[Objective] In order to study the relations among different positions, degrees of substitution and antioxidant ability. [Method] N, O-carboxymethyl chitosan （NOA, NOB and NOC）with various degrees of substitution （D...[Objective] In order to study the relations among different positions, degrees of substitution and antioxidant ability. [Method] N, O-carboxymethyl chitosan （NOA, NOB and NOC）with various degrees of substitution （DS）were obtained by etherizing chito-oligosacchaside. Their structure and substituted degree were characterized and their antioxldant activity to·OH was evaluated. [ Result] The IC50 s of NOA ,NOB and NOC were 0.15 ,0. 29 ,0. 23 mg/ml while their DSs of -NH2 position（DSN） were 0.51,0.29 and 0.38 and DSo were 0. 74 ,0. 84 ,0. 97respectively.[ Conclusion] With the increase of DSN ,antioxidant activity of N,O-carboxymethyl chitosan oligosaccharide to·OH was up.展开更多
This paper deals with the retention and drainage properties of the high substituted degree cationic starch (HCS) prepared by half-dry process. The experiments show that HCS has remarkable effects on filler retention a...This paper deals with the retention and drainage properties of the high substituted degree cationic starch (HCS) prepared by half-dry process. The experiments show that HCS has remarkable effects on filler retention and drainage in papermaking industry. With the degree of substitution (DS) of HCS increasing, the effects on filler retention and drainage increase. When the DS of HCS is 0.509 and the dosage is 0.08%, the freeness decreases about 12oSR and the filler retention is 79.82%.展开更多
Adhesive capacity of quaternary ammonium starch and starch phosphate to the polyester / cotton fibers was studied by means roving method for the purpose of improving the sizing performance and decreasing the cost. By ...Adhesive capacity of quaternary ammonium starch and starch phosphate to the polyester / cotton fibers was studied by means roving method for the purpose of improving the sizing performance and decreasing the cost. By introducing different amount of quaternary ammonium or phosphate groups onto starch molecules, the modified starch with a series of defferent degree of substitution was prepared. Therefore the regularity of adhesive capacity, extended property and size-absorbing ability with the change in degree of substitution (DS) was obtained through the researches. The experiments demonstrate that the DS of the two modified starches show a marked influence upon the properties mentioned above. The starch phosphate is superior to quaternary ammonium starch as warp size for polyester / cotton yarns from the viewpoint of adhesive capacity and cost, although both of them are better than natural one. To improve the adhesive capacity to polyester / cotton fibers, DS≥0.027 is necessary for quaternary ammonium展开更多
The effect of curing regime on degree ofAl3＋ substituting for Si^4＋ （Al/Si ratio） in C-S-H gels of hardened Portland cement pastes was investigated by 29Si magic angel spinning （MAS） nuclear magnetic resonance ...The effect of curing regime on degree ofAl3＋ substituting for Si^4＋ （Al/Si ratio） in C-S-H gels of hardened Portland cement pastes was investigated by 29Si magic angel spinning （MAS） nuclear magnetic resonance （NMR） with deconvolution technique. The curing regimes included the constant temperature （20, 40, 60 and 80 ℃） and variable temperature （simulated internal temperature of mass concrete with 60 ℃ peak）. The results indicate that constant temperature of 20 ℃ is beneficial to substitution ofAl3＋ for Si4＋, and AI/Si ratio changes to be steady after 180 d. The increase of Al/Si ratio at 40 ℃is less than that at 20℃ for 28 d. The other three regimes of high temperature increase Al/Si ratio only before 3 d, on the contrary to that from 3 to 28 d. However, the 20 ℃ curing stage from 28 to 180 d at variable temperature regime, is beneficial to the increase of AI/Si ratio which is still lower than that at constant temperature regime of 20 ℃ for the same age. A nonlinear relation exists between the Al/Si ratio and temperature variation or mean chain length （MCL） of C-S-H gels, furthermore, the amount ofAl3＋ which can occupy the bridging tetrahedra sites in C-S-H structure is insufficient in hardened Portland cement pastes.展开更多
Carboxymethylated cellulose nanofibril(CMCNF)is an effective green dispersant to prepare well-dispersed monolayer montmorillonites(MMTs)in water,thereby facilitating the preparation of a high-performance MMT/polymer n...Carboxymethylated cellulose nanofibril(CMCNF)is an effective green dispersant to prepare well-dispersed monolayer montmorillonites(MMTs)in water,thereby facilitating the preparation of a high-performance MMT/polymer nanocomposite film.However,not enough attention has been paid to correlating the degree of substitution(DS)of CMCNFs with the mechanical and optical properties of the final nanocomposite films.In this study,a series of homogeneous monolayer MMT nanoplatelet dispersions was prepared initially using CMCNFs with different DS as a dispersant,and the as-prepared CMCNF-dispersed MMT dispersions were then mixed with sodium carboxymethyl cellulose(CMC-Na)to fabricate nacre-like nanocomposite films with different contents of MMTs through self-assembly.The layered nanostructure and optical and mechanical properties of the asprepared CMCNF-dispersed MMT/CMC-Na nanocomposite films were investigated,which demonstrated that CMCNFs with lower DS have a positive effect on their optical and mechanical properties.This study sheds light on the preparation of MMT-based nanocomposite films with superior optical and mechanical properties.展开更多
In this article,structural characteristics of amorphous mono-,di-,and tri-substituted esters of cellulose have been studied.These esters were synthesized under homogenous conditions using anhydrides of various aliphat...In this article,structural characteristics of amorphous mono-,di-,and tri-substituted esters of cellulose have been studied.These esters were synthesized under homogenous conditions using anhydrides of various aliphatic acids.The specific gravity of the highly substituted samples was measured by a pycnometric method in the aqueous medium.To calculate the molar,Van der Waals,and free volumes,as well as the packing coefficient of amorphous esters the method of additive contributions of partial volumes of atoms and atom groups in the volumes of polymers was used.Based on the molar volume,also specific gravity of cellulose esters was calculated.The coincidence of calculated and experimental characteristics was shown.In addition,the relationship between glass transition temperature and free volume was found for the esters.The theoretical equations were derived,which provide predicting the structural characteristics of cellulose esters with different degrees of substitution.展开更多
Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethy...Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethylation of starch, acrylate constituent units of acrylate copolymers, and copolymer content of the film on the properties were investigated. The mechanical properties were evaluated in terms of tensile strength, breaking elongation, abrasion resistance, and flex-fatigue resistance. Film morphology was examined with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and atomic force microscope （AFM）. It was found that the properties depended on the degree of substitution of carboxymethyl starch, chemical structure of acrylate units, and content of acrylate copolymer. Phase-separation of the two ingredients occurred within film matrix and the separation was decreased after starch carboxymethylation. Breaking elongation and flex-fatigue resistance of the film reached maximmns when acrylate copolymer content was 50%. Excessively increasing the content of acrylate copolymer reduced the film properties.展开更多
Chitosans with various degrees of deacetylation (D.D.), which were used as standard sample for FTIR determination, were prepared from completely deacetylated chitosan by homogeneous N-acetylation reaction. By combinin...Chitosans with various degrees of deacetylation (D.D.), which were used as standard sample for FTIR determination, were prepared from completely deacetylated chitosan by homogeneous N-acetylation reaction. By combining four probable probe bands, i.e. 1655, 1560, 1380 and 1320 cm-1, eight probable reference bands, i.e. 3430, 2920, 2880, 1425, 1155, 1070, 1030 and 895 cm-1 and two baseline methods, the most suitable ratios Aprobe band/Areference band from IR spectra to determine the degree of acetylation of chitosan were evaluated from 48 combinations to be A1560/A2880, A1560/A2920 and A1655/A3430(A1560/A2880 is mostly recommended). The second baseline method, i.e. linking between adjacent two valleys, was better for measuring the absorbances of 1560 and 1655 cm-1 bands. The determination range of the D.D. (1%-100%) covered almost the whole range. The standard curves with A1560/A2880 and A1655/A3430 were also suitable for the determination of degree of substitution of other N-acylated chitosan, such as N-propionyl chitosan, N-butyryl chitosan and N-hexanoyl chitosan.展开更多
基金Supported by Shanghai Leading Academic Discipline(Project No.T1102)Shanghai Commission of Education Scientific Research Project(07zz134)~~
文摘[Objective] In order to study the relations among different positions, degrees of substitution and antioxidant ability. [Method] N, O-carboxymethyl chitosan （NOA, NOB and NOC）with various degrees of substitution （DS）were obtained by etherizing chito-oligosacchaside. Their structure and substituted degree were characterized and their antioxldant activity to·OH was evaluated. [ Result] The IC50 s of NOA ,NOB and NOC were 0.15 ,0. 29 ,0. 23 mg/ml while their DSs of -NH2 position（DSN） were 0.51,0.29 and 0.38 and DSo were 0. 74 ,0. 84 ,0. 97respectively.[ Conclusion] With the increase of DSN ,antioxidant activity of N,O-carboxymethyl chitosan oligosaccharide to·OH was up.
文摘This paper deals with the retention and drainage properties of the high substituted degree cationic starch (HCS) prepared by half-dry process. The experiments show that HCS has remarkable effects on filler retention and drainage in papermaking industry. With the degree of substitution (DS) of HCS increasing, the effects on filler retention and drainage increase. When the DS of HCS is 0.509 and the dosage is 0.08%, the freeness decreases about 12oSR and the filler retention is 79.82%.
文摘Adhesive capacity of quaternary ammonium starch and starch phosphate to the polyester / cotton fibers was studied by means roving method for the purpose of improving the sizing performance and decreasing the cost. By introducing different amount of quaternary ammonium or phosphate groups onto starch molecules, the modified starch with a series of defferent degree of substitution was prepared. Therefore the regularity of adhesive capacity, extended property and size-absorbing ability with the change in degree of substitution (DS) was obtained through the researches. The experiments demonstrate that the DS of the two modified starches show a marked influence upon the properties mentioned above. The starch phosphate is superior to quaternary ammonium starch as warp size for polyester / cotton yarns from the viewpoint of adhesive capacity and cost, although both of them are better than natural one. To improve the adhesive capacity to polyester / cotton fibers, DS≥0.027 is necessary for quaternary ammonium
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2009CB623201)National Natural Science Foundation of China(No.51302070)
文摘The effect of curing regime on degree ofAl3＋ substituting for Si^4＋ （Al/Si ratio） in C-S-H gels of hardened Portland cement pastes was investigated by 29Si magic angel spinning （MAS） nuclear magnetic resonance （NMR） with deconvolution technique. The curing regimes included the constant temperature （20, 40, 60 and 80 ℃） and variable temperature （simulated internal temperature of mass concrete with 60 ℃ peak）. The results indicate that constant temperature of 20 ℃ is beneficial to substitution ofAl3＋ for Si4＋, and AI/Si ratio changes to be steady after 180 d. The increase of Al/Si ratio at 40 ℃is less than that at 20℃ for 28 d. The other three regimes of high temperature increase Al/Si ratio only before 3 d, on the contrary to that from 3 to 28 d. However, the 20 ℃ curing stage from 28 to 180 d at variable temperature regime, is beneficial to the increase of AI/Si ratio which is still lower than that at constant temperature regime of 20 ℃ for the same age. A nonlinear relation exists between the Al/Si ratio and temperature variation or mean chain length （MCL） of C-S-H gels, furthermore, the amount ofAl3＋ which can occupy the bridging tetrahedra sites in C-S-H structure is insufficient in hardened Portland cement pastes.
基金We would like to thank for the financial support from the National Natural Science Foundation of China(21978103)the Natural Science Foundation of Guangdong Province(2020B1515020021)+2 种基金the Pearl River S&T Nova Program of Guangzhou(201806010141)the Foundation of Key Laboratory of Pulp and Paper Science and Technology of Ministry of Education/Shandong Province of China(KF201812)the Fundamental Research Funds for the Central Universities(2019MS083).
文摘Carboxymethylated cellulose nanofibril(CMCNF)is an effective green dispersant to prepare well-dispersed monolayer montmorillonites(MMTs)in water,thereby facilitating the preparation of a high-performance MMT/polymer nanocomposite film.However,not enough attention has been paid to correlating the degree of substitution(DS)of CMCNFs with the mechanical and optical properties of the final nanocomposite films.In this study,a series of homogeneous monolayer MMT nanoplatelet dispersions was prepared initially using CMCNFs with different DS as a dispersant,and the as-prepared CMCNF-dispersed MMT dispersions were then mixed with sodium carboxymethyl cellulose(CMC-Na)to fabricate nacre-like nanocomposite films with different contents of MMTs through self-assembly.The layered nanostructure and optical and mechanical properties of the asprepared CMCNF-dispersed MMT/CMC-Na nanocomposite films were investigated,which demonstrated that CMCNFs with lower DS have a positive effect on their optical and mechanical properties.This study sheds light on the preparation of MMT-based nanocomposite films with superior optical and mechanical properties.
文摘In this article,structural characteristics of amorphous mono-,di-,and tri-substituted esters of cellulose have been studied.These esters were synthesized under homogenous conditions using anhydrides of various aliphatic acids.The specific gravity of the highly substituted samples was measured by a pycnometric method in the aqueous medium.To calculate the molar,Van der Waals,and free volumes,as well as the packing coefficient of amorphous esters the method of additive contributions of partial volumes of atoms and atom groups in the volumes of polymers was used.Based on the molar volume,also specific gravity of cellulose esters was calculated.The coincidence of calculated and experimental characteristics was shown.In addition,the relationship between glass transition temperature and free volume was found for the esters.The theoretical equations were derived,which provide predicting the structural characteristics of cellulose esters with different degrees of substitution.
基金the Open Project Program of Key Laboratory of Eco-Textiles,Ministry of Education,China(No.KLET0617)
文摘Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethylation of starch, acrylate constituent units of acrylate copolymers, and copolymer content of the film on the properties were investigated. The mechanical properties were evaluated in terms of tensile strength, breaking elongation, abrasion resistance, and flex-fatigue resistance. Film morphology was examined with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and atomic force microscope （AFM）. It was found that the properties depended on the degree of substitution of carboxymethyl starch, chemical structure of acrylate units, and content of acrylate copolymer. Phase-separation of the two ingredients occurred within film matrix and the separation was decreased after starch carboxymethylation. Breaking elongation and flex-fatigue resistance of the film reached maximmns when acrylate copolymer content was 50%. Excessively increasing the content of acrylate copolymer reduced the film properties.
基金the National Natural Science Foundation of China (Grant No. 29974023) and the Natural Science Foundation of Fujian Province, China (Grant No. Z9910006).
文摘Chitosans with various degrees of deacetylation (D.D.), which were used as standard sample for FTIR determination, were prepared from completely deacetylated chitosan by homogeneous N-acetylation reaction. By combining four probable probe bands, i.e. 1655, 1560, 1380 and 1320 cm-1, eight probable reference bands, i.e. 3430, 2920, 2880, 1425, 1155, 1070, 1030 and 895 cm-1 and two baseline methods, the most suitable ratios Aprobe band/Areference band from IR spectra to determine the degree of acetylation of chitosan were evaluated from 48 combinations to be A1560/A2880, A1560/A2920 and A1655/A3430(A1560/A2880 is mostly recommended). The second baseline method, i.e. linking between adjacent two valleys, was better for measuring the absorbances of 1560 and 1655 cm-1 bands. The determination range of the D.D. (1%-100%) covered almost the whole range. The standard curves with A1560/A2880 and A1655/A3430 were also suitable for the determination of degree of substitution of other N-acylated chitosan, such as N-propionyl chitosan, N-butyryl chitosan and N-hexanoyl chitosan.
