Can environmental sustainability be decoupled from economic growth? Empirical evidence from Eastern Europe using the common correlated effect mean group test

The European Union(EU) and Organisation for Economic Co-operation and Development(OECD) aim to develop long-term policies for their respective member countries. Having observed increasing dangers to the environment posed by rising economic growth, they are seeking pathways to enable policy action on economic growth and environmental sustainability. Given the facts in theoretical and empirical studies, this study assessed the validity of the decoupling hypothesis by investigating asymmetricity in the relationship between environmental sustainability and economic growth in nine Eastern European countries from 1998 to 2017 using the cross-section augmented Dickey-Fuller(CADF) unit root, panel corrected standard error(PCSE), common correlated effect mean group(CCEMG), and Dumitrescu Hurlin causality approaches. Both population growth and drinking water are used as controlled variables. The outcomes establish strong cointegration among all the variables of interest. According to the results of CCEMG test, economic growth exerts short-term environmental degradation but has long-term environmental benefits in Eastern Europe;and population growth and drinking water exert a positive effect on environmental sustainability in both the short-and long-run. The results of Dumitrescu Hurlin causality test indicate that environmental sustainability is unidirectionally affected by economic growth. Based on these outcomes, we suggest the following policies:(1) the EU and OECD should implement member-targeted policies on economic growth and fossil-fuel use towards regulating industrial pollution, water use, and population control;and(2) the EU and OECD member countries should invest in environmental technologies through green research and development(R&D) to transform their dirty industrial processes and ensure productive energy use.

文献“Environmental Testing for Launch and Space Vehicles”点评

作者根据多年的实践经验,对该文献中重要部分进行了点评,指出:空间系统的结构设计要“严格”按照环境设计来进行考核,而环境试验的目的除了筛选工艺质量之外,更重要的是验证设计载荷是否合理。文章还分别对声、振动和冲击试验中的关键步骤和内容进行了解析和说明。

Preliminary results of environmental monitoring of the natural gas hydrate production test in the South China Sea

Natural gas hydrate (NGH)is considered as one of the new clean energy sources of the 21st century with the highest potential.The environmental issues of NGH production have attracted the close attention of scientists in various countries.From May 10 to July 9,2017,the first offshore NGH production test in the South China Sea (SCS)was conducted by the China Geological Survey.In addition,environmental security has also been effectively guaranteed via a comprehensive environmental monitoring system built during the NGH production test.The monitoring system considered sea-surface atmosphere methane and carbon dioxide concentrations,dissolved methane in the sea water column,and the seafloor physical oceanography and marine chemistry environment.The whole process was monitored via multiple means, in multiple layers,in all domains,and in real time.After the production test,an environmental investigation was promptly conducted to evaluate the environmental impact of the NGH production test. The monitoring results showed that the dissolved methane concentration in seawater and the near-seabed environment characteristics after the test were consistent with the background values,indicating that the NGH production test did not cause environmental problems such as methane leakage.

Realization of Reconfigurable Virtual Environments for Virtual Testing

This paper presents the design and implementation of reconfigurable virtual environments (VEs) for virtual testing. It proposes a hybrid design approach that is derived from a so-called integration and composition of the reconfiguration strategy. The designing process has thus evolved from binding virtual objects using reconfiguration rules within the context of virtual testing scenarios. Therefore reconfigurable virtual environments are established with improved flexibility and scalability, tailored to a wide range of virtual testing applications. Those virtual environments integrate virtual testing scenarios, data acquisition, databases, rule mapping and application interfaces, which yield modular testing functions and an open-ended system architecture with a set of extensible interface tools to realize data exchange within reconfigurable VEs. This enables virtual testing scenarios to be reconfigured interactively based on real time data and communication between virtual environments and real environments. A virtual testing application has been implemented using reconfigurable VEs. Keywords Virtual environment - virtual testing - reconfigurable virtual reality Wenyan Wu graduated from Dalian University of Technology, China, with BSc and MSc in 1988 and 1991 respectively. She earned her PhD degree from University of Derby, UK, in 2002. She had taught and researched in Harbin Institute of Technology, China and De Montfort University, UK. She is currently a senior lecturer in simulation and virtual reality at Staffordshire University, UK. Her research interests include computer graphics, Virtual Reality and Augmented Reality system, advanced interface, modelling and simulation, distribution system.Zhengxu Zhao BSc, MSc, PhD, CEng, CITP, MBCS, full Professor in Applied Computing, Director of Virtual Reality Centre. He is also a Cheng Kong Scholar Project Professor in Virtual Reality Technology and Director of Virtual Reality Research Centre at the Southeast University, P R China. Professor Zhao’s research interests include computing graphics and VR systems, industrial process simulation, CIM and manufacturing management systems.

Stereoscopic Camera-Sensor Model for the Development of Highly Automated Driving Functions within a Virtual Test Environment

The need for efficient and reproducible development processes for sensor and perception systems is growing with their increased use in modern vehicles. Such processes can be achieved by using virtual test environments and virtual sensor models. In the context of this, the present paper documents the development of a sensor model for depth estimation of virtual three-dimensional scenarios. For this purpose, the geometric and algorithmic principles of stereoscopic camera systems are recreated in a virtual form. The model is implemented as a subroutine in the Epic Games Unreal Engine, which is one of the most common Game Engines. Its architecture consists of several independent procedures that enable a local depth estimation, but also a reconstruction of a whole three-dimensional scenery. In addition, a separate programme for calibrating the model is presented. In addition to the basic principles, the architecture and the implementation, this work also documents the evaluation of the model created. It is shown that the model meets specifically defined requirements for real-time capability and the accuracy of the evaluation. Thus, it is suitable for the virtual testing of common algorithms and highly automated driving functions.

Integrated biomarker response to assess toxic impacts of iron and manganese on deep-sea mussel Gigantidas platifrons under a deep-sea mining activity scenario

Deep-sea mining activities can potentially release metals,which pose a toxicological threat to deep-sea ecosystems.Nevertheless,due to the remoteness and inaccessibility of the deep-sea biosphere,there is insufficient knowledge about the impact of metal exposure on its inhabitants.In this study,deep-sea mussel Gigantidas platifrons,a commonly used deep-sea toxicology model organism,was exposed to manganese(100,1000μg/L)or iron(500,5000μg/L)for 7 d,respectively.Manganese and iron were chosen for their high levels of occurrence within deep-sea deposits.Metal accumulation and a battery of biochemical biomarkers related to antioxidative stress in superoxide dismutase(SOD),catalase(CAT),malondialdehyde(MDA);immune function in alkaline phosphatase(AKP),acid phosphatase(ACP);and energy metabolism in pyruvate kinase(PK)and hexokinase(HK)were assessed in mussel gills.Results showed that deep-sea mussel G.platifrons exhibited a high capacity to accumulate Mn/Fe.In addition,most tested biochemical parameters were altered by metal exposure,demonstrating that metals could induce oxidative stress,suppress the immune system,and affect energy metabolism of deep-sea mussels.The integrated biomarker response(IBR)approach indicated that the exposure to Mn/Fe had a negative impact on deep-sea mussels,and Mn demonstrated a more harmful impact on deep-sea mussels than Fe.Additionally,SOD and CAT biomarkers had the greatest impact on IBR values in Mn treatments,while ACP and HK were most influential for the low-and high-dose Fe groups,respectively.This study represents the first application of the IBR approach to evaluate the toxicity of metals on deep-sea fauna and serves as a crucial framework for risk assessment of deep-sea mining-associated metal exposure.

Prospects for the continued development of environmentally-realistic toxicity test susing microorganisms

The focus of environmental regulations has changed significantly since the introduction of the bioassay as a standard means of assessing environmental impact. Prominent in this change is an increasing emphasis on protecting the integrity of natural ecosystems, which incorporate community- and system-level properties as well as organismal and population processes. Consequently, support for the use of multispecies testing has widened to include not only ecologists in academia but environmental scientists in the regulatory and industrial sector as well. The reason for this trend is clear: the additional environmental realism gained from tests utilizing communities of organisms allows for greater insight into the potential hazard of chemicals and other forms of human activity to natural ecosystems that cannot be obtained from single species tests alone. Many of the problems cited for multispecies testing early in their evolution as a hazard assessment tool have been refuted or overcome. In particular, the use of natural microbial communities minimizes several shortcomings typically associated with multispecies toxicity testing. This discussion includes the utility of microcosm and mesocosm tests using aquatic microbial communities as hazard assessment tools in conjunction with accumulating information on their performance in toxicity testing protocols. An increasing body of experimental evidence supports an expansion in the use of these tests for a variety of regulatory and research purposes. A shift in research focus is needed, however, to answer remaining questions and further refine standard protocols for these valuable ecotoxicological tools.

Genotoxicity Tests and Their Contributions in Aquatic Environmental Research

As many chemicals with genotoxic potential are emitted to surface water, genotoxicity tests are gaining importance which led to the development of several techniques to detect directly DNA damage. The relevance of detecting the genotoxic risks associated with water pollution was firstly perceived in the late 1970s. Since that time several tests have been developed for evaluating DNA alterations in aquatic animals. These tests rely on the premise that any changes to DNA may have long-lasting and profound consequences. Sister chromatid test, chromosome aberrations, comet assay, and micronucleus test are currently the most widely employed methods to detect DNA lesions in ecotoxicology. Chromosomal aberration and sister chromatid exchanges are time consuming, resource intensive and require proliferating cell population. Hence, Comet assay and Micronucleus test as cost effective and more sensitive test systems have now been introduced for assessing the genotoxicity of chemicals. This review presents a synthesis of the state of the art in the methodologies of comet assay and micronucleus test and their contributions in aquatic environmental research. The text explores the latest knowledge and thinking on these very important approaches for the assessment of environmental health, management, and conservation. The primary concern of the present review is the measurement of genotoxic potential in aquatic organisms under field and laboratory conditions, where effects of chemicals at different levels of biological organization can be examined.

Problems of Environmental Acceptance Tests on Power Transmission and Transformation Projects

Based on the experience of environmental acceptance tests for power transmission projects, the problems found in acceptance tests and the system shortcomings of acceptance test itself are analyzed. Recommendations are provided to improve the future work.

文献A Successful Strategy for Satellite Development and Testing点评

文章对美国在1998-2002年执行"快,好,省"采购改革方案期间航天器故障率上升146%的3个原因进行了分析与点评。这3个原因包括:对标准、规范严格遵循的意识下降;航天元器件复合度激增;系统工程管理失控。文章对抑制故障率上升的对策进行归纳,其中最重要的一条是:卫星研制工作必须严谨,一丝不苟地按照相关标准进行(环境)试验。

Research on in-situ condition preserved coring and testing systems

As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.

Hydrocarbon test in lower-layer atmosphere to predict deep-sea petroleum or hydrate in the Okinawa Trough: an example

Light hydrocarbon (methane, ethane, propane, butane and CO2) test and C isotopic analysis of CO are conducted for over 100 lower-layer atmospheric samples from the East China Sea slope and the Okinawa Trough. The results show that the lower-layer atmosphere mainly consists of CO2 and then of CH4, and the CO2 concentrations are calculated to have a high average value of 0.87 omega/10(-2) about three times that of the regional background (0-3 omega/10(-2)). The result also shows that the average value of C isotope - 20.8 x 10(-3) is given to the CO2, inferring that it is inorganic gas. Thus, for the future 's work in the Okinawa Trough, special attention should be paid to CO2 hydrate, which is very possibly an important hydrate type.

Fieldwork Test Research of the Impact on Building Physical Environment on Six Types of Atrium Space in Cold Climates

Since the research on verification to passive design strategies in sustainable building is at the initial stage,and its test method and verification conclusion are not scientific enough to validate,this paper proposes the necessity of building physical environmental monitoring to quantitative optimization of passive strategies efficiency from the perspective of architecture design and building environment. Adopting comparative research method,this research chooses six types of atrium space in cold climate in China as a prototype,focusing on building physical environmental performance difference in and between atrium and building main space. Spatial parameters of the atrium space will be divided into four factors: spatial geometry,interfacial properties,internal and external related categories. With subdividing these four factors into sub-factors,this paper makes crosscomparison among the sub-factors to clarify passive strategies effectiveness in atrium. Data comparison analysis shows that Winter atrium passive strategy in cold regions from traditional view is not obvious in practical application,and test data need to be stratified refined in atrium design in case of optimizing passive strategy from building prototype perspective.

5G technology requirements and related test environments for evaluation

To meet the considerably increase of mobile data traffic and wireless communication connections around 2020,the 5th generation(5G)mobile network will necessarily consider more frequency bands,enabling technologies and diversified key performance indicators and test environments comparing with existing network,for example Long Term Evolution.More specifically,the obvious difference between 5G and previous wireless communication system are not only included eMBB(enhance mobile broadband) usage scenario,but also introduced mMTC(massive machine type communications)and URLLC(ultra-reliable and low latency communications) usage scenarios.Hence,in order to evaluate 5G related technologies,some novel test environments will be widely discussed,as well as,certain new key performance indicators will be drawn into5 G evaluation methodology for satisfied new requirements.We will discuss characteristic of these 4 candidate test environments,such as indoor isolated environment,high speed train environment;and the definition of 15 keys performance indicator will be explained and clarified,for example,Throughput,Network Energy Efficiency,Device Connection Density and so on.Furthermore,high-level assessment method of each test environment also will be initially considered.It is notable that an initial evaluation of indoor isolated environment also can be found,which the results show that there are 3 times average cell spectral efficiency than IMT-advanced's in same test environment.

Optimization Model for Environmental Stress Screening of Electronic Components

Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.

The Application of GGE Biplot Analysis for Evaluating Test Locations and Mega-Environment Investigation of Cotton Regional Trials

In the process to the marketing of cultivars, identification of superior test locations within multi-environment variety trial schemes is of critical relevance. It is relevant to breeding organizations as well as to governmental organizations in charge of cultivar registration. Where competition among breeding companies exists, effective and fair multi-environment variety trials are of utmost importance to motivate investment in breeding. The objective of this study was to use genotype main effect plus genotype by environment interaction（GGE） biplot analysis to evaluate test locations in terms of discrimination ability, representativeness and desirability, and to investigate the presence of multiple mega-environments in cotton production in the Yangtze River Valley（YaRV）, China. Four traits（cotton lint yield, fiber length, lint breaking tenacity, micronaire） and two composite selection indices were considered. It was found that the assumption of a single mega-environment in the YaRV for cotton production does not hold. The YaRV consists of three cotton mega-environments： a main one represented by 11 locations and two minor ones represented by two test locations each. This demands that the strategy of cotton variety registration or recommendation must be adjusted. GGE biplot analysis has also led to the identification of test location superior for cotton variety evaluation. Although test location desirable for selecting different traits varied greatly, Jinzhou, Hubei Province, China, was found to be desirable for selecting for all traits considered while Jianyang, Sichuan Province, China, was found to be desirable for none.

Coping with the environmental effects of point-source discharges

Current methods for assessing the environmental impact of point source discharges in the United States are reviewed. The emphasis of many assessments of damage from pollution is shifting from chemical or technological standards to biological standards, i.e., the protection of biological integrity in the receiving system. The importance of integrating information from chemical measurements, toxicity tests, and field surveys in impact assessment is re-emphasized. Ways in which environmental professionals can improve methods for assessing damage from pollution and its control are discussed.

A test method for evaluating the thermal environment of underground coal mine refuge alternatives

Since 2009,the Mine Safety and Health Administration(MSHA)has required mines to install refuge alternatives(RAs)in underground coal mines.One of the biggest concerns with occupied RAs is the possible severity of the resulting thermal environment.In 30 CFR 7.504,the maximum allowable apparent temperature(AT)for an occupied RA is specified as 35℃(95°F).Manufacturers must conduct heat/humidity tests to demonstrate that their RAs meet the 35℃(95°F)AT limit.For these tests,heat input devices are used to input the metabolic heat of actual miners.A wide variety of test methods,sensors,and heat input devices could be used when conducting such tests.Since 2012,the National Institute for Occupational Safety and Health(NIOSH)has conducted over thirty 96-hour heat/humidity tests on four different RAs.This paper discusses the test equipment and procedures used during these investigations.This information is useful for RA manufacturers conducting RA heat/humidity tests,for other researchers investigating RA heat/humidity buildup,and for those who need to assess the thermal environment of any confined space where people may be trapped or are seeking refuge.

Physical characteristics of high concentrated gas hydrate reservoir in the Shenhu production test area,South China Sea

High concentrated and heterogeneous distribution of gas hydrates have been identified in the gas hydrate production test region in the Shenhu area,South China Sea.The gas hydrate-bearing sediments with high saturation locate at two ridges of submarine canyon with different thickness and saturations just above the bottom simulating reflection.The crossplots of gamma ray,acoustic impedance(P-impedance)and porosity at four sites show that the sediments can be divided into the upper and lower layers at different depths,indicating different geotechnical reservoir properties.Therefore,the depositional environments and physical properties at two ridges are analyzed and compared to show the different characteristics of hydrate reservoir.High porosity,high P-wave velocity,and coarse grain size indicate better reservoir quality and higher energy depositional environment for gas hydrate at Sites W18 and W19 than those at Sites W11 and W17.Our interpretation is that the base of canyon deposits at Sites W18 and W19 characterized by upward-coarsening units may be turbidity sand layers,thus significantly improving the reservoir quality with increasing gas hydrate saturation.The shelf and slope sliding deposits compose of the fine-grained sediments at Sites W11 and W17.The gas hydrate production test sites were conducted at the ridge of W11 and W17,mainly because of the thicker and larger area of gas hydrate-bearing reservoirs than those at Sites W18 and W19.All the results provide useful insights for assessing reservoir quality in the Shenhu area.