Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an ...Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an asymmetric F-P interferometric cavity with good linearity and wide dynamic range is designed. And by choosing the material of two different thin metallic layers, the asymmetric F-P interferometric cavity is successfully fabricated. The design theory and method of this asymmetric F-P interferometric cavity have been described in detailed. In this paper an asymmetric F-P interferometric cavity used in fiber optical sensor is reported.展开更多
By using a graded-index multimode fiber （GI-MMF） with a relatively flat index profile and high refractive index of the fiber core, a microextrinsic fiber-optic Fabry Prot interferometric （MEFPI） strain sensor is f...By using a graded-index multimode fiber （GI-MMF） with a relatively flat index profile and high refractive index of the fiber core, a microextrinsic fiber-optic Fabry Prot interferometric （MEFPI） strain sensor is fabricated through chemical etching and fusion splicing. Higher reflectance of the microcavity is obtained due to the less-curved inner wall in the center of the fiber core after etching and higher index contrast between the GI-MMF core and air. The maximum reflection of the sensor is enhanced 12 dB than that obtained by etching of the Er- or B-doped fibers. High fringe contrast of 22 dB is obtained. The strain and temperature responses of the MEFPI sensors are investigated in this experiment. Good linearity and high sensitivity are achieved, with wavelength-strain and wavelength-temperature sensitivities of 7.82 pm/με and 5.01 pm/°C, respectively.展开更多
Cantilevers in microelectromechanical systems have the advantages of non-labeling,real-time detection,positioning,and specificity.Rectangular solid,rectangular hollow,and triangular microcantilevers were fabricated on...Cantilevers in microelectromechanical systems have the advantages of non-labeling,real-time detection,positioning,and specificity.Rectangular solid,rectangular hollow,and triangular microcantilevers were fabricated on an optical fiber tip via two-photon polymerization.The mechanical properties were characterized using finite element simulations.Coating the microcantilever with a palladium film enabled high sensitivity and rapid hydrogen detection.The shape of the cantilever determines the sensitivity,whereas the thickness of the palladium film determines the response time.Additional microelectromechanical systems can be realized via polymerization combined with optical fibers.展开更多
基金This work was supported by the National "863" Project of China (No. 2003AA311022)the National "973" Project of China (No. 2004CB719804)the National Natural Science Foundation of China (No. 10274108)the Natural Science Foundation of Guangdong Province of China.
文摘Good linearity and wide dynamic range are the advantages of asymmetric Fabry-Pérot （F-P） interferometric cavity, whose realization has been long for. Based on optical thin film characteristic matrix theory, an asymmetric F-P interferometric cavity with good linearity and wide dynamic range is designed. And by choosing the material of two different thin metallic layers, the asymmetric F-P interferometric cavity is successfully fabricated. The design theory and method of this asymmetric F-P interferometric cavity have been described in detailed. In this paper an asymmetric F-P interferometric cavity used in fiber optical sensor is reported.
基金supported by the State Key Laboratory of Advanced Optical Communication Systems and Networks,China
文摘By using a graded-index multimode fiber （GI-MMF） with a relatively flat index profile and high refractive index of the fiber core, a microextrinsic fiber-optic Fabry Prot interferometric （MEFPI） strain sensor is fabricated through chemical etching and fusion splicing. Higher reflectance of the microcavity is obtained due to the less-curved inner wall in the center of the fiber core after etching and higher index contrast between the GI-MMF core and air. The maximum reflection of the sensor is enhanced 12 dB than that obtained by etching of the Er- or B-doped fibers. High fringe contrast of 22 dB is obtained. The strain and temperature responses of the MEFPI sensors are investigated in this experiment. Good linearity and high sensitivity are achieved, with wavelength-strain and wavelength-temperature sensitivities of 7.82 pm/με and 5.01 pm/°C, respectively.
基金the National Natural Science Foundation of China(NSFC)(62122057,62075136)the Natural Science Foundation of Guangdong Province(2018B030306003,2020A0505100066)the Science and Technology Innovation Commission of Shenzhen(JCYJ20200109114001806,RCYX20200714114524139,JCYJ20180507184503128).
文摘Cantilevers in microelectromechanical systems have the advantages of non-labeling,real-time detection,positioning,and specificity.Rectangular solid,rectangular hollow,and triangular microcantilevers were fabricated on an optical fiber tip via two-photon polymerization.The mechanical properties were characterized using finite element simulations.Coating the microcantilever with a palladium film enabled high sensitivity and rapid hydrogen detection.The shape of the cantilever determines the sensitivity,whereas the thickness of the palladium film determines the response time.Additional microelectromechanical systems can be realized via polymerization combined with optical fibers.
