Effects of dynamic flow rates on degradation deposition behavior of Mg scaffold

Degradability of bone tissue engineering scaffold that matching the regeneration rate could allow a complete replacement of host tissue.However,the porous structure of biodegradable Mg scaffolds certainly generated high specific surface area,and the three-dimensional interconnected pores provided fast pervasive invasion entrance for the corrosive medium,rising concern of the structural integrity during the degradation.To clarify the structural evolution of the three-dimensional(3D)porous structure,semi-static immersion tests were carried out to evaluate the degradation performance in our previous study.Nevertheless,dynamic immersion tests mimicking the in vivo circulatory fluid through the interconnected porous structure have yet been investigated.Moreover,the effects of dynamic flow rates on the degradation deposition behavior of 3D porous Mg scaffolds were rarely reported.In this study,Mg scaffolds degraded at three flow rates exhibited different degradation rates and deposition process.A flow rate of 0.5 m L/min introduced maximum drop of porosity by accumulated deposition products.The deposition products provided limited protection against the degradation process at a flow rate of 1.0 m L/min.The three-dimensional interconnected porous structure of Mg scaffold degraded at 2.0 m L/min well retained after 14 days showing the best interconnectivity resistance to the degradation deposition process.The dynamic immersion tests disclosed the reason for the different degradation rates on account of flow rates,which may bring insight into understanding of varied in vivo degradation rates related to implantation sites.

The misalignment between degradation rate and mechanical integrity of Mg-Zn-Y-Nd alloy during the degradation evaluation in modified Hanks’solutions

The degradation behavior of biodegradable Mg alloys has become a research hotspot in the fields about biodegradable metallic materials.While the most of the related publications mainly focused on the degradation rate of Mg-based materials,but rare to care about the changes of their mechanical properties during the immersion period,which can significantly affect their service performance.The link between residual strength and Mg degradation is not appreciated enough.In this work,a series media were constructed based on Hanks’solution,the effects of inorganic ions on the degradation rate and mechanical integrity of Mg-Zn-Y-Nd alloy were investigated.The results indicated that the degradation behavior of Mg alloy was mainly controlled by degradation products and there is no direct correspondence between the degradation rate change and mechanical integrity of Mg alloy.The relevant findings are beneficial for selecting the monitoring index in Mg corrosion tests and evaluating the service reliability of Mg alloys for biomedical applications.

Achieving high strength and rapid degradation in Mg-Gd-Ni alloys by regulating LPSO phase morphology combined with extrusion

In this study,Mg-13.2Gd-4.3Ni alloys containing continuous bulk-shaped long-period stacking ordered(LPSO),lamellar LPSO,and a small amount of eutectic phase were prepared,and the evolution of microstructure at different extrusion temperatures and its influence on mechanical and degradation properties as well as corrosion mechanism were investigated.Preheating before extrusion can effectively promote the precipitation of lamellar LPSO in matrix.EX400 with higher volume fraction of non-DRXed grains exhibited higher strength,which was mainly due to strong texture,high dislocation density,and high volume fraction of lamellar LPSO.The EX420 with higher volume fraction of DRXed grains showed higher degradation rate,which was mainly due to the higher density of grain boundary.The EX400 exhibited excellent comprehensive properties with tensile yield strength(TYS)of 334 MPa,ultimate tensile strength(UTS)of 484 MPa and elongation(EL)of 7.4%,ultimate compressive strength(UCS)of 638 MPa and compressive yield strength(CYS)of 443 MPa,degradation rate of 86.1 mg/cm^(2)/h at 93℃in 3 wt.%KCl solution.

Degradation Rate Assessment of Biodegradable Magnesium Alloys

Biodegradable magnesium alloys have been widely used in medical implants. But safety concerns were put forward for the high degradation rate of biodegradable magnesium alloy. The optimal biodegradable magnesium alloys that give rise to the desired degradation rate hasn’t yet to be defined. Assessing the degradation rate of biodegradable magnesium alloys involves in vitro testing, in vivo testing, numerical modeling, understanding the factors influencing their degradation in physiological environments, biocompatibility testing, and clinical studies. It is important to standardize analytical tools aimed at assessing the degradation rate of biodegradable magnesium alloys. It is advisable to identify the threshold for safe degradation rate of biodegradable magnesium alloys in biomedical applications.

The Effects of Degradation Phenomena of the Steel-Concrete Interface in Reinforced Concrete Structures

Reinforced concrete (RC) constructions are the innovation of sustainable constructions replacing masonry constructions. Despite this, the use of concrete and steel to improve the performance of structural members in service is a recurring problem due to the immediate or overtime appearance of cracks. The objective of this work was therefore to assess the damage phenomena of the steel-concrete interface in order to assess the performance of an RC structure. Samples of approximately 30 cm of reinforcement attacked by rust were taken from broken reinforced concrete columns and beams in order to determine the impact of corrosion on high adhesion steel (HA) and therefore on its ability to resist. The experimental results have shown that the corrosion degradation rates of reinforcing bars of different diameters increase as the diameter of the reinforcing bars decreases: 5% for HA12;23.75% for HA8 and 50% for HA6. Using the approach proposed by Mangat and Elgalf on the bearing capacity as a function of the progress of the corrosion phenomenon, these rates made it possible to assess the new fracture limits of corroded HA steels. For HA6 respectively HA8 and HA12, their initial limit resistances will decrease by 4/4, 3/4 and 1/4. Based on the results of this study and in order to guarantee their durability, an RC structure can be dimensioned by taking into account the effects of reinforcement corrosion.

Construction and photocatalytic properties toward rhodamine B of CdS/Fe_(3)O_(4) heterojunction

A simple two-step hydrothermal method synthesized four different CdS/Fe_(3)O_(4)photocatalysts with varying ratios of mass of CdS to Fe_(3)O_(4).The composition and morphology of the prepared samples were investigated using X-ray diffraction(XRD),Raman spectrum,X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).Solid UV reflectance spectra testing found that CdS/Fe_(3)O_(4)nanocomposites had good light absorption throughout the spectral range,promoting their photocatalytic properties.Under visible light irradiation,CdS/Fe_(3)O_(4)(2∶5)with a mass ratio of 2∶5 exhibited excellent photocatalytic perfor-mance,with a degradation rate of 98.8%for rhodamine B.Furthermore,after five cycles of photocatalytic degrada-tion reaction,the rhodamine B degradation rate remained at 96.2%,indicating that the photocatalysts have good pho-tocatalytic stability.

The Degradation of FB1 in Aqueous Acetonitrile and Corn Following γ-ray Irradiation

To investigate the degradation of FB1 in aqueous acetonitrile and corn af-ter γ-ray irradiation, the radiolytic products of FB1 was detected preliminarily. The results showed that γ-ray irradiation could degrade FB1 in aqueous acetonitrile;When the radiation dose was below 9 kGy, the degradation of FB1 in corn was not significant. The degradation rates of FB1 with concentrations of 0.8 mg/ml, 10.0 μg/ml, 1.0 μg/ml and 50 ng/ml after irradiation at 9 kGy were 22.5%, 51.0%, 59.0% and 64.8% respectively; when irradiation dose was increased to 100 kGy, the degrada-tion rate of FB1 with concentration of 0.8 mg/ml was up to 90%, and it was nearly 100% when irradiation dose was increased to 200 kGy. No representative products of FB1 were detected by LC/MS/MS analysis.

Enhanced mechanical properties and degradation rate of Mg-Ni-Y alloy by introducing LPSO phase for degradable fracturing ball applications

In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order(LPSO)phase was firstly introduced to improve both the mechanical properties and degradation rate of magnesium alloys.With the increase of LPSO phase,the compressive strength was improved significantly,while the elongation of the alloys decreased owing to the relatively brittle nature of LPSO phase.Due to the higher corrosion potential of LPSO phase,the LPSO phase can accelerate the corrosion process by providing more micro-couples.However,the LPSO phase would serve as the corrosion barrier between the corrosion medium and the matrix when the contents of LPSO phase are too high in Mg92.5Ni3Y4.5 and Mg87.5Ni5Y7.5 alloys.As-cast Mg97.5Ni1Y1.5 alloy with satisfactory mechanical properties and rapid degradation rate was successfully developed,exhibiting a high degradation rate of 6675 mm/a(93℃)in 3 wt.%KCl solution and a favorable ultimate compressive strength of 410 MPa.The degradation rate of Mg97.5Ni1Y1.5 alloy is 2-5 times of the current commercial magnesium alloy fracturing materials.

Feasibility and advantage of biofilm-electrode reactor for phenol degradation

The new biofilm-electrode method was used for the phenol degradation, because of its low current requirement. The biofilm-electrode reactor consisted of immobilized degrading bacteria on Ti electrode as cathode and Ti/PbO2 electrode as anode. With the biofilmelectrode reactor in a divided electrolytic cell, the phenol degradation rate could achieve 100% at 18 h which was higher than using traditional methods, such as biological or electrochemical methods. Chemical oxygen demand （COD） removal rate of the biofilmelectrode reactor was also greater than that using biological and electrochemical method, and could reach 80% at 16 h. The results suggested that the biofilm-electrode reactor system can be used to treat wastewater with phenol.

Effects of Substrate Permeation on Kinetics of Phenol Biodegradation

Based on the theory of substrate permeation through the cytoplasmic membrane,and considering the effect of initial concentration of substrate,a new kinetic model of phenol degradation process was proposed,Comparing with the widely used Haldane model,which is greatly dependent on the initial phenol concentration,our model can be used to simulate the phenol degradation process in a wide range of initial phenol concentration by using only one set of model parameters ,Therefore,this new kinetic model has much more potential applications to industrial design and operation.

Assessing the microstructure and in vitro degradation behavior of Mg-xGd screw implants using μCT

Biodegradable implants are taking an increasingly important role in the area of orthopedic implants with the aim to replace permanent implants for temporary bone healing applications.During the implant preparation process,the material’s surface and microstructure are being changed by stresses induced by machining.Hence degradable metal implants need to be fully characterized in terms of the influence of machining on the resulting microstructure and corrosion performance.In this study,micro-computed tomography(μCT)is used for the quantification of the degradation rate of biodegradable implants.To our best knowledge,for the first time quantitative measures are introduced to describe the degradation homogeneity in 3D.This information enables a prediction in terms of implant stability during the degradation in the body.Two magnesium gadolinium alloys,Mg-5Gd and Mg-10 Gd(all alloy compositions are given in weight%unless otherwise stated),in the shape of M2 headless screws have been investigated for their microstructure and their degradation performance up to 56 days.During the microstructure investigations particular attention was paid to the localized deformation of the alloys,due to the machining process.In vitro immersion testing was performed to assess the degradation performance quantified by subsequent weight loss and volume loss(usingμCT)measurements.Although differences were observed in the degree of screw’s near surface microstructure being influenced from machining,the degradation rates of both materials appeared to be suitable for application in orthopedic implants.From the degradation homogeneity point of view no obvious contrast was detected between both alloys.However,the higher degradation depth ratios between the crests and roots of Mg-5Gd ratios may indicated a less homogeneous degradation of the screws of these alloys on contract to the ones made of Mg-10Gd alloys.Due to its lower degradation rates,its more homogeneous microstructure,its weaker texture and better degradation performance extruded Mg-10Gd emerged more suitable as implant material than Mg-5Gd.

Study on Isolation, Identification of A Petroleum Hydrocarbon Degrading Bacterium Bacillus fusiformis sp. and Influence of Environmental Factors on Degradation Efficiency

A hydrocarbon degrading bacterium KL2-13 was isolated from ten sites of oil contaminated soil in the Karamay oilfield. It was identified as the Bacillusfusiformis sp. bacterium based on its morphological and physiological characteristics and the 16S rDNA sequence analysis. The factors influencing the hydrocarbon degradation by the bacterium KL2-13 were determined. The test results have showed that the hydrocarbon degrading bacterium KL2-13 requires an optimum pH range of 6-8, and the optimum inoculation quantity is 3%. The low-concentration metal ions Fe^2＋, Mg^2＋ and Ca^2＋can improve the degradation ability of the bacteria KL2-13. A too low concentration of Tween-80 does not show obvious promotion to the degrading bacterium KL2-13, and an excessively high concentration can decrease the degradation ability of the bacterium, the best dosage of which is 2%. The hydrocarbon degrading rate reached 59.07%4-0.37% under the optimum culture conditions.

Rumen Degradation Regularity of Dry Matter and Crude Protein of Common Roughage in Beef Cattle

Three individuals of Horqin yellow cattle equipped with permanent fistula, weighed （548 ±21） kg, were sdected as the experimental animals. The ru- men degradation characteristics of dry matter （DM） and crude protein （CP） of roughage at 6, 12, 24, 48 and 72 h were measured by nylon bag method. The re- suits showed that the effective degradation rates of DM and CP of alfalfa hay were the highest, while higher contents of rapid degradation part and potential degrada- tion part of DM and CP also resulted in higher degradation rates of DM and CP. The effective degradation rates of CP and DM of roughage presented strong positive correlation with CP, but showed strong negative correlation with neutral detergent fiber （NDF）. The effective degradation rates of CP of five roughages successively were alfalfa hay 〉 alfalfa block 〉 ryegrass 〉 silage corn 〉 straw.

The Degradation Rate of Polyanhydride (Poly(sebacic acid), diacetoxy terminated, PSADT)

The in vitro degradation rate of polyanhydride （poly（sebacic acid）, diacetoxy terminated）, also known as PSADT, was investigated. PSADT tablets with a circular cross-section were formed using a compression molding device, and then immersed into phosphate buffer saline （PBS） for in vitro degradation experiments. The mechanisms of degradation and the degradation rate were characterized by the change in molecular weight and reduction in specimen mass. In addition, the effects of processing temperature and the geometry of the formed PSADT tablets on the rate of degradation were studied. The surface morphology at different degradation times was observed by scanning electron microscopy （SEM）. The experimental results showed that PSADT exhibited sur^hce erosion due to the fact that near zero-order degradation kinetics was observed during its degradation process. Moreover, it is found that the geometry of tablets played an important role on the rate of degradation, while the processing temperature had no significant effect on the PSADT degradation rate.

Estimation of OCDD degradation rate in soil

The current concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans （PCDD/Fs） were determined in soils contaminated with Chinese technical product sodium pentachlorophenate （ Na- PCP）. The estimated half-life of octachlorodioxin （OCDD） was about 14 years in contaminated soils based on the local historical record and mass balance calculation during the past 43 years（ 1960-2003）. The isomer profiles remained the same regardless of paddy field soil or riverbank soil. The results indicated that the congenerspecific information was efficient in estimating the PCDD/Fs fate in contaminated soils.

Characteristics and Degradation Mechanism of Fomesafen

High performance liquid chromatography(HPLC) was used to determine the degradation efficiency of bacteria 2 strain(B2 S) under different conditions, the optimum cultivation conditions for fomesafen degradation bacterium B2 S were as the followings: temperature 35℃; inoculation quantity 5%; p H 5.0; glucose content 0.5% and fomesafen concentration 10 mg · L-1. Under optimal conditions, B2 S degraded fomesafen within 72 h of fomesafen application, with a degradation rate of nearly 100%. High performance liquid chromatography-mass spectrometry(HPLC-MS) was used to analyze fomesafen degradation into microbial products. A more thorough understanding of microbial fomesafen degradation mechanisms was discussed. The pathway of fomesafen degradation by B2 S was also inferred herein.

Progress in Determination Methods of Degradation Rate in Ruminants

Degradation rate of feed proteins in rumen is a basic indicator of new intestinal protein system of ruminants. In this paper, determination methods of degradation rate in tureen including in-vivo method, nylon bag method and artificial rumen method are compared in order to provide a reference for animal nutrition.

Magnesium alloys as extremely promising alternatives for temporary orthopedic implants-A review

Mg alloys are emerging as potential and very promising alternatives for replacing permanent metallic implant materials such as steels and titanium in applications where the implants need to be removed following healing through revision surgery.Use of Mg alloys for implant application is seen as a game changer and Mg alloys are almost perfect materials for the future in both engineering and biomedical applications.Present review therefore focuses on highlighting significance of Mg alloys in biomedical field and risks of using permanent metallic implants particularly when the implants are no longer required after the injury is healed.In this review,importance of orthopedic implants in present scenario,serious concern related to accidents that are causing permanent disabilities,demand in orthopedic implant market worldwide,potential applications of Mg based materials and their compatibility in biological environment is presented and discussed.In addition,degradation rate,major reactions associated with Mg based materials and effect of alloying elements on implant performance are also discussed based on in-vivo results.Recent advances in development of Mg alloys through various techniques and their performance in in-vitro conditions are also outlined.Possible ways to eliminate the limitations of Mg alloys include alloying,melt purification,surface alterations,surface modifications,chemical treatment,secondary processing etc.are discussed.Challenges and opportunities for Mg alloys to become ideal implant material is also addressed.

Bioresorbable magnesium-based alloys containing strontium doped nanohydroxyapatite promotes bone healing in critical sized bone defect in rat femur shaft

Magnesium-based biomaterials have been in extensive research for orthopedic applications for decades due to their optimal mechanical features and osteopromotive nature;nevertheless,rapid degradation restricts their clinical applicability.In this study,pristine magnesium was purified(P-Mg)using a melt self-purification approach and reinforced using indigenously synthesized nanohydroxyapatite(HAP,0.6 wt.%)and strontium substituted nanohydroxyapatite(SrHAP,0.6 wt.%)using a low-cost stir assisted squeeze casting method to control their degradation rate.Using electron back-scattered diffraction(EBSD)and X-ray diffraction(XRD)examinations,all casted materials were carefully evaluated for microstructure and phase analysis.Mechanical characteristics,in vitro degradation,and in vitro biocompatibility with murine pre-osteoblasts were also tested on the fabricated alloys.For in vivo examination of bone formation,osteointegration,and degradation rate,the magnesium-based alloys were fabricated as small cylindrical pins with a diameter of 2.7 mm and a height of 2 mm.The pins were implanted in a critical-sized defect in a rat femur shaft(2.7 mm diameter and 2 mm depth)for 8 weeks and evaluated by microCT and histological evaluation for bone growth and osteointegration.When compared to P-Mg and P-MgHAP,micro-CT and histological analyses revealed that the P-MgSrHAP group had the highest bone formation towards the periphery of the implant and hence maximum osteointegration.When the removed pins from the bone defect were analyzed using GIXRD,they displayed hydroxyapatite peaks that were consistent with bio-integration.For P-Mg,P-MgHAP,and P-MgSrHAP 8 weeks after implantation,in vivo degradation rates derived from micro-CT were around 0.6 mm/year,0.5 mm/year,and 0.1 mm/year,respectively.Finally,P-MgSrHAP possesses the requisite degradation rate as well as sufficient mechanical and biological properties,indicating that it has the potential to be used in the development/fabrication of biodegradable bioactive orthopaedic implants.

Achieving exceptionally high strength and rapid degradation rate of Mg-Er-Ni alloy by strengthening with lamellar γ' and bulk LPSO phases

As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties were investigated.Coupling the bulk LPSO phase and the lamellar γ' phase,and controlling the dynamic recrystallization processes during deformation by adjusting the volume fraction of LPSO and the density of the γ' phase,a synergistic increase in strength and degradation rate can be achieved.On the one hand,the increase in corrosion rate was related to the increased volume fraction of the bulk LPSO phase and the densities of the lamellar γ' phase,which provide more galvanic corrosion.Moreover,high densities of the lamellar γ' phase can provide more corrosion interface by inhibiting the recrystallization process to refine dynamic recrystallized(DRXed)grains during the hot extrusion.On the other hand,the ultimate tensile strength(UTS)and tensile yield strength(TYS)of the Mg-Er-Ni alloy increased from 345 and 265 MPa to 514 MPa and 358 MPa,respectively,which was mainly attributed to grain boundary and texture strengthening,bulk LPSO phase and lamellar γ' phase strengthening.Overall,Mg^(-1)4Er-4Ni alloy,which contains the highest volume fraction bulk LPSO phase and the densities of lamellar γ' phase,re-alized a synergistic enhancement of strength and degradation rate.The UTS,TYS,and degradation rate of Mg^(-1)4Er-4Ni were 514 MPa,358 MPa,and 142.5 mg cm^(-2)h^(-1)(3 wt%KCl solution at 93◦C),respectively.This research provides new insight into developing Mg alloys with high strength and degradation rates for fracturing tool materials in the application of oil and gas exploitation in harsh environments.