1 Introduction Information technology has been playing an ever-increasing role in geoscience.Sphisicated database platforms are essential for geological data storage,analysis and exchange of Big Data(Feblowitz,2013;Zh...1 Introduction Information technology has been playing an ever-increasing role in geoscience.Sphisicated database platforms are essential for geological data storage,analysis and exchange of Big Data(Feblowitz,2013;Zhang et al.,2016;Teng et al.,2016;Tian and Li,2018).The United States has built an information-sharing platform for state-owned scientific data as a national strategy.展开更多
1 Introduction Sedimentary rocks archive important information for understanding how the earth system operates and how life and environments have evolved through earth history.Properly identifying characteristics of s...1 Introduction Sedimentary rocks archive important information for understanding how the earth system operates and how life and environments have evolved through earth history.Properly identifying characteristics of sedimentary rocks,along with the subsequent interpretation of depositional processes and sedimentary environments in a basin or locality.展开更多
A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay ...A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay arrivals of surface-bottom reflection and bottom-surface reflection intersect at the source depth. Two hydrophones deployed vertically with a certain interval are required at least. If the receiver depths are known, the pair of time delays can be used to estimate the source depth. With the proposed method the source depth can be estimated successfully in a moderate range in the deep ocean without complicated matched-field calculations in the simulations and experiments.展开更多
There is a great demand for in-situ real-time chemical sensors in the oceanographic research, to measure the chemical components under the deep sea. The ISE (Ion Selective Electrode) is commonly used as a detecting pa...There is a great demand for in-situ real-time chemical sensors in the oceanographic research, to measure the chemical components under the deep sea. The ISE (Ion Selective Electrode) is commonly used as a detecting part of deep-sea electro-chemical sensors. The paper highlights the solidification and micromation of the working and reference electrodes. The sensors of pH and H 2S with a thermal probe are accomplished after the solution of configuration of electrodes and signal processing. The sensor system has been tested successfully in the cruise of DY105-12, 14 sponsored by China Ocean Mineral Research and Exploitation Association(COMRA).展开更多
Paleogeography is a discipline that studies spatial distribution and evolutionary characteristics of geographic objects in earth history(Feng,2003;Feng et al.,2012).It focuses on the sediments,organisms and environmen...Paleogeography is a discipline that studies spatial distribution and evolutionary characteristics of geographic objects in earth history(Feng,2003;Feng et al.,2012).It focuses on the sediments,organisms and environmental proxies,most of which are preserved in the rocks.However,a large amount of this geological and biological information was no longer preserved after the geological process of burial.展开更多
Considering the recent developments in deep learning, it has become increasingly important to verify what methods are valid for the prediction of multivariate time-series data. In this study, we propose a novel method...Considering the recent developments in deep learning, it has become increasingly important to verify what methods are valid for the prediction of multivariate time-series data. In this study, we propose a novel method of time-series prediction employing multiple deep learners combined with a Bayesian network where training data is divided into clusters using K-means clustering. We decided how many clusters are the best for K-means with the Bayesian information criteria. Depending on each cluster, the multiple deep learners are trained. We used three types of deep learners: deep neural network (DNN), recurrent neural network (RNN), and long short-term memory (LSTM). A naive Bayes classifier is used to determine which deep learner is in charge of predicting a particular time-series. Our proposed method will be applied to a set of financial time-series data, the Nikkei Average Stock price, to assess the accuracy of the predictions made. Compared with the conventional method of employing a single deep learner to acquire all the data, it is demonstrated by our proposed method that F-value and accuracy are improved.展开更多
With the advancement of technology and the increase in user demands, gesture recognition played a pivotal role in the field of human-computer interaction. Among various sensing devices, Time-of-Flight (ToF) sensors we...With the advancement of technology and the increase in user demands, gesture recognition played a pivotal role in the field of human-computer interaction. Among various sensing devices, Time-of-Flight (ToF) sensors were widely applied due to their low cost. This paper explored the implementation of a human hand posture recognition system using ToF sensors and residual neural networks. Firstly, this paper reviewed the typical applications of human hand recognition. Secondly, this paper designed a hand gesture recognition system using a ToF sensor VL53L5. Subsequently, data preprocessing was conducted, followed by training the constructed residual neural network. Then, the recognition results were analyzed, indicating that gesture recognition based on the residual neural network achieved an accuracy of 98.5% in a 5-class classification scenario. Finally, the paper discussed existing issues and future research directions.展开更多
With the rapid development of mechanical equipment, the mechanical health monitoring field has entered the era of big data. However, the method of manual feature extraction has the disadvantages of low efficiency and ...With the rapid development of mechanical equipment, the mechanical health monitoring field has entered the era of big data. However, the method of manual feature extraction has the disadvantages of low efficiency and poor accuracy, when handling big data. In this study, the research object was the asynchronous motor in the drivetrain diagnostics simulator system. The vibration signals of different fault motors were collected. The raw signal was pretreated using short time Fourier transform （STFT） to obtain the corresponding time-frequency map. Then, the feature of the time-frequency map was adap- tively extracted by using a convolutional neural network （CNN）. The effects of the pretreatment method, and the hyper parameters of network diagnostic accuracy, were investigated experimentally. The experimental results showed that the influence of the preprocessing method is small, and that the batch-size is the main factor affecting accuracy and training efficiency. By investigating feature visualization, it was shown that, in the case of big data, the extracted CNN features can represent complex mapping relationships between signal and health status, and can also overcome the prior knowledge and engineering experience requirement for feature extraction, which is used by tra- ditional diagnosis methods. This paper proposes a new method, based on STFT and CNN, which can complete motor fault diagnosis tasks more intelligently and accurately.展开更多
基金granted by the National Science&Technology Major Projects of China(Grant No.2016ZX05033).
文摘1 Introduction Information technology has been playing an ever-increasing role in geoscience.Sphisicated database platforms are essential for geological data storage,analysis and exchange of Big Data(Feblowitz,2013;Zhang et al.,2016;Teng et al.,2016;Tian and Li,2018).The United States has built an information-sharing platform for state-owned scientific data as a national strategy.
文摘1 Introduction Sedimentary rocks archive important information for understanding how the earth system operates and how life and environments have evolved through earth history.Properly identifying characteristics of sedimentary rocks,along with the subsequent interpretation of depositional processes and sedimentary environments in a basin or locality.
基金Supported by the National Natural Science Foundation of China under Grant No 11174235
文摘A method of source depth estimation based on the multi-path time delay difference is proposed. When the minimum time arrivals in all receiver depths are snapped to a certain time on time delay-depth plane, time delay arrivals of surface-bottom reflection and bottom-surface reflection intersect at the source depth. Two hydrophones deployed vertically with a certain interval are required at least. If the receiver depths are known, the pair of time delays can be used to estimate the source depth. With the proposed method the source depth can be estimated successfully in a moderate range in the deep ocean without complicated matched-field calculations in the simulations and experiments.
基金The research program was financially supported by the Joint Program of Chinese 863 Project (Grant No. 2001AA612020 4) and the sea trial support from COMRA, China Ocean Mineral Research and Exploitation Association as well.
文摘There is a great demand for in-situ real-time chemical sensors in the oceanographic research, to measure the chemical components under the deep sea. The ISE (Ion Selective Electrode) is commonly used as a detecting part of deep-sea electro-chemical sensors. The paper highlights the solidification and micromation of the working and reference electrodes. The sensors of pH and H 2S with a thermal probe are accomplished after the solution of configuration of electrodes and signal processing. The sensor system has been tested successfully in the cruise of DY105-12, 14 sponsored by China Ocean Mineral Research and Exploitation Association(COMRA).
基金granted by the National Science and Technology Major Project of China(Grant No.2017ZX05035002-001)the National Natural Science Foundation of China(Grant Nos.41802017 and 41725007)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB26000000)the State Key Laboratory of Palaeobiology and Stratigraphy(Grant No.20172112).
文摘Paleogeography is a discipline that studies spatial distribution and evolutionary characteristics of geographic objects in earth history(Feng,2003;Feng et al.,2012).It focuses on the sediments,organisms and environmental proxies,most of which are preserved in the rocks.However,a large amount of this geological and biological information was no longer preserved after the geological process of burial.
文摘Considering the recent developments in deep learning, it has become increasingly important to verify what methods are valid for the prediction of multivariate time-series data. In this study, we propose a novel method of time-series prediction employing multiple deep learners combined with a Bayesian network where training data is divided into clusters using K-means clustering. We decided how many clusters are the best for K-means with the Bayesian information criteria. Depending on each cluster, the multiple deep learners are trained. We used three types of deep learners: deep neural network (DNN), recurrent neural network (RNN), and long short-term memory (LSTM). A naive Bayes classifier is used to determine which deep learner is in charge of predicting a particular time-series. Our proposed method will be applied to a set of financial time-series data, the Nikkei Average Stock price, to assess the accuracy of the predictions made. Compared with the conventional method of employing a single deep learner to acquire all the data, it is demonstrated by our proposed method that F-value and accuracy are improved.
文摘With the advancement of technology and the increase in user demands, gesture recognition played a pivotal role in the field of human-computer interaction. Among various sensing devices, Time-of-Flight (ToF) sensors were widely applied due to their low cost. This paper explored the implementation of a human hand posture recognition system using ToF sensors and residual neural networks. Firstly, this paper reviewed the typical applications of human hand recognition. Secondly, this paper designed a hand gesture recognition system using a ToF sensor VL53L5. Subsequently, data preprocessing was conducted, followed by training the constructed residual neural network. Then, the recognition results were analyzed, indicating that gesture recognition based on the residual neural network achieved an accuracy of 98.5% in a 5-class classification scenario. Finally, the paper discussed existing issues and future research directions.
基金Supported by National Natural Science Foundation of China(Grant No.51405241,51505234,51575283)
文摘With the rapid development of mechanical equipment, the mechanical health monitoring field has entered the era of big data. However, the method of manual feature extraction has the disadvantages of low efficiency and poor accuracy, when handling big data. In this study, the research object was the asynchronous motor in the drivetrain diagnostics simulator system. The vibration signals of different fault motors were collected. The raw signal was pretreated using short time Fourier transform （STFT） to obtain the corresponding time-frequency map. Then, the feature of the time-frequency map was adap- tively extracted by using a convolutional neural network （CNN）. The effects of the pretreatment method, and the hyper parameters of network diagnostic accuracy, were investigated experimentally. The experimental results showed that the influence of the preprocessing method is small, and that the batch-size is the main factor affecting accuracy and training efficiency. By investigating feature visualization, it was shown that, in the case of big data, the extracted CNN features can represent complex mapping relationships between signal and health status, and can also overcome the prior knowledge and engineering experience requirement for feature extraction, which is used by tra- ditional diagnosis methods. This paper proposes a new method, based on STFT and CNN, which can complete motor fault diagnosis tasks more intelligently and accurately.
