Deformation tests and failure process analysis of an anchorage structure

In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.

Numerical Simulations of the Richtmyer-Meshkov Instability of Solid-Vacuum Interface

The Richtmyer-Meshkov instability of interfaces separating elastic-plastic materials from vacuum is investigated by numerical simulation using a multi-material solid mechanics algorithm based on an Eulerian framework.The research efforts are directed to reveal the influence of the initial perturbation and material strength on the deformation of the perturbed interface impacted by an initial shock.By varying the initial amplitude(kx0)of the perturbed interface and the yield stress(sY),three typical modes of interface deformation have been identified as the broken mode,the stable mode and the oscillating mode.For the broken mode,the interface width(i.e.,the bubble position with respect to that of the spike)increases continuously resulting in a final separation of the spike from the perturbed interface.For the stable mode,the interface width grows to saturation and then maintains a nearly constant value in the long term.For the oscillating mode,the wavy-like interface moving forward obtains an aperiodic oscillation of small amplitude,namely,the interface width varies in time slightly around zero.The intriguing difference of the typical modes is interpreted qualitatively by comparing the early-stage wave motion and the commensurate pressure and effective stress.Further,the subsequent interface deformation is illustrated quantitatively via the time series of the interface positions and velocities of these three typical modes.

Modeling of Three-Phase Flow and Interface Deformation of Metal/Bath in Aluminum Reduction Cell With Cathode Protrusion

Stabilizing the interface wave of the molten aluminum(metal)-electrolyte(bath)is beneficial to shorten the anode-cathode distance(ACD)which is critical to the energy saving.A coupled mathematical model was developed to study the impact of the novel cathode protrusion on the molten fluid motion as well as the metal-bath interface deformation.The molten fluid motion in the aluminum reduction ceils is under the combined effect of the electro-magnetic forces(EMFs)and the gas bubbles generated at the anode.A transient inhomogeneous three-phase model(metal-bath-gas bubble)was established in order to calculate more accurate.The results indicate that the metal-bath interface deformation can be reduced significantly by the novel cathode protrusion which is beneficial to the electric energy saving.Besides,The EMFs decreases as a result of the optimizing of the magnetic field due to the novel cathode convex which is an important driving force for the deformation of the interface.In addition,large vortex in the metal flow field is break up into the small vortex by the cathode protrusion and then dissipated due to the viscous force and the hindering effect of the cathode protrusion.The quantity of the vortex as well as the strength of the vortex reduces significantly in the reduction cell with novel cathode protrusion.

Analytical Solution of Thermocapillary Flow in Cylindrical Annuli with Curved Free Surface

In this paper we consider thermocapillary flow with interface deformation in cylindrical annuli subjected to lateral temperature gradient.Based on the assumption that Reynolds,Marangoni and capillary numbers are very small,we expanded the governing equations in terms of a small parameter,and the zeroth-order one is the Stokes problem,which can be analytically solved by use of separation of variables formulation.Solutions are obtained for the zeroth-order fluid and thermal fields as well as the first-order interfacial shapes.Streamlines,temperature distributions and interface shapes are presented and the influence of aspect ratios is investigated.