A Characteristic Analysis of the Dynamic Evolution of Preseismic-Coseismic-Postseismic Interferometric Deformation Fields Associated with the M 7.9 Earthquake of Mani,Tibet in 1997

By using the D-InSAR technique, we have acquired the temporal-spatial evolution images of preseismic.cosesimci-postseismic interferometric deformation fields associated with the M 7.9 earthquake of Mani, Tibet on 8 November 1997. The analysis of these images reveals the relationships between the temporal-spatial evolution features of the interferometric deformation fields and locking, rupturing, and elastic restoring of the source rupture plane, which represent the processes of strain accumulation, strain release, and postseismic restoration. The result shows that 10 months prior to the Mani event, a left-lateral shear trend appeared in the seismic area, which was in accordance with the earthquake fault in nature. The quantity of local deformation on the north wall was slightly larger than that on the south wall, and the deformation distribution area of the north wall was relatively large. With the event impending, the deformation of the south wall varied increasingly, and the deformation center shifted eastward. Two and half monthd before the event, the west side of the fault was still locked while the east side began to slide, implying that the whole fault would rupture at any moment. These features can be regarded as short-term precursors to this earthquake. Within the period from 16 April 1996 to two and half months before the earthquake, the most remarkable deformation zones appeared in the north and south walls, which were parallel to and about 40 km apart from the fault, with accumulated local displacements of 344 mm and 251 mm on the north and south walls, respectively. The south wall was the active one with larger displacements. Five months after the earthquake, the distribution feature of interferometric fringes was just opposite to that prior to the event, expressing evident right-lateral shear. The recovered displacements are -179 mm on the north wall and -79 mm on the south wall, close to the east side of the fault. However, in the area of the south wall far from the fault there still existed a trend of sinistral motion. The deformation of the north wall was small but recovered fast in a larger area, while the active south wall began to recover from the east section of the fault toward the WSW.

Present-day 3D deformation field of Northeast China,observed by GPS and leveling

A broad view of present-day 3D deformation field around the Northeast China region was derived from GPS and leveling observations. We draw the following conclusions： First, the Northeast China region moved towards northwest with an average velocity of 5 ram/a, with respect to South China. The entire Northeast China region was in a low strain state from the strain rate field. Second, we processed two periods of first- order leveling data in 1970s and 1990s, showing the vertical deformation of the Northeast China region is ＂uplift in western part and subsidence in eastern part＇

Evolution of the deformation field and earthquake fracture precursors of strike-slip faults

Seismic hazard analysis is gaining increased attention in the present era because of the catastrophic effects of earthquakes.Scientists always have as a goal to develop new techniques that will help forecast earthquakes before their reoccurrence. In this research,we have performed a shear failure experiment on rock samples with prefabricated cracks to simulate the process of plate movement that forms strike-slip faults. We studied the evolution law of the deformation field to simulate the shear failure experiment, and these results gave us a comprehensive understanding of the elaborate strain distribution law and its formation process with which to identify actual fault zones. We performed uniaxial compression tests on marble slabs with prefabricated double shear cracks to study the distribution and evolution of the deformation field during shear failure. Analysis of the strain field at different loading stages showed that with an increase in the load, the shear strain field initially changed to a disordered-style distribution. Further, the strain field was partially concentrated and finally completely concentrated near the crack and then distributed in the shape of a strip along the crack. We also computed coefficients of variation(CVs) for the physical quantities u, v, and exy, which varied with the load. The CV curves were found to correspond to the different loading stages. We found that at the uniform deformation stage, the CV value was small and changed slowly,whereas at the later nonuniform deformation stage, the CV value increased sharply and changed abruptly. Therefore, the precursor to a rock sample breakdown can be predicted by observing the variation characteristics of CV statistics. The correlation we found between our experimental and theoretical results revealed that our crack evolution and sample deformation results showed good coupling with seismic distribution characteristics near the San Andreas Fault.

Research on synchronous measurement technique of temperature and deformation fields using multispectral camera with bilateral telecentric lens

The hot-section parts easily occur the creep-fatigued interaction under the condition of mechanicalthermal coupled load during the period of service, which may lead to the damage of the parts, and therefore, the measurement and characterization of thermal-deformed fields of the parts are important to understand its damage process. Aiming at relevant demand, the bilateral telecentric-multispectral imaging system was established, the research of synchronous measurement technique of the temperature and deformation fields was developed. On the one hand, the measurement technology for surface temperature of the object was developed using the two-color images captured by the multispectral camera with bilateral telecentric lens and combined with colorimetric method. On the other hand, the 2 D-DIC measurement technique of the multispectral camera was developed by conducting digital image correlation analysis using the blue light images before and after deformation, which can measure the high temperature deformation field of the object(the blue light images were filtered by multispectral camera).Results showed that the bilateral telecentric lens is used to replace the ordinary optical lens for imaging,which can effectively eliminate the distortion of the multispectral imaging system. Since the temperature measurement process of this measurement system is little affected by the emissivity of the object, therefore, it has excellent robustness. The thermal expansion coefficients of the nickel alloys are evaluated at the temperature ranges of 700–1000℃, indicating this system can achieve the synchronous and precise measurement of the temperature and deformation fields of the object.

Coseismic deformation and fault slip distribution of the 2023 M_(W)7.8 and M_(W)7.6 earthquakes in Türkiye

On February 6,2023,a devastating earthquake with a moment magnitude of M_(W)7.8 struck the town of Pazarcik in south-central Türkiye,followed by another powerful earthquake with a moment magnitude of M_(W)7.6 that struck the nearby city of Elbistan 9 h later.To study the characteristics of surface deformation caused by this event and the influence of fault rupture,this study calculated the static coseismic deformation of 56 stations and dynamic displacement waveforms of 15 stations using data from the Turkish national fixed global navigation satellite system(GNSS)network.A maximum static coseismic displacement of 0.38 m for the M_(W)7.8 Kahramanmaras earthquake was observed at station ANTE,36 km from the epicenter,and a maximum dynamic coseismic displacement of 4.4 m for the M_(W)7.6 Elbistan earthquake was observed at station EKZ1,5 km from the epicenter.The rupture-slip distributions of the two earthquakes were inverted using GNSS coseismic deformation as a constraint.The results showed that the Kahramanmaras earthquake rupture segment was distinct and exposed on the ground,resulting in significant rupture slip along the Amanos and Pazarcik fault segments of the East Anatolian Fault.The maximum slip in the Pazarcik fault segment was 10.7 m,and rupture occurred at depths of 0–15 km.In the Cardak fault region,the Elbistan earthquake caused significant ruptures at depths of 0–12 km,with the largest amount of slip reaching 11.6 m.The Coulomb stress change caused by the Kahramanmaras earthquake rupture along the Cardak fault segment was approximately 2 bars,and the area of increased Coulomb stress corresponded to the subsequent rupture region of the M_(W)7.6 earthquake.Thus,it is likely that the M_(W)7.8 earthquake triggered or promoted the M_(W)7.6 earthquake.Based on the cumulative stress impact of the M_(W)7.8 and M_(W)7.6 events,the southwestern segment of the East Anatolian Fault,specifically the Amanos fault segment,experienced a Coulomb rupture stress change exceeding 2 bars,warranting further attention to assess its future seismic hazard risk.

Displacement field reconstruction in landslide physical modeling by using a terrain laser scanner e Part 2:Application and large strain/displacement and water effect analysis

Deformation analysis is fundamental in geotechnical modeling.Nevertheless,there is still a lack of an effective method to obtain the deformation field under various experimental conditions.In this study,we introduce a processebased physical modeling of a pileereinforced reservoir landslide and present an improved deformation analysis involving large strains and water effects.We collect multieperiod point clouds using a terrain laser scanner and reconstruct its deformation field through a point cloud processing workflow.The results show that this method can accurately describe the landslide surface deformation at any time and area by both scalar and vector fields.The deformation fields in different profiles of the physical model and different stages of the evolutionary process provide adequate and detailed landslide information.We analyze the large strain upstream of the pile caused by the pile installation and the consequent violent deformation during the evolutionary process.Furthermore,our method effectively overcomes the challenges of identifying targets commonly encountered in geotechnical modeling where water effects are considered and targets are polluted,which facilitates the deformation analysis at the wading area in a reservoir landslide.Eventually,combining subsurface deformation as well as numerical modeling,we comprehensively analyze the kinematics and failure mechanisms of this complicated object involving landslides and pile foundations as well as water effects.This method is of great significance for any geotechnical modeling concerning large-strain analysis and water effects.

Displacement field reconstruction in landslide physical modeling by using a terrain laser scanner e Part 1:Methodology,error analysis and validation

Laser scanning technology has been widely used in landslide aspects.However,the existing deformation analysis based on terrain laser scanners can only provide limited information,which is insufficient for understanding landslide kinematics and failure mechanisms.To overcome this limitation,this paper proposes an automated method for processing point clouds collected in landslide physical modeling.This method allows the acquisition of quantitative three-dimensional(3D)deformation field information.The results show the organized and spatially related point cloud segmentation in terms of spherical targets.The segmented point clouds can be fitted to determine the locations of all preset targets and their corresponding location changes.The proposed method has been validated based on theoretical analysis and numerical and physical tests,which indicates that it can batch-process massive data sets with high computational efficiency and good noise resistance.Compared to existing methods,this method shows a significant potential for understanding landslide kinematics and failure mechanisms and advancing the application of 3D laser scanning in geotechnical modeling.

High-resolution remote sensing image-based extensive deformation-induced landslide displacement field monitoring method

Landslide is one of the multitudinous serious geological hazards. The key to its control and reduction lies on dynamic monitoring and early warning. The article points out the insufficiency of traditional measuring means applied for large-scale landslide monitoring and proposes the method for extensive landslide displacement field monitoring using high- resolution remote images. Matching of cognominal points is realized by using the invariant features of SIFT algorithm in image translation, rotation, zooming, and affine transformation, and through recognition and comparison of characteristics of high-resolution images in different landsliding periods. Following that, landslide displacement vector field can be made known by measuring the distances and directions between cognominal points. As evidenced by field application of the method for landslide monitoring at West Open Mine in Fushun city of China, the method has the attraction of being able to make areal measurement through satellite observation and capable of obtaining at the same time the information of large- area intensive displacement field, for facilitating automatic delimitation of extent of landslide displacement vector field and sliding mass. This can serve as a basis for making analysis of laws governing occurrence of landslide and adoption of countermeasures.

On the physical model of earthquake precursor fields and the mechanism of precursors＇timespace distribution（Ⅲ）──anomalies of seismicity and crustal deformation and their mechanisms when a strong earthquake is in prep

By studying the seismicity pattern before 37 earthquakes with M≥6. 0 in North China and the pattern of crustal deformation in the Capital Area from 1954 to 1992, some abnormal characteristics of these patterns before strong earthquakes have been extracted. A comparison has been made between the anomalies of these two kinds of Patterns. From the results we can know the following. ① Before a strong earthquake, the seismicity will strengthen and the crustal deformation rate will increase. ② Several years before a strong earthquake, there will be seismic gaps and deformation gaps around the epicenter of the quake. ③ The dynamic parameters of patterns all show a decrease in information dimension. This means that the crustal deformation has become more and more localized with time and it gives an important indication showing that a strong earthquake is in preparation. At the end of the paper, the physical mechanisms of the abnormal patterns of seismicity and crustal deformationhave been explained in a unified way in terms of the earthquake-generating model of a inhomogeneous strongbody in inhmogeneous media.

Study on the Horizontal Deformation Strain Field in the Central and Northern Parts of Yunnan Province

Based on the horizontal deformation field and the strain field derived from the GPS data over the period of 1999～2001 in the Yunnan area, the characteristics of deformation and strain in the northern part of Yunnan Province have been studied. The results indicate that the central part of the studied area is rather stable with little crustal displacement, while the western and eastern parts are active with larger displacement. The strain field reveals that the orientations of the principal compressive strain axis of the crust and the sub blocks in the area are NW SE, while the orientations of the principal tensile strain axis is NE SW. In the studied area, the tensile strain is predominatly in the northern part and the compressive strain is predominatly in the central and southern parts. The stretching direction of the shear strain contour is basically consistent with the strike of the active fault. The strain and stress fields of the fault activity are related to the structure where the fault is located, while the activity properties of the faults are different.

Experimental study on strain field evolution around a simulated thrust fault

Earthquakes result from continuous geodynamic processes.A topic of significant interest for the scientific community is to elaborate on the phenomena governing the faulting and fracturing of crustal rocks.Therefore,in this study,uniaxial compressive shear failure experiments were conducted on Fangshan marble rock samples with a prefabricated slot to simulate thrust faulting.The center of each marble plate(105 mm × 80 mm × 5 mm) was engraved with a 30-mm long double-sided nonpenetrating slot(depth:2 mm,width:0.5 mm).The deformation and destruction processes of the rock surface were recorded using a high-speed camera.The digital image correlation method was used to calculate the displacement and strain distribution and variation at different loading stages.The accumulative and incremental displacement fields u and v,strain field exand e_(y),and shear strain e_(xy) were analyzed.When the loading level reached its ultimate value,the strain field was concentrated around the prefabricated slot.The concentration reached a maximum at the ends of the prefabricated slot.The magnitude of shear strain reached 0.1.This experiment contributes to our understanding of the dynamic process of active faulting.

Experimental analysis of crack tip fields in rubber materials under large deformation

A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation. The model is inspired by the distribution of the measured in-plane and out-of-plane deformation. The in- plane displacement of crack-tip fields under both Mode 1 and mixed-mode （Mode I-II） fracture conditions is measured by using the digital Moir6 method. The deformation character- istics and experimental sector division mode are investigated by comparing the measured displacement fields under differ- ent fracture modes. The out-of-plane displacement field near the crack tip is measured using the three-dimensional digital speckle correlation method.

Structural deformation of nitro group of nitromethane molecule in liquid phase in an intense femtosecond laser field

The structural deformation of NO2 group induced by an intense femtosecond laser field of liquid nitromethane（NM）molecule is detected by time-and frequency-resolved coherent anti-Stokes Raman spectroscopy（CARS） technique with the intense pump laser. Here, we present the mechanism of molecular alignment and deformation. The CARS spectra and its FFT spectra of liquid NM show that the NO2 torsional mode couples with the CN symmetric stretching mode and that the NO2 group undergoes ultrafast structural deformation with a relaxation time of 195 fs. The frequency of the NO2 torsional mode in liquid NM（50.8±0.3 cm^-1） at room temperature is found. Our results prove the structural deformation of two groups in liquid NM molecule occur simultaneously in the intense laser field.

The Surface Rupture Zone and Coseismic Deformation Produced by the Yutian Ms7.3 Earthquake of 21 March 2008,Xinjiang

On 21 March 2008, a Ms7.3 earthquake occurred at Quickbird, Yutian County, Xinjiang. We attempt to reveal the features of the causative fault of this shock and its coseismic deformation field. Our work is based on analysis and interpretation to high-resolution satellite images as well as differential interferometric synthetic aperture radar （D-InSAR） data from the satellite Envisat SAR, coupled with seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 40 km-long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in Qira County. It is characterized by distinct linear traces and simple structure with 1-3-m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone many secondary fractures and fault-bounded blocks are seen, exhibiting remarkable extension. The eoseismic deformation affected a large area 100~100 km2. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. Because of the big deformation gradients near the seismogenic fault, no interference fringes are seen on images, and what can be determined is a vertical displacement 70 cm or more between the two fault walls. According to the epicenter and differential occurrence times from the National Earthquake Information Center, China Earthquake Network Center, Harvard and USGS, it is suggested that the seismic fault ruptured from north to south.

Deformation tests and failure process analysis of an anchorage structure

In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.

A new nano-scale surface marking technique for the deformation analysis of Mg-based alloys

In this work a new nanoscale surface marking technique,namely electron beam damage induced surface marking(EBDISM),is developed and tested for the first time on a fine-grained pure Mg surface.This technique utilizes focused high-energy electron beam of a scanning electron microscope to“burn”dense arrays of nano-scale grid patterns on the sample surface,and it is proved to be very effective for identifying and measuring localised deformation behaviours.However,the surface marking deposited by EBDISM is not permanent and it tends to deteriorate overtime.Cheap,easy to use and versatile,the EBDISM technique has a huge potential for quantitative measurement of strain field and nano-scale deformation analysis.

Crustal deformation on the Chinese mainland during 1998—2004 based on GPS data

This study focuses on resolving moderate amounts of crustal motion at the continental scale based on a large volume of global positioning system（GPS） data during 1998e2014. A state-of-the-art GPS processing strategy was used to resolve position time series and velocities from carrier beat phases for all available data. Position time series were closely analyzed to estimate linear constant, coseismic displacements, postseismic motions, and other parameters. We present coseismic offsets inferred from the GPS data for the 2010 Yushu and 2014 Yutian earthquakes, and also illustrate transient postseismic motions following the 2001 Kokoxili, 2008 Wenchuan, and 2011 Tohoku-Oki earthquakes. Since not all GPS position time series dominated by postseismic motions can be modeled and corrected reasonably, we present contemporary horizontal velocities from 2009 to 2014 for campaign stations and from 1998 to 2014 for continuous stations, irrespective of postseismic deformations. Our study concludes that we need to accumulate observations over a greater duration and apply accurate postseismic modeling to correct for transient displacement in order to resolve reasonable interseismic velocity.

Coalescence behaviour of water droplets in water‐oil interface under pulsatile electric fields

In this research, the deformation of water droplets in sunflower oil-interface under pulsatile electric field was studied experimentally. Three types of coalescence were observed:(i) complete coalescence,(ii) incomplete coalescence and(iii) no-coalescence. The first type is desirable because of leaving no secondary droplets. The second type that produced secondary droplets which caused by necking process, due to extreme elongation of droplets(mostly small droplets), was undesirable; because the small droplets were more difficult to coalesce and remove. The no-coalescence was caused by very fast coalescence and extensive pushing of droplet into the continuous phase. In this work the process was operated with the utilization of a batch cylindrical separator with high voltage system. The lower part of the cylinder was filled with the aqueous phase and its top part was filled with sunflower oil to form an interface between the two phases. The effects of electric field strength,frequency, and waveform types were investigated. It was found that, the ramp-ac waveform was the best waveform, avoiding the production of secondary droplets and in this case the frequency also played an important role.

Effect of Plastic Deformation and H_2S on Dynamic Fracture Toughness of High Strength Casing Steel

The effects of plastic deformation and H2 S on fracture toughness of high strength casing steel（C110 steel） were investigated. The studied casing specimens are as follows： original casing, plastic deformation（PD） casing and PD casing after being immersed in NACE A solution saturated with H2S（PD＋H2S）. Instrumented impact method was employed to evaluate the impact behaviors of the specimens, meanwhile, dynamic fracture toughness（JId） was calculated by using Rice model and Schindler model. The experimental results show that dynamic fracture toughness of the casing decreases after plastic deformation. Compared with that of the original casing and PD casing, the dynamic fracture toughness decreases further when the PD casing immersed in H2 S, moreover, there are ridge-shaped feature and many secondary cracks present on the fracture surface of the specimens. Impact fracture mechanism of the casing is proposed as follows： the plastic deformation results in the increase of defect density of materials where the atomic hydrogen can accumulate in reversible or irreversible traps and even recombine to form molecular hydrogen, subsequently, the casing material toughness decreases greatly.

A novel subset assignment and matching method for DIC measurement of complex deformation in aircraft braking process

This paper proposes a measurement method related to the braking deformation of a complex motion.During the braking process,the deformation of the wheel includes large amounts of movement,vibration,warping,and distortion.A novel subset assignment and correlation method is proposed to measure the complex deformation.The proposed method can greatly improve the accuracy and stability of the calculation of complex deformations by simplifying the complex deformation into translational deformations in logarithmic coordinate system.According to the simulation and actual experiments,the proposed method can be utilized to measure the deformations of up to 100%tensile strain under complex deformation.According to the accuracy verification experiment,the error of the proposed method is less than 50 le.The results show that the proposed method can effectively carry out structural deformation measurement in the complex motion and deformation process.The proposed method has great significance for structural performance analysis and optimization design considering complex motion and deformation.