Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detecti...Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.展开更多
In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Elect...In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.展开更多
Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount significance are the establishment of design princi...Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount significance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active sites.Distinct from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis community.For instance,the well-defined atomic and molecular structures,the good electron affinity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modification have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon ma-terials.As increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent progress.This review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its derivatives.The content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deficiencies of these fullerene-based materials are explicitly elaborated.We conclude it by sharing our perspectives on the key aspects that future efforts shall consider.展开更多
Dislocation structures in a bulk Pb-doped Bi Sr- Ca- Cu- O high temperature superconductor wereimaged. Dislocation morphologies shown by transmission electron microscopy were discussed.
Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distor...Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.展开更多
From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a t...From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a time-dependent failure assessment diagram (TDFAD) isdeveloped on the basis of the time dependent crack tip parameter J integral. According to theproposed TDFAD method, detailed crack initiation and creep crack growth analysis is avoided insafety assessments of high temperature structures by performing simple calculations of stressintensity factor and limit load. To evaluate the creep toughness parameter K_(mat), three differentexpressions are suggested on the basis of experimental load-line displacement, creep crackinitiation and growth parameters as well as the isochronous stress-strain curve. The influence ofservice factors such as temperature and service-time on the proposed TDFAD is discussed by using theproperties of 2.25CrlMo steel and an example is also presented to illustrate the approach.展开更多
This article studies the application of the alternating current field measurement (ACFM) method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect...This article studies the application of the alternating current field measurement (ACFM) method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.展开更多
NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to me...NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to metal charge transfer(LMCT)of photo-excited electrons,which is caused by inherent energy gap(ΔE_(LMCT)).This study synthesized the defective NU(NUXH,where X is the molar equivalent of the modulator)with reducedΔE_(LMCT)through linkers removal via acid treatment.The electronic structure of NUX-H was systematically investigated,and the results indicated that the structural defects in NUX-H strongly altered the environment of the Zr atoms.Furthermore,they substantially lowered the energy of the unoccupied d orbitals(LUMO),which was benefi cial to effi cient LMCT,resulting in an improved photocatalytic activity of NUX-H toward high-concentration(100 mg/L)Cr(VI)reduction.Compared to NU with defect-free structure,the reducing rate of Cr(VI)was increased by 47 times.This work introduced an alternative strategy in terms of designing effi cient photocatalysts for reducing Cr(VI)under ambient conditions.展开更多
In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna...In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.展开更多
The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopo...The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.展开更多
Layered Ni-rich transition metal oxide is treated as the most promising alternative cathode due to their high-capacity and flexible composition.However,the severe lattice strain and slow Li-ion migration kinetics seve...Layered Ni-rich transition metal oxide is treated as the most promising alternative cathode due to their high-capacity and flexible composition.However,the severe lattice strain and slow Li-ion migration kinetics severely restrict their practical application.Herein,a novelty strategy induced pinning effect and defect structure in layered Ni-rich transition metal oxide cathodes is proposed via a facile cation(iron ion)/anion(polyanion)co-doping method.Subsequently,the effects of pinning effect and defect structure on element valence state,crystal structure,morphology,lattice strain,and electrochemical performance during lithiation/delithiation are systematically explored.The detailed characterizations(soft X-ray absorption spectroscopy(sXAS),in-situ X-ray diffraction(XRD),etc.)and density functional theory(DFT)calculation demonstrate that the pinning effects built-in LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)materials by the dual-site occupation of iron ions on lithium and transition metal sites effectively alleviate the abrupt lattice strain caused by an unfavorable phase transition and the subsequent induction of defect structures in the Li layer can greatly reduce the lithium-ion diffusion barrier.Therefore,the modified LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)exhibits a high-capacity of 206.5 mAh g^(-1)and remarkably enhanced capacity retention of 93.9%after 100 cycles,far superior to~14.1%of the pristine cathodes.Besides,an excellent discharge capacity of 180.1 mAh g^(-1)at 10 C rate is maintained,illustrating its remarkable rate capability.This work reports a pinning effect and defect engineering method to suppress the lattice strain and alleviate lithium-ion kinetic barriers in the Ni-rich layered cathodes,providing a roadmap for understanding the fundamental mechanism of an intrinsic activity modulation and structural design of layered cathode materials.展开更多
A set of potential parameters for modeling zircon was obtained by atomistic simulation techniques and a reasonable structural model of zircon was established by fitting some important properties of zircon.Based on the...A set of potential parameters for modeling zircon was obtained by atomistic simulation techniques and a reasonable structural model of zircon was established by fitting some important properties of zircon.Based on the equilibrium configuration of zircon, authors calculated the formation energies of basic point defects and intrinsic disorders. The heats of solution of substituting Pu for Zr showed that there was an immiscible gap at the composition of (Pu75%-Zr25%, in mole fraction), which suggests that the amount of Pu substituting for Zr in zircon be≤50%.展开更多
Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of g...Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of graphene and carbon nanotubes(CNTs) is rarely reported.Herein,3 D neural-like hybrids of graphene(from reduced graphene oxide) and carbon nanotubes(CNTs) have been integrated via sp^(3)-like defect structure by a hydrothermal approach.The sp^(3)-like defect structure endows 3 D nanocarbon hybrids with an enhanced carrier transfer,high structural stability,and electrocatalytic durability.The neural-like structure is shown to demonstrate a cascade effect of charges and significant performances regarding bio-electrocatalysis and lithium-sulfur energy storage.The concept and mechanism of "sp^(3)-like defect structure" are proposed at an atomic/nanoscale to clarify the generation of rational structure as well as the cascade electron transfer.展开更多
A novel defected ground structure (DGS) for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped D...A novel defected ground structure (DGS) for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped DGS. Selectivity is improved by 97.2% with a sharpness factor of 24.6%. The method is applied to the design of a low-pass filter to confirm validity of the proposed DGS.展开更多
Direct visualization of the structural defects in two-dimensional(2D)semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties,but is challenging.Although t...Direct visualization of the structural defects in two-dimensional(2D)semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties,but is challenging.Although traditional atomic resolution imaging techniques,such as transmission electron microscopy and scanning tunneling microscopy,can directly image the structural defects,they provide only local-scale information and require complex setups.Here,we develop a simple,non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale,including both point defects and grain boundaries.Utilizing this method,we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples,providing key insights into the device functions.Furthermore,the etching method we developed is anisotropic and tunable,opening up opportunities to obtain exotic edge states on demand.展开更多
We theoretically investigate the transmission spectra and the field distributions with different defects in the gold nanotube arrays by using the finite-difference time-domain method. It is found that the optical prop...We theoretically investigate the transmission spectra and the field distributions with different defects in the gold nanotube arrays by using the finite-difference time-domain method. It is found that the optical properties of the nanotube arrays are strongly influenced by different defects. When there are no defects in the central nanotube, the values of peaks located at both sides of the photonic band gap have their maxima. Based on the distributions of electric field component Ex and the total energy distribution of the electric and the magnetic field, we show that mainly a dipole field distribution is exhibited for the plasmon mode at the long-wavelength edge of the band gap but higher order modes of the composite are excited at the short-wavelength edge of the band gap. The plasmon resonant modes can also be controlled by introducing defects.展开更多
It is well known that for technological application,a great effort has been done to enchance Jvalue ofsuperconducting YBaCuO sintered bulk.Except oxygen content,the main problem for increasing critical cur-rent densit...It is well known that for technological application,a great effort has been done to enchance Jvalue ofsuperconducting YBaCuO sintered bulk.Except oxygen content,the main problem for increasing critical cur-rent density Jis to eliminate the weak link and to control crystallographic anisotropy.It is necessary tomake YBaCuO superconducting bulk have a strong texture with C-axis orientation.Since Jin et al.has suc-展开更多
Anti-structured defects bridge atom migration among heterogeneous sublattices facilitating diffusion but could also result in the collapse of ordered structure.Component distribution Ni(75)AlxV(25-x) alloys are in...Anti-structured defects bridge atom migration among heterogeneous sublattices facilitating diffusion but could also result in the collapse of ordered structure.Component distribution Ni(75)AlxV(25-x) alloys are investigated using a microscopic phase field model to illuminate relations between anti-structured defects and composition,precipitate order,precipitate type,and phase stability.The Ni(75)AlxV(25-x) alloys undergo single Ni3V(stage Ⅰ),dual Ni3Al and Ni3V(stage Ⅱ with Ni3V prior;and stage Ⅲ with Ni3Al prior),and single Ni3Al(stage Ⅳ) with enhanced aluminum level.For Ni3V phase,anti-structured defects(V(Ni1),Niy,except V(Ni2)) and substitution defects(Al(Ni1),Al(Ni2),Alv) exhibit a positive correlation to aluminum in stage I,the positive trend becomes to negative correlation or smooth during stage Ⅱ.For Ni3 Al phase,anti-structured defects(Al(Ni),Ni(Al)) and substitution defects(V(Ni),V(Al)) have a positive correlation to aluminum in stage Ⅱ,but Ni(Al) goes down since stage Ⅲ and lasts to stage Ⅳ.V(Ni) and V(Al) fluctuate when Ni3Al precipitates prior,but go down drastically in stageⅣ.Precipitate type conversion of single Ni3V/dual(Ni3V+Ni3Al) affects Ni3V defects,while dual(Ni3V+Ni3Al)/single Ni3 Al has little effect on Ni3Al defects.Precipitate order swap occurred in the dual phase region affects on Ni3Al defects but not on Ni3V.展开更多
Ti_3AlC_2 samples are irradiated in advance by 3.5 MeV Fe-ion to the fluence of 1.0×10^(16) ion/cm^2,and then are implanted by 500 keV He-ion with the fluence of 1.0×10^(17) ion/cm^2 at room temperature....Ti_3AlC_2 samples are irradiated in advance by 3.5 MeV Fe-ion to the fluence of 1.0×10^(16) ion/cm^2,and then are implanted by 500 keV He-ion with the fluence of 1.0×10^(17) ion/cm^2 at room temperature.The irradiated samples are investigated by grazing incidence x-ray diffraction(GIXRD) and transmission electron microscopy(TEM).GIXRD results show serious structural distortion,but without amorphization in the irradiated samples.Fe-ion irradiation and He-ion implantation create much more serious structural distortion than single Fe-ion irradiation.TEM results reveal that there are a large number of defect clusters in the damage region,and dense spherical He bubbles appear in the He depositional region.It seems that the pre-damage does not influence the growth of He bubbles,but He-ion implantation influences the pre-created defect configurations.展开更多
Concrete piles that were poorly constructed or analyzed in their soil analyses may have structural or geotechnical defects.To examine such defects,an experimental study was conducted to investigate how a defective rei...Concrete piles that were poorly constructed or analyzed in their soil analyses may have structural or geotechnical defects.To examine such defects,an experimental study was conducted to investigate how a defective reinforced concrete pile behaved.These piles were installed and subjected to a compression axial load in the sand that had relative densities of 30%,60%,and 80%.The tests were performed using four concrete model piles:one intact pile and the other three piles had a structural defect(necking)at three different positions of the pile at(0.25 L from the top,center,and 0.25 L bottom).Geotechnical defect(soft layer or debris)was studied using Styrofoam layer at various vertical distances under the pile toe with Y/D=(0,0.5,1 and 1.5)D.The test results showed that the bearing capacity of the structural defect was the most in the case of a neck at 0.25 L from the bottom,followed by a neck at the center,and finally a neck at 0.25 L from the top.In the case of a geotechnical defect,the bearing capacity of the pile decreased with the decrease of the vertical distance between the soft layer and the pile toe.展开更多
文摘Structural development defects essentially refer to code structure that violates object-oriented design principles. They make program maintenance challenging and deteriorate software quality over time. Various detection approaches, ranging from traditional heuristic algorithms to machine learning methods, are used to identify these defects. Ensemble learning methods have strengthened the detection of these defects. However, existing approaches do not simultaneously exploit the capabilities of extracting relevant features from pre-trained models and the performance of neural networks for the classification task. Therefore, our goal has been to design a model that combines a pre-trained model to extract relevant features from code excerpts through transfer learning and a bagging method with a base estimator, a dense neural network, for defect classification. To achieve this, we composed multiple samples of the same size with replacements from the imbalanced dataset MLCQ1. For all the samples, we used the CodeT5-small variant to extract features and trained a bagging method with the neural network Roberta Classification Head to classify defects based on these features. We then compared this model to RandomForest, one of the ensemble methods that yields good results. Our experiments showed that the number of base estimators to use for bagging depends on the defect to be detected. Next, we observed that it was not necessary to use a data balancing technique with our model when the imbalance rate was 23%. Finally, for blob detection, RandomForest had a median MCC value of 0.36 compared to 0.12 for our method. However, our method was predominant in Long Method detection with a median MCC value of 0.53 compared to 0.42 for RandomForest. These results suggest that the performance of ensemble methods in detecting structural development defects is dependent on specific defects.
文摘In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.
基金This study is supported by the National Natural Science Foundation of China(21925104)the Natural Science Foun-dation of Hubei Province(2021CFA020)the start-up funding of Huazhong University of Science and Technology(3004110178).
文摘Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion technologies.Of paramount significance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active sites.Distinct from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis community.For instance,the well-defined atomic and molecular structures,the good electron affinity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modification have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon ma-terials.As increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent progress.This review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its derivatives.The content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deficiencies of these fullerene-based materials are explicitly elaborated.We conclude it by sharing our perspectives on the key aspects that future efforts shall consider.
文摘Dislocation structures in a bulk Pb-doped Bi Sr- Ca- Cu- O high temperature superconductor wereimaged. Dislocation morphologies shown by transmission electron microscopy were discussed.
基金This work was supported by the Research Program through the National Research Foundation of Korea,NRF-2019R1A2C1005920,S.K.
文摘Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.
文摘From the idea of failure of defective structures at high temperature beingcontrolled by two mechanisms: fast fracture due to creep crack growth initiating at the crack tipand creep rupture on the weakened section, a time-dependent failure assessment diagram (TDFAD) isdeveloped on the basis of the time dependent crack tip parameter J integral. According to theproposed TDFAD method, detailed crack initiation and creep crack growth analysis is avoided insafety assessments of high temperature structures by performing simple calculations of stressintensity factor and limit load. To evaluate the creep toughness parameter K_(mat), three differentexpressions are suggested on the basis of experimental load-line displacement, creep crackinitiation and growth parameters as well as the isochronous stress-strain curve. The influence ofservice factors such as temperature and service-time on the proposed TDFAD is discussed by using theproperties of 2.25CrlMo steel and an example is also presented to illustrate the approach.
基金supported by the National Natural Science Foundation of China(Grant No.50905187)the Shandong Provincial Natural Science Foundation(Grant No.ZR2009FQ001)
文摘This article studies the application of the alternating current field measurement (ACFM) method in defect detection for underwater structures. Numerical model of the ACFM system is built for structure surface defect detection in seawater environment. Finite element simulation is performed to investigate rules and characteristics of the electromagnetic signal distribution in the defected area. In respect of the simulation results, underwater artificial crack detection experiments are designed and conducted for the ACFM system. The experiment results show that the ACFM system can detect cracks in underwater structures and the detection accuracy is higher than 85%. This can meet the engineering requirement of underwater structure defect detection. The results in this article can be applied to establish technical foundation for the optimization and development of ACFM based underwater structure defects detection system.
基金This work was supported by the National Key Research and Development Program of China(No.2020YFA0211000)the National Natural Science Foundation of China(Nos.21876114,21761142011,and 51572174)+3 种基金the Shanghai Government(Nos.19DZ1205102 and 19160712900)the International Joint Laboratory on Resource Chemistry(No.IJLRC)the Ministry of Education of China(No.PCSIRT_IRT_16R49)This research was also supported by The Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning,the Shuguang Research Program of Shanghai Education Committee,and the Shanghai Engineering Research Center of Green Energy Chemical Engineering(No.18DZ2254200).
文摘NH_(2)-UIO66(NU)is a promising photocatalyst for the reduction of Cr(VI)to low-toxic Cr(III)driven by visible light under ambient conditions.However,the main limitation in this process is the ineffi cient ligand to metal charge transfer(LMCT)of photo-excited electrons,which is caused by inherent energy gap(ΔE_(LMCT)).This study synthesized the defective NU(NUXH,where X is the molar equivalent of the modulator)with reducedΔE_(LMCT)through linkers removal via acid treatment.The electronic structure of NUX-H was systematically investigated,and the results indicated that the structural defects in NUX-H strongly altered the environment of the Zr atoms.Furthermore,they substantially lowered the energy of the unoccupied d orbitals(LUMO),which was benefi cial to effi cient LMCT,resulting in an improved photocatalytic activity of NUX-H toward high-concentration(100 mg/L)Cr(VI)reduction.Compared to NU with defect-free structure,the reducing rate of Cr(VI)was increased by 47 times.This work introduced an alternative strategy in terms of designing effi cient photocatalysts for reducing Cr(VI)under ambient conditions.
文摘In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.
文摘The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.
基金financially supported by the Science and Technology of Guangxi Zhuang Autonomous Region(the Guangxi special Fund for Scientific Center and Talent Resources:AD18281073,Chongke 2018AD15002 and FA2020011)。
文摘Layered Ni-rich transition metal oxide is treated as the most promising alternative cathode due to their high-capacity and flexible composition.However,the severe lattice strain and slow Li-ion migration kinetics severely restrict their practical application.Herein,a novelty strategy induced pinning effect and defect structure in layered Ni-rich transition metal oxide cathodes is proposed via a facile cation(iron ion)/anion(polyanion)co-doping method.Subsequently,the effects of pinning effect and defect structure on element valence state,crystal structure,morphology,lattice strain,and electrochemical performance during lithiation/delithiation are systematically explored.The detailed characterizations(soft X-ray absorption spectroscopy(sXAS),in-situ X-ray diffraction(XRD),etc.)and density functional theory(DFT)calculation demonstrate that the pinning effects built-in LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)materials by the dual-site occupation of iron ions on lithium and transition metal sites effectively alleviate the abrupt lattice strain caused by an unfavorable phase transition and the subsequent induction of defect structures in the Li layer can greatly reduce the lithium-ion diffusion barrier.Therefore,the modified LiNi_(0.9)Co_(0.05)Mn_(0.05)O_(2)exhibits a high-capacity of 206.5 mAh g^(-1)and remarkably enhanced capacity retention of 93.9%after 100 cycles,far superior to~14.1%of the pristine cathodes.Besides,an excellent discharge capacity of 180.1 mAh g^(-1)at 10 C rate is maintained,illustrating its remarkable rate capability.This work reports a pinning effect and defect engineering method to suppress the lattice strain and alleviate lithium-ion kinetic barriers in the Ni-rich layered cathodes,providing a roadmap for understanding the fundamental mechanism of an intrinsic activity modulation and structural design of layered cathode materials.
文摘A set of potential parameters for modeling zircon was obtained by atomistic simulation techniques and a reasonable structural model of zircon was established by fitting some important properties of zircon.Based on the equilibrium configuration of zircon, authors calculated the formation energies of basic point defects and intrinsic disorders. The heats of solution of substituting Pu for Zr showed that there was an immiscible gap at the composition of (Pu75%-Zr25%, in mole fraction), which suggests that the amount of Pu substituting for Zr in zircon be≤50%.
基金a joint National Natural Science Foundation of China-Deutsche Forschungsgemeinschaft(NSFC-DFG) project(NSFC grant 51861135313,DFG JA466/39-1)supported by National Natural Science Foundation of China(21706199)International Science & Technology Cooperation Program of China(2015DFE52870)Jilin Province Science and Technology Development Plan(20180101208JC)。
文摘Three-dimensional(3 D) hybrid of nanocarbons is a very promising way to the high-performance design of electrocatalysis materials.However,sp^(3)-like defect structure,a combination of high strength and conduction of graphene and carbon nanotubes(CNTs) is rarely reported.Herein,3 D neural-like hybrids of graphene(from reduced graphene oxide) and carbon nanotubes(CNTs) have been integrated via sp^(3)-like defect structure by a hydrothermal approach.The sp^(3)-like defect structure endows 3 D nanocarbon hybrids with an enhanced carrier transfer,high structural stability,and electrocatalytic durability.The neural-like structure is shown to demonstrate a cascade effect of charges and significant performances regarding bio-electrocatalysis and lithium-sulfur energy storage.The concept and mechanism of "sp^(3)-like defect structure" are proposed at an atomic/nanoscale to clarify the generation of rational structure as well as the cascade electron transfer.
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.T0102)
文摘A novel defected ground structure (DGS) for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped DGS. Selectivity is improved by 97.2% with a sharpness factor of 24.6%. The method is applied to the design of a low-pass filter to confirm validity of the proposed DGS.
基金the Key-Area Research and Development Program of Guangdong Province,China(Grant No.2020B0101340001)the Strategic Priority Research Program of Chinese Academy of Sciences(CAS)(Grant No.XDB30000000)the National Natural Science Foundation of China(Grant Nos.61888102 and 11834017)。
文摘Direct visualization of the structural defects in two-dimensional(2D)semiconductors at a large scale plays a significant role in understanding their electrical/optical/magnetic properties,but is challenging.Although traditional atomic resolution imaging techniques,such as transmission electron microscopy and scanning tunneling microscopy,can directly image the structural defects,they provide only local-scale information and require complex setups.Here,we develop a simple,non-invasive wet etching method to directly visualize the structural defects in 2D semiconductors at a large scale,including both point defects and grain boundaries.Utilizing this method,we extract successfully the defects density in several different types of monolayer molybdenum disulfide samples,providing key insights into the device functions.Furthermore,the etching method we developed is anisotropic and tunable,opening up opportunities to obtain exotic edge states on demand.
基金Project supported by the Scientific Research Foundation of Hunan Provincial Education Department,China (Grant Nos. 11C0425 and 09C314)the Natural Science Foundation of Hunan Province,China (Grant No. 10JJ3088)+1 种基金the Major Program for the Research Foundation of Education Bureau of Hunan Province,China (Grant No. 10A026)the National Natural Science Foundation of China (Grant No. 11164007)
文摘We theoretically investigate the transmission spectra and the field distributions with different defects in the gold nanotube arrays by using the finite-difference time-domain method. It is found that the optical properties of the nanotube arrays are strongly influenced by different defects. When there are no defects in the central nanotube, the values of peaks located at both sides of the photonic band gap have their maxima. Based on the distributions of electric field component Ex and the total energy distribution of the electric and the magnetic field, we show that mainly a dipole field distribution is exhibited for the plasmon mode at the long-wavelength edge of the band gap but higher order modes of the composite are excited at the short-wavelength edge of the band gap. The plasmon resonant modes can also be controlled by introducing defects.
文摘It is well known that for technological application,a great effort has been done to enchance Jvalue ofsuperconducting YBaCuO sintered bulk.Except oxygen content,the main problem for increasing critical cur-rent density Jis to eliminate the weak link and to control crystallographic anisotropy.It is necessary tomake YBaCuO superconducting bulk have a strong texture with C-axis orientation.Since Jin et al.has suc-
基金Project supported by the Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2016JQ5014)the Fundamental Research Funds for the Central Universities,China(Grant No.3102014JCQ01024)+2 种基金the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China(Grant No.114-QP-2014)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20136102120021)the National Natural Science Foundation of China(Grant Nos.51474716 and 51475378)
文摘Anti-structured defects bridge atom migration among heterogeneous sublattices facilitating diffusion but could also result in the collapse of ordered structure.Component distribution Ni(75)AlxV(25-x) alloys are investigated using a microscopic phase field model to illuminate relations between anti-structured defects and composition,precipitate order,precipitate type,and phase stability.The Ni(75)AlxV(25-x) alloys undergo single Ni3V(stage Ⅰ),dual Ni3Al and Ni3V(stage Ⅱ with Ni3V prior;and stage Ⅲ with Ni3Al prior),and single Ni3Al(stage Ⅳ) with enhanced aluminum level.For Ni3V phase,anti-structured defects(V(Ni1),Niy,except V(Ni2)) and substitution defects(Al(Ni1),Al(Ni2),Alv) exhibit a positive correlation to aluminum in stage I,the positive trend becomes to negative correlation or smooth during stage Ⅱ.For Ni3 Al phase,anti-structured defects(Al(Ni),Ni(Al)) and substitution defects(V(Ni),V(Al)) have a positive correlation to aluminum in stage Ⅱ,but Ni(Al) goes down since stage Ⅲ and lasts to stage Ⅳ.V(Ni) and V(Al) fluctuate when Ni3Al precipitates prior,but go down drastically in stageⅣ.Precipitate type conversion of single Ni3V/dual(Ni3V+Ni3Al) affects Ni3V defects,while dual(Ni3V+Ni3Al)/single Ni3 Al has little effect on Ni3Al defects.Precipitate order swap occurred in the dual phase region affects on Ni3Al defects but not on Ni3V.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11405231 and 91426301
文摘Ti_3AlC_2 samples are irradiated in advance by 3.5 MeV Fe-ion to the fluence of 1.0×10^(16) ion/cm^2,and then are implanted by 500 keV He-ion with the fluence of 1.0×10^(17) ion/cm^2 at room temperature.The irradiated samples are investigated by grazing incidence x-ray diffraction(GIXRD) and transmission electron microscopy(TEM).GIXRD results show serious structural distortion,but without amorphization in the irradiated samples.Fe-ion irradiation and He-ion implantation create much more serious structural distortion than single Fe-ion irradiation.TEM results reveal that there are a large number of defect clusters in the damage region,and dense spherical He bubbles appear in the He depositional region.It seems that the pre-damage does not influence the growth of He bubbles,but He-ion implantation influences the pre-created defect configurations.
文摘Concrete piles that were poorly constructed or analyzed in their soil analyses may have structural or geotechnical defects.To examine such defects,an experimental study was conducted to investigate how a defective reinforced concrete pile behaved.These piles were installed and subjected to a compression axial load in the sand that had relative densities of 30%,60%,and 80%.The tests were performed using four concrete model piles:one intact pile and the other three piles had a structural defect(necking)at three different positions of the pile at(0.25 L from the top,center,and 0.25 L bottom).Geotechnical defect(soft layer or debris)was studied using Styrofoam layer at various vertical distances under the pile toe with Y/D=(0,0.5,1 and 1.5)D.The test results showed that the bearing capacity of the structural defect was the most in the case of a neck at 0.25 L from the bottom,followed by a neck at the center,and finally a neck at 0.25 L from the top.In the case of a geotechnical defect,the bearing capacity of the pile decreased with the decrease of the vertical distance between the soft layer and the pile toe.