In this study, simultaneous nitrification and autotrophic denitrification (SNAD) with either elemental sulfur or pyrite were investigated in fluidized bed reactors in mesophilic conditions. The reactor performance was...In this study, simultaneous nitrification and autotrophic denitrification (SNAD) with either elemental sulfur or pyrite were investigated in fluidized bed reactors in mesophilic conditions. The reactor performance was evaluated at different ammonium (12-40 mg/L of NH4+-N), nitrate (35-45 mg/L of NO3--N), and dissolved oxygen (DO) (0.1-1.5 mg/L) concentrations, with a hydraulic retention time of 12 h. The pyrite reactor supported the SNAD process with a maximum nitrogen removal efficiency of 139.5 mg/(L·d) when the DO concentration was in the range of 0.8-1.5 mg/L. This range, however, limited the denitrification efficiency of the reactor, which decreased from 90.0% ± 5.3% in phases II-V to 67.9% ± 7.2% in phases VI and VII. Sulfate precipitated as iron sulfate (FeSO4/Fe2(SO4)3) and sodium sulfate (Na2SO4) minerals during the experiment. The sulfur reactor did not respond well to nitrification with a low and unstable ammonium removal efficiency, while denitrification occurred with a nitrate removal efficiency of 97.8%. In the pyrite system, the nitrifying bacterium Nitrosomonas sp. was present, and its relative abundance increased from 0.1% to 1.1%, while the autotrophic denitrifying genera Terrimonas, Ferruginibacter, and Denitratimonas dominated the community. Thiobacillus, Sulfurovum, and Trichlorobacter were the most abundant genera in the sulfur reactor during the entire experiment.展开更多
Selective catalytic reduction(SCR)is a technology by which nitrogen oxides are converted with the aid of a catalyst into diatomic nitrogen and water.It is known that the catalyst can be easily eroded if a cement kiln ...Selective catalytic reduction(SCR)is a technology by which nitrogen oxides are converted with the aid of a catalyst into diatomic nitrogen and water.It is known that the catalyst can be easily eroded if a cement kiln with a high-dust content is considered.To understand this process,numerical simulations have been carried out considering a single catalyst channel in order to study the collision and erosion of fly ash and catalysts at meso scale.Based on a response surface methodology,the effects of five factors on the erosion rate have been studied,namely,the catalyst particle velocity,the particle size,the particle concentration,the incidence angle and the catalyst porosity.The results show that the influence of particle velocity,particle size and particle concentration is statistically significant and the particle size and incidence angle have a significant effect on the erosion rate.A quadratic polynomial prediction model for the erosion rate of honeycomb catalysts in cement kiln SCR reactors is finally proposed to support the future optimization of these systems.展开更多
基金supported by the Science Foundation Ireland(SFI)through the SFI Research Professorship Programme entitled"Innovative Energy Technologies for Biofuels,Bioenergy and a Sustainable Irish Bioeconomy"(IETSBIO3Grant No.15/RP/2763)the Research Infrastructure Research Grant Platform for Biofuel Analysis(Grant No.16/RI/3401).
文摘In this study, simultaneous nitrification and autotrophic denitrification (SNAD) with either elemental sulfur or pyrite were investigated in fluidized bed reactors in mesophilic conditions. The reactor performance was evaluated at different ammonium (12-40 mg/L of NH4+-N), nitrate (35-45 mg/L of NO3--N), and dissolved oxygen (DO) (0.1-1.5 mg/L) concentrations, with a hydraulic retention time of 12 h. The pyrite reactor supported the SNAD process with a maximum nitrogen removal efficiency of 139.5 mg/(L·d) when the DO concentration was in the range of 0.8-1.5 mg/L. This range, however, limited the denitrification efficiency of the reactor, which decreased from 90.0% ± 5.3% in phases II-V to 67.9% ± 7.2% in phases VI and VII. Sulfate precipitated as iron sulfate (FeSO4/Fe2(SO4)3) and sodium sulfate (Na2SO4) minerals during the experiment. The sulfur reactor did not respond well to nitrification with a low and unstable ammonium removal efficiency, while denitrification occurred with a nitrate removal efficiency of 97.8%. In the pyrite system, the nitrifying bacterium Nitrosomonas sp. was present, and its relative abundance increased from 0.1% to 1.1%, while the autotrophic denitrifying genera Terrimonas, Ferruginibacter, and Denitratimonas dominated the community. Thiobacillus, Sulfurovum, and Trichlorobacter were the most abundant genera in the sulfur reactor during the entire experiment.
基金supported by the Eco-Environment Project of the Key Research and Development Program of Anhui Province(No.202104i07020016).
文摘Selective catalytic reduction(SCR)is a technology by which nitrogen oxides are converted with the aid of a catalyst into diatomic nitrogen and water.It is known that the catalyst can be easily eroded if a cement kiln with a high-dust content is considered.To understand this process,numerical simulations have been carried out considering a single catalyst channel in order to study the collision and erosion of fly ash and catalysts at meso scale.Based on a response surface methodology,the effects of five factors on the erosion rate have been studied,namely,the catalyst particle velocity,the particle size,the particle concentration,the incidence angle and the catalyst porosity.The results show that the influence of particle velocity,particle size and particle concentration is statistically significant and the particle size and incidence angle have a significant effect on the erosion rate.A quadratic polynomial prediction model for the erosion rate of honeycomb catalysts in cement kiln SCR reactors is finally proposed to support the future optimization of these systems.
