Effect of plasma on combustion characteristics of boron

As it is very difficult to release boron energy completely, kinetic mechanism of boron is not clear, which leads to the lack of theoretical guidance for studying how to accelerate boron combustion. A new semi-empirical boron combustion model is built on the King combustion model, which contains a chemical reaction path; two new methods of plasma-assisted boron combustion based on kinetic and thermal effects respectively are built on the ZDPLASKIN zero-dimensional plasma model. A plasma-supporting system is constructed based on the planar flame, discharge characteristics and the spectral characteristics of plasma and boron combustion are analyzed. The results show that discharge power does not change the sorts of excited-particles, but which can change the concentration of excited-particles. Under this experimental condition,plasma kinetic effect will become the strongest at the discharge power of 40 W; when the discharge power is less than 40 W,plasma mainly has kinetic effect, otherwise plasma has thermal effect. Numerical simulation result based on plasma kinetic effect is consistent with the experimental result at the discharge power of 40 W, and boron ignition delay time is shortened by 53.8% at the discharge power of 40 W, which indicates that plasma accelerates boron combustion has reaction kinetic paths, while the ability to accelerate boron combustion based on thermal effect is limited.

Influences of different diluents on ignition delay of syngas at gas turbine conditions：A numerical study

Ignition delay of syngas is an important factor that affects stable operation of combustor and adding diluents to syngas can reduce NO_x emission.This paper used H_2O,CO_2 and N_2 as diluents and calculated ignition delay of syngas in temperature range of 900-1400 K and at pressures of 10 and 30 atm respectively.In high temperature range,comparing with N_2 dilution,adding H_2O and CO_2 can significantly inhibit autoignition of syngas because they have higher collision efficiencies in reaction H + O_2(+ M) = HO_2(+ M).As for low temperature conditions,adding H_2O can increase reactivity of syngas,especially under high pressure,because of its high collision efficiency in reaction H_2O_2(+ M) = 2OH(+ M).Comparing with different dilution rates shows that for syngas and operating conditions in this paper,adding N_2 mainly influences temperature rising process of syngas combustion,thus inhibiting reactivity of syngas.In addition,this paper calculated ignition delay of syngas at different equivalence ratios(φ= 0.5,1.0).Higher equivalence ratio(φ≤1) means that less air(especially N_2) needs to be heated,thus promoting ignition of syngas,