Direct atomic-level insight into oxygen reduction reaction on size-dependent Pt-based electrocatalysts from density functional theory calculations

Developing novel oxygen reduction reaction(ORR)catalysts with high activity is urgent for proton exchange membrane fuel cells.Herein,we investigated a group of size-dependent Pt-based catalysts as promising ORR catalysts by density functional theory calculations,ranging from single-atom,nanocluster to bulk Pt catalysts.The results showed that the ORR overpotential of these Pt-based catalysts increased when its size enlarged to the nanoparticle scale or reduced to the single-atom scale,and the Pt_(38)cluster had the lowest ORR overpotential(0.46 V)compared with that of Pt_(111)(0.57 V)and single atom Pt(0.7 V).Moreover,we established a volcano curve relationship between the ORR overpotential and binding energy of O*(ΔE_(O*),confirming the intermediate species anchored on Pt38cluster with suitable binding energy located at top of volcano curve.The interaction between intermediate species and Pt-based catalysts were also investigated by the charge distribution and projected density of state and which further confirmed the results of volcano curve.

Comparison of Fungicidal Difference of Two Arylpyrazoles Based on the Crystal Structures, Density Functional Theory Calculation and Molecular Docking

Two arylpyrazoles I andⅡwere synthesized and characterized by NMR and single-crystal X-ray diffraction.Compound I displayed 71.4%fungicidal inhibition rate against Rhizoctonia solani at 0.1 ppm,better than the control pyraclostrobin,whereasⅡhad little activity.Their fungicidal difference was discussed from theoretic level based on the crystal structure,density functional theory(DFT)calculation and molecular docking.The B3 LYP/6-31G^**level was employed to explore the HOMO-LUMO energy gap and charge distribution.Molecular docking was performed on the probable target protein bc1-enzyme complex.DFT calculation and docking studies supported the in vitro findings.

Ultraviolet laser ionization studies of 1-fluoronaphthalene clusters and density functional theory calculations

This paper studies supersonic jet-cooled 1-fluoronaphthalene （1FN） clusters by ultraviolet （UV） laser ionization at 281 nm in a time-of-flight mass spectrometer. The （1FN）＋ （n=1-3） series cluster ions are observed where the signal intensity decreases with increasing cluster size. The effects of sample inlet pressures and ionization laser fluxes to mass spectral distribution are measured. Using density functional theory calculations, it obtains a planar geometric structure of 1FN dimer which is combined through two hydrogen bonds. The mass spectra indicate that the intensity of 1FN trimer is much weaker than that of 1FN dimer and this feature is attributed to the fact that the dimer may form the first ＂shell＂ in geometric structure while the larger clusters are generated based on this fundamental unit.

Local Structure Analysis of Lead Zinc Niobate-Barium Titanate Ceramic by X-Ray Absorption Spectroscopy and Density Functional Calculation

The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaTiO33 perovskite phase stabilizer. Then, x-ray absorption spectroscopy and density functional theory are employed to calculate the local structure configuration and formation energy of the prepared samples. Ba2＋ is found to replace Pb2＋ in AA-site with Zn2＋ occupying BB-site in Pb（Zn1/3Nb2/3）O3, while in the neighboring structure, Ti4＋4＋ replaces Nb5＋5＋ in BB-site with Pb2＋2＋ occupying AA-site. With the substitution of BaTiO33 in Pb（Zn1/3Nb2/3）O3, the bond length between Zn2＋ and Pb2＋ is longer than that of the typical perovskite phase of Pb（Zn1/3Nb2/3）O3. This indicates the key role of BaTiO33 in decreasing the steric hindrance of Pb2＋ lone pair, and the mutual interactions between Pb2＋ lone pair and Zn2＋ and the formation energy is seen to decrease. This finding of the formation energy and local structure configuration relationship can further extend a fundamental understanding of the role of BaTiO33 in stabilizing the perovskite phase in PbZn13Nb23O3-based materials, which in turn will lead to an improved preparation technique for desired electrical properties.

Assignment of terahertz vibrational modes of L-glutamine using density functional theory within generalized-gradient approximation

The crystal structure of L-glutamine is stabilized by a three-dimensional network of intermolecular hydrogen bonds.We utilize plane-wave density functional theory lattice-dynamics calculations within the generalized-gradient approximation（GGA）, Perdew–Burke–Ernzerhof（PBE）, PBE for solids（PBEsol）, PBE with Wu–Cohen exchange（WC）, and dispersion-corrected PBE, to investigate the effect of these intermolecular contacts on the absorption spectra of glutamine in the terahertz frequency range. Among these calculations, the solid-state simulated results obtained using the WC method exhibit a good agreement with the measured absorption spectra, and the absorption features are assigned with the help of WC. This indicates that the vibrational modes of glutamine were related to the combination of intramolecular and intermolecular motions, the intramolecular modes were dominated by rocking or torsion involving functional groups; the intermolecular modes mainly result from the translational motions of individual molecules, and the rocking of the hydrogenbonded functional groups.

Effect of Pd doping on CH_4 reactivity over Co_3O_4 catalysts from density-functional theory calculations

Palladium oxide(PdOx)and cobalt oxide(Co3O4)are efficient catalysts for methane(CH4)combustion,and Pd‐doped Co3O4catalysts have been found to exhibit better catalytic activities,which suggest synergism between the two components.We carried out first‐principles calculations at the PBE+U level to investigate the Pd‐doping effect on CH4reactivity over the Co3O4catalyst.Because of the structural complexity of the Pd‐doped Co3O4catalyst,we built Pd‐doped catalyst models using Co3O4(001)slabs with two different terminations and examined CH4reactivity over the possible Pd?O active sites.A low energy barrier of0.68eV was predicted for CH4dissociation over the more reactive Pd‐doped Co3O4(001)surface,which was much lower than the0.98and0.89eV that was predicted previously over the more reactive pure Co3O4(001)and(011)surfaces,respectively.Using a simple model,we predicted CH4reaction rates over the pure Co3O4(001)and(011)surfaces,and Co3O4(001)surfaces with different amounts of Pd dopant.Our theoretical results agree well with the available experimental data,which suggests a strong synergy between the Pd dopant and the Co3O4catalyst,and leads to a significant increase in CH4reaction rate.

Transition‐metal‐atom‐pairs deposited on g‐CN monolayer for nitrogen reduction reaction:Density functional theory calculations

The development of highly active DFT catalysts for an electrocatalytic N_(2)reduction reaction(NRR)under mild conditions is a difficult challenge.In this study,a series of atom‐pair catalysts(APCs)for an NRR were fabricated using transition‐metal(TM)atoms(TM=Sc−Zn)doped into g‐CN monolayers.The electrochemical mechanism of APCs for an NRR has been reported by well‐defined density functional theory calculations.The calculated limiting potentials were−0.47 and−0.78 V for the Fe_(2)@CN and Co_(2)@CN catalysts,respectively.Owing to its high suppression of hydrogen evolution reactions,Co_(2)@CN is a superior electrocatalytic material for a N_(2)fixation.Stable Fe_(2)@CN may be a strongly attractive material for an NRR with a relatively low overpotential after an improvement in the selectivity.The two‐way charge transfer affirmed the donation‐acceptance procedure between N_(2)and Fe_(2)@CN or Co_(2)@CN,which play a crucial role in the activation of inert N≡N bonds.This study provides an in‐depth investigation into atom‐pair catalysts and will open up new avenues for highly efficient g‐CN‐based nanostructures for an NRR.

New ternary superconducting compound LaRu2As2： Physical properties from density functional theory calculations

In this paper, we perform the density functional theory （DFT） -based calculations by the first-principles pseudopo- tential method to investigate the physical properties of the newly discovered superconductor LaRu2As2 for the first time. The optimized structural parameters are in good agreement with the experimental results. The calculated independent elas- tic constants ensure the mechanical stability of the compound. The calculated Cauchy pressure, Pugh＇s ratio as well as Poisson＇s ratio indicate that LaRu2As2 should behave as a ductile material. Due to low Debye temperature, LaRu2As2 may be used as a thermal barrier coating （TBC） material. The new compound should exhibit metallic nature as its valence bands overlap considerably with the conduction bands. LaRu2As2 is expected to be a soft material and easily machinable because of its low hardness value of 6.8 GPa. The multi-band nature is observed in the calculated Fermi surface. A highly anisotropic combination of ionic, covalent and metallic interactions is expected to be in accordance with charge density calculation.

Density Functional Theory and Electrochemistry Studies on LiFexMn1-xPO4 Solid Solutions

The thermodynamic stability and lithiated/delithiated potentials of LiFexMn1-xPO4 were studied with density functional theorical calculations. The results show that the formation free energy of the LiFexMn1-xPO4 solid solution is slightly higher than that of the phase-separated mixture of LiFePO4 and LiMnPO4, and the two forms may co-exist in the actual LiFexMn1-xPO4 materials. The calculation manifests that the lithiated/delithiated potentials of LiFexMn1-xPO4 solid solutions vary via the Mn/Fe ratio and the spatial arrangements of the transition metal ions, and the result is used to explain the shape of capacity-voltage curves. Experimentally, we have synthesized the LiFexMn1-xPO4 materials by solid-phase reaction method. The existence of the LiFexMn1-xPO4 solid solution is thought to be responsible for the appearance of additional capacity-voltage plateau observed in the experiment.

Impact of Arsenic Related Defects on Electronic Performance of ZrO2/GaAs:Density Functional Theory Calculations

Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlocal B3LYP hybrid functional to study arsenic related defects in ZrO2. Via band alignments between the OaAs and ZrO2, we are able to determine the defect formation energy in the GaAs relative to the ZrO2 band gap and assess how they will affect the device performance. Arsenic at the interstitial site serves as a source of positive fixed charge while at the oxygen or zirconium substitutional site changes its charge state within the band gap of GaAs. Moreover, it is found that arsenic related defects produce conduction band offset reduction and gap states, which will increase the gate leakage current.

Density Functional Theory for Battery Materials

Batteries are the most widely used energy storage devices, and the lithiumion battery is the most heavily commercialized and most widely used battery type in the industry. However, the current rapid development of society requires a major advancement in battery materials to achieve high capacity,long life cycle, low cost, and reliable safety. Therefore, many new efficient energy storage materials and battery systems are being developed and explored, and their working mechanisms must be clearly understood before industrial application. In recent years, density functional theory (DFT) has been employed in the energy storage field and has made significant contributions to the understanding of electrochemical reaction mechanisms and to virtual screening of promising energy storage materials. In this review,the applications of DFT to battery materials are summarized and exemplified by some representative and up-to-date studies in the literature. The main focuses in this review include the following:1) structural stability estimation by cohesive energy, formation energy, Gibbs free energy, and phonon dispersion spectra calculations;2) the Gibbs free energy calculations for electrochemical reactions, corresponding open-circuit voltage, and theoretical capacity predictions of batteries;3) the analyses of molecule orbitals, band structures, density of states (DOS), and charge distribution of battery materials;4) ion transport kinetics in battery materials;5) simulations of adsorption processes. We conclude the review with the discussion of the assessments and validation of the popular functionals against several benchmarks, and a few suggestions have been given for the selection of density functionals for battery material systems.

How to Extend the Bridge Density Functional Approximation to the Confined Non-hard Sphere Fluid

A theoretical method was proposed to extend a bridge density functional approximation （BDFA） for the non-uniform hard sphere fluid to the non-uniform Lennard-Jones （LJ） fluid. The DFT approach for LJ fluid is simple, quantitatively accurate in a wide range of coexistence phase and external field parameters. Especially, the DFT approach only needs a second order direct correlation function （DCF） of the coexistence bulk fluid as input, and is therefore applicable to the subcritical temperature region. The present theoretical method can be regarded as a non-uniform counterpart of the thermodynamic perturbation theory, in which it is not at the level of the free energy but at the level of the second order DCF.the National Natural Science Foundation of China （No. 20546004） and the Natural Science Foundation of Education Department of Hunan Province （No.04C711）.

Specification of Density Functional Approximation by Radial Distribution Function of Bulk Fluid

A systematic methodology is proposed to deal with the weighted density approximation version of clas-sical density functional theory by employing the knowledge of radial distribution function of bulk fluid. The presentmethodology results from the concept of universality of the free energy density functional combined with the test particlemethod. It is shown that the new method is very accurate for the predictions of density distribution ofa hard sphere fluidat different confining geometries. The physical foundation of the present methodology is also applied to the quantumdensity functional theory.

Tetraethylenepentamine-functionalized magnetic mesoporous composites as a novel adsorbent for the removal Cr(Ⅲ)-ethylenediaminetetraacetic acid in complex solution

A novel tetraethylenepentamine(TEPA) functionalized magnetic mesoporous silica adsorbent(FNMs/TEPA) was prepared for the adsorption of Cr(Ⅲ)-ethylenediaminetetraacetic acid(EDTA)from wastewater. The characterization of the prepared adsorbent certified that TEPA was modified onto the magnetic mesoporous silicon(FNMs), while FNMs/TEPA maintained the ordered mesoporous and pristine magnetic properties. The batch adsorption experiments demonstrated that TEPA significantly enhanced the removal capacity of the adsorbent for Cr(Ⅲ)-EDTA. FNMs/TEPA exhibited an excellent adsorption property(13.84 mg·g-1) at p H 4.0. Even in the presence of high concentrations of coexisting ions and organic acids, the adsorption performance of FNMs/TEPA was stable. Experimental characterization and DFT demonstrated that the adsorption of Cr(Ⅲ)-EDTA was ascribed to the electrostatic interaction, hydrogen bonding, and complexation between Cr(Ⅲ)-EDTA and amino groups on the adsorbent surface. The analysis of the independent gradient model(IGM) shows that electrostatic interaction is the main mode of action in the adsorption process. Moreover, FNMs/TEPA demonstrated remarkable reusability in three regeneration cycles. These findings indicated that FNMs/TEPA possessed excellent application prospects in the disposal of wastewater containing Cr(Ⅲ)-EDTA.

Atomic orbitals modulated dual functional bimetallic phosphides derived from MOF on MOF structure for boosting high efficient overall water splitting

The electronic modulation characteristics of efficient metal phosphide electrocatalysts can be utilized to tune the performance of oxygen evolution reaction(OER).However,improving the overall water splitting performance remains a challenging task.By building metal organic framework(MOF)on MOF heterostructures,an efficient strategy for controlling the electrical structure of MOFs was presented in this study.ZIF-67 was in-situ synthesized on MIL-88(Fe)using a two-step self-assembly method,followed by low-temperature phosphorization to ultimately synthesize FeP-CoP_(3)bimetallic phosphides.By combining atomic orbital theory and theoretical calculations(density functional theory),the results reveal the successful modulation of electronic orbitals in FeP-CoP_(3)bimetallic phosphides,which are synthesized from MOF on MOF structure.The synergistic impact of the metal center Co species and the phase conjugation of both kinds of MOFs are responsible for this regulatory phenomenon.Therefore,the catalyst demonstrates excellent properties,demonstrating HER 81 mV(η10)in a 1.0 mol L^(−1)KOH solution and OER 239 mV(η50)low overpotentials.The FeP-CoP_(3)linked dual electrode alkaline batteries,which are bifunctional electrocatalysts,have a good electrocatalytic ability and may last for 50 h.They require just 1.49 V(η50)for total water breakdown.Through this technique,the electrical structure of electrocatalysts may be altered to increase catalytic activity.

Synergistic effect of carbon nanotube and encapsulated carbon layer enabling high-performance SnS_2-based anode for lithium storage

Tin disulfide(SnS_(2)),due to large interlayer spacing and high theoretical capacity,is regarded as a prospective anode material for lithium-ion batteries.Nevertheless,the poor electron conductivity of SnS_(2) and huge volumetric change during the lithiation/delithiation process lead to a rapid capacity decay of the battery,hindering its commercialization.To address these issues,herein,SnS_(2) is in-situ grown on the surface of carbon nanotubes(CNT)and then encapsulated with a layer of porous amorphous carbon(CNT/SnS_(2)@C)by simple solvothermal and further carbonization treatment.The synergistic effect of CNT and porous carbon layer not only enhances the electrical co nductivity of SnS_(2) but also limits the huge volumetric change to avoid the pulverization and detachment of SnS_(2).Density functional theo ry calculations show that CNT/SnS_(2)@C has high Li^(+)adsorption and lithium storage capacity achieving high reaction kinetics.Consequently,cells with the CNT/SnS_(2)@C anode exhibit a high lithium storage capacity of 837mAh/g after 100 cycles at 0.1 A/g and retaining a capacity of 529.8 mAh/g under 1.0 A/g after 1000 cycles.This study provides a fundamental understanding of the electrochemical processes and beneficial guidance to design high-performance SnS_(2)-based anodes for LIBs.

Tailoring local structures of atomically dispersed copper sites for highly selective CO_(2) electroreduction

Atomically‐dispersed copper sites coordinated with nitrogen‐doped carbon(Cu–N–C)can provide novel possibilities to enable highly selective and active electrochemical CO_(2) reduction reactions.However,the construction of optimal local electronic structures for nitrogen‐coordinated Cu sites(Cu–N_(4))on carbon remains challenging.Here,we synthesized the Cu–N–C catalysts with atomically‐dispersed edge‐hosted Cu–N_(4) sites(Cu–N_(4)C_(8))located in a micropore between two graphitic sheets via a facile method to control the concentration of metal precursor.Edge‐hosted Cu–N_(4)C_(8) catalysts outperformed the previously reported M–N–C catalysts for CO_(2)‐to‐CO conversion,achieving a maximum CO Faradaic efficiency(FECO)of 96%,a CO current density of–8.97 mA cm^(–2) at–0.8 V versus reversible hydrogen electrode(RHE),and over FECO of 90%from–0.6 to–1.0 V versus RHE.Computational studies revealed that the micropore of the graphitic layer in edge‐hosted Cu–N_(4)C_(8) sites causes the d‐orbital energy level of the Cu atom to shift upward,which in return decreases the occupancy of antibonding states in the*COOH binding.This research suggests new insights into tailoring the locally coordinated structure of the electrocatalyst at the atomic scale to achieve highly selective electrocatalytic reactions.

1D Ferromagnetic Interaction of 2-Iodo Nitronyl Nitroxide Radical Confirmed by Spin Density Calculation

A supramolecular 1D ferromagnetic system was studied experimentally as well as theoretically.Hybrid density functional theory（DFT） calculations were based on the X-ray analysis.The results of DFT calculations and McConnell mechanism have contributed to the understanding of the factors governing the exchange coupling of magnetism in the crystal packing.Both the experimental evidence and theoretical calculation indicate that spin density in 2-iodo nitronyl nitroxide（INN） radicals confirms 1D ferromagnetic chain with inter-chain antiferromagnetic interaction.

Engineering Two-Phase Bifunctional Oxygen Electrocatalysts with Tunable and Synergetic Components for Flexible Zn-Air Batteries

Metal-air batteries,like Zn-air batteries(ZABs)are usually suffered from low energy conversion efficiency and poor cyclability caused by the sluggish OER and ORR at the air cathode.Herein,a novel bimetallic Co/CoFe nanomaterial supported on nanoflower-like N-doped graphitic carbon(NC)was prepared through a strategy of coordination construction-cation exchange-pyrolysis and used as a highly efficient bifunctional oxygen electrocatalyst.Experimental characterizations and density functional theory calculations reveal the formation of Co/CoFe heterostructure and synergistic effect between metal layer and NC support,leading to improved electric conductivity,accelerated reaction kinetics,and optimized adsorption energy for intermediates of ORR and OER.The Co/CoFe@NC exhibits high bifunctional activities with a remarkably small potential gap of 0.70 V between the half-wave potential(E_(1/2))of ORR and the potential at 10 mA cm^(-2)(E_(j=10))of OER.The aqueous ZAB constructed using this air electrode exhibits a slight voltage loss of only 60 mV after 550-cycle test(360 h,15 days).A sodium polyacrylate(PANa)-based hydrogel electrolyte was synthesized with strong water-retention capability and high ionic conductivity.The quasi-solid-state ZAB by integrating the Co/CoFe@NC air electrode and PANa hydrogel electrolyte demonstrates excellent mechanical stability and cyclability under different bending states.

First-principles calculations of structural, electronic, and thermodynamic properties of ZnO_(1-x)S_x alloys

In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are found to be improved when calculated by using LDA ~ U functional as compared with local density approximation （LDA）. At various concentrations the ground-state properties are determined for bulk materials ZnO, ZnS, and their tertiary alloys in cubic zinc-blende phase. From the results, a minor difference is observed between the lattice parameters from Vegard＇s law and other calculated results, which may be due to the large mismatch between lattice parameters of binary compounds ZnO and ZnS. A small deviation in the bulk modulus from linear concentration dependence is also observed for each of these alloys. The ther- modynamic properties, including the phonon contribution to Helmholtz free energy △F, phonon contribution to internal energy △E, and specific iheat at constant-volume Cv, are calculated within quasi-harmonic approximation based on the calculated phonon dispersion relations.