Basin.The evaluation results show that during hydrocarbon expulsion from the source rocks,the relative contribution of CPD is the largest(>50%),followed by compaction(10%-40%),product volume expansion(5%-30%),and thermal expansion(2%-20%).The relative contribution of diffusion to hydrocarbon expulsion is minimal(<10%).These results demonstrate that CPD plays an important role in the hydrocarbon expulsion process of deep source rocks.The hydrocarbon expulsion process of source rocks can be categorized into three stages based on the contribution of different dynamics to the process:the first stage is dominated by compaction and diffusion to expel hydrocarbons,the second stage is dominated by product volume expansion and CPD,and the third stage is dominated by product volume expansion and CPD.This research offers new insights into hydrocarbon exploration in tight oil and gas reservoirs.

Insights into the hydrogen evolution reaction in vanadium redox flow batteries:A synchrotron radiation based X-ray imaging study

The parasitic hydrogen evolution reaction(HER)in the negative half-cell of vanadium redox flow batteries(VRFBs)causes severe efficiency losses.Thus,a deeper understanding of this process and the accompanying bubble formation is crucial.This benchmarking study locally analyzes the bubble distribution in thick,porous electrodes for the first time using deep learning-based image segmentation of synchrotron X-ray micro-tomograms.Each large three-dimensional data set was processed precisely in less than one minute while minimizing human errors and pointing out areas of increased HER activity in VRFBs.The study systematically varies the electrode potential and material,concluding that more negative electrode potentials of-200 m V vs.reversible hydrogen electrode(RHE)and lower cause more substantial bubble formation,resulting in bubble fractions of around 15%–20%in carbon felt electrodes.Contrarily,the bubble fractions stay only around 2%in an electrode combining carbon felt and carbon paper.The detected areas with high HER activity,such as the border subregion with more than 30%bubble fraction in carbon felt electrodes,the cutting edges,and preferential spots in the electrode bulk,are potential-independent and suggest that larger electrodes with a higher bulk-to-border ratio might reduce HER-related performance losses.The described combination of electrochemical measurements,local X-ray microtomography,AI-based segmentation,and 3D morphometric analysis is a powerful and novel approach for local bubble analysis in three-dimensional porous electrodes,providing an essential toolkit for a broad community working on bubble-generating electrochemical systems.

Hydrate Prevention Strategies and the Associated Cost in the Gulf of Mexico

With the petroleum industry endeavoring to develop promising oil and gas in deeper water, gas hydrates prevention is a serious concern for oil and gas producing companies producing at conditions in the hydrate region. This paper details lessons learned from the successful field deployment of AA LDHI and proper implementation strategies used for 3 different practical fields as case studies in the Gulf of Mexico. From the 3 field experiences, the AA LDHI has been used to replace the conventional thermodynamic hydrate inhibitor due to its numerous benefits during steady state operations and transition operations where AA LDHI is injected prior to extended shut in and restart for fields producing at low water cut. However, the strategy to develop a cost effective chemical management of hydrates for fields producing at high water cut is by pumping methanol or diesel to push down the wellbore fluid below the mud line during planned and unplanned shut-ins to delay water production, it also secures the riser with non hydrate fluids. This illustrates how the AA LDHIs are used in conjunction with more conventional hydrate management approaches to reach an optimal cost effective field hydrate management solution. However, this shows that the key to overall success of hydrate prevention is a full integration of a good front end design, a comprehensive deployment and an effective down hole monitoring system.

Progress of Deep Geological Survey Project under the China Geological Survey

Serving as a way to understand the material composition,structure,and dynamic process of the Earth's interior,deep earth exploration is driven by not only mankind's pursuit of natural mysteries but also mankind's basic need to obtain resources and guarantee economic and social development.The first phase of deep earth exploration of China(SinoProbe)was carried out from 2008 to 2016 and tremendous results were achieved.In 2016,the China Geological Survey launched a Deep Geological Survey Project(also referred to as the Project)to continuously explore the deep Earth.Focusing on the national energy resources strategy,the Belt and Road Initiative,and major basic issues of the geological survey,the Project was carried out in Songliao Basin(an important energy base in China)and major geological boundaries and tectonic units including Qilian Mountains-Tianshan Mountains and Qinzhou-Hangzhou juncture belt.The purpose of it is to reveal the process,structure,and forming patterns of the deep ore deposits and petroleum reservoirs,clarify the evolutionary pattern and controlling factors of Mesozoic environmental climate,and discover deep fine structures of key orogens,basins,and mountains by comprehensive geophysical exploration and scientific drilling.Great achievements have been obtained after more than three years of efforts,including a cumulative 1552 km of deep seismic reflection profiles and magnetotelluric profiles,an ultra-deep continental scientific crilling well,a scientific drilling pilot hole,and a magnetotelluric array and a portable broadband seismic array,both of which cover South China.Moreover,significant progress has been made in ultra-deep drilling technology,deep oil and gas discovery in Songliao Basin,and basic geological issues of Qilian Orogen and Qinzhou-Hangzhou juncture belt in South China,greatly accelerating the deep earth exploration in China and further consolidating China's position as a power in deep earth exploration.

Comprehensive Evaluation of Geological and Engineering Sweet Spots of Shale Gas Reservoir: A Case Study of the Luzhou Block, Sichuan Basin

There is a huge amount of marine shale gas resources in the southern Sichuan Basin in China, and most of the resources are at the buried depth of 3500 - 4500 meters. At present, deep shale gas is in the early stage of exploration and development. In order to achieve large-scale efficient development, in addition to optimizing favorable blocks, it is also to identify the optimal target in the vertical direction combine geology, drilling, and fracturing. Therefore, Taking the Longmaxi formation shale in the Luzhou block as the research object, based on drilling, logging, and core experiment data, through single well and 3D geomechanical modeling methods, analyze the characteristics of organic matter abundance, porosity, pore pressure, collapse pressure, mineral composition and in-situ stress of different layers of shale in Longmaxi formation. Systematically summarized the main controlling factors of the “sweet spot” of deep shale gas and establish the comprehensive evaluation system of deep shale gas “sweet spots”, to clarify the optimal “sweet spots” of geology, drilling, and fracturing in the Longmaxi reservoir. Results show that the total organic carbon content, porosity, and gas saturation of the long111 layer are higher than other layers. The Long111 layer has a low collapse pressure and a high compressive strength, the risk of wellbore instability is relatively low. The stress difference coefficient of All layers is less than 0.3, and the brittleness index of the Long111 layer is 62.35%. A complex fracture network is easier to form after fracturing. The conclusion shows that the Long111 layer is the optimal reservoir section of the Longmaxi Formation. Ensure the drilled rate of the Long111 layer and maximize the length of the horizontal section can obtain higher production.

Improvement of reservoir quality of ultra-deep tight sandstones by tectonism and fluid:A case study of Keshen gas field in Tarim Basin,western China

The Keshen gas field is one of the most important natural gas supply sources in the Tarim basin,western China.The main gas producing interval there is the Lower Cretaceous Bashijiqike Formation(K1bs),it is an ultra-deep tight reservoir whose buried depth exceeds 6000 m,and it shows a low matrix porosity(<10%)and extremely low matrix permeability(<0.1mD).However,this reservoir can supply extremely high and stable gas production due to improvement of reservoir quality by tectonism and fluid.Based on tectonic evolution analysis by plenty of lab data of core plugs or thin sections,the enhancement models of tectonism and fluid are built,evidence suggests both tectonism and fluid improve the reservoir quality greatly.Tectonic evolution produces lots of natural fractures in 3stages which promote the ultra-deep tight reservoir permeability 10–200 times,then,testing results of new boreholes without fracturing show reservoir permeability underground can reach 20 mD.Furthermore,fluid dissolution increases reservoir porosity 1–2 times,the main dissolved mineral is feldspar,all fluid dissolution came from the unconformity controlling the dissolution distance.Tectonism and fluid interact on each other:Tectonism controls fracture distribution and types of diagenic fluid in reservoir,but fluids influence fracture cements and dissolution.Both tectonic folding and the fluid flow control the sweet point reservoir located in upper 150 m formation.

Synthesis and mechanism of environmentally friendly high temperature and high salt resistant lubricants

With the exploration and development of deep and ultra-deep oil and gas,high torque and high friction during the drilling of deep and ultra-deep wells become one of the key issues affecting drilling safety and drilling speed.Meanwhile,the high temperature and high salt problem in deep formations is prominent,which poses a major challenge to the lubricity of drilling fluids under high temperature and high salt.This paper reports an organic borate ester SOP as an environmentally friendly drilling fluid lubricant.The performance evaluation results show that when 1%lubricant SOP is added to the fresh water-based mud,the lubrication coefficient decreases from 0.631 to 0.046,and the reduction rate of lubrication coefficient is 92.7%.Under the conditions of 210℃ and 30%NaCl,the reduction rate of lubricating coefficient of the base slurry with 1%SOP was still remain 81.5%.After adding 1%SOP,the wear volume decreased by 94.11%compared with the base slurry.The contact resistance experiment during the friction process shows that SOP can form a thick adsorption film on the friction surface under high temperature and high salt conditions,thus effectively reducing the friction resistance.Molecular dynamics simulation shows that lubricant SOP can be physically adsorbed on the surface of drilling tool and borehole wall through hydrogen bond and van der Waals force.XPS analysis further shows that SOP adsorbs on the friction surface and reacts with metal atoms on the friction surface to form a chemically reactive film.Therefore,under high temperature and high salt conditions,the synergistic effect of physical adsorption film and chemical reaction film effectively reduces the frictional resistance and wear of the friction surface.In addition,SOP is non-toxic and easy to degrade.Therefore,SOP is a highly effective and environmentally friendly lubricant in high temperature and high salt drilling fluid.

Factors controlling the formation and evolution of source rocks in the Shahezi Formation,Xujiaweizi fault depression,Songliao Basin

The types and quality of source rocks in the Shahezi Formation are the key factors affecting the distributions of various deep gas reservoirs in the Xujiaweizi fault depression in Songliao Basin.To clarify the quality differences and origins of different types of source rocks in the Shahezi Formation,this study reconstructed the sedimentary and water environment,determined the controlling effects of fault activity,sedimentary facies,and paleo-sedimentary environment on the quality of various source rocks,by making full use of seismic,logging,core,organic geochemical and element geochemical analysis.The results show that two types of source rocks developed in the Shahezi Formation,namely,mudstones and coals.The mudstones have a relatively high abundance of organic matter,which consists of type-Ⅱ kerogen and partial type-Ⅲ kerogen,and are concentrated in Sha-I Member.The coals have a high abundance of organic matter,which consist of type-Ⅲ kerogen,and are mainly distributed in Sha-Ⅱ Member.During the deposition of Sha-I Member,intense fault activity formed arrow,deep-water lacustrine basins with high salinity and strong reducibility on the downthrow sides of faults.During the deposition of Sha-II Member,fault activity progressively weakened,and the areas of lacustrine basins enlarged to their maximum values and became wide,shallow-water basins with low salinity and low reducibility.The development of source rocks was controlled by fault activity,sedimentary facies,and paleo-sedimentary environment.Fault activity formed accommodation space on the downthrown sides of faults for mudstone accumulation,thus determining mudstone thickness.The sedimentary environment controlled the organic matter input and determined the distribution of mudstones and coals.The paleo-sedimentary environment,which consisted of paleo-salinity,as well as paleo-water depth and redox conditions,affected the accumulation and preservation of organic matter and is the main controlling factor for the quality difference of various source rocks in the Shahezi Formation.

Geochemical Characteristics and Migration Pathways of Ordovician Carbonate Oil Reservoirs in the Tuoputai Area,Tarim Basin,Northwestern China

Exploration potential is huge and the oil resources are rich in the Ordovician reservoirs of the Tarim Basin.However,the mechanism of hydrocarbon accumulation is complex and not yet fully understood.In the Tuoputai area,the hydrocarbon migration pathways and characteristics of deep hydrocarbon accumulation are revealed through analyses of the physical data of rich oil and gas,the geochemical parameters of oil,and fluid inclusions.The results show that the Ordovician oils in the Tuoputai area have the same geochemical characteristics as the mixed oil from the Lower Cambrian source rock and the Middle–Upper Ordovician source rock.The Ordovician reservoirs have been charged three times:in the late Caledonian,late Hercynian,and Himalayan stages.Oil charging occurred in the Hercynian stage,in particular,as it is the main filling period of hydrocarbon.The north-northeast(NNE)-trending TP12 CX major fault,active in in these times and is dominant migration channel of hydrocarbon,but there is segmentation affected by the difference of activities.Oil maturity is higher in the south than in the north and is abnormally high near the major fault.Parameters related to migration indicate that oil migrated northeastward along the NNE-trending TP12 CX major fault and adjusted laterally along the secondary faults and weathering crust,forming the present characteristics of oil and gas distribution.