A New Parameter as an Indicator of the Degree of Deformation of Coals

The deformation of coal is effected by thermal effect, pressures and tectonic stress, and the tectonic stress is the principal influence factor. However, the proposition of a useful quantitative index that responds to the degree of deformation of coals quantitatively or semi-quantitatively has been a long-debated issue. The vitrinite reflectance ellipsoid, that is, the reflectance indication surface（RIS） ellipsoid is considered to be a strain ellipsoid that reflects the sum of the strain increment caused by stress in the process of coalification. It has been used to describe the degree of deformation of the coal, but the effect of the anisotropy on the RIS ellipsoid has not yet been considered with regards to non-structural factors. In this paper, Wei＇s parameter（ε） is proposed to express the deformation degree of the strain ellipsoid based on considering the combined influence of thermal effect, pressure and tectonic stress. The equation is as follows： ε=√[（ε_1-ε_0）~2＋（ε_2-ε_0）~2＋（ε_3-ε_0）~2]/3, where ε_1=lnR_（max）, ε_2=lnR_（int）, ε_3=lnR_（min）, and ε_0=（ε_1＋ε_2＋ε_3）/3. Wei＇s parameter represents the distance from the surface to the spindle of the RIS logarithm ellipsoid; thus, the degree of deformation of the strain ellipsoid is indicated quantitatively. The formula itself, meanwhile, represents the absolute value of the degree of relative deformation and is consequently suitable for any type of deformation of the strain ellipsoid. Wei＇s parameter makes it possible to compare degrees of deformation among different deformation types of the strain ellipsoid. This equation has been tested in four types of coal： highly metamorphic but weakly deformed coal of the southern Qinshui Basin, highly metamorphic and strongly deformed coal from the Tianhushan coal mining area of Fujian, and medium metamorphic and weakly or strongly deformed coal from the Huaibei Coalfield. The results of Wei＇s parameters are consistent with the actual deformation degrees of the coal reservoirs determined by other methods, which supports the effectiveness of this method. In addition, Wei＇s parameter is an important complement to the indicators of the degrees of deformation of coals, which possess certain theoretical significance and practical values.

Characterization of bubble behaviors in a dense phase pulsed gas-solid fluidized bed for dry coal processing

Pulsed gas-solid fluidized beds can effectively separate fine coal,and bubbles play an important role in creating suitable separation conditions.The present study performed statistical and image analyses of the evolution of bubbles in a two-dimensional pulsed gas-solid fluidized bed using a high-speed dynamic camera.The effects of apparent gas velocity,pulsation frequency and particle size on bubble characteristics and bed expansi on were analyzed.The results indicate that,when a fluctuation freque ncy is added,the expa nsion height of the bed in creases,the effect of attachme nt to the bed wall decreases,the leading diameter and rising velocity of the bubbles both decrease and the degree of bubble deformation increases.These trends are also more obvious for fine particles.These findings dem on strate that a high density pulsed gas-solid fluidized bed can effectively combine gases and solids to produce a uniform,stable mixture.The bubble diameter and rising velocity were also simulated in the present work,and the relationship between the two was established using a fitting model with an error within 5%.This model provides an effective means of predicting bubble velocity as well as studying the distribution of the bubble phase and improving the stability of the bed density.

Effect of Thermomechanical Processing on Mechanical Properties of Hot Rolled Multiphase Steel

The effect of thermomechanical processing（TMP）on the mechanical properties of hot rolled multiphase steel was investigated.TMP was conducted using a laboratory hot rolling mill,in which three different kinds of finish rolling deformation degrees and temperatures were applied.The results indicate that polygonal ferrite,granular bainite,and a considerable amount of stabilized retained austenite can be obtained by TMP.The stability of the retained austenite increases with decreasing finish rolling temperature and increasing finish rolling deformation degrees.Ultimate tensile strength（σb）,total elongation（δ）,and the product of ultimate tensile strength by total elongation（σb·δ）for 50% reduction at finish rolling temperature of 700 ℃ reach maximum values [791 MPa,36% and 28 476（MPa·%）,respectively].