Doppler radar by using single multicarrier pulse based on optical fibre delay lines

The proposed Doppler measurement technique shows that the Doppler measurements can be accomplished by a single pulse with multiple frequency components through optical fibre delay lines.Range and velocity ambiguity can be removed,and the velocity resolution can be improved dramatically by using long optical fibre delay lines.Furthermore,the velocity resolution can be modified by adjusting the length of optical fibre delay lines.In addition,the proposed radar can achieve high range resolution by using a single wideband pulse.As a result,the new approach can improve radar performance significantly.

Integrated optical delay lines:a review and perspective[Invited]

Optical delay lines（ODLs） are one of the key enabling components in photonic integrated circuits and systems.They are widely used in time-division multiplexing, optical signal synchronization and buffering, microwave signal processing, beam forming and steering, etc. The development of integrated photonics pushes forward the miniaturization of ODLs, offering improved performances in terms of stability, tuning speed, and power consumption. The integrated ODLs can be implemented using various structures, such as single or coupled resonators, gratings, photonic crystals, multi-path switchable structures, and recirculating loop structures.The delay tuning in ODLs is enabled by either changing the group refractive index of the waveguide or changing the length of the optical path. This paper reviews the recent development of integrated ODLs with a focus on their abundant applications and flexible implementations. The challenges and potentials of each type of ODLs are pointed out.

Optical True Time Delay for Phased Array Antennas Composed of 2×2 Optical MEMS Switches and Fiber Delay Lines

We proposed an optical true time delay (TTD) for phased array antennas (PAAs) composed of 2×2 optical MEMS switches, single-mode fiber delay lines, and a fixed wavelength laser diode. A 3-bit TTD for 10 GHz PAAs was implemented with a time delay error less than ± 0.2 ps.

A large bandwidth photonic delay line using passive cascaded silicon-on-insulator microring resonators

This paper investigated the design and the characterization of a photonic delay line based on passive cascaded silicon-on-insulator （SOI） microrings. We considered the compromise of group delay, bandwidth and insertion loss. A 3-stage double channel side-coupled integrated spaced sequence of resonator （SCISSOR） device was optimized by shifting the resonance of each microring and fabricated with electron beam lithography and dry etching. The group delay was measured to be 17 ps for non-return-to-zero signals at different bit rates and the bandwidth of 78 GHz was achieved. The experiment result agreed well with our simulation.

Synchronization and bidirectional communication without delay line using strong mutually coupled semiconductor lasers

This paper numerically demonstrates synchronization and bidirectional communication without delay line by using two semiconductor lasers with strong mutual injection in a face-to-face configuration. These results show that both of the two lasers＇ outputs synchronize with their input chaotic carriers. In addition, simulations demonstrate that this kind of synchronization can be used to realize bidirectional communications without delay line. Further studies indicate that within a small deviation in message amplitudes of two sides （±6%）, the message can be extracted with signal-noise-ratio more than 10 dB; and the signal-noise-ratio is extremely sensitive to the message rates mismatch of two sides, which may be used as a key of bidirectional communication.

Low-loss chip-scale programmable silicon photonic processor

Chip-scale programmable optical signal processors are often used to flexibly manipulate the optical signals for satisfying the demands in various applications,such as lidar,radar,and artificial intelligence.Silicon photonics has unique advantages of ultra-high integration density as well as CMOS compatibility,and thus makes it possible to develop large-scale programmable optical signal processors.The challenge is the high silicon waveguides propagation losses and the high calibration complexity for all tuning elements due to the random phase errors.In this paper,we propose and demonstrate a programmable silicon photonic processor for the first time by introducing low-loss multimode photonic waveguide spirals and low-random-phase-error Mach-Zehnder switches.The present chip-scale programmable silicon photonic processor comprises a 1×4 variable power splitter based on cascaded Mach-Zehnder couplers(MZCs),four Ge/Si photodetectors,four channels of thermally-tunable optical delaylines.Each channel consists of a continuously-tuning phase shifter based on a waveguide spiral with a micro-heater and a digitally-tuning delayline realized with cascaded waveguide-spiral delaylines and MZSs for 5.68 ps time-delay step.Particularly,these waveguide spirals used here are designed to be as wide as 2μm,enabling an ultralow propagation loss of 0.28 dB/cm.Meanwhile,these MZCs and MZSs are designed with 2-μm-wide arm waveguides,and thus the random phase errors in the MZC/MZS arms are negligible,in which case the calibration for these MZSs/MZCs becomes easy and furthermore the power consumption for compensating the phase errors can be reduced greatly.Finally,this programmable silicon photonic processor is demonstrated successfully to verify a number of distinctively different functionalities,including tunable time-delay,microwave photonic beamforming,arbitrary optical signal filtering,and arbitrary waveform generation.

Adaptive broadband beamformer for nonuniform linear array based on second order cone programming

Adaptive broadband beamforraing is a key issue in array applications. The adaptive broadband beamformer with tapped delay line （TDL） structure for nonuniform linear array （NLA） is designed according to the rule of minimizing the beamformer＇s output power while keeping the distortionless response （DR） in the direction of desired signal and keeping the constant beamwidth （CB） with the prescribed sidelobe level over the whole operating band. This kind of beamforming problem can be solved with the interior-point method after being converted to the form of standard second order cone programming （SOCP）. The computer simulations are presented which illustrate the effectiveness of our beamformer.

SRV constraint based FIB design for wideband linear array

Frequency-invariant beamformer （FIB） design is a key issue in wideband array signal processing. To use commonly wideband linear array with tapped delay line （TDL） structure and complex weights, the FIB design is provided according to the rule of minimizing the sidelobe level of the beampattern at the reference frequency while keeping the distortionless response constraint in the mainlobe direction at the reference frequency, the norm constraint of the weight vector and the amplitude constraint of the averaged spatial response variation （SRV）. This kind of beamformer design problem can be solved with the interior-point method after being converted to the form of standard second order cone programming （SOCP）. The computer simulations are presented which illustrate the effectiveness of our FIB design method for the wideband linear array with TDL structure and complex weights.

Ultrasonic beam steering using Neumann boundary condition in multiplysics

The traditional one-dimensional ultrasonic beam steering has time delay and is thus a complicated problem. A numerical model of ultrasonic beam steering using Neumann boundary condition in multiplysics is presented in the present paper. This model is based on the discrete wave number method that has been proved theoretically to satisfy the continuous conditions. The propagating angle of novel model is a function of the distance instead of the time domain. The propagating wave fronts at desired angles are simulated with the single line sources for plane wave. The result indicates that any beam angle can be steered by discrete line elements resources without any time delay.

V2V Channel Modeling at 5.2 GHz for Highway Environment

To design and evaluate vehicle-to-vehicle(V2V)communication systems in intelligent transportation system(ITS),it is important to understand the propagation mechanisms and channel models of V2V channels.This paper aims to analyze the channel models at 5.2 GHz for the highway environment in obstructed line-of-sight(OLoS)and line-of-sight(LoS)scenarios,particularly the vehicle connectivity probability derivation based on the propagation model obtained from measurement.First,the path loss(PL),shadow fading(SF),narrowband K-factor,and small-scale amplitude fading are analyzed.Results showed that the received signal magnitude follows Rice and Weibull distribution in LoS and OLoS scenarios,respectively.Second,we develop simple and low-complexity tapped delay line(TDL)models with a 10 MHz bandwidth for LoS and OLoS scenarios;in addition,we investigate the wideband K-factor,the root mean square delay spread(RMS-DS),and delay-Doppler spectrum.Third,we derive the closed form connectivity probability between any two vehicles in the presence of Weibull fading channel,and analyze the effects of Weibull fading channel and traffic parameters on connectivity.It is found that Weibull fading parameter,transmit power and vehicle density have positive impact on connectivity probability,PL exponent has negative impact on connectivity probability.

BD512模拟延迟线的原理及其应用

我所研制的BD512是一种新型集成电路,系集成戽链器件,它在音频处理方面有着广泛的用途。本文就BD512电路的原理和应用作了叙述。

PULSE SHRINKING TIME-TO-DIGITAL CONVERTER FOR UWB APPLICATION

A kind of architecture of Time-to-Digital Converter(TDC) for Ultra-WideBand(UWB) application is presented. The proposed TDC is based on pulse shrinking, and implemented in a Field Programmable Gate Array(FPGA) device. The pulse shrinking is realized in a loop containing two Programmable Delay Lines(PDLs) or a two-channel PDL. One line(channel) delays the rising edge and the other line(channel) delays the falling edge of a circulating pulse. Delay resolution of PDL is converted into a digital output code under known conditions of pulse width. This delay resolution measurement mechanism is different from the conventional time interval measurement mechanism based on pulse shrinking of conversion of unknown pulse width into a digital output code. This mechanism automatically avoids the influence of unwanted pulse shrinking by any circuit element apart from the lines. The achieved relative errors for four PDLs are within 0.80%–1.60%.

Fiber-delay-line-referenced optical frequency combs:three stabilization schemes

We demonstrate the stabilization of an optical frequency comb(OFC) using a segment of fiber delay line as a reference. A mode-locked Er-doped fiber laser is phase locked to a kilometer-long fiber delay line using three different schemes. The short-term stability of the comb modes in the OFC stabilized by these schemes is obviously enhanced, down to the 10;level at millisecond average time. Among these three schemes, phase locking two bunches of comb modes in the OFC to the same fiber delay line exhibits the lowest residual phase noise. Fiber-delay-line-referenced OFCs can provide reliable laser sources in precise metrology owing to the advances of low cost, compactness, and high integration.

Delay line readout of a large dimension multi-wire proportional chamber

A two dimensional multi-wire proportional chamber with delay line readout was developed, which has a large sensitive area of 30 cmx30 cm. Two cathode planes using printed circuit boards are orthogonally placed to give two coordinates of the impact point of the particle. Signals collected from the cathode strips are amplified and discriminated from two ends of the delay line at each cathode board. By recording the time difference between the two discrimination pulses and the common gate pulse from anode wires, a coordinate position was reconstructed, and a position resolution of better than 1 mm could be obtained in the whole sensitive area along the anode wires.

A high-linearity and high-resolution delay line structure with a calibration algorithm in delay-based LINC transmitters

In order to overcome the bottleneck of low linearity and low resolution, an improved delay line structure is proposed with a calibration algorithm to conquer PVT （process, voltage and temperature） variations for an all- digital design. The chip is implemented in 0.13 μm CMOS technology. Measurement results show that the proposed structure with the calibration algorithm can evidently improve the linearity and resolution of the delay line. The delay resolution is 2 ps and the root mean square jitter of the delay is 4.71 ps, leading to an error vector magnitude enhancement of 1.32 dB.

On-Chip Built-in Jitter Measurement Circuit for PLL Based on Duty-Cycle Modulation Vernier Delay Line

Phase-locked loops (PLLs) are essential wherever a local event is synchronized with a periodic external event. They are utilized as on-chip clock frequency generators to synthesize a low skew and higher internal frequency clock from an external lower frequency signal and its characterization and measurement have recently been calling for more and more attention. In this paper, a built-in on-chip circuit for measuring jitter of PLL based on a duty cycle modulation vernier delay line is proposed and demonstrated. The circuit employs two delay lines to measure the timing difference and transform the difference signal into digital words. The vernier lines are composed of delay cells whose duty cycle can be adjusted by a feedback voltage. It enables the circuit to have a self calibration capability which eliminates the mismatch problem caused by the process variation.

Development of a surface acoustic wave wireless and passive temperature sensor incorporating reflective delay line

based on optimal design on the core element of the sensor,a wireless and passive surface acoustic wave（SAW）temperature sensor integrated with ID Tag was presented.A reflective delay line,which consists of a transducer and eight reflectors on YZ LiNbO3 substrate.Was fabricated as the sensor element,in which,three reflectors were used for temperature sensing,and the other five were for the ID Tag using phase encoding.Single phase unidirectional transducers（SPUDTs）and shorted grating were used to structure the sAW device,leading to excellent signal to noise ratio（SNR）.The performance of the SAW device was simulated by the coupling of modes（COM）prior to fabrication.Using the network analyzer,the response in time domain of the fabricated 434 MHz SAW sensor was characterized,the measured S11 agrees well with the simulated one,sharp reflection peaks,high signal/noise,and low spurious noise between the reflection peaks were observed.Using the radar system based on FSCW as the reader unit.the developed SAW temperature sensors were evaluated wirelessly.Excellent1 inearity and good resolution of士1℃ were observed.

All-fiber-based ultrastable laser with long-term frequency stability of 1.1×10^(-14)

We demonstrate an ultrastable miniaturized transportable laser system at 1550 nm by locking it to an optical fiber delay line[FDL].To achieve optimized long-term frequency stability,the FDL was placed into a vacuum chamber with a five-layer thermal shield,and a delicate two-stage active temperature stabilization,an optical power stabilization,and an RF power stabilization were applied in the system.A fractional frequency stability of better than 3.2×10^[-15]at 1 s averaging time and1.1×10^[-14]at 1000 s averaging time was achieved,which is the best long-term frequency stability of an all-fiber-based ultrastable laser observed to date.

Tunable hexagonal boron nitride topological optical delay line in the visible region

Tunability,ultracompact design,high group index,low loss,and broad bandwidth are desired properties for integrated optical delay lines(ODLs).However,those properties are challenging to achieve simultaneously in the visible region.This paper proposes a tunable hexagonal boron nitride topological optical delay line(ODL)in the visible region based on valley photonic crystals.The topological edge state from the beard-type boundary allows the achievement of an ultralow group velocity close to zero,which results in a large group index of 629 at 645 nm.Moreover,we demonstrate tuning of the slow-light wavelength and optical delay times with electrically tunable liquid crystals by applying external voltage.The device has an ultracompact size of 5μm×2.7μm with an optical delay distance of 25a(a is the lattice constant)and a delay time of 12 ps.Our design can provide a new possibility for designing ODLs working in the visible region for optical communication and quantum computing systems.

A normal-pressure MWPC for beam diagnostics at RIBLL2

A normal pressure MWPC for beam diagnostics at RIBLL2 has been developed, wmcn has a sensluve area of 80 mm×80 mm and consists of three-layer wire planes. The anode plane is designed with a wider frame to reduce the discharge and without using protection wires. The detector has been tested with a 55Fe X-ray source and a 200 MeV/u ^12C beam from CSRm. A position resdution better than 250 μm along the anode wires and a detection efficiency higher than 90% have been achieved.