Liquefaction susceptibility and deformation characteristics of saturated coral sandy soils subjected to cyclic loadings-a critical review

Coral sandy soils widely exist in coral island reefs and seashores in tropical and subtropical regions.Due to the unique marine depositional environment of coral sandy soils,the engineering characteristics and responses of these soils subjected to monotonic and cyclic loadings have been a subject of intense interest among the geotechnical and earthquake engineering communities.This paper critically reviews the progress of experimental investigations on the undrained behavior of coral sandy soils under monotonic and cyclic loadings over the last three decades.The focus of coverage includes the contractive-dilative behavior,the pattern of excess pore-water pressure(EPWP)generation and the liquefaction mechanism and liquefaction resistance,the small-strain shear modulus and strain-dependent shear modulus and damping,the cyclic softening feature,and the anisotropic characteristics of undrained responses of saturated coral sandy soils.In particular,the advances made in the past decades are reviewed from the following aspects:(1)the characterization of factors that impact the mechanism and patterns of EPWP build-up;(2)the identification of liquefaction triggering in terms of the apparent viscosity and the average flow coefficient;(3)the establishment of the invariable form of strain-based,stress-based,or energy-based EPWP ratio formulas and the unique relationship between the new proxy of liquefaction resistance and the number of cycles required to reach liquefaction;(4)the establishment of the invariable form of the predictive formulas of small strain modulus and strain-dependent shear modulus;and(5)the investigation on the effects of stress-induced anisotropy on liquefaction susceptibility and dynamic deformation characteristics.Insights gained through the critical review of these advances in the past decades offer a perspective for future research to further resolve the fundamental issues concerning the liquefaction mechanism and responses of coral sandy sites subjected to cyclic loadings associated with seismic events in marine environments.

Deformation Characteristics of Hydrate-Bearing Sediments

The safe and efficient development of natural gas hydrate requires a deep understanding of the deformation behaviors of reservoirs.In this study,a series of triaxial shearing tests are carried out to investigate the deformation properties of hydrate-bearing sediments.Variations of volumetric and lateral strains versus hydrate saturation are analyzed comprehensively.Results indicate that the sediments with high hydrate saturation show dilative behaviors,which lead to strain-softening characteristics during shearing.The volumetric strain curves have a tendency to transform gradually from dilatation to compression with the increase in effective confining pressure.An easy prediction model is proposed to describe the relationship between volumetric and axial strains.The model coefficientβis the key dominating factor for the shape of volumetric strain curves and can be determined by the hydrate saturation and stress state.Moreover,a modified model is established for the calculation of lateral strain.The corresponding determination method is provided for the easy estimation of model coefficients for medium sand sediments containing hydrate.This study provides a theoretical and experimental reference for deformation estimation in natural gas hydrate development.

Pore structure of low‑permeability coal and its deformation characteristics during the adsorption–desorption of CH4/N2

The pore structure of coal plays a key role in controlling the storage and migration of CH4/N2.The pore structure of coal is an important indicator to measure the gas extraction capability and the gas displacement efect of N2 injection.The deformation characteristic of coal during adsorption–desorption of CH4/N2 is an important factor afecting CH4 pumpability and N2 injectability.The pore structure characteristics of low-permeability coal were obtained by fuid intrusion method and photoelectric radiation technology.The multistage and connectivity of coal pores were analyzed.Subsequently,a simultaneous test experiment of CH4/N2 adsorption–desorption and coal deformation was carried out.The deformation characteristics of coal were clarifed and a coal strain model was constructed.Finally,the applicability of low-permeability coal to N2 injection for CH4 displacement technology was investigated.The results show that the micropores and transition pores of coal samples are relatively developed.The pore morphology of coal is dominated by semi-open pores.The pore structure of coal is highly complex and heterogeneous.Transition pores,mesopores and macropores of coal have good connectivity,while micropores have poor connectivity.Under constant triaxial stress,the adsorption capacity of the coal for CH4 is greater than that for N2,and the deformation capacity of the coal for CH4 adsorption is greater than that for N2 adsorption.The axial strain,circumferential strain,and volumetric strain during the entire process of CH4 and N2 adsorption/desorption in the coal can be divided into three stages.Coal adsorption–desorption deformation has the characteristics of anisotropy and gas-diference.A strain model for the adsorption–desorption of CH4/N2 from coal was established by considering the expansion stress of adsorbed gas on the coal matrix,the compression stress of free gas on the coal matrix,and the expansion stress of free gas on micropore fractures.N2 has good injectability in low-permeability coal seams and has the dual functions of improving coal seam permeability and enhancing gas fow,which can signifcantly improve the efectiveness of low-permeability coal seam gas control and promote the efcient utilization of gas resources.

Study on magneto-elastic-plastic deformation characteristics of ferromagnetic rectangular plate with simple supports

In this paper, the magnetic-elastic-plastic deformation behavior is studied for a ferromagnetic plate with simple supports. The perturbation formula of magnetic force is first derived based on the perturbation technique, and is then applied to the analysis of deformation characteristics with emphasis laid on the analyses of modes, symmetry of deformation and influences of incident angle of applied magnetic field on the plate deformation. The theoretical analyses offer explanations why the configuration offer- romagnetic rectangular plate with simple supports under an oblique magnetic field is in-wavy type along the x-direction, and why the largest deformation of the ferromagnetic plate occurs at the incident angle of 45°for the magnetic field. A numerical code based on the finite element method is developed to simulate quantitatively behaviors of the nonlinearly coupled multi-field problem. Some characteristic curves are plotted to illustrate the magneto--elastic-plastic deflections, and to reveal how the deflections can be influenced by the incident angle of applied magnetic field. The deformation characteristics obtained from the numerical simulations are found in good agreement with the theoretical analyses.

Deformation characteristics and thresholds of the Tanjiawan landslide in the Three Gorges Reservoir Area,China

Since the first impoundment of the Three Gorges Reservoir(TGR)in China in 2003,more than 5000 landslides including potential landslides were identified.In this paper,a deep-seated active landslide in TGR area was analyzed.Fourteen years’monitoring data and field investigations from 2006 to 2020 were used to analyze the deformation characteristics,influencing factors,and meteohydrological thresholds.The landslide showed a none-overall periodic movement pattern featuring acceleration during long-duration rainfall and rapid transition to constant creep after rainfall events.Two secondary sliding masses,No.1 and No.2,were defined via field investigation.The reservoir has no impact on the deformation whereas long-duration-low-intensity rainfall is the main factor.At present,the cumulative displacements of the main sliding mass range from 0.9 to 3.2 m,and the deformation during the rainy season is gradually increasing.The boundary of this landslide was formed,and the boundary of No.2 sliding mass became obvious.The probability of the failure of sliding mass No.2 is very high under the conditions of continuous rainfall.The 15-day antecedent rainfall combined with 4-day cumulative rainfall could be the rainfall threshold which could be associated with the groundwater level S1 of 294 m above sea level for forecasting large deformation of Tanjiawan landslide.

Regional crustal deformation characteristic before 2016 Yuncheng M4.4 earthquake swarm based on CMONOC continuous GPS data

To further study regional deformation characteristic in the southeast margin of Ordos Block during the period between the Alanshan M5.8 and Yuncheng M4.4 earthquake swarm, we analyze continuous GPS sites around the study area. The time-varying strain parameters removed a linear trend deviated from the background state in varying degrees since April, 2015, and began to turn back at the end of the year 2015, meanwhile, the maximum extension strain and shear strain have the bigger variation relative to others. The GPS measurement also shows that the eastward displacement rate of the stations decreases during 2015-2016 in varying degrees compared to 2011-2015, and the variation is closely related to its geologic structural location. The differential movement between the stations is converted into regional strain accumulation due to the fault locking. Further- more, during 2015-2016, the maximum extension rate oriented at near NS direction obviously increased, and the maximum contraction strain direction is changed from NW to EW direction, which contributes to strengthen extension and shear strain of the NE- striking faults, it＇s consistent with the regional background strain state of Shanxi seismic zone, this may be an important contributor to occurrence of M4.4 earthquake swarm in Yuncheng basin.

Simulation and Experimental Study on Load-bearing Deformation Characteristics of 11R22.5 Vehicle Retreaded Tire

The finite element bearing deformation simulation was implemented on 11.00R22.5 retreaded tires by ANSYS software in the paper in order to further clarify the bearing deformation characteristics of retreaded tires and improve the performance of retreaded tires effectively.The characteristic laws of bearing radial deformation and bearing lateral deformation of retreaded tire and new tires of the same model under different working conditions were obtained through load deformation tests.The radial deformation calculation results,simulation results and measured results of retreaded tires were comparatively analyzed.The calculation formula of bearing radial deformation of retreaded tires was proposed based on the linear regression principle.The difference of bearing deformation characteristics and ground area characteristics of retreaded tires and new tires were comparatively analyzed.The results showed that the radial and lateral deformation of retreaded tires and new tires is increased with the increase of radial load when the tire pressure was constant,and the increase trend is approximately linear.The radial stiffness of retreaded tires is similar to that of new tires under certain tire pressure and low load.The radial stiffness of retreaded tires is larger than that of new tires,and the stiffness difference is increased with the increasing of load under constant tire pressure and high load.Rubber aging phenomenon in retreaded tire carcass have an impact on the bearing deformation characteristics of retreaded tires,thereby producing great impact on the remaining service life of retreaded tires.

Deformation characteristic of semi-solid ZCuSn10 copper alloy during isothermal compression

The compression tests were carried out by Gleeble-1500 thermo-mechanical simulator with samples of semi-solid ZCuSnl0 alloy prepared by strain-induced melt activation （SIMA） process. The original microstruc- ture and the deformation temperature of semi-solid ZCuSnl0 alloy are different. The strain is 0.2, and the strain rate is 1 s-1 for the compression test. The results show that when the semi-solid ZCuSnl0 alloy was pre- pared by SIMA process, the liquid fraction of semi-solid microstructure increases, and the solid grain is smaller, more uniform and more inclined to be round as the roiling pre-deformation increasing. The results also indicate that the deformation resistance of ZCuSnl0 alloy in semi-solid state decreases with the deformation temperature increas- ing or the solid fraction of original microstructure de- creasing. The stress-strain curves of the isothermal compression can be divided into quasi-elastic deformation stage and plastic deformation stage, and there are three deformation zones in the samples after isothermal com- pression, namely the difficult deformation zone, the large deformation zone and the free deformation zone. In the three deformation zones, the main deformation mechanism is flow of liquid incorporating solid particles （FLS） mechanism, plastic deformation of solid particles （PDS） mechanism and liquid flow （LF） combining with FLS mechanism, respectively.

Experimental investigation on the deformation characteristics of locking-steel-pipe(LSP)pile retaining structure during excavation in sand

Locking-steel-pipe(LSP)piles connect with adjacent joints to form a pile row enclosure structure.Due to the advantages of quick construction,efficiency in installation,and recycle utilization,the connected LSP piles are frequently used as retaining structure in deep excavation.However,systematic studies of the deformation mechanism of the LSP pile retaining structure are rarely reported,and it still lack of experimental evidence to optimize the design.In this study,a braced supported excavation experimental model test in sand was designed and conducted to investigate the deformation characteristics of LSP pile retaining structure.Three dimensional(3D)printing technique was creatively applied to manufacture LSP model piles.The experimental results show that,a“S”shaped distribution of bending moments is observed along pile shaft when excavation is executed;the deflection of pile shaft develops deep-seated movements toward the excavation side as excavation went deeper,resulting in a“bowl”ground settlement.With the deflection of LSP piles,a rotating trend was occurred between pairs of locking joint,and the severe open deformation of locking joint arose on excavation side.There was a gradual reduction in earth pressure behind the LSP pile retaining wall with excavation depth.The earth pressure between two struts level had no obvious changing,owing to the supported effect of inner struts.

The deformation characteristics and flow field around knotless polyethylene netting based on fluid structure interaction(FSI)one-way coupling

Knotless polyethylene(PE)netting is widely used in fisheries because of its excellent hydrodynamic performance and low cost.Netting deformation and the surrounding flow field distribution play an important role in determining the hydrodynamic characteristics of netting in moving water.In order to investigate the effect of solidity ratio and attack angle on drag,netting deformation,and flow field distribution through the netting,a fluid-structure interaction(FSI)model based on a one-way coupling combining the shear stress turbulent(SST)k-omega model and the large deformation nonlinear structural finite element model was evaluated.Our results showed the difference between the parallel and normal drag forces found in the present numerical model and experimental flume tank data were 9.17%and 11.58%,respectively.The mean relative error in the inclined hydrodynamic drag for different flow velocities and attack angles was 8.35%,6.69%,and 5.37%for the nettings 1,2,and 3,respectively.These results show that the present numerical simulation based on FSI one-way coupling can be used to examine hydrodynamic forces on netting.The flow simulation results show that there is a noticeable flow velocity decrease through the netting and a rather large velocity reduction region downstream from the netting for different attack angles.These results reveal the existence of turbulent flow due to the netting wake.It was found that the equivalent stress and total deformation increase as the flow velocity increases and solidity ratio decreases.

Deformation and failure mechanism of Yanjiao rock slope influenced by rainfall and water level fluctuation of the Xiluodu hydropower station reservoir

With the construction of the Xiluodu hydropower station on the Jinsha River,the reservoir impoundment began in 2013 and the water level fluctuates annually between 540 m and 600 m above sea level.The Yanjiao rock slope which is located on the left bank of the Jinsha River 75 km upstream of the Xiluodu dam site,began to deform in 2014.The potential failure of the slope not only threatens Yanjiao town but also affects the safe operation of the Xiluodu reservoir.This paper is to find the factors influencing the Yanjiao slope deformation through field investigation,geotechnical reconnaissance,and monitoring.Results show that the Yanjiao slope can be divided into a bank collapse area(BCA)and a strong deformation area(SDA)based on the crack distribution characteristics of the slope.The rear area of the slope has been experiencing persistent deformation with a maximum cumulative displacement(GPS monitoring point G4)of 505 mm and 399 mm in the horizontal and vertical directions,respectively.The potential failure surface of the slope is formed 36 m below the surface based on the borehole inclinometer.The bank collapses of the Yanjiao slope are directly caused by the reservoir impoundment while the deformation area of the slope is affected by the combination of the rainfall and reservoir water level fluctuation.Based on mechanism of the Yanjiao slope,prestressed anchor combined with the surface drainage and slope unloading are recommended to prevent potential deformation.

NUMERICAL SIMULATION ON DEFORMATION CHARACTERISTICS OF AS WIRE BY CASTEX

Castex(continuous cast and extrusion)is a latest metallurgical technology Making of AS wire(aluminum clad steel wire) by Castex is an advanced bonding technology of bimetal In order to study the deformation character of AS wire the numerical simulation is performed with FE method From the simulation result the following conclusions are obtained:① The simulation is carried out sequentially in three zones:initial extrusion,cavity filling and bonding ② In the first zone the shearing deformation governs the whole zone,while in that of cavity filling, the deformation mainly concentrates on transition arc of the concave mould In addition, in the last zone, the dominant deformation lies at the boundary of concave mould, surface of steel wire and entry of sizing band Due to the movement of steel wire, the direction of shear stress on its surface is opposite to that on the boundary of concave die

Failure characteristics and the damage evolution of a composite bearing structure in pillar-side cemented paste backfilling

A backfilling body-coal pillar-backfilling body(BPB)structure formed by pillar-side cemented paste backfilling can bear overburden stress and ensure safe mining.However,the failure response of BPB composite samples must be investigated.This paper examines the deformation characteristics and damage evolution of six types of BPB composite samples using a digital speckle correlation method under uniaxial compression conditions.A new damage evolution equation was established on the basis of the input strain energy and dissipated strain energy at the peak stress.The prevention and control mechanisms of the backfilling body on the coal pillar instability were discussed.The results show that the deformation localization and macroscopic cracks of the BPB composite samples first appeared at the coal-backfilling interface,and then expanded to the backfilling elements,ultimately appearing in the coal elements.The elastic strain energy in the BPB composite samples reached a maximum at the peak stress,whereas the dissipated energy continued to accumulate and increase.The damage evolution curve and equation agree well with the test results,providing further understanding of instability prevention and the control mechanisms of the BPB composite samples.The restraining effect on the coal pillar was gradually reduced with decreasing backfilling body element's volume ratio,and the BPB composite structure became more vulnerable to failure.This research is expected to guide the design,stability monitoring,instability prevention,and control of BPB structures in pillar-side cemented paste backfilling mining.

Effects of confining pressure and temperature on strength and deformation behavior of frozen saline silty clay

Buildings are always affected by frost heave and thaw settlement in cold regions,even where saline soil is present.This paper describes the triaxial testing results of frozen silty clay with high salt content and examines the in-fluence of confining pressure and temperature on its mechanical characteristics.Conventional triaxial compression tests were conducted under different confining pressures(0.5–7.0 MPa)and temperatures(-6℃,-8℃,-10℃,and-12℃).The test results show that when the confining pressure is less than 1 MPa,the frozen saline silty clay is dominated by brittle behavior with the X-shaped dilatancy failure mode.As the confining pressure increases,the sample gradually transitions from brittle to plastic behavior.The strength of frozen saline silty clay rises first and then decreases with increasing confining pressure.The improved Duncan-Chang hyperbolic model can describe the stress-strain relationship of frozen saline silty clay.And the parabolic strength criterion can be used to describe the strength evolution of frozen saline silty clay.The function relation of strength parameters with temperature is obtained by fitting,and the results of the parabolic strength criterion are in good agreement with the experimental results,especially when confining pressure is less than 5 MPa.Therefore,the study has important guiding significance for design and construction when considering high salinity soil as an engineering material in cold regions.

Characteristics of block strain and fault movement in the Sichuan-Yunnan region before and after Wenchuan earthquake

Deformation characteristics of the Sichuan-Yunnan region during the two periods 1999--2007 and 2007--2009 are analyzed with a block deformation model and GPS velocity profiles. The results show that the direction of the principal compressive strain rate of the Northwest-Sichuan block - the Mid-Yunnan block - the Southwest-Yunnan block was characterized by a clockwise rotation from north to south. The Anninghe and the Zemuhe faults had some shear-strain accumulation. The southern segment of the Xiaojiang fault had mainly strike-slip movement, while the northern segment was mainly accumulating strain. The 2008 Ms8.0 Wenchuan earthquake had some influence on the mid-southern segment of the Lijiang-Xiaojinhe fault, the Anninghe fault and the Jinshajiang fault, but not the Zemuhe fault, the Xiaojiang fault and the Red River fault as much.

Lubricant film flow and depletion characteristics at head/disk storage interface

The characteristics of lubricant film at head/disk interface （HDI） are essential to the stability of hard disk drives. In this study, the theoretical models of the lubricant flow and depletion are deduced based on Navier-Stokes （NS） and continuity equations. The air bearing pressure on the surface of the lubrication film is solved by the modified Reynolds equation based on Fukui and Kaneko （FK） model. Then the lubricant film deformations for a plane slider and double-track slider are obtained. The equation of lubricant film thickness is deduced with the consideration of van der Waals force, the air bearing pressure, the surface tension, and the external stresses. The lubricant depletion under heat source is simulated and the effects of different working conditions including initial thickness, flying height and the speed of the disk on lubricant depletion are discussed. The main factors that cause the lubricant flow and depletion are analyzed and the ways to reduce the film thickness deformation are proposed. The simulation results indicate that the shearing stress is the most important factor that causes the thickness deformation and other terms listed in the equation have little influence. The thickness deformation is dependent on the working parameter, and the thermal condition evaporation is the most important factor.

Study on the Effect of Occlusion Rate on the Deformation of Non-Vegetarian Occlusal Piles

In order to investigate the force characteristics of the occlusal pile, this paper takes the underground garage support project of Nanchang Bayi Square as the research background and studies the bending moment of the occlusal pile after the excavation process of the foundation pit through the model test. The test results show that the bending moment of the pile increases and then decreases with the increase of soil depth under horizontal load, and the bending moment reaches the maximum near the excavation surface of the foundation pit;the test results can provide a reference for the design of occluded pile body in practical engineering.

Simulation for the Controlling Factors of Structural Deformation in the Southern Margin of the Junggar Basin

According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.

Mixed-mode fracture behavior in deep shale reservoirs under different loading rates and temperatures

In the last years,shale gas has gradually substituted oil and coal as the main sources of energy in the world.Compared with shallow shale gas reservoirs,deep shale is characterized by low permeability,low porosity,strong heterogeneity,and strong anisotropy.In the process of multi-cluster fracturing of horizontal wells,the whole deformation process and destruction modes are significantly influenced by loading rates.In this investigation,the servo press was used to carry out semi-circular bend(SCB)mixedmode fracture experiments in deep shales(130,160,190℃)with prefabricated fractures under different loading rates(0.02,0.05,0.1,0.2 mm/min).The fracture propagation process was monitored using acoustic emission.The deformation characteristics,displacementeload curve,and acoustic emission parameters of shale under different loading rates were studied during the mixed-mode fracture propagation.Our results showed that during the deformation and fracture of the specimen,the acoustic emission energy and charge significantly increased near the stress peak,showing at this point the most intense acoustic emission activity.With the increase in loading rate,the fracture peak load of the deep shale specimen also increased.However,the maximum displacement decreased to different extents.With the increase in temperature,the effective fracture toughness of the deep shale gradually decreased.Also,the maximum displacement decreased.Under different loading rates,the deformation of the prefabricated cracks showed a nonlinear slow growthelinear growth trend.The slope of the linear growth stage increased with the increase in loading rate.In addition,as the loading rate increased,an increase in tension failure and a decrease in shear failure were observed.Moreover,the control chart showing the relationship between tension and the shear failure under different temperatures and loading rates was determined.

Field Test Study on Cantilever Circular Occluded Pile Supporting Structure

In order to explore the deformation of the pile body of the circular occluded pile retaining structure under earth pressure, this paper carries out on-site monitoring in combination with the actual project, and obtains the deformation characteristics and change rules of the occluded pile by measuring the strain and displacement of the pile body. The research conclusion can provide a certain reference value for the pile body design of bite pile in similar projects.